Estudo da estabilidade térmica de adoçantes naturais e artificiais

Sweeteners provide a pleasant sensation of sweetness that helps the sensory quality of the human diet, can be divided into natural sweeteners such as fructose, galactose, glucose, lactose and sucrose, and articial sweeteners such as aspartame, cyclamate and saccharin. This work aimed to study the thermal stability of natural and artificial sweeteners in atmospheres of nitrogen and syntetic air using thermogravimetry (TG), derivative thermogravimetry (DTG), Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC). Among the natural sweeteners analyzed showed higher thermal stability for the lactose and sucrose, which showed initial decomposition temperatures near 220 ° C, taking advantage of the lactose has a higher melting point (213 ° C) compared to sucrose (191 ° C). The lower thermal stability was observed for fructose, it has the lowest melting point (122 °C) and the lower initial decomposition temperature (170 °C). Of the artificial sweeteners studied showed higher thermal stability for sodium saccharin, which had the highest melting point (364 ° C) as well as the largest initial decomposition temperature (466 ° C under nitrogen and 435 ° C in air). The lower thermal stability was observed for aspartame, which showed lower initial decomposition temperature (158 ° C under nitrogen and 170 ° C under air). For commercial sweeteners showed higher thermal stability for the sweeteners L and C, which showed initial temperature of thermal decomposition near 220 ° C and melting points near 215 ° C. The lower thermal stability was observed for the sweetener P, which showed initial decomposition temperature at 160 ° C and melting point of 130 °C. Sweeteners B, D, E, I, J, N and O had low thermal stability, with the initial temperature of decomposition starts near 160 °C, probably due to the presence of aspartame, even if they have as the main constituent of the lactose, wich is the most stable of natural sweeteners. According to the results we could also realize that all commercial sweeteners are in its composition by at least a natural sweeteners and are always found in large proportions, and lactose is the main constituent of 60% of the total recorded

Avaliando o impacto da utilização de renderizações panorâmicas para a navegação em ambientes virtuais

Panoramic rendering is the visualization of three-dimensional objects in a virtual environment through a wide viewing angle. This work investigated if the use of panoramas is able to promote faster searches in a virtual environment. Panoramas allow the presentation of space through less need to change the orientation of the camera, especially for the case of projections spanning 360º surrounding the user, which can benefit searching. However, the larger the angle, more distorted is the visualization of the environment, causing confusion in navigation. The distortion is even bigger when the user changes the pitch of the camera, by looking up or down. In this work we developed a technique to eliminate specifically the distortions caused by changes in pitch, which was called hemispheric projection. Experiments were done to evaluate the performance of search navigation through perspective, cylindrical and hemispherical projections. The results indicate that navigating with perspective projection is superior than navigating with panoramic projections, possibly due to factors such as (i) lack of experience of the participants in understanding the scenes displayed as panoramas, (ii) the inherent presence of distortion in panoramic projections and (iii) a lower display resolution because the objects are presented in smaller sizes in panoramic projections, making the perception of details more difficult. However, the hemispherical projection was better than the cylindrical, indicating that the developed technique provides benefits for navigation compared to current techniques of panoramic projection. The hemispheric projection also provided the least amount of changes of camera orientation, which is an indication that the hemispheric projections may be particularly useful in situations where there are restrictions on the ease to change the orientation. Future research will investigate the performance of cameras interactions on slower devices, such as using only keyboard, or brain-machine interfaces

Cryopreservation effects on domestic cat epididymal versus electroejaculated spermatozoa

Frozen-thawed epididymal spermatozoa have already been successfully used in artificial insemination in the domestic cat, proving to be a valuable resource for the reproduction of felid species, which are threatened with extinction. The aim of this study was to compare the effects of freezing and thawing on domestic cat semen collected by electroejaculation (EL) and from the epididymides (EP) and vasa deferentia. Ten adult cats were anesthetized, electroejaculated and immediately thereafter, orchiectomized. Epididymal spermatozoa were collected through the compression of caudae epididymidis and vasa deferentia. Spermatozoa were frozen-thawed following a single protocol. Sperm motility, sperm progressive status (0-5), plasma membrane integrity and morphology (light and transmission electron microscope) were assessed on two occasions, immediately after collection and after freezing and thawing. There were no significant differences between the electroejaculated and epididymal fresh or frozen-thawed spermatozoa for any of the variables. However, the incidence of acrosome defects after freezing and thawing increased by 19% based on light microscopy, whereas ultrastructural images revealed acrosome damages in most sperm cells. Since these acrosomal changes are known to affect sperm fertilising capacity, further studies are needed to optimize cryopreservation techniques for epididymal as well as electroejaculated domestic cat spermatozoa. (c) 2006 Elsevier B.V. All rights reserved.

Effects of forest fragmentation, anthropogenic edges and fruit colour on the consumption of ornithocoric fruits

We investigated effects of fruit colour (red, black or white), habitat (anthropogenic edges and forest interior) and fragment size on the removal of artificial fruits in semideciduous forests in south-east Brazil. Eight forest fragments ranging from 251 to 36,000 ha were used. We used artificial fruits, which were placed on shrubs between I and 2 m in height and checked after 48 and 96 h for peck marks in the fruits. All three variables affected the probability of consumption of our fruit models. Red and black fruits were statistically more pecked than the white fruits. The probability of fruit consumption was lower in the interior than at the edge and less in small than in large fragments. However, the decrease fruit consumption in small compared with large fragments was more accentuated for red and black fruits than for white fruits. Our results show that habitat reduction and edges affect the chances of a fruit being eaten by birds, which may ultimately affect plant fitness in forest fragments. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Karyotypic diversification and its contribution to the taxonomy of Eleocharis (Cyperaceae) from Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Orientação espacial em adultos com deficiência visual: efeitos de um treinamento de navegação

O objetivo deste estudo foi demonstrar se um programa de navegação pode ajudar indivíduos com deficiência visual a melhorar a acurácia na orientação dinâmica. Nove participantes com deficiência visual retornaram a um ponto de partida após percorrer rotas em linha reta e triangular. Pré e pós-avaliações foram feitas entre um período de 4 meses, durante o qual o treinamento com navegação foi realizado. Entre pré e pós-teste, erros relativos de desvios angulares (ERDA) foram diferentes apenas na tarefa em linha reta. O valor de ERDA foi maior na tarefa em linha reta possivelmente por causa da magnitude do giro inicial antes de retornar ao ponto de partida (i.e., 180º) em contraste com a tarefa triângulo (i.e., 45º). Conclui-se que, em tarefas de orientação, os erros no desvio angular dependem da amplitude do giro inicial ao retornar para o ponto de partida. Ainda, a acurácia na manutenção da direção é influenciada por um treinamento específico com navegação.

Comparison of accuracy between compression- and injection-molded complete dentures

Statement of problem. A clinically significant incisal pin opening may occur after processing complete dentures if a compression molding technique is used. To recover the proper vertical dimension of occlusion, a time-consuming occlusal adjustment is necessary that often destroys the anatomy of the artificial teeth. A new injection molding process claims to produce dentures that require few, if any, occlusal adjustments in the laboratory after processing.Purpose. This laboratory study compared incisal pin opening, dimensional accuracy, and laboratory working time for dentures fabricated by this new injection system with dentures constructed by the conventional compression molding technique.Material and methods. Two groups of 6 maxillary and 6 mandibular dentures were evaluated as follows: group 1 (control), Lucitone 199, compression molded with a long cure cycle; and group 2, Lucitone 199, injection molded with a long cure. Incisal pin opening was measured with a micrometer immediately after deflasking. A computerized coordinate measuring machine was used to measure dimensional accuracy of 3-dimensional variations in selected positions of artificial teeth in 4 stages of denture fabrication. Analysis of variance (ANOVA) and t tests were performed to compare the groups.Results. A significant difference was found in pin opening between groups (t test). Horizontal dimensional changes evaluated with repeated measures ANOVA revealed no significant differences between groups. However, analysis of vertical dimensional changes disclosed significant differences between the groups. There was no appreciable difference in laboratory working time for flasking and molding denture bases between the injection and compression molding techniques when polymethyl methacrylate resin was used.Conclusion. The injection molding method produced a significantly smaller incisal pin opening over the standard compression molding technique. The injection molding technique, using polymethyl methacrylate, was a more accurate method for processing dentures. There were no appreciable differences in laboratory working time between the injection and compression molding techniques.

Controlling the Eccentricity of Polar Lunar Orbits with Low-Thrust Propulsion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da testosterona no desenvolvimento de Chrysomya albiceps (Wiedemann) (Diptera: Calliphoridae)

Medico-Legal or Forensic Entomology can be defined as the application of the study of insects and other arthropods which, in association with criminalistic processes, have the the purpose of desovering useful information for an investigation. Nowadays, the insects are a reliable alternative for toxicological analysis, especially when tissues and liquids usually required for this purpose are absent, once insects store some ingested substances which can change their growth rate, being this a relevant fact in the determination of the cause and the time since death. Previous experiments in our laboratory on the testosterone effects on body decomposition suggested that this hormone could interfere in the cadaveric fauna development. With the objective of investigating testosterone influence on the Chrysomya albiceps larval development, a common species in cadaveric fauna, an experimental study was done from eggs of a laboratory maintained colony of this species. The eggs were divided in four groups of 30 and put in glass flasks with 50g of artificial diet in each of them, with testosterone being added in two of them. The larvae were weighted each 12 h during all interval of the larval growing. The studied larvae did not present any difference in the stages of development, but larvae from the experimental group had 5 times the weight of the larvae from the control group and with bigger size. This result shows a significant influence of testosterone in the growth of C. albiceps.

How FTAI and FTET impact reproductive efficiency of Brazilian dairy herds

Background: Throughout dairy cows evolution, milk production was always the key point to select the superior animal. Currently, several evidences has shown that high milk production have intensively contributed to the decline of dairy cattle fertility. Beyond milk production, dairy cows have their reproductive performance impaired by another factors, heat stress and repeat-breeding. Methods like fixed time artificial insemination and embryo transfer were developed to minimize the effects of these factors, and improve dairy herds profitability. This review aims to show some key-point experiments conducted to improve the efficiency of the self-appointed protocols for artificial insemination and embryo transfer in Brazil, overcoming several reproductive problems. Our goal is to develop cheap and easy self-appointed programs that facilitate animal handling and maximize their reproductive outcomes all over the year. Review: Failure in estrus detection is the mainly limiting factor for the use of artificial insemination in high-production dairy herd. An excellent alternative to overcome the need of estrus detection is fixed time artificial insemination. Many protocols with and without the use of estradiol have been developed to that end. Among the protocols for fixed time artificial insemination without estradiol, DoubleOvsynch has been extensively used recently in American dairy herds. In Brazil, similar pregnancy rate was obtained compared to progesterone-estradiol based protocols for fixed time artificial insemination. Particularities of progesterone-estradiol based protocols as (1) new progesterone device or devices previously used for eight days; (2) different doses of eCG; and (3) the use of estradiol cypionate for fixed time artificial insemination have been studied in Brazil. The use of self-appointed artificial insemination also enabled the reduction of the interval calving-conception compared to cows inseminated following the standing estrus. Regarding the low fertility of repeat breeders and the effect of heat stress at early pregnancy, other methods like embryo transfer became important tools to enhance reproductive efficiency of Brazilian dairy herds. Protocols were also developed to allow fixed time embryo transfer, eliminating the need of estrus detection and improving the reproductive efficiency of lactating recipients. As well as described for fixed time artificial insemination treatments, there is a large variety of hormone combination for fixed time embryo transfer (with and without estradiol). An experiment conducted in Brazil demonstrated that protocols for fixed time embryo transfer without estradiol can be as good as with estradiol to synchronize high-producing Holstein recipients, essentially during summer. Particularities related to embryos cryopreservation, synchronization of the estrus cycle of donors and recipients and the site of embryo release into the uterine horn were also investigated. Greater conception rates were achieved when fresh embryos were transferred compared to frozen-thawed ones. Also, the tight synchronization between donor and recipient (same day of estrus) resulted more pregnancies than when recipients were one day later or in advantage in relation to donors. Moreover, the site of embryo release into the uterine horn (ipsilateral to the corpus luteum) had no effect on pregnancy rates after in vivo produced embryo transfer. Conclusion: Both fixed time artificial insemination and fixed time embryo transfer are important tools to improve reproductive efficiency of high-producing dairy cows. These biotechnologies help bypassing some of the greatest challenges of dairy cattle reproduction: the difficulties of estrus detection, and the low fertility associated to heat stress and repeat breeding.

As contribuições da ciência cognitiva à composição musical

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de funções para modelagem do efeito da refratação ionosférica na propagação dos sinais GPS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Entre o semear e a próxima colheita: uma análise dos escritos de Lenin sobre a questão agrário-camponesa

Pós-graduação em Ciências Sociais - FFC

Avaliação da influência do selante de superfície sobre a translucidez de resina composta. Efeito de tempos e soluções

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Irradiação e refrigeração na conservação de bananas prata e nanica climatizadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)