A Physiological Controller for Turbodynamic Ventricular Assist Devices Based on a Measurement of the Left Ventricular Volume

The current article presents a novel physiological control algorithm for ventricular assist devices (VADs), which is inspired by the preload recruitable stroke work. This controller adapts the hydraulic power output of the VAD to the end-diastolic volume of the left ventricle. We tested this controller on a hybrid mock circulation where the left ventricular volume (LVV) is known, i.e., the problem of measuring the LVV is not addressed in the current article. Experiments were conducted to compare the response of the controller with the physiological and with the pathological circulation, with and without VAD support. A sensitivity analysis was performed to analyze the influence of the controller parameters and the influence of the quality of the LVV signal on the performance of the control algorithm. The results show that the controller induces a response similar to the physiological circulation and effectively prevents over- and underpumping, i.e., ventricular suction and backflow from the aorta to the left ventricle, respectively. The same results are obtained in the case of a disturbed LVV signal. The results presented in the current article motivate the development of a robust, long-term stable sensor to measure the LVV.

Towards a Moldable Debugger

The debugger is an essential tool in any programming environment, as it helps developers understand the dynamic behaviour of software systems. However, traditional debuggers fail in answering domain-specific questions, as the semantics of what they show and do are fixed. In this paper we introduce our work towards a moldable debugger which, unlike traditional debuggers, both adapts itself and can be adapted to a particular debugging context. Thus, it allows developers to answer their questions by using concepts from their own application domains.

Continuous Flow Analysis of labile iron in ice-cores

The important active and passive role of mineral dust aerosol in the climate and the global carbon cycle over the last glacial/interglacial cycles has been recognized. However, little data on the most important aeolian dust-derived biological micronutrient, iron (Fe), has so far been available from ice-cores from Greenland or Antarctica. Furthermore, Fe deposition reconstructions derived from the palaeoproxies particulate dust and calcium differ significantly from the Fe flux data available. The ability to measure high temporal resolution Fe data in polar ice-cores is crucial for the study of the timing and magnitude of relationships between geochemical events and biological responses in the open ocean. This work adapts an existing flow injection analysis (FIA) methodology for low-level trace Fe determinations with an existing glaciochemical analysis system, continuous flow analysis (CFA) of ice-cores. Fe-induced oxidation of N,N′-dimethyl-p-pheylenediamine (DPD) is used to quantify the biologically more important and easily leachable Fe fraction released in a controlled digestion step at pH ∼1.0. The developed method was successfully applied to the determination of labile Fe in ice-core samples collected from the Antarctic Byrd ice-core and the Greenland Ice-Core Project (GRIP) ice-core.

Collaborative Conversations for Change: A SolutionFocused Approach to Family Centered Practice

The renewed interest in Family Centered Practice, prompted by the funding of Family Preservation and Support Programs, has created a need for training practitioners at a number of different levels and for a variety of roles. This paper will describe a training program for Family Centered Practice. Building on an empowerment model, the author presents an approach for working with families and children that views the tragedies of the past as resources, rather than the major cause of present problems. Collaborative Conversations for Change adapts the solution-focused therapy model to nontherapy roles that are required for a program to be family centered. Although these roles are not therapy, they are nevertheless therapeutic and reinforce clients' strengths. These collaborative conversations, however brief they may be, recognize that the client is the expert on his/her pain and struggles and the practitioner is the expert on assisting her/him plan change. Additionally, illustrations from a cross-cultural perspective demonstrate the utility of collaborative conversation in enhancing cultural competence.

Real-World Evaluation of Sensor Context-aware Adaptive Duty-cycled Opportunistic Routing

Energy is of primary concern in wireless sensor networks (WSNs). Low power transmission makes the wireless links unreliable, which leads to frequent topology changes. Resulting packet retransmissions aggravate the energy consumption. Beaconless routing approaches, such as opportunistic routing (OR) choose packet forwarders after data transmissions, and are promising to support dynamic features of WSNs. This paper proposes SCAD - Sensor Context-aware Adaptive Duty-cycled beaconless OR for WSNs. SCAD is a cross-layer routing solution and it brings the concept of beaconless OR into WSNs. SCAD selects packet forwarders based on multiple types of network contexts. To achieve a balance between performance and energy efficiency, SCAD adapts duty-cycles of sensors based on real-time traffic loads and energy drain rates. We implemented SCAD in TinyOS running on top of Tmote Sky sensor motes. Real-world evaluations show that SCAD outperforms other protocols in terms of both throughput and network lifetime.

Regulation of the Telecommunications in Switzerland: A Network Approach to Assess the Regulatory Agencies' Independence

The liberalization process of the Swiss telecommunications sector follows a logic of ‘autonomous adaptation’ to the regulations of the European Union (EU). Switzerland, which is not a Member State of the EU, voluntarily adapts to the European policy without being for- mally required to do so (Sciarini et al., 2004). This process went hand in hand with the partial privatization of the legal statute and assets of the former monopolist and with the re-regulation of the liberalized telecommunications sector.

The Moldable Debugger: A Framework for Developing Domain-Specific Debuggers

Debuggers are crucial tools for developing object-oriented software systems as they give developers direct access to the running systems. Nevertheless, traditional debuggers rely on generic mechanisms to explore and exhibit the execution stack and system state, while developers reason about and formulate domain-specific questions using concepts and abstractions from their application domains. This creates an abstraction gap between the debugging needs and the debugging support leading to an inefficient and error-prone debugging effort. To reduce this gap, we propose a framework for developing domain-specific debuggers called the Moldable Debugger. The Moldable Debugger is adapted to a domain by creating and combining domain-specific debugging operations with domain-specific debugging views, and adapts itself to a domain by selecting, at run time, appropriate debugging operations and views. We motivate the need for domain-specific debugging, identify a set of key requirements and show how our approach improves debugging by adapting the debugger to several domains.

Modeling the formation and aging of secondary organic aerosols during CalNex 2010

Four different literature parameterizations for the formation and evolution of urban secondary organic aerosol (SOA) frequently used in 3-D models are evaluated using a 0-D box model representing the Los Angeles metropolitan region during the California Research at the Nexus of Air Quality and Climate Change (CalNex) 2010 campaign. We constrain the model predictions with measurements from several platforms and compare predictions with particle- and gas-phase observations from the CalNex Pasadena ground site. That site provides a unique opportunity to study aerosol formation close to anthropogenic emission sources with limited recirculation. The model SOA that formed only from the oxidation of VOCs (V-SOA) is insufficient to explain the observed SOA concentrations, even when using SOA parameterizations with multi-generation oxidation that produce much higher yields than have been observed in chamber experiments, or when increasing yields to their upper limit estimates accounting for recently reported losses of vapors to chamber walls. The Community Multiscale Air Quality (WRF-CMAQ) model (version 5.0.1) provides excellent predictions of secondary inorganic particle species but underestimates the observed SOA mass by a factor of 25 when an older VOC-only parameterization is used, which is consistent with many previous model–measurement comparisons for pre-2007 anthropogenic SOA modules in urban areas. Including SOA from primary semi-volatile and intermediate-volatility organic compounds (P-S/IVOCs) following the parameterizations of Robinson et al. (2007), Grieshop et al. (2009), or Pye and Seinfeld (2010) improves model–measurement agreement for mass concentration. The results from the three parameterizations show large differences (e.g., a factor of 3 in SOA mass) and are not well constrained, underscoring the current uncertainties in this area. Our results strongly suggest that other precursors besides VOCs, such as P-S/IVOCs, are needed to explain the observed SOA concentrations in Pasadena. All the recent parameterizations overpredict urban SOA formation at long photochemical ages (3 days) compared to observations from multiple sites, which can lead to problems in regional and especially global modeling. However, reducing IVOC emissions by one-half in the model to better match recent IVOC measurements improves SOA predictions at these long photochemical ages. Among the explicitly modeled VOCs, the precursor compounds that contribute the greatest SOA mass are methylbenzenes. Measured polycyclic aromatic hydrocarbons (naphthalenes) contribute 0.7% of the modeled SOA mass. The amounts of SOA mass from diesel vehicles, gasoline vehicles, and cooking emissions are estimated to be 16–27, 35–61, and 19–35 %, respectively, depending on the parameterization used, which is consistent with the observed fossil fraction of urban SOA, 71(+-3) %. The relative contribution of each source is uncertain by almost a factor of 2 depending on the parameterization used. In-basin biogenic VOCs are predicted to contribute only a few percent to SOA. A regional SOA background of approximately 2.1 μgm-3 is also present due to the long-distance transport of highly aged OA, likely with a substantial contribution from regional biogenic SOA. The percentage of SOA from diesel vehicle emissions is the same, within the estimated uncertainty, as reported in previous work that analyzed the weekly cycles in OA concentrations (Bahreini et al., 2012; Hayes et al., 2013). However, the modeling work presented here suggests a strong anthropogenic source of modern carbon in SOA, due to cooking emissions, which was not accounted for in those previous studies and which is higher on weekends. Lastly, this work adapts a simple two-parameter model to predict SOA concentration and O/C from urban emissions. This model successfully predicts SOA concentration, and the optimal parameter combination is very similar to that found for Mexico City. This approach provides a computationally inexpensive method for predicting urban SOA in global and climate models. We estimate pollution SOA to account for 26 Tg yr-1 of SOA globally, or 17% of global SOA, one third of which is likely to be non-fossil.

SCAD: Sensor Context-aware Adaptive Duty-cycled Beaconless Opportunistic Routing for WSNs

Low quality of wireless links leads to perpetual transmission failures in lossy wireless environments. To mitigate this problem, opportunistic routing (OR) has been proposed to improve the throughput of wireless multihop ad-hoc networks by taking advantage of the broadcast nature of wireless channels. However, OR can not be directly applied to wireless sensor networks (WSNs) due to some intrinsic design features of WSNs. In this paper, we present a new OR solution for WSNs with suitable adaptations to their characteristics. Our protocol, called SCAD-Sensor Context-aware Adaptive Duty-cycled beaconless opportunistic routing protocol is a cross-layer routing approach and it selects packet forwarders based on multiple sensor context information. To reach a balance between performance and energy-efficiency, SCAD adapts the duty-cycles of sensors according to real-time traffic loads and energy drain rates. We compare SCAD against other protocols through extensive simulations. Evaluation results show that SCAD outperforms other protocols in highly dynamic scenarios.

European Public Sphere

Political communication scholars have investigated whether a public sphere emerges that adapts to the new supra- and intergovernmental European reality in the course of European Union integration. Such European public sphere(s) might link EU politics to citizens. The entry discusses not only how such Europeanized public sphere might affect the quality of democracy as well as the political process but also what a European public sphere could look like and how we might measure it. Our empirical knowledge on the existence or nonexistence of a European Public Sphere is summarized in five theses. The article concludes with future paths for research.

A unified approach to architecture conformance checking

Architectural decisions can be interpreted as structural and behavioral constraints that must be enforced in order to guarantee overarching qualities in a system. Enforcing those constraints in a fully automated way is often challenging and not well supported by current tools. Current approaches for checking architecture conformance either lack in usability or offer poor options for adaptation. To overcome this problem we analyze the current state of practice and propose an approach based on an extensible, declarative and empirically-grounded specification language. This solution aims at reducing the overall cost of setting up and maintaining an architectural conformance monitoring environment by decoupling the conceptual representation of a user-defined rule from its technical specification prescribed by the underlying analysis tools. By using a declarative language, we are able to write tool-agnostic rules that are simple enough to be understood by untrained stakeholders and, at the same time, can be can be automatically processed by a conformance checking validator. Besides addressing the issue of cost, we also investigate opportunities for increasing the value of conformance checking results by assisting the user towards the full alignment of the implementation with respect to its architecture. In particular, we show the benefits of providing actionable results by introducing a technique which automatically selects the optimal repairing solutions by means of simulation and profit-based quantification. We perform various case studies to show how our approach can be successfully adopted to support truly diverse industrial projects. We also investigate the dynamics involved in choosing and adopting a new automated conformance checking solution within an industrial context. Our approach reduces the cost of conformance checking by avoiding the need for an explicit management of the involved validation tools. The user can define rules using a convenient high-level DSL which automatically adapts to emerging analysis requirements. Increased usability and modular customization ensure lower costs and a shorter feedback loop.

ADAPTATION OF INTESTINAL MUSCLE IN THE RAT AFTER INTESTINAL BYPASS

After intestinal bypass, the mucosa of the in-continuity segment (ICS) of intestine undergoes adaptive hyperplasia which results in increased absorptive function per length of intestine. In the present study, 70% of the small intestine was bypassed in rats to determine if intestinal muscle also adapts after bypass. To determine the effect of bypass on intestinal transit, a poorly absorbed marker substance was introduced into the orad portion of the ICS or bypassed loop (BL). Significantly less marker (P < 0.05) was passed from the ICS into the colon in 50 minutes in fed rats at 14 days compared to at 3 days after bypass. In 150 minutes there was more marker in the colon of fed rats at 3 and 14 days but not at 35 days after bypass than in control. In the BL, transit was slowed significantly in fed rats at 3 and 35 days and in fasted rats at 3 days but not 35 days after bypass compared to control. The circular muscle from the BL and the distal but not proximal portion of the ICS developed significantly more carbachol-stimulated force in vitro at 35 but not 3 days after bypass compared to unoperated but not sham-operated controls. At 35 days after bypass, the muscle layers had a greater muscle wet weight and protein content compared to both unoperated and sham-operated control in both the proximal and distal portions of the ICS. Similarly, there was more muscle in histological sections of the BL and distal portion of the ICS at 35 days after bypass compared to either control. Nonetheless, at 35 days after bypass actomyosin content as a fraction of muscle weight or total protein content was not different from control. The results support the hypothesis that there was a functional adaptation, i.e. slowed transit in fed rats that allowed more time for absorption. Feeding caused slowed transit in the BL as well as the ICS. Other results suggest that an increased amount of functional muscle formed in the distal portion of the ICS after bypass. ^

Deterrence and Incapacitation: Towards a Unified Theory of Criminal Punishment

Economic models of crime have focused primarily on the goal of deterrence; the goal of incapacitation has received much less attention. This paper adapts the standard deterrence model to incorporate incapacitation. When prison only is used, incapacitation can result in a longer or a shorter optimal prison term compared to the deterrence-only model. It is longer if there is underdeterrence, and shorter if there is overdeterrence. In contrast, when a fine is available and it is not constrained by the offender's wealth, the optimal prison term is zero. Since the fine achieves first-best deterrence, only efficient crimes are committed and hence, there is no gain from incapacitation.

La funcionalidad de la anatomía en el Profesorado en Educación Física

Históricamente, la enseñanza de la anatomía dentro del ámbito de la Educación Física no ha focalizado sus contenidos en la práctica misma de esta carrera, no ha estado contextualizada en sus problemáticas; por lo tanto, intentaremos demostrar que la temática que planteamos puede responder a las necesidades de una Educación Física dinámica. Para ello, es de vital importancia resaltar el aporte funcional que se adapta de una forma más real a nuestra práctica docente. La anatomía funcional que se propone trasciende la descripción estática de las diferentes regiones del cuerpo humano, teniendo una visión más amplia de dicho cuerpo en movimiento. A partir de esta idea, se trata de ver a los contenidos de la asignatura no como rígidos o invariables sino utilizándolos para reflexionar y crear espacios de discusión sobre nuestra práctica y preguntarnos qué nos aporta una anatomía reducida solo a sus contenidos descriptivos. La anatomía, en este aspecto, debe partir del propio campo y es aquí donde surgen nuestras inquietudes en torno a enfocarla desde sus funciones, partiendo del movimiento y no desde el preparado cadavérico donde se observa la carencia de una dinámica real para nuestro campo

La funcionalidad de la anatomía en el Profesorado en Educación Física

Históricamente, la enseñanza de la anatomía dentro del ámbito de la Educación Física no ha focalizado sus contenidos en la práctica misma de esta carrera, no ha estado contextualizada en sus problemáticas; por lo tanto, intentaremos demostrar que la temática que planteamos puede responder a las necesidades de una Educación Física dinámica. Para ello, es de vital importancia resaltar el aporte funcional que se adapta de una forma más real a nuestra práctica docente. La anatomía funcional que se propone trasciende la descripción estática de las diferentes regiones del cuerpo humano, teniendo una visión más amplia de dicho cuerpo en movimiento. A partir de esta idea, se trata de ver a los contenidos de la asignatura no como rígidos o invariables sino utilizándolos para reflexionar y crear espacios de discusión sobre nuestra práctica y preguntarnos qué nos aporta una anatomía reducida solo a sus contenidos descriptivos. La anatomía, en este aspecto, debe partir del propio campo y es aquí donde surgen nuestras inquietudes en torno a enfocarla desde sus funciones, partiendo del movimiento y no desde el preparado cadavérico donde se observa la carencia de una dinámica real para nuestro campo