Évaluation des connaissances sémantiques sur les objets et les personnes célèbres dans les stades d��butants de la maladie d'Alzheimer

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Évaluation des connaissances sémantiques sur les objets et les personnes célèbres dans les stades d��butants de la maladie d'Alzheimer

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Il vulcanismo esplosivo : l'isola Ferdinandea: eruzione del 1831 nel mar di Sicilia

Il contenuto di questo volume non vuole rappresentare un testo didattico per lo studio in generale della vulcanologia in quanto in esso si tratta unicamente quell’a-spetto della disciplina che riguarda il vulcanismo esplosivo. In tal senso l’autore ritiene che questo testo possa essere utile per gli studenti di Scienze Geologiche che, vivendo nelle aree vulcaniche italiane di età quaternaria ed anche attive, possano, da laureati, svolgere attività professionali mirate alla individuazione e definizione di Pericolosità, Vulnerabilità e Rischio Vulcanico. Trattare gli argomenti che seguono non è stato facile e forse si poteva, in alcuni casi, renderli più semplici, ma talvolta la semplicità non sempre è sinonimo di precisione; inoltre, per descrivere certi aspetti non quantitativi si è costretti ad utilizzare un linguaggio quanto più possibile “ad hoc”. L’autore ha svolto la propria attività di ricerca in aree vulcaniche, sia in Italia che all’estero. Le ricerche in Italia sono state da sempre concentrate nelle aree di vulcanismo attivo in cui l’attività del vulcanologo è finalizzata fondamentalmente alla definizione della Pericolosità Vulcanica supporto indispensabile per la definizione dell’aree a Rischio Vulcanico, intendendo per Rischio il prodotto della Pericolosità per il Danno in termini, questo, di numero di vite umane ovvero di valore monetario dei beni a rischio nell’area vulcanica attiva. Le ricerche svolte dall’autore in Africa Orientale (Etiopia e Somalia) e nello Yemen hanno contribuito ad assimilare i concetti di vulcanologia regionale, rappresentata dall’ampia diffusione del vulcanismo di plateau, variabile per spessore dai 1500 ai 3000 metri, fra i quali si inseriscono, nella depressione dell’Afar, catene vulcaniche inquadrabili, dal punto di vista geodinamico, come “oceaniche” alcune delle quali attive e che si sviluppano per decine/centinaia di chilometri. Nelle aree vulcaniche italiane le difficoltà che sorgono durante il rilevamento risiedono nella scarsa continuità di affioramenti, talvolta incompleti per la descrizione delle variazioni di facies piroclastiche, non disgiunta dalla fitta vegetazione ovvero ur banizzazione specialmente nelle aree di vulcanismo attivo. Il rilevamento vulcanologico richiede competenze e l’adozione di scale adatte a poter cartografare le variazioni di facies piroclastiche che, a differenza dalle assise sedimentarie, in un’area vulcanica possono essere diffuse arealmente soltanto per alcune centinaia di metri. I metodi di studio delle rocce piroclastiche sono del tutto simili a quelli che si usano per le rocce clastiche, cioè dall’analisi delle strutture e delle tessiture alla litologica fino a quella meccanica; su questi clasti inoltre le determinazioni della densità, della mineralogia e della geochimica (Elementi in tracce e Terre Rare), ottenute sulla frazione vetrosa, rappresentano parametri talvolta identificativi di un’area vulcanica sorgente. Non esistono testi nei quali venga descritto come si debba operare nelle aree vulcaniche per le quali l’unica certezza unificante è rappresentata dall’evidenza che, nelle sequenze stratigrafiche, il termine al top rappresenta quello più relativamente recente mentre quello alla base indica il termine relativo più vecchio. Quanto viene riportato in questo testo nasce dall’esperienza che è stata acquisita nel tempo attraverso una costante azione di rilevamento che rappresenta l’uni- ca sorgente di informazione che un vulcanologo deve ricavare attraverso un attento esame dei depositi vulcanici (dalla litologia alla mineralogia, alla tessitura, etc.) la cui distribuzione, talvolta, può assumere un carattere interegionale in Italia nell’ambito dell’Olocene. Soltanto l’esperienza acquisita con il rilevamento produce, in un’area di vulcanismo attivo, risultati positivi per la definizione della Pericolosità, sapendo però che le aree vulcaniche italiane presentano caratteristiche ampiamente differenti e di conseguenza il modo di operare non può essere sempre lo stesso. Un esempio? Immaginate di eseguire un rilevamento vulcanico prima al Somma-Vesuvio e poi nei Campi Flegrei: sono mondi completamente differenti. L’autore desidera ribadire che questo testo si basa sulla esperienza acquisita sia come geologo sia come docente di Vulcanologia; pertanto il libro potrà forse risultare più o meno bilanciato, in forza dell’argomento trattato, in quanto durante l’attività di ricerca l’autore, come tutti, ha affrontato alcuni argomenti più di altri. Questo approccio può essere considerato valido per chiunque voglia scrivere un libro in maniera autonoma e originale, non limitandosi, come molte volte avviene, a tradurre in italiano un libro su tematiche analoghe diffuso, ad esempio, nel mondo anglosassone.Diversamente, si sarebbe potuto concepire un libro come un collage di capitoli scritti da vari autori, che magari avevano esperienza più specifica nei singoli argomenti, ma in tal senso si sarebbe snaturato lo spirito con cui si è impostato il progetto. L’autore, infine, ha fatto ricorso al contributo di altri autorevoli colleghi solo per temi importantissimi, ma in qualche modo complementari rispetto al corpus costitutivo del Vulcanismo Esplosivo.

Developing a vision for an nD modelling tool

The design of a building is a complicated process, having to formulate diverse components through unique tasks involving different personalities and organisations in order to satisfy multi-faceted client requirements. To do this successfully, the project team must encapsulate an integrated design that accommodates various social, economic and legislative factors. Therefore, in this era of increasing global competition integrated design has been increasingly recognised as a solution to deliver value to clients.----- The ‘From 3D to nD modelling’ project at the University of Salford aims to support integrated design; to enable and equip the design and construction industry with a tool that allows users to create, share, contemplate and apply knowledge from multiple perspectives of user requirements (accessibility, maintainability, sustainability, acoustics, crime, energy simulation, scheduling, costing etc.). Thus taking the concept of 3-dimensional computer modelling of the built environment to an almost infinite number of dimensions, to cope with whole-life construction and asset management issues in the design of modern buildings. This paper reports on the development of a vision for how integrated environments that will allow nD-enabled construction and asset management to be undertaken. The project is funded by a four-year platform grant from the Engineering and Physical Sciences Research Council (EPSRC) in the UK; thus awarded to a multi-disciplinary research team, to enable flexibility in the research strategy and to produce leading innovation. This paper reports on the development of a business process and IT vision for how integrated environments will allow nD-enabled construction and asset management to be undertaken. It further develops many of the key issues of a future vision arising from previous CIB W78 conferences.

Information technology support to improved construction processes : inter-disciplinarity in research and practice

Research and innovation in the built environment is increasingly taking on an inter-disciplinary nature. The built environment industry and professional practice have long adopted multi and inter-disciplinary practices. The application of IT in Construction is moving beyond the automation and replication of discrete mono and multi-disciplinary tasks to replicate and model the improved inter-disciplinary processes of modern design and construction practice. A major long-term research project underway at the University of Salford seeks to develop IT modelling capability to support the design of buildings and facilities that are buildable, maintainable, operable, sustainable, accessible, and have properties of acoustic, thermal and business support performance that are of a high standard. Such an IT modelling tool has been the dream of the research community for a long time. Recent advances in technology are beginning to make such a modelling tool feasible.----- Some of the key problems with its further research and development, and with its ultimate implementation, will be the challenges of multiple research and built environment stakeholders sharing a common vision, language and sense of trust. This paper explores these challenges as a set of research issues that underpin the development of appropriate technology to support realisable advances in construction process improvements.

Does a high UV environment ensure adequate vitamin D status?

This study assesses the Vitamin D status of 126 healthy free-living adults aged 18–87 years, in southeast Queensland, Australia (27°S) at the end of the 2006 winter. Participants provided blood samples for analysis of 25(OH)D (the measure of an individual’s Vitamin D status), PTH, Calcium, Phosphate, and Albumin, completed a questionnaire on sun-protective/sun-exposure behaviours, and were assessed for phenotypic characteristics such as skin/hair/eye colour and BMI. We found that 10.2% of the participants had serum 25(OH)D levels below 25 nmol/l (considered deficient) and a further 32.3% had levels between 25 nmol/l and 50 nmol/l (considered insufficient). Our results show that low levels of 25(OH)D can occur in a substantial proportion of the population at the end of winter, even in a sunny climate. 25(OH)D levels were higher amongst those who spent more time in the sun and lower among obese participants (BMI > 30) than those who were not obese (BMI < 30). 25(OH)D levels were also lower in participants who had black hair, dark/olive skin, or brown eyes, when compared with participants who had brown or fair hair, fair skin, or blue/green eyes. No associations were found between 25(OH)D status and age, gender, smoking status, or the use of sunscreen.

Investigating the links between muscle strength, sun exposure, dietary vitamin D intake and the vitamin D status of ambulatory older adults in South East Queensland

Vitamin D deficiency and insufficiency are now seen as a contemporary health problem in Australia with possible widespread health effects not limited to bone health1. Despite this, the Vitamin D status (measured as serum 25-hydroxyvitamin D (25(OH)D)) of ambulatory adults has been overlooked in this country. Serum 25(OH)D status is especially important among this group as studies have shown a link between Vitamin D and fall risk in older adults2. Limited data also exists on the contributions of sun exposure via ultraviolet radiation and dietary intake to serum 25(OH)D status in this population. The aims of this project were to assess the serum 25(OH)D status of a group of older ambulatory adults in South East Queensland, to assess the association between their serum 25(OH)D status and functional measures as possible indicators of fall risk, obtain data on the sources of Vitamin D in this population and assess whether this intake was related to serum 25(OH)D status and describe sun protection and exposure behaviors in this group and investigate whether a relationship existed between these and serum 25(OH)D status. The collection of this data assists in addressing key gaps identified in the literature with regard to this population group and their Vitamin D status in Australia. A representative convenience sample of participants (N=47) over 55 years of age was recruited for this cross-sectional, exploratory study which was undertaken in December 2007 in south-east Queensland (Brisbane and Sunshine coast). Participants were required to complete a sun exposure questionnaire in addition to a Calcium and Vitamin D food frequency questionnaire. Timed up and go and handgrip dynamometry tests were used to examine functional capacity. Serum 25(OH)D status and blood measures of Calcium, Phosphorus and Albumin were determined through blood tests. The Mean and Median serum 25-Hydroxyvitamin D (25(OH)D) for all participants in this study was 85.8nmol/L (Standard Deviation 29.7nmol/L) and 81.0nmol/L (Range 22-158nmol/L), respectively. Analysis at the bivariate level revealed a statistically significant relationship between serum 25(OH)D status and location, with participants living on the Sunshine Coast having a mean serum 25(OH)D status 21.3nmol/L higher than participants living in Brisbane (p=0.014). While at the descriptive level there was an apparent trend towards higher outdoor exposure and increasing levels of serum 25(OH)D, no statistically significant associations between the sun measures of outdoor exposure, sun protection behaviors and phenotypic characteristics and serum 25(OH)D status were observed. Intake of both Calcium and Vitamin D was low in this sample with sixty-eight (68%) of participants not meeting the Estimated Average Requirements (EAR) for Calcium (Median=771.0mg; Range=218.0-2616.0mg), while eighty-seven (87%) did not meet the Adequate Intake for Vitamin D (Median=4.46ug; Range=0.13-30.0ug). This raises the question of how realistic meeting the new Adequate Intakes for Vitamin D is, when there is such a low level of Vitamin D fortification in this country. However, participants meeting the Adequate Intake (AI) for Vitamin D were observed to have a significantly higher serum 25(OH)D status compared to those not meeting the AI for Vitamin D (p=0.036), showing that meeting the AI for Vitamin D may play a significant role in determining Vitamin D status in this population. By stratifying our data by categories of outdoor exposure time, a trend was observed between increased importance of Vitamin D dietary intake as a possible determinant of serum 25(OH)D status in participants with lower outdoor exposures. While a trend towards higher Timed Up and Go scores in participants with higher 25(OH) D status was seen, this was only significant for females (p=0.014). Handgrip strength showed statistically significant association with serum 25(OH)D status. The high serum 25(OH)D status in our sample almost certainly explains the limited relationship between functional measures and serum 25(OH)D. However, the observation of an association between slower Time Up and Go speeds, and lower serum 25(OH)D levels, even with a small sample size, is significant as slower Timed Up and Go speeds have been associated with increased fall risk in older adults3. Multivariable regression analysis revealed Location as the only significant determinant of serum 25(OH)D status at p=0.014, with trends (p=>0.1) for higher serum 25(OH)D being shown for participants that met the AI for Vitamin D and rated themselves as having a higher health status. The results of this exploratory study show that 93.6% of participants had adequate 25(OH)D status-possibly due to measurement being taken in the summer season and the convenience nature of the sample. However, many participants do not meet their dietary Calcium and Vitamin D requirements, which may indicate inadequate intake of these nutrients in older Australians and a higher risk of osteoporosis. The relationship between serum 25(OH)D and functional measures in this population also requires further study, especially in older adults displaying Vitamin D insufficiency or deficiency.

Investigating erythemal UV exposure and vitamin D production in the urban canyon

Exposure to ultraviolet radiation (UV) results in both damaging and beneficial health outcomes. Excessive UV exposure has been linked to many skin and eye problems, but moderate exposure induces vitamin D production. It has been reported that humans receive 90-95% of their vitamin D from production that starts after UV exposure. Although it is possible to acquire vitamin D through dietary supplementation, the average person receives very little in this manner. Therefore, since most people acquire their vitamin D from synthesis after exposure to UV from sunlight, it is very important to understand the different environments in which people encounter UV. This project measured UV radiation and in-vitro vitamin D production in the urban canyon and at a nearby suburban location. The urban canyon is an environment consisting of tall buildings and tropospheric air pollution, which have an attenuating effect on UV. Typically, UV measurements are collected in areas outside the urban canyon, meaning that at times studies and public recommendations do not accurately represent the amount of UV reaching street-level in highly urbanized areas. Understanding of UV exposure in urban canyons becomes increasingly important as the number of people working and living in large cities steadily increases worldwide. This study was conducted in the central business district (CBD) of Brisbane, Australia, which models the urban canyons of large cities around the world in that it boasts a great number of tall buildings, including many skyscrapers, meaning that most areas only see a small amount of direct sunlight each day. During the winter of 2007 measurements of UV radiation and in-vitro vitamin D production were collected in the CBD and at a suburban site approximately 2.5km outside the CBD. Air pollution data was obtained from a central CBD measurement site. Data analysis showed that urban canyon measurements of both UV radiation and in-vitro vitamin D production were significantly lower than those collected at the suburban site. These results will aid both future researchers and policy makers in better understanding human UV exposure in Brisbane’s CBD and other urban canyons around the world.

"Her lively Looks a sprightly Mind disclose, Quick as her Eyes, and as unfix'd as those." - looking, fashion media, and risk culture

This chapter investigates the phenomenon of fashion from the perspective of ‘the look.’ This is achieved by the wearer (as opposed to the designer) and also forms the basis of fashion media, where it represents the ‘decisive moment’ of photography. The chapter argues that the evolving ‘look’ of fashion can be analysed to identify tensions between novelty and emulation, the unique and the universal, in contemporary consumer culture and status-based social-network markets. It explores the work of fashion photographer Corinne Day and artist Olga Tobreluts to identify the theme of ‘risk culture.’