865 resultados para Case base maintenance
Resumo:
The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole
Resumo:
The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property
Resumo:
In recent years, the area of advanced materials has been considerably, especially when it comes to materials for industrial use, such as is the case with structured porosity of catalysts suitable for catalytic processes. The use of catalysts combined with the fast pyrolysis process is an alternative to the oxygenate production of high added value, because, in addition to increasing the yield and quality of products, allows you to manipulate the selectivity to a product of interest, and therefore allows greater control over the characteristics of the final product. Based on these arguments, in this work were prepared titanium catalysts supported on MCM-41 for use in catalytic pyrolysis of biomass, called elephant grass. The reactions of pyrolysis of biomass were performed in a micro pyrolyzer, Py-5200, coupled to GC / MS, the company CDS Corporation, headquartered in the United States. The catalysts Ti-MCM-41 in different molar ratios were characterized by XRD, TG / DTG, FT-IR, SEM, XRF, UV-visible adsorption of nitrogen and the distribution of particle diameter and specific surface area measurement by the BET method. From the catalytic tests it was observed that the catalysts synthesized showed good results for the pyrolysis reaction.The main products were obtained a higher yield of aldehydes, ketones and furan. It was observed that the best reactivity is a direct function of the ratio Si/Ti, nature and concentration of the active species on mesoporous supports. Among the catalysts Ti-MCM-41 (molar ratio Si / Ti = 25 and 50), the ratio Si / Ti = 25 (400 ° C and 600 ° C) favored the cracking of oxygenates such as acids , aldehydes, ketones, furans and esters. Already the sample ratio Si / Ti = 50 had the highest yield of aromatic oxygenates
Resumo:
Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites
Resumo:
O isolamento e a manutenção de fungos basidiomicetos simbiontes de formigas da tribo Attini tem sido dificultado pela baixa velocidade de crescimento desses fungos, bem como pela presença de muitos microrganismos que vivem na superfície do material que as formigas mantêm no interior nos ninhos como substrato para o crescimento dos seus fungos simbiontes. No presente trabalho nós descrevemos um método que aumenta em mais de sete vezes a eficiência de isolamento desses fungos, quando comparada àquela obtida por procedimentos tradicionais. Ninhos subterrâneos de formigas atíneas dos gêneros Atta, Acromyrmex, Trachymyrmex e Mycetarotes foram localizados e deles foram coletadas amostras contendo fungos simbiontes e formigas, que foram transportadas para o laboratório, onde as formigas foram capazes de limpar a cultura do fungo e estimular o seu crescimento. em seguida, porções dos micélios foram assepticamente coletadas e transferidas para meio Yeast Nitrogen Base contendo glicose e cloranfenicol. Para facilitar a manutenção dos isolados em culturas de laboratório, diferentes nutrientes foram analisados para a elaboração de um meio de cultivo complexo, que possibilitou aumentar a velocidade de crescimento dos fungos e estocá-los por longos períodos. O método foi aplicado com sucesso para os fungos simbiontes de todos os gêneros de formigas estudados, gerando, assim, um procedimento extremamente útil para a formação e manutenção de uma coleção representativa de diferentes fungos simbiontes de formigas da tribo Attini.
Resumo:
The scope of this study directs an investigation in search of how the blind person learns knowledge at school mediated by the image in context of an inclusive education and how it can be (or is) triggered by the adaptation of images to the tactile seizure of the blind person and his correlative process of reading. To achieve this intent we choose a qualitative approach of research and opted for the modality of case study, based on the empirical field of a public school in the city of Cruzeta, RN and as a the main subject a congenitally blind female student enrolled in high school there, focusing, often, on the discipline of geography in its words mapping. Our procedures for construction of data are directly involved to the documentary analysis of open reflective interview and observation. The base guiding theory of our assessments is located in the current understanding about the human psychological development of its educational process inside an inclusive perspective, of contemporary conceptions about the visual disability as well of image as a cultural product. Accordingly, the human person is a concrete subject, whose development is deeply marked by the culture, historically built by human society. This subject regardless of his specific features, grasping the world in an interactive and immediate way, internalising and producing culture. In this thinking, we believe that the blind person perceives in multiple senses the stimuli of his environment and acts in the world toward his integration into the social environment. The image as a product of culture, historically and socially determined, appears as a sign conventionally used as an icon that in itself concentrates knowledge of which the student who does not realize visually himself and his surroundings cannot be excluded. In this direction, the inclusive educational process must build conditions of access to knowledge for all students without distinction, including access to the interpretation of the images originally intended for the seizure strictly visual to other perceptive models. Based in this theory and adopting principles of content analysis, we circulated inside the interpretation of the data constructed from the analysis of documents, from the subject speeches, from records of the observation made in the classroom and other notes of the field daily. In the search for pictures on the school contents, adapted to the tactile seizure of blind student, was seen little and not systematic in practice and teaching at the school. It showed us the itinerary of the student life marked by a succession of supports, most of the time inappropriate and pioneers in cooling the construction of her autonomy. It also showed us the tensions and contradictions of a school environment, supposedly inclusive, that stumbles in search of its intent, in the attitudinal and cumulative barriers brought, because of its aggravating maintenance. These findings arose of crossing data around of a categorization that gives importance to 1) Concepts regarding the school inclusion, 2) Elements of the school organization, educational proposal and teaching practice, 3) Meaning of the visual image as the object of knowledge, 4) Perception in multiple senses and 5) Development and learning of the blind person before impositions of the social environment. In light of these findings we infer that it must be guaranteed to the disabled person removal of the attitudinal barriers that are against his full development and the construction of his autonomy. In that sense, should be given opportunity to the student with visual disability, similarly to all students, not only access to school, but also the dynamics of a school life efficient, that means the seizure of knowledge in all its modalities, including the imagery. To that end, there is a need of the continued training of teachers, construction of a support network in response to all needs of students, and the opportunity to development of reading skills beyond a perspective eminently focused in the sight
Resumo:
This dissertation reports the results of a research which has aimed to analyze the senses attributed to the curriculum by the students of the Technical Course of Computation Maintenance and Support, organized through the Programme of Integration of the the Professional Education with the Basic Education in the Youngster and Adult Education Modality (PROEJA), at Instituto Federal do Rio Grande do Norte (IFRN), Campus Santa Cruz. It has been sought to know who the students are and to investigate their curriculum conceptions, on which the this investigation has been based on. Thus, those senses attributed by the students on their narratives have been compared to the official proposed curriculum for the Programme and to the curriculum implemented by IFRN. The current research follows the qualitative approach being led by a study case and life stories methods. In order to effective that approach, two data collecting instruments have been developed: questionnaires and semi structured interviews. The collected data has been complemented by the legal and institutional documents analysis. This study is derived from the presupposition that PROEJA s students, although are able to access school after the educational system restructuration, are still facing difficulties during their courses because of the excluding and traditional curriculum, decontextualized with their personal and work life, that is, without curriculum integration. This study has accomplished PROEJA s students characterization presenting important data for the integrated curriculum construction at IFRN and revealing that the students consider the Programme as inclusive. Nevertheless, the practices concerned to the democratic construction of the curriculum and its dialogical action indicate partial inclusion, considering that, in order to include those students indeed, it would be necessary to include them to the institutional and academic context. Contradictory situations have been detected on the course pedagogical project, considered traditional and decontextualized, especially regarding to methodological aspects. The research also allowed to increase PROEJA s investigation field as well as to contribute with a better implementation of the Programme as curricular proposal bonded to Basic and Professional Education in the Youngster and Adult Modality Education Modality
Resumo:
A modeling of criterias and alternatives is through and applied a questionnaire based on method AHP to proprietors of gas stations. The considered alternatives had been the maintenance of the current state with electric energy of the deliverer and the generation in small scale based on the natural gas. The used criteria had been Cost of the Investment, Final Cost of the Energy, Operational cost, Ambient Benefits, Risk and Variation of Costs. The study it was carried through in the city of Natal, RN in ranks that make use of the natural as for resale, where the generation alternative on the basis of the available gas is present. The main results evidence in a dimension the viability of use of method AHP with questionnaire by means of validation of the judgments with analysis of variance beyond proper the normal mechanisms of analysis of consistency to the method. The main results of the analysis help to show that in this in case that the profile of models of criteria and judgments of the actors is similar, with the final evidence of that it has a dominance of the maintenance of the energy of the deliverer. The main criterion to influence this decision was the risk
Resumo:
Last century Six Sigma Strategy has been the focus of study for many scientists, between the discoveries we have the importance of data process for the free of error product manufactory. So, this work focuses on data quality importance in an enterprise. For this, a descriptive-exploratory study of seventeen pharmacies of manipulations from Rio Grande do Norte was undertaken with the objective to be able to create a base structure model to classify enterprises according to their data bases. Therefore, statistical methods such as cluster and discriminant analyses were used applied to a questionnaire built for this specific study. Data collection identified four group showing strong and weak characteristics for each group and that are differentiated from each other
Resumo:
The electronic mail service is one of the most Internet services that grow in the corporate environment. This evolution is bringing several problems for the organizations, especially to information that circulates inside of the corporate net. The lack of correct orientation to the people, about the usage and the security importance of these resources, is leaving breaches and causing misusage and overuse of service, for example. In recent literature, it starts to coming out several ideas, which has helped to rganizations how to plain and how to implement the information security system to the electronic mail in computer environment. However, these ideas are still not placed in practice in many companies, public or private. This dissertation tries to demonstrate the results of a research that has like goal, identify the importance that user training has over the information security policy, through a case study inside of private superior education institute in this state. Besides, this work had by basic orientation the ISO/IEC 17799, which talk about People Security. This study was developed over a proposed model to this research, which looked for offer conditions to guide the institution studied, how to plan better a information security policy to the electronic mail. Also, this research has an exploratory and descreptive nature and your type, qualitative. Firstly, it was applied na questionary to the information technology manager, as better way to get some general data and to deepen the contact which still then, it was being kept through e-mail. Thereupon this first contact, eleven interviews were done with the same manager, beside one interview with twenty-four users, among employees e students. After that to collect and transcript the interviews, were review with the manager all informations given, to correct any mistakes and to update that informations, to then, start the data analyze. The research suggests that the institution has a pro attitude about the information security policy and the electronic mail usage. However, it was clear that answers have their perception about information security under a very inexperient way, derived of a planning lack in relation to training program capable to solve the problem
Resumo:
Este trabalho foi conduzido com o objetivo de avaliar o desempenho de matrizes pesadas, submetidas a diferentes programas de alimentação estabelecidos pela aplicação de modelos para predizer as exigências energéticas, após o pico de postura. O experimento foi conduzido no setor de avicultura da UNESP Campus Jaboticabal, com duração de 84 dias (três períodos de 28 dias). Foram utilizadas 740 matrizes de corte Hubbard Hy-Yield e 80 machos Petterson, com 55 semanas de idade. O delineamento foi inteiramente casualizado, com quatro tratamentos e cinco repetições de 37 aves por repetição (box) e um modelo fatorial 4´3 (quatro tratamentos ´ três períodos). Os programas de alimentação avaliados foram: T1 - Fornecimento de ração de acordo com o padrão da linhagem (428 kcal/ave/dia de 55 a 66 semanas de idade); T2 - Redução semanal de energia (2 kcal de EM/ave em cada semana); T3 - Fornecimento de ração de acordo com o modelo de exigência de EM, UNESP (2000); e T4 - Fornecimento de ração de acordo com o modelo, NRC (1994). O programa de alimentação com redução semanal de energia foi adequado para manter os desempenhos produtivo e reprodutivo das aves, indicando a possibilidade de redução de 2 kcal/ave/dia, em cada semana, na alimentação de matrizes pesadas após 55 semanas de idade. Os modelos UNESP e NRC proporcionaram estimativas mais elevadas das exigências energéticas que o modelo padrão, provavelmente em decorrência do ganho de peso das matrizes, que esteve acima do recomendado para a linhagem, promovendo maiores exigências de energia para mantença.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber
Resumo:
Este estudo visou avaliar a variabilidade e distância genética dentro de uma população-base de melhoramento genético de Eucalyptus grandis. A avaliação da variabilidade genética tem como objetivos principais analisar a base genética da população-base e montar um banco de dados marcadores moleculares da população em análise. Essa população é formada por 327 indivíduos, principalmente das procedências de Coff's Harbour, Atherton e Rio Claro. Devido à heterozigosidade natural dessa população, ela pode ser dividida em diversas subpopulações, de acordo com a latitude e longitude de origem; e dentro de subpopulações, em função do grau de melhoramento genético já realizado do material analisado no Brasil. Isso permitiu avaliar quanto da variabilidade detectada dentro da população-base foi devido a esses fatores: procedência e grau de melhoramento. A aplicação da técnica RAPD permitiu avaliar 70 locos polimórficos, que foram analisados utilizando-se o coeficiente de Jaccard, o que resultou em matrizes de similaridade genética entre os indivíduos. Os dados de similaridade genética posteriormente foram submetidos à análise estatística. Osdados indicaram que a população-base apresenta ampla base genética, com média de similaridade genética de 0,328. O subgrupo denominado Região 3, composto por material selvagem da macrorregião de Atherton, juntamente com material de APS da macrorregião de Coff's Harbour, foi um dos que mais contribuíram para a ampla base genética da população-base. Foi possível detectar diferença estatística entre as populações selvagens das procedências de Atherton e Coff's Harbour, assim como entre essas procedências e a de Rio Claro.
Resumo:
Pasture degradation is one of the greatest problems related to land use in the Amazon region, forcing farmers to open new forest areas. Many studies have identified the causes and the factors involved in this degradation process, in an attempt to reverse the situation. The purpose of this study was to examine the relationship between pasture degradation and some soil properties, to try to identify the most significant soil features in the degradation process. A cattle raising farm in the eastern Amazon region, with pastures of different ages and degrees of degradation, was used as the site for this study: a primary forest area, PN; three Guinea grass (Panicum maximum Jacq.) pastures in an increasingly degraded sequence-P1, P2 and P3; one Gamba grass (Andropogon gayanus Kunth) pasture following an extremely degraded Guinea grass pasture, P4. Aboveground phytomass data showed differences between the pastures, reflecting initially observed degradation levels. Grass biomass decreased sharply from P1 to P2 and disappeared at P3. Pasture recovery with Gamba grass at P4 was very successful, with grass biomass higher than P1 and weed biomass smaller than P2 and P3. Root biomass also decreased with pasture degradation. Soil bulk density increased with pasture decrease at the topsoil layer. Results from the soil chemical analysis showed that there were no signs of decrease in organic carbon and total nitrogen after the forest was transformed into pasture. In all pastures, degraded or not, the soil pH, the sum of bases and the saturation degree were higher than in the forest soil. The extractable phosphorus content, lower in forest soil, remained quite stable in pasture soils, but it could become a limiting factor for the maintenance of Guinea grass. Results indicated that pasture degradation does not seem to be directly related to the modification of the chemical features of soils. (C) 2004 Elsevier B.V. All rights reserved.