Análise da Conformidade e Caracterização da Matéria- Prima Empregada na Fabricação de Blocos Cerâmicos na Região Metropolitana de Salvador

The potential market of the metropolitan area of Salvador accounts for the estimated consumption of roughly 800 million horizontally perforated extruded clay bricks a year. The growing demand of consumers along with the competitiveness of the structural ceramic sector has driven forward a number of recent efforts and investments towards improving the quality of structural ceramics. In this scenario, the present study focused on sampling and evaluating the conformity of 8-hole horizontally perforated extruded clay bricks manufactured by different plants (A, B and C) in the metropolitan area of Salvador. In addition, representative clay and sandy-clay materials were collected from each plant and characterized by conventional physical, chemical and mineralogical techniques. Finally, experimental compositions designated as A, B and C, according to the source, were prepared by mixing different contents of the raw materials collected in the plants, fired at different temperatures and characterized. The results revealed a series of non conformities regarding ABNT guidelines. The characterization of raw materials revealed the presence of kaolinite and ilite in concentrations ranging from 64 to 90 wt.% along with free quartz (10 - 25%). The sandy-clay samples consisted basically of kaolinite. All raw materials depicted low contents of organics, amorphous constituents, alkaline oxides and feldspar. An analysis of the firing behavior of all different ceramic compositions revealed that the linear contraction of composition A was rather significant considering the temperature range evaluated, and it justifies the significant dimensional non conformity that was shown by bricks made with the ceramic A

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise

Desenvolvimento de um núcleo versátil e integrado de ferramentas CAD/CAE para a modelagem e simulação de peças mecânicas

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented

Estudo da viabilidade técnica do uso das argilas da região do agreste potiguar para produção de peças cerâmicas: caracterização e formulação

In recent decades, ceramic products have become indispensable to the technological development of humanity, occupying important positions in scientific production and consequently in industrial production. One area of the economy that continues to absorb large amounts of the products of this sector is Construction. Among the branches of the ceramic industry, there are the red ceramic industry which is traditionally the basis of that economic sector. Among the reasons for which the red ceramic industry became popular in the country, and specifically in Rio Grande do Norte, is the abundance of this raw material, easily found throughout the national territory. However, it appears that the red ceramic industry has deficiencies in technology and skilled labor, resulting in the production of ceramic goods with low added value. Among the factors that determine the quality of the ceramic products red has the proper formulation of the ceramic mass, the conformation and the firing temperature. Thus, the overall goal of this work is to study the mineralogical and technological properties, two clays from the region of the Wasteland Potiguar industrial ceramist. Therefore, the raw materials were characterized by analysis of Xray diffraction (XRD) analysis, X-ray fluorescence (XRF), particle size analysis (FA), scanning electron microscopy (SEM), optical microscopy (OM ), plasticity index (PI), thermal gravimetric analysis (TGA) and differential thermal analysis (DTA). The technological properties of the material were analyzed by water absorption tests (AA%) porosity (% PA), the linear shrinkage (RT%), apparent density (MEA), loss on ignition (PF%) and flexural strength three points (TRF)

Desenvolvimento e teste de um protótipo de reator de plasma com gaiola catódica rotatória para nitretação em lote de pequenas peças

The technique of ion nitriding, despite being fully consolidated in the industry, has great limitations when applied to the treatment of small parts. This is because effects that occur due to non-uniformity of the electric field, generate localized heating in parts, damaging the uniformity of nitrided layer. In addition, because the samples are treated static parts thereof are untreated. To expand the use of plasma nitriding, this work presents the development, assembly and testing of a prototype plasma reactor with rotatory cathodic cage [patent pending], able to meet these needs, giving the material a uniform treatment and opening doors to industrial scale production. The samples tested with hexagonal nuts are 6.0 mm in diameter, made of stainless steel AISI 304 nitrided at a pressure of 1 mbar in an atmosphere of 20% H2 + 80% N2 for 1 h. After treatment, testing visual inspection, optical microscopy and microhardness were carried out to check the effectiveness of the process for uniformity and hardness of the parts. All samples exhibited uniform color, and matte brownish, unlike the untreated samples, silver color and gloss. The hardness of the surface (top and sides) was 65% and even higher than the original hardness. The nitrided layer showed great uniformity in microstructure and thickness. It is concluded, therefore, that the unit was effective constructed for the purposes for which it was designed

Avaliação do ciclo térmico de conformação por compressão de peças em poli(sulfeto de fenileno) reforçado com fibras contínuas de carbono

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

As Faces e os Disfaces da Informalidade no Capitalismo Conteporâneo: Um Estudo do Comércio de Rua em Pau dos Ferros/RN

This paper discusses the expression of informality in contemporary capitalism. Thematic of relevance to the analysis of the reality of work today and the logic that moves the capital, its real presence in the lives of individuals. The street trading of Pau dos Ferros town, popularly known as "street market" was chosen as the search space. The main objective is to seize and examine the articulations and logic, present in the configuration of the street trading of this city, located in the state of Rio Grande do Norte, explaining the functionality of informality for capitalist accumulation, but also for the reproduction of segments of the working class. Our analysis is based in the perspective of totality, trying to grasp the historical determinations of the phenomenon in focus. It includes the analysis of the mechanisms used by the capital to reproduce itself in the current historical context, which has been implicated in the composition of the labor markets of different countries and in various forms of exploitation to which workers in general are subject. It also means discussing the development of capitalism in Brazil, the logic that permeates its dependence, and especially the use of over-exploitation of labor, as a lever for internal accumulation. The course of investigation consisted of theoretical research to form the basis of theoretical and methodological analysis and to outline the context in which our research object is inserted, and field research conducted in two phases: systematic observation, which allowed to map traders features and the infrastructure of commerce, and the conduction of interviews with key informants. The material collected was scrutinized according to analytical scheme inspired by the content analysis. Among the main considerations developed from the research process we include: the street trading of Pau dos Ferros remains shrouded in the majority sale of agricultural products, this demonstrates the structural characteristics of the region. However, the supply of this product is no longer restricted to the excess of small local producers. The presence of the dealer changed the distribution of the product, streamlining it. In parallel, business practices are developed, practices in which traded goods (industrial) reflect the moment of capitalist restoration, a larger business network. The reflections also made it possible to show that street trading follows developing on the basis of informal work, which gains functionality to the system, as it is configured as a space commonly used to drain part of the production, of industries (clothing/shoes), especially if the distribution is considered as an essential element of the complex process that aims at capital appreciation. This activity has been functioning as a place of employment and income generation for the subjects who are away from formal employment, masking, this way, unemployment, moreover, they allow them to continue as consumers. Such expressions reflect the ability and the logic of capital to expand and aggregate into so many realities. It is underway today, the logic that has led many workers to join the project of domination of capital, by the illusory chance to become capitalists. The aim has been to turn the subject into a consumer and the worker an enterprising

O planejamento turístico e o comércio ambulante : uma análise à luz da teoria das representações sociais

The Social Representation Theory provides subsidies to scientifically analyze what is called common sense, suggesting that thought be given credibility to the individual, from the assignment of logic to it. The Representations allow us to interpret, understand, explain and thus classify information, events and people. In this sense, this study aimed to analyze how social representations of the actors of the intinerant traders who operate in Ponta Negra/RN can be used as an element for tourism planning. To achieve the desired goals, we conducted a qualitative study, from a descriptive study, using methods of data collection the research literature, the technique of free association of words and the questionnaire, applied with 90 intinerant traders who work in Ponta Negra/RN beach. As tools of data analysis were used to analyze literature, and software EVOC and SPHINX. This research has revealed the predominance of people in itinerant male, between 18 and 28 years, with incomplete primary education, no contributors of Previdência Social and working seven days a week. The core elements of representations brings that explain that their knowledge is guided by collectively shared knowledge in the culture of tourism, which is seen as something that brings economics benefits (money) to the society, from the travel and entertainment. The plan represents the forward thinking, based on development plans that seek improvements and organization. The structure and operation of tourism planning in Natal/RN, there were no representation of intinerant traders. It is concluded that understanding the needs of itinerant traders provides grants to developing strategies for the development of tourism. This is achieved from its inclusion in tourism planning, since it enables tourism managers to understand how they are capturing, interpreting and acting on their next reality, since these representations are fundamental in forming opinions and the establishment of individual attitudes and collective. Thus, it is an important theory to be used to subsidize social research with individuals living reality and local needs, but which is the margin of decision-making processes of economic in the Brazil

Comércio internacional e meio ambiente: estímulo à produção sustentável ou mero protecionismo comercial a posição do Brasil em dois casos de litígio

The World Trade Organization (WTO) was established in 1994 as a result of the Uruguay Round, and has as its principal aim advocate for the maintenance of free trade between nations. The preamble of its Constitutive Agreement specifically cites as an institution the goal of achieving sustainable development and the pursuit of protecting and preserving the environment, bringing into the sphere of world trade the idea that concern for the environmental cause is not restricted only the group of environmentalists, but rather has entered the economic landscape in a way not only ideological, but also pragmatic. The General Agreement on Tariffs and Trade (GATT) 1947, part of the GATT 1994, contains a device that allows the adoption of trade restrictive measures, provided that such measures aimed at protecting the environment - Article XX. The Settlement Body (DSB) is part of the WTO and acts in dissolving disputes between the countries motivated by trade. It examines two cases where countries have imposed restrictive trade measures with environmental justification. The first case was closed in 1996, with award of damages given to Brazil, on the breakdown of U.S. environmental legislation imposed on imported gasoline from Brazil - and the second, begun in 2005 and closed in 2007, coming out victorious again Brazil is on the import ban on retreaded tires to Brazil. The objective is to answer the question: how the environment is treated in the midst of trade discussions - which is aimed at its protection or its use with economic objectives in disguise? For the preparation of this work, extensive documentary research was undertaken with the virtual site of the WTO to review the entire production of legal cases and subsequent analysis of the key issue for the work, and literature of authors who have studied the tense relationship between trade international environment. The first case, it could be seen that the political movement performed by the U.S. with the aim of achieving acceptable standards of air quality was an institutional effort to ensure the quality of air, and thus would be inappropriate to say that the regulation of gasoline was merely a disguised trade barrier.However, a careful analysis of the implementation and operation of gasoline regulation may reveal intentions disguised trade and U.S. environmental argument did not hold. The weight of this environment was relegated, since there were clearly outside interests to the environmental cause. The second case, it was realized that, despite clear attempts by the EC to promote ecological dumping, send when brought to Brazil, supposedly a country with weaker environmental structure on surveillance, a residue that, pursuant to internal policies, as could not be sent to their own landfills, the Brazilian discourse remained focused on the environmental cause, and this sort there was the existence of disguised trade barriers, but of importance, at least a priori, the discussion of foreign forces on the environment environment because there is no way to legally justify the reversal of the total understanding of the first judging body, the sight of all the arguments presented by Brazil and the nonsubmission of new facts upon appeal. Still, quite heartening to reflect on the role of trade liberalization on the environment in general, because, while they do not reach a definitive conclusion will reveal positions in both directions, both for and against, the that only adds to the discussions and makes this a very fertile topic for future research

A dinâmica territorial do comércio varejista moderno da Zona Norte de Natal/RN

This work studies the territorial dynamics of the trade modern retailer in the North Zone of Natal/RN, undertaken by the expansion of that following of the tertiary section in the researched space. For so much, we accomplished bibliographical and documental research during whole the process of construction of the work and the field research based close to in interviews the responsible for the establishments of the modern retail and application of questionnaires with the residents and consumers of the area in subject. Leaving of the understanding that the territory is used by the society producing the movement of capitalist reproduction in the places, we inferred that the expansion of the modern retail in the North Zone has been promoting a new dynamics in your territory, fact that has been valuing the space and attracted investors to the place. Therefore, we organized the study in this dissertation in three chapters: the first, "North Zone: use and occupation of the soil ", brings us the process of historical and social formation of the North Zone inserted in the context of the urban expansion of Natal; the second chapter, " Expansion of the tertiary section: the growth of the modern retail trade in the North Zone", makes direct reference to the tertiary section and the expansion of the I trade modern retailer; and finally, the third surrender, " The territorial dynamics and the modern retail trade in the North Zone of Natal", in which we expose all the results of the field research, looking for to understand the territorial dynamics that the expansion of the modern retail trade has been producing in the study area

O Circuito inferior da economia urbana em Mossoró: a dinâmica do comércio ambulante

This study was based on the analysis and understanding of the dynamics of the lower circuit of the economy and the size of the street trading in the city of Mossoro (RN). The operationalization of the theory of the two circuits of the urban economy, based on Santos (2008a) was essential to understand the street trading as part of the entire city of Mossoro. It was given emphasis on the study of the lower circuit of the economy and its coverage in the street trading in the commercial center of the city, specifically in street trading in Coronel Gurgel. The dynamics of that street reveals the different ways that the territory is used simultaneously by different social actors as pedestrians, consumers, business owners, and especially by street vendors. These vendors occupy the spaces along the streets of the city commercial center, placing their tents or stalls, especially on sidewalks, excellent strategic locations for the marketing of their products, due to the large influx of people seeking goods and services nearby. As methodological and technical procedures for gathering primary data, we opted for the use of questionnaires and interviews, with many users of the lower circuit, both consumers and vendors. The analysis of these questionnaires, along with the theoretical background, has revealed that there are several social and political conflicts related to the use of public spaces, such as sidewalks and flowerbeds, in the city commercial center, and that these conflicts are increasingly demonstrating that vendors need a space endowed with infrastructure to conduct their activities. The lack of efficiency of the government, as well as the slowness of their actions to organize a space that is able to properly fit salespersons, constitutes one of the main problems faced by these small traders who have limited financial resources and materials to get their activities through in the globalized world. At the same time, this study revealed the importance of these agents, as the last link of the urban economy, in the distribution of various consumer goods, enabling the satisfaction of some needs of the population, especially the poorer people

Poder local e o funcionamento do comércio vicinal na cidade de São Paulo (1765-1822)

Este texto apresenta algumas hipóteses e idéias sobre o comércio de abastecimento da cidade de São Paulo, entre os anos 1765-1822, através de dados quantitativos e qualitativos levantados em dois conjuntos documentais produzidos pelo Senado da Câmara: Atas e Papéis Avulsos. Este comércio é entendido como um dos circuitos do organismo colonial, conforme proposto por José Roberto do Amaral Lapa. Neste sentido, vem sendo constatado seu funcionamento autônomo, de acordo com os fluxos do mercado interno, as ações dos negociantes-arrematadores de contratos e as reações do Senado da Câmara de São Paulo para enfrentar seus contextos de crise e a radicalização de relações de poder em torno deste circuito mercantil, como fator desencadeador de disputas e hostilidades entre interesses políticos locais, negociantes-arrematadores e autoridades régias.

Subsistemas de comércio costeiros e internalização de interesses na dissolução do Império Colonial português (Santos, 1788-1822)

Discutem-se os primeiros resultados de uma pesquisa sobre o comércio costeiro e suas relações com o funcionamento do sistema colonial e com o contexto da Independência. A tese é de que em portos menores da costa da capitania de São Paulo, como em Santos, havia um grupo de comerciantes que atuava efetivamente no comércio costeiro e defendeu seus interesses de exclusividade de participação nesse setor contra a presença de comerciantes externos à vila. A discussão apoia-se em documentos da alfândega de Santos, como mapas de exportação-importação, mapas de embarcações, ofícios de governadores e juízes da alfândega e requerimentos de negociantes estrangeiros.

Efeitos de modelagem do comportamento verbal e de instruções sobre o comportamento de encaixar peças

Pesquisas têm demonstrado diferenças nos efeitos dos comportamentos verbais modelado e instruído sobre o comportamento verbal e não-verbal. Este estudo investigou efeitos da modelagem do comportamento verbal e das instruções sobre o comportamento verbal (falar sobre encaixar peças) e o não-verbal (encaixar peças azuis e vermelhas, grandes e pequenas e quadradas e circulares) de 10 crianças, entre 8 e 9 anos de idade. A coleta de dados foi realizada em duas condições com cinco participantes. Condição 1: modelagem do comportamento verbal. Condição 2: apresentação de instruções para o comportamento não-verbal. Quando ocorreu a modelagem do comportamento verbal foram observadas mudanças correspondentes no comportamento não-verbal. As instruções produziram imediata adesão do comportamento não-verbal e, na seqüência, o desempenho foi alterado. Esses dados reafirmam a importância de ampliar o conhecimento dos efeitos da modelagem do comportamento verbal e das instruções sobre o comportamento de crianças em jogos como o utilizado nesta pesquisa.

Estudo morfológico e radiológico sobre a comunicação entre a articulação interfalangeana distal e a bolsa do osso navicular em peças anatômicas de eqüinos (Equus caballus, L. 1758)

Objetivou-se neste estudo verificar anatômica e radiograficamente a existência de comunicação entre a bolsa do osso navicular (BN) e a articulação interfalangeana distal (AID), estabelecendo sua freqüência e forma e identificando as estruturas anatômicas envolvidas no processo. Desta forma, foram utilizadas 140 peças anatômicas de membros torácicos e pélvicos de eqüinos. Com o auxílio de fluoroscópio, foi injetada uma mistura de contraste iodado, Neoprene látex e corante na BN dos membros direito e na AID dos membros esquerdos, com subseqüentes exposições radiográficas. Constatadas comunicações, identificavam-se as estruturas e os locais envolvidos, mediante técnica de dissecação. Verificou-se, em duas observações, comunicação entre a BN e a AID, após injeção de contraste iodado, látex e corante na bolsa do osso navicular, sendo um no membro torácico direito (MTD) e outro no membro pélvico direito (MPD). Comunicação entre a AID e a bainha do tendão do músculo flexor profundo do dedo (BTMFPD) ocorreu em uma peça, pertencente ao membro torácico esquerdo (MTE). Comunicação entre a BN e a BTMFPD foi observada na peça de um membro torácico direito. Variações morfológicas nas extremidades laterais da BN, constituindo projeções que se estendiam até o terço proximal da falange média, sendo mais pronunciada na face lateral do que na medial, ocorreram em cinco membros. Mediante a administração de contraste iodado, látex e corante na AID, nenhuma comunicação foi observada entre a AID e a BN.