Statistical Simulation of Rarefied Gas Flows in Micro-Channels

Rarefied gas flows through micro-channels are simulated using particle approaches, named as the information preservation (IP) method and the direct simulation Monte Carlo (DSMC) method. In simulating the low speed flows in long micro-channels the DSMC method encounters the problem of large sample size demand and the difficulty of regulating boundary conditions at the inlet and outlet. Some important computational issues in the calculation of long micro-channel flows by using the IP method, such as the use the conservative form of the mass conservation equation to guarantee the adjustment of the inlet and outlet boundary conditions and the super-relaxation scheme to accelerate the convergence process, are addressed. Stream-wise pressure distributions and mass fluxes through micro-channels given by the IP method agree well with experimental data measured in long micro-channels by Pong et al. (with a height to length ratio of 1.2:3000), Shih et al. (l.2:4800), Arkilic et al. and Arkilic (l.3:7500), respectively. The famous Knudsen minimum of normalized mass flux is observed in IP and DSMC calculations of a short micro-channel over the entire flow regime from continuum to free molecular, whereas the slip Navier-Stokes solution fails to predict it.

Depresión y calcificación en la raíz aórtica y arterias coronarias

Resumen: Se estudia, en adultos de ambos sexos, la asociación entre la depresión y la presencia simultánea de calcificación en las arterias coronarias y la raíz aórtica por un lado, y entre la depresión y la presencia de calcificación coronaria, por otro lado. Estudio transversal. Participaron mayores de 21 años, asintomáticos, sin antecedentes coronarios, que se realizaron una angiotomografía cardíaca por indicación del médico tratante y que fueron evaluados para la depresión. La presencia de calcificación se evaluó mediante angiotomografía cardíaca. La depresión se evaluó mediante un test psicológico. Resultados: 60 adultos, 30 hombres y 30 mujeres, media de 51 ± 5 años. Encontramos una asociación de mayor fortaleza entre la depresión y la calcificación en dos ubicaciones (calcificación coronaria y aórtica) que en un solo lugar (calcificación coronaria). Las personas con calcificación coronaria y aórtica puntuaron más alto en las pruebas de depresión que las personas con calcificación coronaria únicamente. El presente estudio tiene limitaciones debido al tamaño de la muestra y el diseño utilizado. Sin embargo, los resultados sugieren que podría ser interesante estudiar una muestra más grande, con un diseño prospectivo, teniendo en cuenta otras variables intervinientes. Los resultados del presente trabajo confirmaron la presencia simultánea de la depresión y las lesiones ateroscleróticas. Se sugieren dos preguntas: si el tratamiento de la depresión podría modificar el proceso de evolución de las lesiones, y viceversa, y si una intervención terapéutica en ambos (enfermedad aterosclerótica y la depresión), sería más acertada que sólo realizar el tratamiento de la enfermedad aterosclerótica.

Statistical Simulation of Thin-Film Bearings

The information preservation (IP) method and the direct simulation Monte Carlo (DSMC) method are used to simulate the gas flows between the write/read head and the platter of the disk drive (the slider bearing problem). The results of both methods are in good agreement with numerical solution of the Reynolds equation in the cases studied. However, the DSMC method owing to the problem of large sample size demand and the difficulty in regulating boundary conditions at the inlet and outlet was able to simulate only short bearings, while IP simulates the bearing of authentic length ~1000 m ? and can provide more detailed flow information.

Mussel Community Studies [Year One].

Mytilus californianus communities (mussel beds) were examined from six geographic localities in Southern California. These included two mainland sites, Coal Oil Point and San Diego; and four island sites, San Miguel, Santa Cruz, San Nicholas, and Santa Barbara Islands. Optimal sample sizes were determined for each locality. In general, a sample, size of 1500 cm2 (five cores) was optimal for the "typical" mussel bed. However, structurally unique mussel beds required individual consideration. Community biomass, diversity, species richness, and species evenness were calculated quarterly for the island localities and biannually for mainland locations. The molluscs, primarily the mussels, accounted for 90% of the total biomass while all other groups combined accounted for 10% or less of the total biomass. The mussel communities from all localities contributed to the master species list which conservatively contained 346 species. The most diverse localities were Coal Oil Point and Santa Cruz Island with an average number of 73 and 74 species/O.lS m respectively. No overall seasonal patterns existed in community composition. The community similarity analyses showed the mainland localities biotically dissimilar from the islands and both groups were characterized by distinct faunal assemblages. In addition, San Miguel Island biota were unique among the island sites. The most important mussel bed structural attributes provided habitats for the associated community and included sediment and coarse fraction features. Food-related resources provided by the mussel bed were secondarily important. Community diversity generally increased with the quantity of habitat and food resources. (PDF contains 138 pages)

Mussel Community Studies [Year Two].

The communities associated with Mytilus californianus (mussel) beds from eleven geographic localities in Southern California were examined. The localities included four mainland sites - Government Point, Goleta Point, Corona del Mar and San Diego; and seven offshore islands including - San Miguel Island, Santa Rosa Island, Santa Cruz Island, Santa Barbara Island, Santa Catalina Island, San Nicholas Island and San Clemente Island. This geographic coverage. was much more complete than the previous year (1975-1976 program). However, it is still less than ideal. In particular a single island collection locality may not be representative of an entire island. Therefore greater geographic coverage of the islands is recommended for the future. In general, the 1500 cm2 sample size adopted during the 1975-1976 program proved adequate for sampling most of the structurally diverse mussel beds this year. This sample size supplied information on the characteristic and abundant species inhabiting a particular mussel bed, and provided data which was well suited to intersite community comparisons. This sample size was too small in several instances to include the rarer, less abundant species. The mussel communities from all localities contributed to the master species list which contained conservatively 481 species of animals and 63 specie s of algae. The most diverse collections came from Santa Cruz Island and Corona del Mar, and these areas contained 120 and 119 species respectively. The lowest diversity was recorded for the mussel beds from Goleta Point: which contained 57 species. Mussel community samples were collected from upper and lower intertidal areas occupied by the mussel beds within a locality. In general, community differences both in composition and abundance were associated with these collections. (PDF contains 158 pages)

Seasonal Stability Tests in gretl. An Application to International Tourism Data

The seasonal stability tests of Canova & Hansen (1995) (CH) provide a method complementary to that of Hylleberg et al. (1990) for testing for seasonal unit roots. But the distribution of the CH tests are unknown in small samples. We present a method to numerically compute critical values and P-values for the CH tests for any sample size and any seasonal periodicity. In fact this method is applicable to the types of seasonality which are commonly in use, but also to any other.

Abundance and distribution patters of Hawaiian odontocetes: focus on O'ahu

This dissertation is an assessment of the status of odontocetes in Hawaiian waters focussing on O´ahu. The work builds on available literature, and on data collected by the author and by others in Hawaiian waters. Abundance and distribution patterns of odontocetes were derived from stranding and aerial survey data. A stranding network operated by the National Marine Fisheries Service, Pacific Area Office collected 187 stranding reports throughout the main Hawaiian Islands between 1937 and 2002. These reports included 16 odontocete species. Number of stranding reports increased over time and was highest on O´ahu. Strandings occurred throughout the year. The difference in number of strandings per month was not significant. Fifteen of the 16 species reported in the stranding record for the main Hawaiian Islands were also reported by aerial survey studies of the area between 1993 and 1998. Only 7 of the species reported were detected during aerial transects around O′ahu between 1998 and 2000. Based on the stranding record, Kogia sp., melon-headed whales, striped dolphins and dwarf killer whale appear to be more common than suggested by aerial surveys. Conversely, pilot whales and bottlenose dolphins were more common, according to aerial surveys, than predicted by the stranding data. Aerial surveys of waters between 0 and 500m around the Island of O′ahu showed that the most abundant species by frequency of occurrence was the pilot whale (30% of sightings), followed by the spinner (16%) and bottlenose dolphin (14%). Because of small sample size, abundance estimates for odontocetes have a high level of uncertainty. The unavailability of a correction factor for g(0)<1, and the reduced visibility below the aircraft further reduced accuracy and increased the inherent underestimation in the data. The most abundant species according to distance sampling estimates were spotted dolphins, pilot whales, false killer whales and spinner dolphins. A natural factor shaping the ecology of odontocete populations is predation pressure both by other odontocetes and, more frequently, by sharks. An account of predation by a tiger shark on a spotted dolphin near Penguin Banks is used as an example of the potential mechanisms of predation by sharks on odontocetes.

A histopathologic evaluation of gross lesions excised from commercially important North Altantic marine fishes

Histopathologic studies of lesions found in commercially important North Atlantic marine fishes are uncommon. As part of a comprehensive Northeast Fisheries Center program ("Ocean Pulse") to evaluate environmental and resource health on the U.S. Continental Shelf from Cape Hatteras to Nova Scotia, grossly visible lesions of the gills, integument, muscle, and viscera of primarily bottom-dwelling fishes were excised and examined using light microscopy. Several gadid and pleuronectid fishes accounted for most of the lesions observed. Most pathological examinations were incidental to samples taken for age and growth determination and evaluation of predator/prey relationships. Several gadids, with either gill, heart, or spleen lesions, were sampled more intensively. Gill lesions principally affected gadids and were caused by either microsporidans or an unidentified oocyte-like cell. The majority of gastrointestinal lesions consisted of encapsulated or encysted larval worms or microsporidan-induced cysts. Few heart lesions were found. Integumental lesioos included ulcers, lymphocystis, and trematode metacercariae. Liver lesions almost always consisted of encapsulated or encysted larval helminths. Necrotic granulomata were seen in muscle and microsporidan-induced granulomata in spleen. Although not numerous, histologically interesting lesions were noted in integument, heart, liver, spleen, and muscle of several fish species. Histologic study of tissues excised from a variety of demersal and pelagic fishes from the eastern North Atlantic (France, Germany, Spain) revealed assorted integumental, renal, hepatic, and splenic lesions. Small sample size and non-random sampling precluded obtaining a meaningful quantitative estimate of the prevalence of the observed lesions in the population at risk; however, a useful census has been made of the types of lesions present in commercially important marine fishes. (PDF file contains 20 pages.)

Association between CASP8-652 6N Del Polymorphism (rs3834129) and Colorectal Cancer Risk: Results from a Multi-Centric Study

The common 2652 6N del variant in the CASP8 promoter (rs3834129) has been described as a putative low-penetrance risk factor for different cancer types. In particular, some studies suggested that the deleted allele (del) was inversely associated with CRC risk while other analyses failed to confirm this. Hence, to better understand the role of this variant in the risk of developing CRC, we performed a multi-centric case-control study. In the study, the variant 2652 6N del was genotyped in a total of 6,733 CRC cases and 7,576 controls recruited by six different centers located in Spain, Italy, USA, England, Czech Republic and the Netherlands collaborating to the international consortium COGENT (COlorectal cancer GENeTics). Our analysis indicated that rs3834129 was not associated with CRC risk in the full data set. However, the del allele was under-represented in one set of cases with a family history of CRC (per allele model OR = 0.79, 95% CI = 0.69-0.90) suggesting this allele might be a protective factor versus familial CRC. Since this multi-centric case-control study was performed on a very large sample size, it provided robust clarification of the effect of rs3834129 on the risk of developing CRC in Caucasians.

Mechanisms underlying two kinds of surface effects on elastic constants

ABSTRACT Recently, people are confused with two opposite variations of elastic modulus with decreasing size of nano scale sample: elastic modulus either decreases or increases with decreas- ing sample size. In this paper, based on intermolecular potentials and a one dimensional model, we provide a unified understanding of the two opposite size effects. Firstly, we analyzed the mi- crostructural variation near the surface of an fcc nanofilm based on the Lennard-Jones potential. It is found that the atomic lattice near the surface becomes looser in comparison with the bulk, indicating that atoms in the bulk are located at the balance of repulsive forces, resulting in the decrease of the elastic moduli with the decreasing thickness of the film accordingly. In addition, the decrease in moduli should be attributed to both the looser surface layer and smaller coor- dination number of surface atoms. Furthermore, it is found that both looser and tighter lattice near the surface can appear for a general pair potential and the governing mechanism should be attributed to the surplus of the nearest force to all other long range interactions in the pair po- tential. Surprisingly, the surplus can be simply expressed by a sum of the long range interactions and the sum being positive or negative determines the looser or tighter lattice near surface re- spectively. To justify this concept, we examined ZnO in terms of Buckingham potential with long range Coulomb interactions. It is found that compared to its bulk lattice, the ZnO lattice near the surface becomes tighter, indicating the atoms in the bulk located at the balance of attractive forces, owing to the long range Coulomb interaction. Correspondingly, the elastic modulus of one- dimensional ZnO chain increases with decreasing size. Finally, a kind of many-body potential for Cu was examined. In this case, the surface layer becomes tighter than the bulk and the modulus increases with deceasing size, owing to the long range repulsive pair interaction, as well as the cohesive many-body interaction caused by the electron redistribution.

Body image and body composition: comparisons of young male elite soccer players and controls

[EN] The purpose of this study was to evaluate body composition and body image (perception and satisfaction) in a group of young elite soccer players and to compare the data with those of a control group (age and BMI matched). Participants were 56 volunteer males whose mean age and BMI were 19.6 (SD 1.3) years and 23.3 (SD 1.1) kg/m2, respectively. Results showed that soccer players have a higher lean mass and lower fat mass than controls. Moreover, body perception (difference between current and actual image) was more accurate in controls than in soccer players, and the results suggest a tendency for soccer players to aspire to have more muscle mass and body fat. Soccer players perceived an ideal image with significantly higher body-fat percentage than their current and actual images. There were no body-dissatisfaction differences between groups, however. Although the results are necessarily limited by the small sample size, the findings should be of interest to coaches of young elite soccer teams.

Strength, Deformation and Fracture in Metallic Nanostructures

An understanding of the mechanics of nanoscale metals and semiconductors is necessary for the safe and prolonged operation of nanostructured devices from transistors to nanowire- based solar cells to miniaturized electrodes. This is a fascinating but challenging pursuit because mechanical properties that are size-invariant in conventional materials, such as strength, ductility and fracture behavior, can depend critically on sample size when materials are reduced to sub- micron dimensions. In this thesis, the effect of nanoscale sample size, microstructure and structural geometry on mechanical strength, deformation and fracture are explored for several classes of solid materials. Nanocrystalline platinum nano-cylinders with diameters of 60 nm to 1 μm and 12 nm sized grains are fabricated and tested in compression. We find that nano-sized metals containing few grains weaken as sample diameter is reduced relative to grain size due to a change from deformation governed by internal grains to surface grain governed deformation. Fracture at the nanoscale is explored by performing in-situ SEM tension tests on nanocrystalline platinum and amorphous, metallic glass nano-cylinders containing purposely introduced structural flaws. It is found that failure location, mechanism and strength are determined by the stress concentration with the highest local stress whether this is at the structural flaw or a microstructural feature. Principles of nano-mechanics are used to design and test mechanically robust hierarchical nanostructures with structural and electrochemical applications. 2-photon lithography and electroplating are used to fabricate 3D solid Cu octet meso-lattices with micron- scale features that exhibit strength higher than that of bulk Cu. An in-situ SEM lithiation stage is developed and used to simultaneously examine morphological and electrochemical changes in Si-coated Cu meso-lattices that are of interest as high energy capacity electrodes for Li-ion batteries.

Effect of Microstructural Interfaces on the Mechanical Response of Crystalline Metallic Materials

Advances in nano-scale mechanical testing have brought about progress in the understanding of physical phenomena in materials and a measure of control in the fabrication of novel materials. In contrast to bulk materials that display size-invariant mechanical properties, sub-micron metallic samples show a critical dependence on sample size. The strength of nano-scale single crystalline metals is well-described by a power-law function, σαD^-n, where D is a critical sample size and n is a experimentally-fit positive exponent. This relationship is attributed to source-driven plasticity and demonstrates a strengthening as the decreasing sample size begins to limit the size and number of dislocation sources. A full understanding of this size-dependence is complicated by the presence of microstructural features such as interfaces that can compete with the dominant dislocation-based deformation mechanisms. In this thesis, the effects of microstructural features such as grain boundaries and anisotropic crystallinity on nano-scale metals are investigated through uniaxial compression testing. We find that nano-sized Cu covered by a hard coating displays a Bauschinger effect and the emergence of this behavior can be explained through a simple dislocation-based analytic model. Al nano-pillars containing a single vertically-oriented coincident site lattice grain boundary are found to show similar deformation to single-crystalline nano-pillars with slip traces passing through the grain boundary. With increasing tilt angle of the grain boundary from the pillar axis, we observe a transition from dislocation-dominated deformation to grain boundary sliding. Crystallites are observed to shear along the grain boundary and molecular dynamics simulations reveal a mechanism of atomic migration that accommodates boundary sliding. We conclude with an analysis of the effects of inherent crystal anisotropy and alloying on the mechanical behavior of the Mg alloy, AZ31. Through comparison to pure Mg, we show that the size effect dominates the strength of samples below 10 μm, that differences in the size effect between hexagonal slip systems is due to the inherent crystal anisotropy, suggesting that the fundamental mechanism of the size effect in these slip systems is the same.

Diet and condition of American Alligators (Alligator mississippiensis)in three central Florida lakes

Understanding the diet of crocodilians is important because diet affects condition, behavior, growth, and reproduction. By examining the diet of crocodilians, valuable knowledge is gained about predator-prey interactions and prey utilization among habitats. In this study, I examined the diet and condition of adult American alligators (Alligator mississippiensis) in three central Florida lakes, Griffin, Apopka, and Woodruff. Two hundred adult alligators were captured and lavaged from March through October 2001, from April through October 2002, and from April through August 2003. Alligators ate a variety of vertebrate and invertebrate prey, but vertebrates were more abundant and fish dominated alligator diets in the lakes. Species composition of fish varied among the lakes. The majority of the diet of alligators from Lakes Apopka and Woodruff was fish, 90% and 84% respectively. Lake Apopka alligators consumed a significantly (P = 0.006) higher proportion of fish in their diet. Fish were 54% of the diet of Lake Griffin alligators and the infrequent occurrence of reptiles, mammals, birds, and amphibians often resulted in a large biomass. Differences in alligator diets among lakes may be due to differences in sample size (higher numbers of samples from Lake Griffin), prey availability, habitat, prey vulnerability, or prey size. Alligator condition (Fulton’s Condition Factor, K) was significantly (P < 0.001) different among the lakes. Alligators from Lake Apopka had the highest condition, followed by those from Lake Griffin, and alligators from Lake Woodruff had the lowest condition. Composition of fish along with diversity and equitability of fish in alligator diets may have contributed to differences in condition among lakes. Condition was probably also due to factors other than diet such as alligator hunting behavior, alligator density, or year-round optimal temperature that prolongs feeding. The observed diet and condition differences probably reflect both habitat differences and prey availability in these three lakes.

Computational microscopy: turning megapixels into gigapixels

The layout of a typical optical microscope has remained effectively unchanged over the past century. Besides the widespread adoption of digital focal plane arrays, relatively few innovations have helped improve standard imaging with bright-field microscopes. This thesis presents a new microscope imaging method, termed Fourier ptychography, which uses an LED to provide variable sample illumination and post-processing algorithms to recover useful sample information. Examples include increasing the resolution of megapixel-scale images to one gigapixel, measuring quantitative phase, achieving oil-immersion quality resolution without an immersion medium, and recovering complex three dimensional sample structure.