Lead and aluminum bonding in Pb-Al metaphosphate glasses

The bonding properties of cations in phosphate glasses determine many short- and medium-range structural features in the glass network, hence influencing bulk properties. In this work, Pb-Al-metaphosphate glasses (1 - x)Pb-(PO(3))(2)center dot xAI(PO(3))(3) with 0 <= - x <= 1 were analyzed to determine the effect of the substitution of Pb by Al on the glass structure in the metaphosphate composition. The glass transition temperature and density were measured as a function of the Al concentration. The vibrational and structural properties were probed by Raman spectroscopy and nuclear magnetic resonance of (31)P, (27)Al, and (207)Pb. Aluminum incorporates homogeneously in the glass creating a stiffer and less packed network. The average coordination number for Al decreases from 5.9 to 5.0 as x increases from 0.1 to 1, indicating more covalent Al-O bonds. The coordination number of Pb in these glasses is greater than 8, showing an increasing ionic behavior for compositions richer in Al. A quantitative analysis of the phosphate speciation shows definite trends in the bonding of AlO(n) groups and phosphate tetrahedra. In glasses with x < 0.48, phosphate groups share preferentially only one nonbridging O corner with an AlO(n) coordination polyhedron. For x > 0.48 more than one nonbridging O can be linked to AlO(n) polyhedra. There is no corner sharing of O between AlO(n) and PbO(n) polyhedra nor between AlO(n) themselves throughout the compositional range. The PbO(n) coordination polyhedra show considerable nonbridging O sharing, with each O participating in the coordination sphere of at least two Pb. The bonding preferences determined for Al are consistent with the behavior observed in Na-Al and Ca-Al metaphosphates, indicating this may be a general behavior for ternary phosphate glasses.

A method for Ca, Fe, Ga, Na, Si and Zn determination in alumina by inductively coupled plasma optical emission spectrometry after aluminum precipitation

In this present work a method for the determination of Ca, Fe, Ga, Na, Si and Zn in alumina (Al(2)O(3)) by inductively coupled plasma optical emission spectrometry (ICP OES) with axial viewing is presented. Preliminary studies revealed intense aluminum spectral interference over the majority of elements and reaction between aluminum and quartz to form aluminosilicate, reducing drastically the lifetime of the torch. To overcome these problems alumina samples (250 mg) were dissolved with 5 mL HCl + 1.5 mLH(2)SO(4) + 1.5 mL H(2)O in a microwave oven. After complete dissolution the volume was completed to 20 mL and aluminum was precipitated as Al(OH)(3) with NH(3) (by bubbling NH(3) into the solution up to a pH similar to 8, for 10 min). The use of internal standards (Fe/Be, Ga/Dy, Zn/In and Na/Sc) was essential to obtain precise and accurate results. The reliability of the proposed method was checked by analysis of alumina certified reference material (Alumina Reduction Grade-699, NIST). The found concentrations (0.037%w(-1) CaO, 0.013% w w(-1) Fe(2)O(3), 0.012%w w(-1)Ga(2)O(3), 0.49% w w(-1) Na(2)O, 0.014% w w(-1) SiO(2) and 0.013% w w(-1) ZnO) presented no statistical differences compared to the certified values at a 95% confidence level. (C) 2011 Elsevier B.V. All rights reserved.

Investigation of the CO tolerance mechanism at several Pt-based bimetallic anode electrocatalysts in a PEM fuel cell

The electrocatalysis of CO tolerance of Pt/C, PtRu/C, PtFe/C, PtMo/C, and PtW/C at a PEM fuel cell anode has been investigated using single cell polarization and online electrochemical mass spectrometry (EMS) measurements, and cyclic voltammetry, X-ray diffraction (XRD), in situ X-ray absorption near edge structure (XANES) analyses of the electrocatalysts. For all bimetallic electrocatalysts, which presented higher CO tolerance, EMS results have shown that the production of CO(2) start at lower hydrogen electrode overpotentials as compared to Pt/C, confirming the occurrence of the so-called bifunctional mechanism. On the other hand, XANES results indicate an increase in the Pt 5d-band vacancies for the bimetallic catalysts, particulary for PtFe/C, this leading to a weakening of the Pt-CO bond, helping to increase the CO tolerance (the so-called electronic effect). For PtMo/C and PtRu/C supplied with H(2)/CO, the formation of CO(2) is observed even when the cell is at open circuit, confirming some elimination of CO by a chemical process, most probably the water gas shift reaction. (C) 2008 Elsevier Ltd. All rights reserved.

Varmsmidning av aluminiumlegering 6026 T9 : Warm forging of aluminum alloy 6026 T9

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C – 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component’s dimensions were later measured and compared to a reference piece. To ease the flow of material a lubricant was used between the billet and the die. This was demonstrated by compressing the billet with and without any lubricant.The performed experiments show that the lubricant reduces friction and makes it easier for the material to flow into the die. Higher billet temperature than 450 °C is deemed unnecessary as it does not give any significant improvement in filling the die. The experiments also conclude that a press load of at least 280 tons is required for these conditions.

Transparent Fault Tolerance for Web Services based Architectures

Service-based architectures enable the development of new classes of Grid and distributed applications. One of the main capabilities provided by such systems is the dynamic and flexible integration of services, according to which services are allowed to be a part of more than one distributed system and simultaneously serve different applications. This increased flexibility in system composition makes it difficult to address classical distributed system issues such as fault-tolerance. While it is relatively easy to make an individual service fault-tolerant, improving fault-tolerance of services collaborating in multiple application scenarios is a challenging task. In this paper, we look at the issue of developing fault-tolerant service-based distributed systems, and propose an infrastructure to implement fault tolerance capabilities transparent to services.

Corn (Zea mays L.) cultivars tolerance to nicosulfuron

The effects of nicosulfuron on morphological, yield and growth characteristics and the histological modifications in the leaf blade were evaluated for eight corn cultivars: landrace popcorn, ESALQ-popcorn, Piranao, DSCC-Architecture, ESALQ VF7, ESALQ VD8, JAB 01F and JAB 02D. The experimental de sign was a randomized complete block with three replications in a factorial arrangement. Plots were four rows wide and 6.00m long with 0.90m spacing between rows and 0.20m between plants. Nicosulfuron was applied at the dose of 160 g a.i.ha(-1), when the plants was 25 cm high and has 5-6 expanded leaves. Nicosulfuron significantly reduced plant height at silking and the Final plant stand. There was also a significant reduction for plant height at 47 clays after sowing, for number of leaves, ear position. ear height, grain yield, ear weight and total number of ears due to nicosulfuron. The cultivars JAB 01 and JAB 02 were the least affected by the herbicide with similar yields to those of the control group, showing good tolerance to nicosulfuron. The leaves injury symptoms for all the studied cultivars consisted of chlorosis and puckering of the blades from the expanding central leaves of the plant at 7 days after application. Anatomical alterations in the epidermis due to the herbicide consisted of an increase in number and size of the bulliform cells and in the suppression of the epidermal cells in the epidermis and in the nearby of the vascular bundles. Some parenchymatic cells became voluminous and devoid of chloroplasts. SEM examination revealed a loss of bilateral symmetry of the stomata and disappearance of the subsidiary cells from the stomata near the midrib at the adaxial surface.

The Role of Phytochrome in Stress Tolerance

It is well-documented that phytochromes can control plant growth and development from germination to flowering. Additionally, these photoreceptors have been shown to modulate both biotic and abiotic stress. This has led to a series of studies exploring the molecular and biochemical basis by which phytochromes modulate stresses, such as salinity, drought, high light or herbivory. Evidence for a role of phytrochromes in plant stress tolerance is explored and reviewed.

Interação da deficiência hídrica e da toxicidade do alumínio em guandu cultivado em hidroponia

O objetivo deste trabalho foi avaliar o efeito da interação da deficiência hídrica e da toxicidade do alumínio no crescimento inicial e teores de prolina livre em duas cultivares de guandu, IAPAR 43-Aratã e IAC Fava Larga, cultivadas em hidroponia. As plântulas foram submetidas aos estresses em solução nutritiva (pH 3,8), nos potenciais osmóticos de 0, -0,004, -0,006, -0,008 e -0,010 MPa, com 0, 0,25, 0,50, 0,75 e 1 mmol dm-3 de Al3+. O experimento foi conduzido em sala de crescimento, sob luminária com irradiância média de 190 mmol m-2 s-1 , fotoperíodo de 12 horas e temperatura de 25+1ºC. O delineamento experimental foi inteiramente casualizado, em arranjo fatorial 2x5x5 (duas cultivares de guandu, cinco potenciais osmóticos e cinco níveis de alumínio), com quatro repetições. Os dados foram submetidos às análises de regressão polinomial, agrupamento e componentes principais. A deficiência hídrica causa redução do crescimento da parte aérea do guandu, e a toxicidade do alumínio provoca diminuição do crescimento radicular. Houve aumento nos teores de prolina livre nas duas cultivares sob deficiência hídrica, e apenas na IAC Fava Larga sob toxicidade de alumínio. Na análise multivariada, foi observada alta correlação no crescimento e no acúmulo de prolina na cultivar IAC Fava Larga, o que evidencia provável tolerância aos estresses associados.

Efeito simultâneo da deficiência hídrica e do alumínio tóxico no solo na cultivar IAC91-5155 de cana-de-açúcar

Sugarcane is a very important economic crop in Brazil. The effects of abiotic stresses cause negative reduction of the productivity in the sugarcane industry. In order to identify indicators of stresses tolerance, two physiological variables were evaluated, nitrate reductase activity and chlorophyll contents in young plants of sugarcane, cv. IAC91-5155. The simultaneous effect of abiotic stresses of high occurrence in Brazilian soils are, water deficiency and aluminum toxicity. The plants were submitted to three treatments of water availability (% field capacity, FC): no stress (70% FC), moderate stress (55% FC), and extreme stress (40% FC); and three acidity treatments in the soil (base saturation, V%): no acidity (V=55%), average acidity (V=33%), and high acidity (V=23%). The experiment was carried out in greenhouse, with 29.7 +/- 4.3 degrees C and 75 +/- 10% RH. The experimental design was in randomized blocks, in 3x3 factorial arrangement, with four replicates. After 60 days, nitrate reductase activity and chlorophyll contents were evaluated in the diagnostic leaf. The results demonstrate that the response of plants to a combination of drought and aluminum toxicity, similar to the conditions in many natural environments, is different from the response of plants to each of these stresses applied individually, as typically tested in the laboratory. The nitrate reductase activity can be used as a biochemical-physiological marker of water deficiency while chlorophyll contents can be used as a biochemical-physiological marker of both of them, water deficiency or aluminum toxicity in soil. Both parameters can not be as a biochemical-physiological marker for acclimation of young plants of sugarcane cv. IAC91-5155, under the combined stresses.

The intravenous glucose tolerance and postprandial glucose tests may present different responses in the evaluation of obese dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nutrição mineral de hortaliças XXVII: tolerância de cultivares de tomateiro (Lycopersicon esculentum Mill) ao alumínio e ao manganês

Dois experimentos foram conduzidas, em condições de casa-de--vegetação com o objetivo de caracterizar diferenças entre cultivares de tomateiro (Lycopersvcum esculentum Mill) com relação à tolerância ao alumínio e ao manganês. No primeiro experimento foram cultivados em Latossol Roxo (solo ácido, com níveis elevados de alumínio e manganês), seis cultivares de tomateiro: Santa Cruz Kada, Angela IAC 3946, Vital, Roma VF, Pavebo 220 e Ronita N, os três primeiros de crescimento indeterminado e os restantes de crescimento determinado. No segundo experimento, os cultivares Santa Cruz Kada e Ronita N que apresentaram um contraste de desenvolvimento no solo ácido, foram cultivados em solução nutritiva de HOAGLAND & ARNON, modificada para níveis de manganês (0,5 ; 1,5 e 3,0 ppm) e com adição de níveis de alumínio (0,0; 10,0 e 20,00 ppm). Os resultados obtidos permitiram indicar o cultivar Santa Cruz Kada como mais tolerante ao alumínio que o cultuar Ronita N. A maior sensibilidade ao alumínio do cultivar Ronita N foi associada com uma maior exigência em cálcio e fósforo, com uma maior absorção de alumínio e também com efeito depressivo do alumínio na absorção dos nutrientes mencionados, em relação ao cultivar Santa Cruz Kada. A tolerância do cultivar Santa Cruz Kada ao alumínio apesar de ser maior que a do Ronita N pode ser considerada de grau relativamente baixo, podendo-se esperar ainda, boas respostas dessas plantas à calagem nos cultivares em solos ácidos. O comportamento dos cultivares frente aos níveis de manganês em solução nutritiva foi semelhante, não sendo observado qualquer efeito prejudicial do elemento nos níveis empregados.

Reaction of Bipolaris euphorbiae to environmental factors and its tolerance to solar and ultraviolet radiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tolerance to iron chlorosis in non-grafted quince seedlings and in pear grafted onto quince plants

Grafting is a technique that may affect plant tolerance to iron chlorosis in plants cultivated for their fruit. Therefore, the objective of this study was to evaluate the tolerance of non-grafted quince seedlings and pear grafted onto quince plants cultivated in pots with alkaline soil. The experiment was conducted in a greenhouse at the University of Cordoba, Spain, in pots (3 L) filled with alkaline soil, with one plant per pot. The treatments consisted of two genotypes, quince (Cydonia oblonga Mill) semi-woody rooted cuttings, cultivar BA29, and pear (Pyrus Communis L.), cultivar Ercolini, grafted onto quince cultivar BA29 (rootstock), and two nutrient solutions with and without iron (80 mu M Fe-EDDHA) arranged in a completely random design with eight repetitions. Each pot received 250 mL of the nutrient solution on June 3rd, 2010. Chlorophyll indirect measurements and the main stem length were evaluated for six weeks after the commencement of the treatments. During the last week, the main stem dry matter weight and the leaf total iron content were determined. It was found that grafting pear seedlings onto quince rootstock resulted in a higher tolerance to iron deficiency than when quince was not grafted. Non-grafted quince plants without iron in the nutrient solution, compared to the results with its application, showed low SPAD (Soil-Plant Analyses Development) values and resulted in plants with a lower leaf iron content and lower dry matter production; however, decreased seedling stem growth was observed only in the last week of cultivation.

INHERITANCE of CUCUMBER TOLERANCE TO ZUCCHINI YELLOW MOSAIC VIRUS

Studies were carried out in Brazil to study the inheritance of tolerance to Zucchini yellow mosaic virus (ZYMV) in cucumber cv. Formosa. This cultivar was individually crossed with two cucumber lines from different varietal types (L(b) from a Brazilian type, and L(j) from a Japanese type), both susceptible to the virus. Two experiments, one for each line, were separately carried out, where 6 treatments (parents, generations F1, F2 and F1BC1 for both parents) were evaluated in a randomized block design with 5 repetitions. Cotyledons of 2-week-old cucumber seedlings were inoculated with ZYMV. Only the plants that did not show symptoms up to 63 days post inoculation were considered as tolerant. A chi-square (chi(2)) analysis for assessing segregation from F2 and both F1BC1, led to the conclusion that the tolerance found in cv. Formosa is determined by a recessive gene.

Altered plasma response to zinc and iron tolerance test after Roux-en-Y gastric bypass

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)