(Table 1) Bulk and clay mineralogy at DSDP Leg 66 Holes

During Leg 66 eight sites on an active margin transect off southern Mexico were drilled in order to determine the nature of ocean-continent transition across a subduction zone. Present outcrops of Mesozoic to Precambrian basement at the coast intruded by Mesozoic magmas within only 65 km of the Middle America Trench axis indicate truncation of the continental margin, tectonic removal of an accretionary zone, and consumption of ocean sediments and crust by subduction.

Mineralogical compositions of sediment samples from the San Francisco Bay coastal system

The mineralogical compositions of 119 samples collected from throughout the San Francisco Bay coastal system, including bayfloor and seafloor, area beaches, cliff outcrops, and major drainages, were determined using X-ray diffraction (XRD). Comparison of the mineral concentrations and application of statistical cluster analysis of XRD spectra allowed for the determination of provenances and transport pathways. The use of XRD mineral identifications provides semi-quantitative compositions needed for comparisons of beach and offshore sands with potential cliff and river sources, but the innovative cluster analysis of XRD diffraction spectra provides a unique visualization of how groups of samples within the San Francisco Bay coastal system are related so that sand-sized sediment transport pathways can be inferred. The main vector for sediment transport as defined by the XRD analysis is from San Francisco Bay to the outer coast, where the sand then accumulates on the ebb tidal delta and also moves alongshore. This mineralogical link defines a critical pathway because large volumes of sediment have been removed from the Bay over the last century via channel dredging, aggregate mining, and borrow pit mining, with comparable volumes of erosion from the ebb tidal delta over the same period, in addition to high rates of shoreline retreat along the adjacent, open-coast beaches. Therefore, while previously only a temporal relationship was established, the transport pathway defined by mineralogical and geochemical tracers support the link between anthropogenic activities in the Bay and widespread erosion outside the Bay. The XRD results also establish the regional and local importance of sediment derived from cliff erosion, as well as both proximal and distal fluvial sources. This research is an important contribution to a broader provenance study aimed at identifying the driving forces for widespread geomorphic change in a heavily urbanized coastal-estuarine system.

Sedimentological and paleomagnetic investigations on two gravity cores and ODP sites 113-690 and 693 off Kapp Norvegia, Antarctic continental margin

Oligocene to Quaternary sediments were recovered from the Antarctic continental margin in the eastern Weddell Sea during ODP Leg 113 and Polarstern expedition ANT-VI. Clay mineral composition and grain size distribution patterns are useful for distinguishing sediments that have been transported by ocean currents from those that were ice-rafted. This, in turn, has assisted in providing insights about the changing late Paleogene to Neogene sedimentary environment as the cryosphere developed in Antarctica. During the middle Oligocene, increasing glacial conditions on the continent are indicated by the presence of glauconite sands, that are interpreted to have formed on the shelf and then transported down the continental slope by advancing glaciers or as a result of sea-level lowering. The dominance of illite and a relatively high content of chlorite suggest predominantly physical weathering conditions on the continent. The high content of biogenic opal from the late Miocene to the late Pliocene resulted from increased upwelling processes at the continental margin due to increased wind strength related to global cooling. Partial melting of the ice-sheet occurred during an early Pliocene climate optimum as is shown by an increasing supply of predominantly current-derived sediment with a low mean grain size and peak values of smectite. Primary productivity decreased at ~ 3 Ma due to the development of a permanent sea-ice cover close to the continent. Late Pleistocene sediments are characterized by planktonic foraminifers and biogenic opal, concentrated in distinct horizons reflecting climatic cycles. Isotopic analysis of AT. pachyderma produced a stratigraphy which resulted in a calculated sedimentation rate of 1 cm/k.y. during the Pleistocene. Primary productivity was highest during the last three interglacial maxima and decreased during glacial episodes as a result of increasing sea-ice coverage.

Sedimentological investigations of a sediment core profile from the continental slope of the South Orkney Islands

Sediment patterns such as texture, composition, and facies from three selected areas of the Antarctic continental margin of the Weddell Sea are discussed in relation to environmental variations of the Quaternary hydrosphere and kryosphere. Advance and retreat of ice shelves as well as oscillations in sea ice coverage are reflected by particular sediment facies. The distribution of ice-rafted detritus tracks the Antarctic Coastal Current, and the Weddell Sea Bottom water contour current can be recognized by its distinctive winnowing and erosion pattern. Distribution and abundance of biogenic sediment components are mainly controlled by duration of sea ice coverage reflecting the long-term climatic evolution.

Stable oxygen, hydrogene and chlorine isotopes of mid-Atlantic abyssal peridotites

Serpentinized abyssal peridotites sampled by the Ocean Drilling Program Leg 209 along the mid-Atlantic Ridge near the 15°20'N Fracture Zone have been analyzed for oxygen, hydrogen, and chlorine isotope compositions in order to determine isotopic behavior under a wide range of serpentinization conditions and place constraints on fluid history. Oxygen and hydrogen thermometry suggests peak serpentinization temperatures of 300-500°C. Serpentine separates have low deltaD values possibly due to a magmatic fluid component or low-temperature exchange during seafloor weathering. Chlorine geochemistry focused on three holes: 1274A and 1272A (serpentinized peridotites) and 1268A (serpentinite locally altered to talc). Concentrations of both, water-soluble chloride (WSC) and structurally bound chloride (SBC) are significantly lower at Hole 1268A compared to Holes 1274A and 1272A. The delta37Cl values for WSC and SBC of serpentinites in Holes 1274A and 1272A are slightly positive (avg. WSC = 0.20 per mil, n = 22 and avg. SBC = 0.35 per mil, n = 22), representing typical seawater-hydration conditions commonly determined for abyssal peridotite. The SBC of serpentinites from Hole 1268A are also positive (avg. = 0.63 per mil); whereas, the SBC in talc-dominated samples is negative (avg. = -1.22 per mil). The WSC of both talc- and serpentine-dominated samples are also negative (avg. = -0.15 per mil). We interpret the chlorine isotope data to preserve a record of multiple fluid events. As seawater hydrated the peridotite, 37Cl was preferentially incorporated into the forming serpentine and water-soluble salts, yielding similar delta37Cl values on a regional scale as sampled by Holes 1268A, 1274A and 1272A. The resultant pore fluid was left depleted in 37Cl. Locally (Hole 1268A), this evolved fluid was remobilized possibly due to the initiation of hydrothermal circulation in response to emplacement of a mafic magma body. The low delta37Cl pore fluids attained elevated SiO2 and sulfur concentrations due to interaction with the gabbroic intrusion and, when ascending through the surrounding serpentinite, caused formation of isotopically negative talc. This secondary fluid also flushed the preserved serpentinite of its previously formed salts, resulting in negative delta37Cl WSC values. The delta37Cl SBC values of the serpentinite samples remained unmodified by reaction with the secondary fluid.

Chemistry and fluid inclusions of the sheeted dike comples of ODP Holes 137-504B and 140-504B

Fluid inclusions in variably altered diabase recovered from Ocean Drilling Program Legs 137 and 140 at Hole 504B, Costa Rica Rift, exhibit fluid salinities up to 3.7 times that of seawater values (11.7 wt% NaCl equivalent) and exhibit uncorrected homogenization temperatures of 125°C to 202°C. The liquid-dominated inclusions commonly are entrapped in zones of secondary plagioclase and may be primary in origin. Fluid salinities are similar to compositions of fluids venting on the seafloor (0.4-7.0 wt% NaCl) and overlap with those measured in metabasalt samples recovered from near the Kane Fracture Zone on the Mid-Atlantic Ridge and from the Troodos ophiolite, Cyprus. The salinity variations may reflect hydration reactions involving formation of secondary mineral assemblages under rock-dominated conditions, which modify the ionic strength of hydrothermal fluids by consuming or liberating water and chloride ion. Rare CO2-CH4-bearing inclusions, subjacent to zones where talc after olivine becomes an important secondary mineral phase (1700 mbsf), may have formed due to local interaction of seawater and olivine at low water to rock ratios. Corrected average fluid inclusion homogenization temperatures exhibit a gradient from 159°C at a depth of 1370 mbsf to 183°C at a depth of 1992 mbsf and are in apparent equilibrium with the present conductive downhole temperatures. These data indicate that fluid inclusions may be used to estimate downhole temperatures if logging data are unavailable. The compositional and thermal evolution of the diabase-hosted fluids may reflect late-stage, off-axis circulation and conductive heating of compositionally modified seawater in the sheeted dike complex at Hole 504B.

Clay minerals in the Norwegian Sea and Fram Strait, investigation from sediment traps and cores

The grain size distribution and clay mineral composition of lithogenic particles of ice-rafted material, sinking matter, surface sediments, as well as from deep-sea cores are analysed. The samples were collected in the Fram Strait, the Arctic Ocean, and the Norwegian Sea during several expeditions with the research vessels "Polarstern", "Meteor" and "Poseidon", and Norwegian rearch vessels. Sinking matter was caught with sediment traps, fitted with timer-controlled sample changers, which had been deployde in the sea for usually one year.

Special reports on the mineral resources of Great Britain.

v.31 Ball clays -- v.32 Granites of Scotland -- v.33 Synopsis of the mineral resources of Scotland -- v.34 Rock wool -- v. 35 Limestones of Scotland -- v.36 Cambro-Ordovician limestones and dolomites of the Ord and Torran areas, SKye and the Kishorn area, Ross-Shire -- v.37 Limestones of Scotland : chemical analyses and petrography

Health hazard evaluation report HETA 90-390-2065, MHETA 86-012-2065 : R.T. Vanderbilt Company, Gouverneur, New York /

Cover title.

Effect of water on olivine single crystals plasticity, deformed under high pressure and high temperature

The Earth's upper mantle, mainly composed of olivine, is seismically anisotropic. Seismic anisotropy attenuation has been observed at 220km depth. Karato et al. (1992) attributed this attenuation to a transition between two deformation mechanisms, from dislocation creep above 220km to diffusion creep below 220km, induced by a change in water content. Couvy (2005) and Mainprice et al. (2005) predicted a change in Lattice Preferred Orientation induced by pressure, which comes from a change of slip system, from [100] slip to [001] slip, and is responsible for the seismic anisotropy attenuation. Raterron et al. (2007) ran single crystal deformation experiments under anhydrous conditions and observed that the slip system transition occurs around 8GPa, which corresponds to a depth of 260Km. Experiments were done to quantify the effects of water on olivine single crystals deformed using D-DIA press and synchrotron beam. Deformations were carried out in uniaxial compression along [110]c, [011]c, and [101]c, crystallographic directions, at pressure ranging from 4 to 8GPa and temperature between 1373 and 1473K. Talc sleeves about the annulus of the single crystals were used as source of water in the assembly. Stress and specimen strain rates were calculated by in-situ X-ray diffraction and time resolved imaging, respectively. By direct comparison of single crystals strain rates, we observed that [110]c deforms faster than [011]c below 5GPa. However above 6GPa [011]c deforms faster than [110]c. This revealed that [100](010) is the dominant slip system below 5GPa, and above 6GPa [001](010) becomes dominant. According to our results, the slip system transition, which is induced by pressure, occurs at 6GPa. Water influences the pressure where the switch over occurs, by lowering the transition pressure. The pressure effect on the slip systems activity has been quantified and the hydrolytic weakening has also been estimated for both orientations. Data also shows that temperature affects the slip system activity. The regional variation of the depth for the seismic anisotropy attenuation, which would depend on local hydroxyl content and temperature variations and explains the seismic anisotropy attenuation occurring at about 220Km depth in the mantle, where the pressure is about 6GPa. Deformation of MgO single crystal oriented [100], [110] and [111] were also performed. The results predict a change in the slip system activity at 23GPa, again induced by pressure. This explains the seismic anisotropy observed in the lower mantle.

Uso da cinza do bagaço da cana-de-açúcar como matéria-prima na substituição dos fundentes para aplicações em porcelanato

The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.

A evolução do turismo no Seridó: uma análise à luz do modelo de Butler

Tourism is configured as an activity that presents constant movement could boost local development in the economic, sociocultural and human in locations with potential for structuring and such. Because it is a dynamic activity, tourism allows changes in its flow, extending the periods of seasonality. To this end, in view of the aforementioned dynamics, it becomes relevant to the presence of tourism planning, initially starting from the government so that it create laws and standards and develop projects for the management of activities in an orderly way, seeking citizen participation, making essential the presence of actors and agents in local tourism, expanding democracy and knowledge of their place of origin. In this scenario, the Ministry of Tourism is emerging with the National Tourism Plan which incorporates among its actions, the Regionalization Program Guide, adopting a model of regional local management, a participatory manner, through the bodies of governance imposed at the poles, and the shares of public policy in their various departments most responsible for promoting tourism in pole Seridó. This scientific work aims to analyze the pole Seridó, under the theory of tourism area life cycle (TALC) proposed by BUTLER (1980), locating actions for tourism and chronology of the locality applied the proposed process activity. For both the methodology is descriptive and exploratory, qualitative approach, historical, descriptive and narrative level, non-probability sampling, using secondary sources, through documents and other records occurred during the planning processes in the region, in order to have access to information related to the planning process of tourism in Seridó, using as a way to research the data collected the technique of content analysis. As a conclusion of this study it is observed that from the survey in relation to the history of tourism in the region, economic activities of livestock, cotton industry, mining and ceramics industry were responsible for the initiation of tourism in the locality through the flow directed to the same, the insertion of the first hotels and performing traditional events, giving rise to the demand for public policies that aided in directing the activity being, therefore, inserted into the engagement phase, the second phase proposed by BUTLER (1980) model, and the study was terminated with suggestions for the continuation of tourism in the region.

Estudo do aproveitamento de resíduos PAE no desenvolvimento de materiais cerâmicos

This work presents a new ceramic material obtained through the incorporation of solid waste from the steel industry and known as dedusting powder PAE - in ceramic formulations based on clay, potassium and sodium feldspars, kaolin and talc. Formulations were prepared with ceramic residue levels of 0% (basic mass - MB), 2%, 4% and 8%, subjected to firing at temperatures of 1000 ° C, 1050ºC, 1100ºC and 1150ºC for periods of 15 min. and 120 min. The physicchemical and mechanical properties of these ceramic formulations were determined based on the firing temperature, residence time in the oven and the percentage of waste. Since the physicochemical and mechanical properties of the sintered materials were evaluated by chemical analysis techniques (fluorescence X-rays - FRX), particle size distribution, specific surface area, apparent density, structural analysis by diffraction of X-rays (DRX) and characterization of surface by scanning electron microscopy (SEM). The magnetic response characteristics and the pattern of magnetic ferrites of the samples were analyzed in the assay conditions, having noticed that the saturation magnetic susceptibility depend on the sintering temperature of the material and it is associated with its crystal structure. From the analysis results, it was concluded that the ceramic material with better physical and mechanical properties is obtained when the 8% from PAE residue is added to standard formulation under the burn time of 15 minutes and temperature of 1150ºC.