Compostos orgânicos voláteis na defesa induzida das plantas contra insetos herbívoros

The identification and manipulation of chemical compounds involved in vital activities of arthropods have the potential for developing less aggressive pest control strategies. Herbivory induces the emission of volatile organic compounds involved in the recruitment of natural enemies, plant-plant interactions and repellency of other herbivores. In this report, we review the main chemical groups of volatile organic compounds and their ecological functions, provide an overview of the signal transduction pathways activated upon herbivory, and review the current state of knowledge for practical applications in pest management. We conclude by proposing perspectives for future research.

A Química na agricultura: perspectivas para o desenvolvimento de tecnologias sustentáveis

Food production and preservation of the environment are among the challenges faced by contemporary society. In Brazil, as in most parts of the world, the possibility of increasing the agricultural area is limited by several factors. Thus, an increase in productivity through the application of innovative technologies is regarded as the best solution to overcome such a problem. For long, chemistry has contributed to agricultural innovations such as synthetic pesticides for pest management. However, due to the well-known adverse effects of these compounds, new "greener" strategies are being explored. Research in chemical ecology, in combination with other emerging sciences, is leading to the development of new technologies such as plant-based pesticides (biopesticides); synthetic pheromones and plant volatile organic compounds, both of them to manipulate insect behavior; chemical elicitors to boost plant resistance; and genetic engineering of plant varieties. In these, chemistry plays an important role in the identification and synthesis of functional compounds. These techniques may be incorporated in integrated pest management programs and may contribute to a sustainable agriculture in the future.

Biomolecules produced in liquid-state fermentation by a marine-derived fungus, Penicillium roqueforti

Screening of biomass of a new marine-derived strain of Penicillium roqueforti, as produced by liquid-state fermentation, led to the identification of several volatile organic compounds active in the fatty acid pathway as well as fragments produced by their catabolism, terpenoids, and metabolites from the shikimic acid pathway. In addition, five non-volatile organic compounds, triolein, ergosterol peroxide, 9(11)-dehydroergosterol peroxide, 4-hydroxybenzaldehyde, and d-mannitol, were isolated and identified by spectroscopy. The results showed that this fungal strain did not produce any mycotoxin in the culture conditions applied, and thus is useful for industrial applications, where high value-added biomolecules are generated.

CONSTRUÇÃO DE UM REATOR DE PLASMA DESCARGA CORONA PARA ELIMINAÇÃO DE COMPOSTOS ORGÂNICOS VOLÁTEIS

The impacts derived from the emission of volatile organic compounds (VOC) into the atmosphere can have harmful consequences for human health and the environment. In this regard, the present paper proposes the construction of a low-cost cold plasma reactor for the treatment of these compounds. Tests with the prototype were performed to confirm the efficiency for BTEX (benzene, toluene and xylene) samples. Degradation efficiency was confirmed by the gas chromatography method.

Porvoon jalostamon haihtuvien orgaanisten yhdisteiden päästömääritysmenetelmät

Työssä käytiin läpi Porvoon jalostamon haihtuvien orgaanisten yhdisteiden päästömääritysmenetelmiä ja arvioitiin nykyisin käytössä olevien sekä uusien menetelmien soveltuvuutta Porvoon jalostamon päästömääritykseen. Nykyisten menetelmien arviointia tehtiin käymällä läpi eri alueiden 2000-luvun päästömäärät sekä vertaamalla päästömääriä muiden jalostamojen vastaaviin päästömääriin. Haihtuvista orgaanisista yhdisteistä puhuttaessa jätetään yleisesti metaani määritelmän ulkopuolelle ja käytetään termiä NMVOC-yhdisteet. Työssä laskettiin arvio Porvoon jalostamon metaanin päästömäärälle ja arvioitiin sen vaikutusta NMVOC-kokonaispäästömäärään. Metaanin kokonaispäästömäärien havaittiin olevan noin kymmenen kertaa haihtuvien orgaanisten yhdisteiden päästömääriä pienempiä, ja näin ollen niiden lisäämisellä NMVOC-päästöihin ei ole juuri vaikutusta. Myös menetelmien investointi- ja käyttökustannuksia, sekä pidemmän aikavälin kustannuksia arvioitiin. Kustannuksiltaan tällä hetkellä Porvoon jalostamolla käytössä olevat menetelmät ovat kustannustehokkaita. Uusista menetelmistä DIAL, SOF ja OGI ovat kustannuksiltaan huomattavasti kalliimpia, myös pitkän aikavälin vertailulla. Nykyisten menetelmien vuosittaiset kustannukset aiheutuvat mittausten vaatimista henkilötyötunneista. Uusista menetelmistä SOF ja DIAL vaativat ulkopuolisten mittaajien käyttämistä. Massavirran määrityksen suhteen vielä kehitysvaiheessa olevalla OGI-kameralla mitatessa voidaan käyttää mittaajina omaa henkilökuntaa. Toisin kuin DIAL- ja SOF-menetelmien laitteistot, OGI-kamera ostetaan omaksi ja näin ollen sitä voidaan käyttää tarpeen vaatiessa vuoden ympäri esimerkiksi suurien vuotajien paikallistamiseen ja LDAR-kiristysohjelman tukena. Tarkastelun perusteella olisi suositeltavaa tarkastaa nykyisin käytettävistä laskentamenetelmistä erityisesti prosessi- ja säiliöalueen sekä jätevesijärjestelmä päästömäärät käyttäen tarkempia DIAL-, SOF- tai myöhemmin OGI-menetelmiä ja muokata laskentamenetelmiä vastamaan näillä määritettyjä päästömääriä.

Käytetyn voiteluöljyn regenerointilaitoksen prosessivesien karakterisointi

Käytetyn voiteluöljyn regeneroinnissa muodostuu prosessivettä useista lähteistä. Tehokas päästöjenhallinta on yksi tärkeimmistä tavoitteista regenerointilaitoksen operoinnissa ja sen takia sitä tulee kehittää jatkuvasti entistä paremmaksi. Tavoitteisiin pääsemiseksi on oleellista tunnistaa vesienkäsittelyprosessin laadullinen massatase ja laadunvaihtelut ajotilanteiden mukaan. Työssä tutkitaan ja analysoidaan veden sisältämiä epäpuhtauksia sekä kirjallisuuslähteiden perusteella, että standardimenetelmillä ja modifioiduilla menetelmillä, joilla on akkreditointi. Analyysituloksista muodostetaan laadullinen massatase, josta nähdään epäpuhtauksien ja niitä kuvaavien parametrien kuormitukset kussakin prosessivesivirrassa. Tulosten perusteella arvioidaan nykyisen vesienkäsittelyn tehokkuutta, sen säätömahdollisuuksia ja kehitystarvetta. Tarkastelun ulkopuolelle kuitenkin jätetään vesienkäsittelystä ulosjohdettavan prosessiveden puhdistuslaitos. Tutkimusten perusteella regenerointilaitoksessa muodostuvien prosessivesien epäpuhtaudet koostuvat öljystä, BTEX-yhdisteistä, fenoliyhdisteistä, liuottimista, polttoaineiden ja voiteluöljyjen lisäaineista, typpi- ja rikkiyhdisteistä, metalliyhdisteistä sekä kiintoaineesta. Öljy jakautuu kevyisiin (C5-C10), keskiraskaisiin (C10-21) ja raskaisiin (C21-40) jakeisiin. Vesienkäsittelyssä suurin osa öljystä ja epäpuhtauksista saadaan erottumaan vedestä, jolloin puhdistuslaitokselle päätyy jäämäpitoisuudet öljyä, haihtuvia yhdisteitä sekä muita epäpuhtauksia. Puhdistuslaitosta kuormittavat eniten liuenneet orgaaniset yhdisteet sekä korkeaa kemiallista hapenkulutusta aiheuttavat epäorgaaniset yhdisteet (suolat), joiden erottamista prosessivesistä on syytä tulevaisuudessa kehittää.

Towards novel biogas upgrading processes

Biogas production has considerable development possibilities not only in Finland but all over the world since it is the easiest way of creating value out of various waste fractions and represents an alternative source of renewable energy. Development of efficient biogas upgrading technology has become an important issue since it improves the quality of biogas and for example facilitating its injection into the natural gas pipelines. Moreover, such upgrading contributes to resolving the issue of increasing CO2 emissions and addresses the increasing climate change concerns. Together with traditional CO2 capturing technologies a new class of recently emerged sorbents such as ionic liquids is claimed as promising media for gas separations. In this thesis, an extensive comparison of the performance of different solvents in terms of CO2 capture has been performed. The focus of the present study was on aqueous amine solutions and their mixtures, traditional ionic liquids, ‘switchable’ ionic liquids and poly(ionic liquid)s in order to reveal the best option for biogas upgrading. The CO2 capturing efficiency for the most promising solvents achieved values around 50 - 60 L CO2 / L absorbent. These values are superior to currently widely applied water wash biogas upgrading system. Regeneration of the solvent mixtures appeared to be challenging since the loss of initial efficiency upon CO2 release was in excess of 20 - 40 vol %, especially in the case of aqueous amine solutions. In contrast, some of the ionic liquids displayed reversible behavior. Thus, for selected “switchable” ionic and poly(ionic liquid)s the CO2 absorption/regeneration cycles were performed 3 - 4 times without any notable efficiency decrease. The viscosity issue, typical for ionic liquids upon CO2 saturation, was addressed and the information obtained was evaluated and related to the ionic interactions. The occurrence of volatile organic compounds (VOCs) before and after biogas upgrading was studied for biogas produced through anaerobic digestion of waste waters sludge. The ionic liquid [C4mim][OAc] demonstrated its feasibility as a promising scrubbing media and exhibited high efficiency in terms of the removal of VOCs. Upon application of this ionic liquid, the amount of identified VOCs was diminished by around 65 wt %, while the samples treated with the aqueous mixture of 15 wt % N-methyldiethanolamine with addition of 5 wt % piperazine resulted in 32 wt % reduction in the amounts of volatile organic compounds only.

Täytekappalekolonnin likaantumisen syyt ja likaantumisen vähentämisen menetelmiä

Lateksinvalmistusprosessin aikana syntyvää jätevettä käsitellään täytekappalekolonnissa siinä olevien haihtuvien orgaanisten yhdisteiden poistamiseksi. Käsittelyprosessin aikana jätevedessä oleva kiintoaine kiinnittyy täytekappaleiden pinnalle, lopulta tukkien ne. Täytekappaleiden vaihtotyö sekä likaantuneiden täytekappaleiden pesu aiheuttavat kustannuksia. Lainsäädäntö ja sopimus kunnallisen jäteveden käsittelyn kanssa vaativat, että haihtuvien yhdisteiden päästöt lasketaan tietyn tason alapuolelle. Työn ensimmäisenä tavoitteena oli tutkia lateksitehtaan jätevesivirtojen koostumusta massa- ja ainetaseiden avulla, erityisesti täytekappalekolonnia likaavan aineen osalta. Toisena tavoitteena oli löytää menetelmiä pidentää täytekappalekolonnin ajojaksoa nykyisestä. Kolmantena tavoitteena oli löytää tai kehittää esikäsittelymenetelmä likaavan aineen poistamiseksi ennen täytekappalekolonnia. Viimeisenä tavoitteena oli optimoida prosessin ajotapa, josta saavutettaisiin säästöjä vähentyneenä energiankulutuksena. Tutkimuksen perusteella täytekappalekolonni poistaa syntyvästä jätevedestä haihtuvia orgaanisia yhdisteitä 100 prosenttia sekä kemiallista hapenkulutusta 99,5 prosenttia. Täytekappalekolonnin ajojaksoa voidaan pidentää ennakoimalla kolonnin ylä- ja alapään paine-eron perusteella sen likaantumisastetta ja täytekappaleiden vaihtotarvetta. Tutkimuksen perusteella soveltuvia jäteveden esikäsittelymenetelmiä ovat dekantointi, jossa kuuden tunnin viipymällä poistetaan kiintoainetta sekä hallittu kiintoaineen saostus, jossa kymmenen minuutin viipymällä poistetaan sekä haihtuvia orgaanisia yhdisteitä, että kiintoainetta. Energiankulutusta voidaan optimoida vähentämällä höyryn virtausta täytekappalekolonniin erotustehokkuuden siitä kärsimättä.

Pulsed corona discharge as an advanced oxidation process for degradation of organic

Advanced oxidation processes (AOPs) have been studied and developed to suffice the effective removal of refractory and toxic compounds in polluted water. The quality and cost of wastewater treatment need improvements, and electric discharge technology has a potential to make a significant difference compared to other established AOPs based on energy efficiency. The generation of active oxidant species such as ozone and hydroxyl radicals by high voltage discharge is a relatively new technology for water treatment. Gas-phase pulsed corona discharge (PCD), where a treated aqueous solution is dispersed between corona-producing electrodes free of the dielectric barriers, was developed as an alternative approach to the problem. The short living radicals and ozone formed in the gas phase and at the gas-liquid interface react with dissolved impurities. PCD equipment has a relatively simple configuration, and with the reactor in an enclosed compartment, it is insensitive towards gas humidity and does not need the gas transport. In this thesis, PCD was used to study and evaluate the energy efficiency for degrading various organic compounds, as well as the chemistry of the oxidation products formed. The experiments investigate the aqueous oxidation of phenol, humic substances, pharmaceutical compounds (paracetamol, ibuprofen, indomethacin, salicylic acids, -estradiol), as well as lignin degradation and transformation to aldehydes. The study aims to establish the influence of initial concentration of the target pollutant, the pulsed discharge parameters, gas phase composition and the pH on the oxidation kinetics and the efficiency. Analytical methods to measure the concentrations of the target compounds and their by-products include HPLC, spectrophotometry, TOC and capillary electrophoresis. The results of the research included in this summary are presented in the attached publications and manuscripts accepted for publication. Pulsed corona discharge proved to be highly effective in oxidizing each of the target compounds, surpassing the closest competitor, conventional ozonation. The increase in oxidation efficiencies for some compounds in oxygen media and at lower pulse repetition frequencies shows a significant role of ozone. The role of the ·OH radicals was established in the surface reactions. The main oxidation products, formation of nitrates, and the lignin transformation were quantified. A compound specific approach is suggested for optimization of the PCD parameters that have the most significant impact on the oxidation energy efficiency because of the different characteristics and responses of the target compound to the oxidants, as well as different admixtures that are present in the wastewater. Further studies in the method’s safety (nitration and nitrosation of organic compounds, nitrite and nitrate formation enhancement) are needed for promoting the method.

Emissão por folhas de Ficus benjamina L. (Moraceae) de compostos orgânicos voláteis oxigenados

A vegetação é a fonte de aproximadamente 90% de todos os compostos orgânicos voláteis na atmosfera global. Alguns hidrocarbonetos oxigenados emitidos por plantas reagem com radicais livres, tais como nitrato e hidroxila, e ozônio em taxas comparáveis com aquelas dos compostos antropogênicos mais reativos e podem contribuir para a formação de ozônio em áreas urbanas. Apesar do papel importante dos hidrocarbonetos naturais na formação fotoquímica dos oxidantes, pouco se sabe sobre as espécies químicas dos compostos orgânicos voláteis emitidos por plantas. Nesse trabalho, foi estudada a emissão de compostos orgânicos voláteis por Ficus benjamina, espécie comumente encontrada na região da cidade de São Paulo. Os gases emitidos pelas folhas da F. benjamina foram coletados em sistemas fechados e vários compostos orgânicos voláteis oxigenados, tais como ácidos orgânicos (ácido fórmico e ácido acético), aldeídos (formaldeído, acetaldeído e hexanal) e álcoois (mentol, 1- butanol, 1-pentanol, 2-penten-1-ol, 4-penten-2-ol e linalool), foram identificados através de técnicas cromatográficas.

Ultrasonic and Electrokinetic Remediation of Low Permeability Soil Contaminated with Persistent Organic Pollutants

Electrokinetics has emerged as a potential technique for in situ soil remediation and especially unique because of the ability to work in low permeability soil. In electrokinetic remediation, non-polar contaminants like most organic compounds are transported primarily by electroosmosis, thus the process is effective only if the contaminants are soluble in pore fluid. Therefore, enhancement is needed to improve mobility of these hydrophobic compounds, which tend to adsorb strongly to the soil. On the other hand, as a novel and rapidly growing science, the applications of ultrasound in environmental technology hold a promising future. Compared to conventional methods, ultrasonication can bring several benefits such as environmental friendliness (no toxic chemical are used or produced), low cost, and compact instrumentation. It also can be applied onsite. Ultrasonic energy applied into contaminated soils can increase desorption and mobilization of contaminants and porosity and permeability of soil through developing of cavitation. The research investigated the coupling effect of the combination of these two techniques, electrokinetics and ultrasonication, in persistent organic pollutant removal from contaminated low permeability clayey soil (with kaolin as a model medium). The preliminary study checked feasibility of ultrasonic treatment of kaolin highly contaminated by persistent organic pollutants (POPs). The laboratory experiments were conducted in various conditions (moisture, frequency, power, duration time, initial concentration) to examine the effects of these parameters on the treatment process. Experimental results showed that ultrasonication has a potential to remove POPs, although the removal efficiencies were not high with short duration time. The study also suggested intermittent ultrasonication over longer time as an effective means to increase the removal efficiencies. Then, experiments were conducted to compare the performances among electrokinetic process alone and electrokinetic processes combined with surfactant addition and mainly with ultrasonication, in designed cylinders (with filtercloth separating central part and electrolyte parts) and in open pans. Combined electrokinetic and ultrasonic treatment did prove positive coupling effect compared to each single process alone, though the level of enhancement is not very significant. The assistance of ultrasound in electrokinetic remediation can help reduce POPs from clayey soil by improving the mobility of hydrophobic organic compounds and degrading these contaminants through pyrolysis and oxidation. Ultrasonication also sustains higher current and increases electroosmotic flow. Initial contaminant concentration is an essential input parameter that can affect the removal effectiveness.

Synthesis of isotope-labelled methoxypyrazine compounds as internal standards and quantitative determination of aroma methoxypyrazines in water and wines by solid-phase extraction with isotope dilution-GC-MS /

An efficient way of synthesizing the deuterium labelled analogues of three methoxypyrazine compounds: 2-d3-methoxy-3-isopropylpyrazine, 2-d3-methoxy-3- isobutylpyrazine, and 2-d3-methoxy-3-secbutylpyrazine, has been developed. To confirm that the deuterium labels had been incorporated into the expected positions in the molecules synthesized, the relevant characterization by NMR, HRMS and GC/MS analysis was conducted. Another part of this work involved quantitative determination of methoxypyrazines in water and wines. Solid-phase extraction (SPE) proved to be a suitable means for the sample separation and concentration prior to GC/MS analysis.Such factors as the presence of ethanol, salt, and acid have been investigated which can influence the recovery by SPE for the pyrazines from the water matrix. Significantly, in this work comparatively simple fractional distillation was attempted to replace the conventional steam distillation for pre-concentrating a sample with a relatively large volume prior to SPE. Finally, a real wine sample spiked with the relevant isotope-labelled methoxypyrazines was quantitatively analyzed, revealing that the wine with 10 beetles per litre contained 138 ppt of 2-methoxy-3-isopropylpyrazine. Interestingly, we have also found that 2-methoxy-3-secbutylpyrazine exhibits an extremely low detection limit in GC/MS analysis compared with the detection limit of the other two methoxypyrazines: 2- methoxy-3-isopropylpyrazine and 2-methoxy-3-isobutylpyrazine.

Strong hydrogen bonding in organic synthesis

The preparation of phenacyl and para-phenylphenacyl esters, the reactions of carboxylic acids, phenols, 2-nitropropane and alcohols with alkyl halides in the presence of fluoride anion are described. The reactions are thought to be accelerated by the formation of hydrogen bonds between the fluoride anion and the organic electron acceptor. The fluoride ,carboxylic acids, fluoride-phenols and fluoride-2-nitropropane are better reaction systems than the fluoride-alcohol. The source of the fluoride anion and the choice of solvents are also discussed.

Kinetic and product studies for the oxidtion of organic sulfides and sulfoxides in the presence of transition metal complexes

Rates and products of the oxidation of diphenyl sulfide, phenyl methyl sulfide, p-chlorophenyl methyl sulfide and diphenyl sulfoxide have been determined. Oxidants included t-Bu02H alone, t-Bu02H plus molybdenum or vanadium catalysts and the molybdenum peroxo complex Mo0(02)2*HMPT. Reactions were chiefly carried out in ethanol at temperatures ranging from 20° to 65°C. Oxidation of diphenyl sulfide by t-Bu02H in absolute ethanol at 65°C followed second-order kinetics with k2 = 5.61 x 10 G M~1s"1, and yielded only diphenyl sulfoxide. The Mo(C0)g-catalyzed reaction gave both the sulfoxide and the sulfone with consecutive third-order kinetics. Rate = k3[Mo][t-Bu02H][Ph2S] + k^[Mo][t-Bu02H][Ph2S0], where log k3 = 12.62 - 18500/RT, and log k^ = 10.73 - 17400/RT. In the absence of diphenyl sulfide, diphenyl sulfoxide did not react with t-Bu02H plus molybdenum catalysts, but was oxidized by t-Bu02H-V0(acac)2. The uncatalyzed oxidation of phenyl methyl sulfide by t-Bu02H in absolute ethanol at 65°C gave a second-order rate constant, k = 3.48 x 10~"5 M^s""1. With added Mo(C0)g, the product was mainly phenyl methyl sulfoxide; Rate = k3[Mo][t-Bu02H][PhSCH3] where log k3 = 22.0 - 44500/RT. Both diphenyl sulfide and diphenyl sulfoxide react readily with the molybdenum peroxy complex, Mo0(02)2'HMPT in absolute ethanol at 35°C, yielding diphenyl sulfone. The observed features are mainly in agreement with the literature on metal ion-catalyzed oxidations of organic compounds by hydroperoxides. These indicate the formation of an active catalyst and the complexation of t-Bu02H with the catalyst. However, the relatively large difference between the activation energies for diphenyl sulfide and phenyl methyl sulfide, and the non-reactivity of diphenyl sulfoxide suggest the involvement of sulfide in the production of an active species.

Reactions of steroidal epoxides with strong organic bases and an investigation into the syntheses of some labelled pregnane derivatives

Reactions of 5,6- and 4,5-epoxycholestane derivatives with strong bases were investigated. Epoxidation of 3a-acetoxycholest-5-ene also gave a new compound along with the anticipated epoxides. Interconversions of the latter were observed. Some possible mechanisms of its formation and rearrangements have been pIioposed. No reaction was observed with any of the 5,6- and 4,5-steroidal epoxides employed in the present study, using potassium tertiary butoxide under refluxing conditions. n-Butyllithium reacted only with 5,6-epoxycholestanes bearing a ketal moiety at the C3 carbon. Opening of the ketal group was observed with n-butyllithium in the case of a ~-epoxide. The reaction was also investigated in the absence of epoxide functionality. A possible mechanism for the opening of ketal group has been proposed. Lithium diethylamide (LDEA) was found effective in rearranging 5,6- and 4,5-epoxides to their ~orresponding allylic alcohols. These rearrangements presumably proceed via syn-eliminations, however the possibility of a corresponding anti-elimination has not been eliminated. A substituent effect of various functional groups (R = H, OH, OCH2CH20) at C3 has-been observed on product distribution in the LDEApromoted rearrangements of the corresponding epoxides. No reaction of these epoxides was observed with lithium diisopropylamide (LDA) • In the second part of the project, several attempts were made towards the sYRthesis of deoxycorticoste~one~17,2l,2l~d3' a compound desirable for the 2l-dehydroxylation studies of deoxycorticosterone. Several routes were investigated, and some deuterium labelled pregnane derivatives were prepared in this regard. Microbial 21-hydroxylation of progesteronel7,21,21,2l- d4 by ~ niger led to loss of deuterium from C21 of the product. An effort was made to hydroxylate progesterone microbially under neutral condtions.