ANALISE ANTIGENICA DE PROTEASES DE DIFERENTES CEPAS DE TRICHOMONAS VAGINALIS ISOLADAS DE PACIENTES DA REGIAO DE ARARAQUARA, SP, BRASIL

Trichomonas vaginalis is the flagellate that causes trichomonadiasis, a sexually transmitted disease. Immunological methods have been proposed for the study of antigenic characterization using strains isolated from different patients. This work compares protease profiles from the different strains using gelatin containing polyacrylamide gels to analyse the protease activity. High molecular weight proteases (20 to 100 kDa) were found on gels showing quantitative differences. Human IgG antiproteases were detected by immunoblotting using the same extracts. These proteases could be related with T. vaginalis pathogenesis.

O uso das fractais e multifractais na analise geografica

The fractal and multifractal approaches in the geographical analysis. This paper results from a bibliographical research showing the applications of the fractal and multifractal approaches in the geographical studies. At first describes some text books about fractals and, after, focuses the works did concerned with Physical Geography, Meteorology, Climatology, Geomorphology, Pedology and Human Geography.

Analise de desempenho de observadores de estado robustos na localizacao de falhas

The state observers can reconstruct and monitor unmeasurable states. A new concept of fault detection and isolation using state observers is presented. The method selects the parameters from components that may fail during the process and constructs optimized robust observers. To isolate component failures via robust observation, a bank of detection observers is organized, in which each observer is only sensitive to one specified component failure while robust to all other component failures. This paper analyzes the performance of transient and steady-state behavior of the state observer.

Analise citotoxica de esparfloxacino e seus produtos de degradaçao em células mononucleares humanas

Sparfloxacin, a difluorquinolone derivative, is a potent antibacterial agent active against a wide range of gram-positive and gram-negative organisms including Streptococcus pneumoniae, Staphylococcus aureus, methicillin resistant S. aureus, Legionella spp, Mycoplasma spp; Chlamydia spp. and Mycobacteria. A drawback of fluorquinolones is their photoreactivity. Sparfloxacin has been studied in terms of therapeutic activities. However, few reports about analytical methods of sparfloxacin are available in the literature. The aim of this study was to determine cytotoxic effects, using sparfloxacin reference substance (SPAX-SR), sparfloxacin tablets (SPAX-COMP) and sparfloxacin tablets submitted UV light during 36 hours (SPAX-COMP.36) solution, and two isolated products (7 and 9) of SPAX-SR submitted UV-C light, in concentrations of 31.25, 62.5, 125 and 250 μg/mL by in vitro mononuclear humane culture cells. The results, statistically analyzed by Teste de Tukey, showed SPAX, SPAX-COMP and SPAX-COMP.36 solutions could reduce the cells number in these conditions. These results could not be observed for products 7 or 9. These results can suggest that isolated product can be less cytotoxic than SPAX-SR, is method can also be used to identified products degradation of sparfloxacin in stability study. However, the low activity achieved with sparfloxacin submitted to UV-light is a source of concern and requires further investigation about its photodegradation mechanism.

Modal Analysis of a Beam with a Tip Rotor by Using a Fundamental Response

The shape modes of a damped-free beam model with a tip rotor are determined by using a dynamical basis that is generated by a fundamental spatial free response. This is a non-classical distributed model for the displacements in the transverse directions of the beam which turns out to be coupled through boundary conditions due to rotation. Numerical calculations are performed by using the Ritz-Rayleigh method with several approximating basis.

Modal representation of three-phase lines applying two transformation matrices: Evaluation of its eigenvectors

The objective of this paper is to show an alternative representation in time domain of a non-transposed three-phase transmission line decomposed in its exact modes by using two transformation matrices. The first matrix is Clarke's matrix that is real, frequency independent, easily represented in computational transient programs (EMTP) and separates the line into Quasi-modes α, β and zero. After that, Quasi-modes a and zero are decomposed into their exact modes by using a modal transformation matrix whose elements can be synthesized in time domain through standard curve-fitting techniques. The main advantage of this alternative representation is to reduce the processing time because a frequency dependent modal transformation matrix of a three-phase line has nine elements to be represented in time domain while a modal transformation matrix of a two-phase line has only four elements. This paper shows modal decomposition process and eigenvectors of a non-transposed three-phase line with a vertical symmetry plane whose nominal voltage is 440 kV and line length is 500 km. ©2006 IEEE.

An alternative procedure to decrease the dimension of the frequency dependent modal transformation matrices: Application in three-phase transmission lines with a vertical symmetry plane

The objective of this paper is to show an alternative representation in time domain of a non-transposed three-phase transmission line decomposed in its exact modes by using two transformation matrices. The first matrix is Clarke's matrix that is real, frequency independent, easily represented in computational transient programs (EMTP) and separates the line into Quasi-modes α, β and zero. After that, Quasi-modes α and zero are decomposed into their exact modes by using a modal transformation matrix whose elements can be synthesized in time domain through standard curve-fitting techniques. The main advantage of this alternative representation is to reduce the processing time because a frequency dependent modal transformation matrix of a three-phase line has nine elements to be represented in time domain while a modal transformation matrix of a two-phase line has only four elements. This paper shows modal decomposition process and eigenvectors of a non-transposed three-phase line with a vertical symmetry plane whose nominal voltage is 440 kV and line length is 500 km. © 2006 IEEE.

An efficient modal control strategy for the active vibration control of a truss structure

In this paper an efficient modal control strategy is described for the active vibration control of a truss structure. In this approach, a feedback force is applied to each mode to be controlled according to a weighting factor that is determined by assessing how much each mode is excited by the primary source. The strategy is effective provided that the primary source is at a fixed position on the structure, and that the source is stationary in the statistical sense. To test the effectiveness of the control strategy it is compared with an alternative, established approach namely, Independent Modal Space Control (IMSC). Numerical simulations show that with the new strategy it is possible to significantly reduce the control effort required, with a minimal reduction in control performance. © 2007 - IOS Press and the authors. All rights reserved.

Modal transformation obtained from Clarke's matrix - Asymmetrical three-phase case

Some constant matrices can be used as phase-mode transformation matrices for transposed three-phase transmission lines. Clarke's matrix is one of these options. Its application as a phase-mode transformation matrix for untransposed three-phase transmission lines has been analyzed through error and frequency scan comparisons. Based on an actual untransposed asymmetrical three-phase transmission line example, a correction procedure is applied searching for better results from the Clarke's matrix applicaton as a phase-mode transformation matrix. The error analyses are carried out using Clarke's matrix and the new transformation matrices obtained from the correction procedure. Applying Clarke's matrix, the relative errors of the eigenvalue matrix elements can be considered negligible and the relative values of the off-diagonal elements are significant. If the the corrected transformation matrices are used, the relative values of the off-diagonal elements are decreased. Based on the results of these analyses, the homopolar mode is more sensitive to the frequency influence than the two other modes related to three-phase lines. © 2007 IEEE.

Analise da relação entre escorregamento e formas de vertentes no município de cubatão (SP) e seus arredores

The city of Cubatão is a densely populated area with high industrial activity. In the area there are also important linear works as roads, railways, pipelines, aqueducts and lines of transmission of energy. The geological and geomorphological features of the municipality, combined with the human activities, make the site an area heavily prone to the landslides, so a region at high risk. In this work, landslide scars were extracted in aerial photos from 1985 and 1994, years that recorded a high incidence of landslides. Quantitative analysis of the relationship between the occurrence of scars and the forms of tracks were conducted, based on an intensive survey of scars in the region, represented by 2595 extracted scars, with the aim of contributing to a better understanding of the slipping processes in the Serra do Mar paulista and thus to the reduction of risks in the region. Achievements have concluded that the greatest percentage of slides in the region is linked to the strands straitght, followed by convex, which confirms previous studies conducted in the region, in a qualitative way or with a much lower number of scars.

Representation of transmission lines in modal domain using analytical transformation matrices

The phases of a transmission line are tightly coupled due to mutual impedances and admittances of the line. One way to accomplish the calculations of currents and voltages in multi-phase lines consists in representing them in modal domain, where its n coupled phases are represented by their n propagation modes. The separation line in their modes of propagation is through the use of a modal transformation matrix whose columns are eigenvectors associated with the parameters of the line. Usually, this matrix is achieved through numerical methods which does not allow the achievement of an analytical model for line developed directly in the phases domain. This work will show the modal transformation matrix of a hypothetical two-phase obtained with numerical and analytical procedures. It will be shown currents and voltage s at terminals of the line taking into account the use of modal transformation matrices obtained by using numerical and analytical procedures. © 2011 IEEE.

Real-time estimation of transmission line impedance based on modal analysis theory

The objective of this paper is to show a methodology to estimate the longitudinal parameters of transmission lines. The method is based on the modal analysis theory and developed from the currents and voltages measured at the sending and receiving ends of the line. Another proposal is to estimate the line impedance in function of the real-time load apparent power and power factor. The procedure is applied for a non-transposed 440 kV three-phase line. © 2011 IEEE.

Educagao fisica escolar e sedentarismo infantil: Uma analise comportamental'

There have been many researchers dedicating themselves to analyze behavior to get solutions to social problems. The practice of childhood sedentary lifestyle is a complex problem that evokes a public health concern. This article exposes a work field in which researches identify, describe and analyze verbal reports about effective contingencies at school. It introduces the practices of three teachers of physical education and their 62 students. The results suggest that actions that can support public policies toward mitigating health risks.

Proposal of a simplified process to correct the phase decoupling using modal analysis

Modal analysis is widely approached in the classic theory of transmission line modeling. This technique is applied to model the three-phase representation of conventional electric systems taking into account their self and mutual electrical parameters. However the methodology has some particularities and inaccuracies for specific applications which are not clearly described in the basic references of this topic. This paper provides a thorough review of modal analysis theory applied to line models followed by an original and simple procedure to overcome the possible errors embedded in the modal decoupling through the three-phase system modeling. © 2012 IEEE.

Simplified computational routine to correct the modal decoupling in transmission lines and power systems modelling

Modal analysis is widely approached in the classic theory of power systems modelling. This technique is also applied to model multiconductor transmission lines and their self and mutual electrical parameters. However, this methodology has some particularities and inaccuracies for specific applications, which are not clearly described in the technical literature. This study provides a brief review on modal decoupling applied in transmission line digital models and thereafter a novel and simplified computational routine is proposed to overcome the possible errors embedded by the modal decoupling in the simulation/ modelling computational algorithm. © The Institution of Engineering and Technology 2013.