Threshold behaviour of L x-ray excitation in Xe - Ag collisions

In the collision system Xe - Ag, the thresholds for excitation of quasimolecular L radiation and characteristic Ag L radiation have been found to lie at about 5 MeV and 1 MeV, respectively. These results are discussed on the basis of ab initio calculations of the screened interaction potential and the electron-correlation diagram.

Calculation of Franck-Condon factors including anharmonicity: simulation of the C2 H4+ X̃2B 3u←C2 H4X̃1 Ag band in the photoelectron spectrum of ethylene

Our new simple method for calculating accurate Franck-Condon factors including nondiagonal (i.e., mode-mode) anharmonic coupling is used to simulate the C2H4+X2B 3u←C2H4X̃1 Ag band in the photoelectron spectrum. An improved vibrational basis set truncation algorithm, which permits very efficient computations, is employed. Because the torsional mode is highly anharmonic it is separated from the other modes and treated exactly. All other modes are treated through the second-order perturbation theory. The perturbation-theory corrections are significant and lead to a good agreement with experiment, although the separability assumption for torsion causes the C2 D4 results to be not as good as those for C2 H4. A variational formulation to overcome this circumstance, and deal with large anharmonicities in general, is suggested

Síntesi, estructura i reactivitat de nous complexos de Cu, Ag i Ni contenint lligands triazamacrocíclics. Aplicacions en l'activació d'enllaços

· S'ha preparat i caracteritzat una família de complexos de Cu(III) contenint lligands triazamacrocíclics, estudiant-se les seves propietats estructurals, espectroscòpiques i redox. Aquesta àmplia família de complexos tenen un gran interès perquè permeten descriure les propietats dels complexos de Cu en un estat d'oxidació poc habitual i a més ens han permès mesurar de manera quantitativa l'efecte Meyerstein. · Una nova família de complexos de Cu(I) amb els lligands triazamacrocíclics es sintetitzada i caracteritzada per tècniques espectroscòpiques i estructurals, demostrant que aquests complexos presenten diferents estructures a l'estat sòlid i en dissolució. Així doncs, mentre que en dissolució es demostra per RMN que es tracta d'una espècie monomèrica, la determinació estructural per difracció de raigs X d'aquests complexos de Cu(I), ens confirma la formació d'espècies polimèriques. Per altra banda, s'ha estudiat la seva reactivitat; a) la seva implicació en la formació de lligands deuterats mitjançant l'intercanvi H/D en condicions suaus i b) la formació de complexos bisfenoxo a partir de la reactivitat entre els corresponents complexos de Cu(I) i oxigen molecular. De la mateixa manera, s'ha preparat el corresponent anàleg de Ag(I) en estat sòlid, obtenint la formació d'un polímer de Ag(I), el qual presenta a l'estat sòlid una estructura en forma de ziga-zaga, diferent a l'estructura del polímer de Cu(I), que és lineal. · S'ha determinat i proposat el mecanisme que té lloc en l'activació de l'enllaç C-H i posterior reacció de transferència per tal d'estabilitzar els productes finals mitjançant una reacció de desproporció. El seguiment de la reacció té lloc mitjançant tècniques espectroscòpiques com UV-vis. Dit seguiment, ens permet determinar les diferents influències electròniques sobre la reacció de formació dels complexos organometàl·lics de Cu(III). A més a més, el seguiment de la reacció a baixa temperatura ens permet determinar espectroscòpica i teòricament la formació d'un intermedi de Cu(II), i mitjançant la determinació dels paràmetres cinètics i termodinàmics es proposa un mecanisme de reacció. Posteriorment, s'ha assajat la reactivitat d'una sal de Cu(II) amb un lligand macrocíclic que conté un grup metil en el carboni orientat cap al centre del macrocicle, implicant la formació d'un intermedi agòstic. De la determinació estructural d'aquest intermedi de CuII i del lligand protonat, s'extreuen una sèrie de conclusions molt interessants, com són la demostració estructural de l'activació de l'enllaç C-C en la primera etapa de formació i de manera anàloga poder comparar-ho amb els sistemes macrocíclics HL2-HL6, demostrant la possible formació d'un intermedi agòstic, on es produeix l'activació de l'enllaç C-H. Aquesta similitud estaria d'acord amb els sistemes HL2-HL6, els quals espectroscòpica i teòricament s'havia detectat la presència d'un intermedi de característiques similars. Degut a l'acidesa d'aquest protó, i gràcies a la presència d'una base com és el propi lligand, aquest podia ésser extret donant lloc a la formació dels corresponents organometàl·lics de Cu(III). Dita estructura també representa un dels pocs exemples d'un organometàl·lic de CuII, un estat d'oxidació poc conegut dins d'aquest camp. · S'ha descrit la reactivitat dels nous complexos organometàl·lics de Cu(III), els quals sota medi pròtic i en condicions àcides o neutres són espècies totalment estables, però en condicions bàsiques o reductores aquestes espècies reaccionen donant lloc a la formació de noves espècies de tipus bisfenoxo, on el Cu es troba en estat d'oxidació +2. S'han caracteritzat mitjançant difracció de RX, on es s'observa l'entorn químic del Cu, la geometria del complex bisfenoxo i l'hidroxilació de l'anell aromàtic. · Finalment, s'ha descrit per primera vegada la síntesi i caracterització d'uns nous complexos organometàl·lics de Ni. Aquests són sintetitzats en base als càlculs teòrics realitzats sobre els nostres sistemes macrocíclics. Per aquests complexos hem investigat l'efecte del metall, canviant el coure per altres metalls de la primera sèrie de transició (Mn, Fe, Co, Ni, Cu, Zn) i de la segona sèrie de transició (Ru, Rh, Pd, Ag). Els resultats demostren que el Ni(II), és el metall que presenta una major capacitat de l'activació de l'enllaç C-H en aquests sistemes aromàtics. Aquests compostos s'oxiden lentament cap a complexos de Ni(III). Per altra banda, l'addició d'una sal de clor sobre una solució d'un complex de Ni(II) permet aïllar el corresponent complex de Ni(III), caracteritzat per ressonància de spin electrònic

Decoration of au and ag nanoparticles on self-assembling pseudopeptide-based nanofiber by using a short peptide as capping agent for metal nanoparticles

The surface of a nanofiber that is formed from a self-assembling pseudopeptide has been decorated by gold and silver nanoparticles that are stabilized by a dipeptide. Transmission electron microscopic images make the decoration visible. In this paper, a new strategy of mineralizing a pseudopeptide based nanofiber by gold and silver nanoparticles with use of a two-component nanografting method is described.

Chemoselective catalytic hydrogenation of acrolein on Ag(111): effect of molecular orientation on reaction selectivity

The adsorption and hydrogenation of acrolein on the Ag(111) surface has been investigated by high resolution synchrotron XPS, NEXAFS, and temperature programmed reaction. The molecule adsorbs intact at all coverages and its adsorption geometry is critically important in determining chemoselectivity toward the formation of allyl alcohol, the desired but thermodynamically disfavored product. In the absence of hydrogen adatoms (H(a)), acrolein lies almost parallel to the metal surface; high coverages force the C=C bond to tilt markedly, likely rendering it less vulnerable toward reaction with hydrogen adatoms. Reaction with coadsorbed H(a) yields allyl alcohol, propionaldehyde, and propanol, consistent with the behavior of practical dispersed Ag catalysts operated at atmospheric pressure: formation of all three hydrogenation products is surface reaction rate limited. Overall chemoselectivity is strongly influenced by secondary reactions of allyl alcohol. At low H(a) coverages, the C=C bond in the newly formed allyl alcohol molecule is strongly tilted with respect to the surface, rendering it immune to attack by H(a) and leading to desorption of the unsaturated alcohol. In contrast with this, at high H(a) coverages, the C=C bond in allyl alcohol lies almost parallel to the surface, undergoes hydrogenation by H(a), and the saturated alcohol (propanol) desorbs.

Ag dopedWO(3)-based powder sensor for the detection of NO gas in air

WO3-based materials as sensors for the monitor of environmental gases such as NO2 (NO + NO2) have been rapidly developed for various potential applications (stationary and mobile uses). It has been reported that these materials are highly sensitive to NOx with the sensitivity further enhanced by adding precious group metals (PGM such as Pt, Pd, Au, etc.). However, there has been limited work in revealing the sensing mechanism for these gases over the WO3-based sensors. In particular, the role of promoter is not yet clear though speculations on their catalytic, electronic and structural effects have been made in the past. In parallel to these PGM promoters here we report,for the first time, that Ag promotion can also enhance WO3 sensitivity significantly. In addition, this promotion decreases the optimum sensor temperature of 300 degreesC for Most WO3-based sensors, to below 200 degreesC. Characterizations (XRD, TEM, and impedance measurement) reveal that there is no significant bulk structure change nor particle size alteration in the WO3 phases during the NO exposure. However, it is found that the Ag doping creates a high concentration of oxygen vacancies in form of coordinated crystallographic shear (CS) planes onto the underneath WO3. It is thus proposed that the Ag particle facilitates the oxidative conversion of NO to NO2 followed by a subsequent NO2 adsorption on the defective WO, sites created at the Ag-WO3 interface; hence, accounting for the high molecular sensitivity. (C) 2002 Elsevier Science B.V. All rights reserved.

Simple linear asymmetrical complexes of silver(I): NC-Ag-NH3 and Br-Ag-NH3

The compounds Ag(CN)(NH3) and Ag(Br)(NH3) are remarkable in that they form solids containing the simple molecular units NC-Ag-NH3 and Br-Ag-NH3, rather than extended solids, and are the first examples of simple linear asymmetric complexes of silver(I).

A fluxional (CuN2O2)-N-I core: binding of a keto oxygen atom to Cu-I and Ag-I

[Cu(2-acetylpyridine)(2)]ClO4 (1), characterised here, has a novel Cu'N202 core in the solid state. Variable-temperature H-1 NMR studies show that the two chelate rings open up in solution at room temperature and the keto oxygen atoms dangle freely. As the temperature is lowered, the 0 atoms tend to bind to the metal atom. The corresponding silver(I) complex, [Ag(2-acetylpyridine)2]ClO4 (4), characterised by single-crystal X-ray crystallography, has an (AgN2)-N-I core in the solid state as well as in solution. Thus, while 1 is fluxional, 4 is not. In cyclic voltammetry, complex 1 displays a quasireversible Cu-II/I couple with a half-wave potential of 0.40 V vs. SCE. Complex I is easily oxidised by air and H2O2 in methanol to give rise to a dinuclear copper(II) complex where the ligand framework is not simple acetylpyridine. ((c) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2005).

Ag(I) and Cu(I) complexes of tetramethyldiphosphinedisulfide: synthesis and structure

Reaction of [M(NCCH3)(4)][PF6] (M = Ag, Cu) with the S2P2Me4 ligand in dichloromethane solution led to substitution of all the nitrile ligands by two molecules of the sulfur ligand, affording the new species [Ag(S2P2Me4)(2)][PF6] (1) and [Cu(S2P2Me4)(2)][PF6] (2). The structures of these complexes were determined by single crystal X-ray diffraction. showing the expected tetrahedral coordination around each metal. Density functional theory (DFT) calculations confirmed the different geometries and energies of the free and coordinated ligand, and provided a very good reproduction of the experimental structures, both for Ag and Cu. The lengths of the S=P bonds are barely affected by coordination, indicating that the pi bond is not important in binding to the metal. (C) 2002 Elsevier Science B.V. All rights reserved.

Cu(I) and Ag(I) complexes of chalcogenide derivatives of the organometallic ligand dppf and the dppa analogue

New Cu(I) and Ag(I) complexes were prepared by reaction of [M(NCCH3)(4)][X] (M = Cu or Ag; X = BF4 or PF6) with the bidentate chalcogenide ligands Ph2P(E)NHP(E)Ph-2 (E = S, S(2)dppa; E = Se, Se(2)dppa), and dpspf (1, 1'-bis(diphenylselenophosphoryl)ferrocene). Copper and silver behaved differently. While three molecules of either S(2)dppa and Se(2)dppa bind to a distorted tetrahedral Cu-4 cluster, with deprotonation of the ligand, 1:2 complexes of the neutral ligands are formed with Ag(l), with a tetrahedral coordination of the metal. The [Cu-4{Ph2P(Se)NP(Se)Ph-2}(3)](+) clusters assemble as dimers, held together by weak Se...Se distances interactions. Another dimer was observed for the [Ag(dpspf)](+) cation, with two short Ag...Se distances. DFT and MP2 calculations indicated the presence of attracting interactions, reflected in positive Mayer indices (MI). The electrochemistry study of this species showed that both oxidation and reduction took place at silver. (C) 2004 Elsevier B.V. All rights reserved.

2,2-Dialkyl-2H-benzimidazoles, the high energy tautomers of the corresponding 1,2-dialkyl-1H-benzimidazoles. Syntheses and their complexes with Cu(I) and Ag(I)

Reaction of Cu(1,2-phenylenediamine)(2)(ClO4)(2) with neat RR'=O (R = methyl and/or ethyl) (lives Cu(2,2-dialkyl-2H-benzimidazole)ClO4. demetallation of which by the action of aqueous ammonia yields Pure 2,2-dialkyl-2H-benzimidazoles. These are characterised by NMR. hi the X-ray crystal Structure, Ag(2,2-methyl-2H-benzimi-dazolc)NO3 is Found to be a spiral 1D coordination polymer where the 2H-benzimidazole acts as an N,N bridge between two Ag(I) centus. Although 2H-benzimidazoles are very unstable in the free state, they are quite stable in their Cu(I)(1) and Ag(I) complexes. The 1,2-tautomerisation in imidazole and benzimidazole have been Studied by means of transition state calculations at B3LYP/6-3 11 +G(2d,p)* level.

Deprotection, tethering, and activation of a one-legged metalloporphyrin on a chemically active metal surface: NEXAFS, Synchrotron XPS, and STM study of [SAc]P-Mn(III)Cl on Ag(100)

The structural and reactive properties of the acetyl-protected "one-legged" manganese porphyrin [SAc]P-Mn(III)Cl on Ag(100) have been studied by NEXAFS, synchrotron XPS and STM Spontaneous surface-mediated deprotection occurs at 300 K accompanied by spreading of the resulting thio-tethered porphyrin across the metal surface Loss of the axial chlorine ligand occurs at 498 K, without any demetalation of the macrocycle, leaving the Mn center in a low co-ordination state At low coverages the macrocycle is markedly tilted toward the silver surface, as is the phenyl group that forms part of the tethering "leg". In the monolayer region a striking transition occurs whereby the molecule rolls over, preserving the tilt angle of the phenyl group, strongly increasing that of the macrocycle, decreasing the apparent height of the molecule and decreasing its footprint, thus enabling closer packing These findings are in marked contrast with those previously reported for the corresponding more rigidly bound four-legged porphyrin [Turner, M., Vaughan, O. P. H., Kyriakou, G., Watson, D. J., Scherer, L. J; Davidson, G J. E, Sanders, J. K. M.; Lambert, R. M J. Am. Chem Soc 2009, 131, 1910] suggesting that the physicochemical :)properties and potential applications of these versatile systems should be strongly dependent on the mode of tethering to the surface.

Deprotection, tethering, and activation of a catalytically active metalloporphyrin to a chemically active metal surface: [SAc](4)P-Mn(III)Cl on Ag(100)

The adsorption and subsequent thermal chemistry of the acetyl-protected manganese porphyrin, [SA(C)](4)P-Mn(III)Cl on Ag(100) have been studied by high resolution XPS and temperature-programmed desorption. The deprotection event, leading to formation of the covalently bound thioporphyrin, has been characterized and the conditions necessary for removal of the axial chlorine ligand have been determined, thus establishing a methodology for creating tethered activated species that could serve as catalytic sites for delicate oxidation reactions. Surface-mediated acetyl deprotection occurs at 298 K, at which temperature porphyrin diffusion is limited. At temperatures above similar to 425 K porphyrin desorption, diffusion and deprotection occur and at >470 K the axial chlorine is removed.