Development of glass-ceramics from combination of industrial wastes together with boron mining waste

The utilization of borate mineral wastes with glass-ceramic technology was first time studied and primarily not investigated combinations of wastes were incorporated into the research. These wastes consist of; soda lime silica glass, meat bone and meal ash and fly ash. In order to investigate possible and relevant application areas in ceramics, kaolin clay, an essential raw material for ceramic industry was also employed in some studied compositions. As a result, three different glass-ceramic articles obtained by using powder sintering method via individual sintering processes. Light weight micro porous glass-ceramic from borate mining waste, meat bone and meal ash and kaolin clay was developed. In some compositions in related study, soda lime silica glass waste was used as an additive providing lightweight structure with a density below 0.45 g/cm3 and a crushing strength of 1.8±0.1 MPa. In another study within the research, compositions respecting the B2O3–P2O5–SiO2 glass-ceramic ternary system were prepared from; borate wastes, meat bone and meal ash and soda lime silica glass waste and sintered up to 950ºC. Low porous, highly crystallized glass-ceramic structures with density ranging between 1.8 ± 0,7 to 2.0 ± 0,3 g/cm3 and tensile strength ranging between 8,0 ± 2 to 15,0 ± 0,5 MPa were achieved. Lastly, diopside - wollastonite (SiO2-Al2O3-CaO )glass-ceramics from borate wastes, fly ash and soda lime silica glass waste were successfully obtained with controlled rapid sintering between 950 and 1050ºC. The wollastonite and diopside crystal sizes were improved by adopting varied combinations of formulations and heating rates. The properties of the obtained materials show; the articles with a uniform pore structure could be useful for thermal and acoustic insulations and can be embedded in lightweight concrete where low porous glass-ceramics can be employed as building blocks or additive in cement and ceramic industries.

A comparison of acute and long-term effects of industrial multiwalled carbon nanotubes on human lung and immune cells in vitro

The close resemblance of carbon nanotubes to asbestos fibers regarding their high aspect ratio, biopersistence and reactivity increases public concerns on the widespread use of these materials. The purpose of this study was not only to address the acute adverse effects of industrially produced multiwalled carbon nanotubes (MWCNTs) on human lung and immune cells in vitro but also to further understand if their accumulation and biopersistence leads to long-term consequences or induces adaptive changes in these cells. In contrast to asbestos fibers, pristine MWCNTs did not induce overt cell death in A549 lung epithelial cells and Jurkat T lymphocytes after acute exposure to high doses of this material (up to 30 g/ml). Nevertheless, very high levels of reactive oxygen species (ROS) and decreased metabolic activity were observed which might affect long-term viability of these cells. However, the continuous presence of low amounts of MWCNTs (0.5 g/ml) for 6 months did not have major adverse long-term effects although large amounts of nanotubes accumulated at least in A549 cells. Moreover, MWCNTs did not appear to induce adaptive mechanisms against particle stress in long-term treated A549 cells. Our study demonstrates that despite the high potential for ROS formation, pristine MWCNTs can accumulate and persist within cells without having major long-term consequences or inducing adaptive mechanisms.

Plato and Frankfurt: Two Theories of the Relations Between Love and Living Well

This thesis provides a comparison of the ideas of caring and love as they appear in the works of Plato and Frankfurt. Frankfurt, a contemporary philosopher, maintains that an individual arrives at the most meaningful life through understanding what it is that heor she cares about the most. Interestingly, the instances of eros in Plato's Symposium and Phaedrus resonate with this idea. We see throughout these erotic dialogues similarities to Frankfurt's notions of care and love.Throughout his many works, Frankfurt provides us with several distinct features of care and love. This thesis offers an in depth discussion of each of these features andalso provides commentary from other contemporary philosophers who are familiar with Frankfurt's work. In addition, this thesis applies these features of care and love to Plato's erotic dialogues, and emphasizes areas in which Plato and Frankfurt agree and those inwhich they disagree. In essence, it becomes apparent that while there are many similarities between the ideas of these two prominent thinkers, Plato and Frankfurt do not agree about what constitutes the best human life. Plato maintains that the best life is onespent dedicated to philosophy and in pursuit of the 'good'. Frankfurt, on the other hand,imposes no such limitations on what we should consider the best life because people are likely to have different life experiences that lead them to care about and love different things. Instead he suggests that the best or most meaningful human life is one in which a person spends his or her life caring about the things he or she does, indeed, care aboutand loving those things he or she does, indeed, love.

A Longitudinal Analysis of the Relations Among Stress, Depressive Symptoms, Leisure Satisfaction, and Endothelial Function in Caregivers

Stress and depressive symptoms have been associated with impaired endothelial function as measured by brachial artery flow-mediated dilation (FMD), possibly through repeated and heightened activation of the sympathetic nervous system. Behavioral correlates of depression, such as satisfaction with leisure activities (i.e., leisure satisfaction), may also be associated with endothelial function via their association with depressive symptoms. This study examined the longitudinal associations between stress, depressive symptoms, leisure satisfaction, and endothelial function as measured by FMD.

THE POTENTIAL OF INDUSTRIAL WASTE AND AGRICULTURAL FEEDSTOCK TOWARDS SUSTAINABLE BIOFUELS PRODUCTION: TECHNO-ECONOMIC AND ENVIRONMENTAL IMPACT PERSPECTIVES

This Ph.D. research is comprised of three major components; (i) Characterization study to analyze the composition of defatted corn syrup (DCS) from a dry corn mill facility (ii) Hydrolysis experiments to optimize the production of fermentable sugars and amino acid platform using DCS and (iii) Sustainability analyses. Analyses of DCS included total solids, ash content, total protein, amino acids, inorganic elements, starch, total carbohydrates, lignin, organic acids, glycerol, and presence of functional groups. Total solids content was 37.4% (± 0.4%) by weight, and the mass balance closure was 101%. Total carbohydrates [27% (± 5%) wt.] comprised of starch (5.6%), soluble monomer carbohydrates (12%) and non-starch carbohydrates (10%). Hemicellulose components (structural and non-structural) were; xylan (6%), xylose (1%), mannan (1%), mannose (0.4%), arabinan (1%), arabinose (0.4%), galatactan (3%) and galactose (0.4%). Based on the measured physical and chemical components, bio-chemical conversion route and subsequent fermentation to value added products was identified as promising. DCS has potential to serve as an important fermentation feedstock for bio-based chemicals production. In the sugar hydrolysis experiments, reaction parameters such as acid concentration and retention time were analyzed to determine the optimal conditions to maximize monomer sugar yields while keeping the inhibitors at minimum. Total fermentable sugars produced can reach approximately 86% of theoretical yield when subjected to dilute acid pretreatment (DAP). DAP followed by subsequent enzymatic hydrolysis was most effective for 0 wt% acid hydrolysate samples and least efficient towards 1 and 2 wt% acid hydrolysate samples. The best hydrolysis scheme DCS from an industry's point of view is standalone 60 minutes dilute acid hydrolysis at 2 wt% acid concentration. The combined effect of hydrolysis reaction time, temperature and ratio of enzyme to substrate ratio to develop hydrolysis process that optimizes the production of amino acids in DCS were studied. Four key hydrolysis pathways were investigated for the production of amino acids using DCS. The first hydrolysis pathway is the amino acid analysis using DAP. The second pathway is DAP of DCS followed by protein hydrolysis using proteases [Trypsin, Pronase E (Streptomyces griseus) and Protex 6L]. The third hydrolysis pathway investigated a standalone experiment using proteases (Trypsin, Pronase E, Protex 6L, and Alcalase) on the DCS without any pretreatment. The final pathway investigated the use of Accellerase 1500® and Protex 6L to simultaneously produce fermentable sugars and amino acids over a 24 hour hydrolysis reaction time. The 3 key objectives of the techno-economic analysis component of this PhD research included; (i) Development of a process design for the production of both the sugar and amino acid platforms with DAP using DCS (ii) A preliminary cost analysis to estimate the initial capital cost and operating cost of this facility (iii) A greenhouse gas analysis to understand the environmental impact of this facility. Using Aspen Plus®, a conceptual process design has been constructed. Finally, both Aspen Plus Economic Analyzer® and Simapro® sofware were employed to conduct the cost analysis as well as the carbon footprint emissions of this process facility respectively. Another section of my PhD research work focused on the life cycle assessment (LCA) of commonly used dairy feeds in the U.S. Greenhouse gas (GHG) emissions analysis was conducted for cultivation, harvesting, and production of common dairy feeds used for the production of dairy milk in the U.S. The goal was to determine the carbon footprint [grams CO2 equivalents (gCO2e)/kg of dry feed] in the U.S. on a regional basis, identify key inputs, and make recommendations for emissions reduction. The final section of my Ph.D. research work was an LCA of a single dairy feed mill located in Michigan, USA. The primary goal was to conduct a preliminary assessment of dairy feed mill operations and ultimately determine the GHG emissions for 1 kilogram of milled dairy feed.

Public values and perceptions of industrial heritage in the Keweenaw Peninsula, Michigan

The purpose of this research is to assess public values and perceptions concerning industrial heritage in the Keweenaw by studying visitors at an endangered mining site tour. This research presents and analyzes feedback collected directly from participants in the Cliff Mine (Michigan) archaeological field school public tour surveys in June 2011, gathers semi-structured interview data from survey participants and local experts, and synthesizes and collates both survey and interview data. As those who study heritage site visitors have found, in all outreach there is a necessity for deeper understanding of visitors for the outreach to be effective. An appropriate metric for collecting public values and opinions was created and used at the Cliff Mine archaeological field school public tours. To accomplish research goals, an opinion survey was created to collect demographic information and qualitative feedback from visitors at the Cliff Mine field school. The survey, a pre-tour and post-tour question list, found that all visitors who filled out a survey supported preservation and most were adults over 46 years of age. Most visitors were white-collar professionals, identified as local residents, and found out about the tour through the newspaper. Interview questions were constructed to supplement and expand on the visitor survey results. In addition, local experts involved in Keweenaw heritage were interviewed. All interviewees supported heritage preservation but often had conflicting views when activities such as mineral collecting were factored into the preservation question. By analyzing responses to the survey and interviews, improvements to outreach efforts at the Cliff Mine are recommended. Future research should further explore perceptions of social class and identity, and should seek out stakeholders not contacted through this research, in order to improve outreach and include all community groups.