A study of the turbulence of the neutral medium in two nearby spiral galaxies

The width of the 21 cm line (HI) emitted by spiral galaxies depends on the physical processes that release energy in the Interstellar Medium (ISM). This quantity is called velocity dispersion (σ) and it is proportional first of all to the thermal kinetic energy of the gas. The accepted theoretical picture predicts that the neutral hydrogen component (HI) exists in the ISM in two stable phases: a cold one (CNM, with σ~0.8 km/s) and a warm one (WNM, with σ~8 km/s). However, this is called into question by the observation that the HI gas has usually larger velocity dispersions. This suggests the presence of turbulence in the ISM, although the energy sources remain unknown. In this thesis we want to shed new light on this topic. We have studied the HI line emission of two nearby galaxies: NGC6946 and M101. For the latter we used new deep observations obtained with the Westerbork radio interferometer. Through a gaussian fitting procedure, we produced dispersion maps of the two galaxies. For both of them, we compared the σ values measured in the spiral arms with those in the interarms. In NGC6946 we found that, in both arms and interarms, σ grows with the column density, while we obtained the opposite for M 101. Using a statistical analysis we did not find a significant difference between arm and interarm dispersion distributions. Producing star formation rate density maps (SFRD) of the galaxies, we studied their global and local relations with the HI kinetic energy, as inferred from the measured dispersions. For NGC6946 we obtained a good log-log correlation, in agreement with a simple model of supernova feedback driven turbulence. This shows that in this galaxy turbulent motions are mainly induced by the stellar activity. For M 101 we did not find an analogous correlation, since the gas kinetic energy appears constant with the SFRD. We think that this may indicate that in this galaxy turbulence is driven also by accretion of extragalactic material.

Wound stimulation by growth-arrested human keratinocytes and fibroblasts: HP802-247, a new-generation allogeneic tissue engineering product

HP802-247 is a new-generation, allogeneic tissue engineering product consisting of growth-arrested, human keratinocytes (K) and fibroblasts (F) delivered in a fibrin matrix by a spray device.

Radiological stab wound channel depiction with instillation of contrast medium

The radiological depiction of stab wounds in soft-tissues using multislice computed tomography is difficult and the hereby obtained images often lack contrast. To overcome these shortcomings we tried a new method. We gently instilled the contrast medium Lipiodol((R)) Ultra-fluide into five experimentally induced stab wounds on a pork haunch. Subsequent MSCT reconstructions of the wounds delivered clear, for medical laymen easily appreciable images regarding the stab direction and the stab depth. We believe that this easy and rapid technique can be useful in the examination of stab wounds in living and dead victims of sharp trauma.

Minimally invasive post-mortem CT-angiography in a case involving a gunshot wound

Non-contrast post-mortem computed tomography (pm-CT) is useful in the evaluation of bony pathologies, whereas minimally invasive pm-CT-angiography allows for the detection of subtle vascular lesions. We present a case of an accidentally self-inflicted fatal bullet wound to the chest where pm-CT-angiography revealed a small laceration of the anterior interventricular branch of the left coronary artery and a tiny disruption of the right ventricle with pericardial and pleural effusion. Subsequent autopsy confirmed our radiological findings. Post-mortem CT-angiography has a great potential for the detection of vascular lesions and can be considered equivalent to autopsy for selected cases in forensic medicine.

Bone marrow-derived cells in palatal wound healing

OBJECTIVE: Myofibroblasts are responsible for contraction and scarring after cleft palate repair. This leads to growth disturbances in the upper jaw. We hypothesized that cells from the bone marrow are recruited to palatal wounds and differentiate into myofibroblasts. METHODS: We transplanted bone marrow from green fluorescent protein (GFP)-transgenic rats into lethally irradiated wild-type rats. After recovery, experimental wounds were made in the palatal mucoperiosteum, and harvested 2 weeks later. GFP-expressing cells were identified using immunostaining. Myofibroblasts, activated fibroblasts, endothelial cells, and myeloid cells were quantified with specific markers. RESULTS: After transplantation, 89 ± 8.9% of mononuclear cells in the blood expressed the GFP and about 50% of adherent cells in the bone marrow. Tissue obtained during initial wounding contained only minor numbers of GFP-positive cells, like adjacent control tissue. Following wound healing, 8.1 ± 5.1% of all cells in the wound area were positive, and 5.0 ± 4.0% of the myofibroblasts, which was significantly higher than in adjacent tissue. Similar percentages were found for activated fibroblasts and endothelial cells, but for myeloid cells it was considerably higher (22 ± 9%). CONCLUSIONS: Bone marrow-derived cells contribute to palatal wound healing, but are not the main source of myofibroblasts. In small wounds, the local precursor cells are probably sufficient to replenish the defect.

Pistol thrown to the ground by shooter after fatal self inflicted gunshot wound to the chest

We report the case of a 46-year-old man found dead in his apartment in a chair with a gunshot wound in his chest. All circumstances pointed to suicide as the manner of death. Finding the weapon, a SIG Sauer P228 pistol, about 2 m away from the decedent with an obstacle between weapon and corpse however generated speculation about third party involvement. Scene investigations and ballistic calculations showed that with a high probability the weapon must have been purposefully thrown away by the decedent after he fired the lethal gunshot.

Suicidal knife wound to the heart: challenges in reconstructing wound channels with post mortem CT and CT-angiography

We present a case of an individual who stabbed himself through the heart with a large knife. Post mortem computed tomography (CT) and CT-angiography were used to assess the stab channel and to reconstruct the sequence of events. After penetrating injuries to the chest, both the intra-thoracic organs and the injury causing instrument may shift (e.g. from pnemothorax) and render forensic reconstructions more challenging. This case report illustrates the potentials and the pitfalls of CT for the reconstruction of penetrating injures to the chest.

Period prevalence and risk factors for postoperative short-term wound complications in vulvar cancer: a cross-sectional study

Although clinicians recognize that postoperative wound management in patients with vulvar cancer (VC) is challenging, the prevalence and risk factors for different types of short-term wound complications (WCs) remain unclear. The aims of this study were: (1) to determine the period prevalence of postoperative short-term WCs and (2) to identify risk factors associated with short-term WCs in patients with VC.

Tissue response and wound healing after placement of two types of bioengineered grafts containing vital cells in submucosal maxillary pouches: an experimental pilot study in rabbits

PURPOSE: This pilot study evaluated the wound healing and tissue response after placement of two different skin substitutes in subgingival mucosal pouches in rabbits. MATERIALS AND METHODS: Four rabbits were selected to receive a commercially available skin substitute consisting of a collagen matrix with fibroblasts and an epithelial layer (test membrane 1) and a prototype device consisting of a collagen matrix with fibroblasts only (test membrane 2). In each rabbit, two horizontal incisions were made in the buccal alveolar mucosa of the maxilla bilaterally to create submucosal pouches. Three pouches in each animal were filled with either the test 1 or test 2 membranes, and one pouch was left without a membrane (sham-operated control). All rabbits were sacrificed after a healing period of 4 weeks, and histologic samples were prepared and examined. RESULTS: After a healing period of 1 month, both tested membranes were still visible in the sections. Test membrane 1 was still bilayered, contained inflammatory cells in its center, and was encapsulated by a thick fibrous tissue. Numerous ectopic calcifications were evident in the collagenous part of the membrane and in association with some basal epithelial cells. Test membrane 2 was also encapsulated in fibrous tissue, with inflammatory cells present only between the fibrous encapsulation and the remnants of the membrane. For test membrane 2, no calcifications were visible. CONCLUSIONS: Test membrane 1 seemed to be more resistant to degradation, but there was also a more pronounced inflammatory reaction in comparison to test membrane 2, especially in the vicinity of the keratinocytes. The significance of the ectopic calcifications, along with that of the resorption or degradation processes of both tested membranes, must be evaluated in future experimental studies, with different time points after implantation examine

Long-term effectiveness of canine-to-canine bonded flexible spiral wire lingual retainers

The flexible spiral wire (FSW) canine-to-canine lingual retainer bonded to all 6 anterior teeth is a frequently used type of mandibular fixed retainer. This study aimed to assess the long-term effectiveness of FSW canine-to-canine lingual retainers in maintaining the alignment of the mandibular anterior teeth after orthodontic treatment.

The recruitment of bone marrow-derived cells to skin wounds is independent of wound size

Wounded skin recruits progenitor cells, which repair the tissue defect. These cells are derived from stem cells in several niches in the skin. In addition, bone marrow-derived cells (BMDCs) are recruited and contribute to wound repair. We hypothesized that larger wounds recruit more cells from the bone marrow. Wild-type rats were lethally irradiated and transplanted with bone marrow cells from green fluorescent protein (GFP)-transgenic rats. Seven weeks later, 4, 10, and 20 mm wounds were created. The wound tissue was harvested after 14 days. The density of GFP-positive cells in the wounds and the adjacent tissues was determined, as well as in normal skin from the flank. Bone marrow-derived myofibroblasts, activated fibroblasts, and macrophages were also quantified. After correction for cell density, the recruitment of BMDCs (23±11%) was found to be independent of wound size. Similar fractions of GFP-positive cells were also detected in nonwounded adjacent tissue (29±11%), and in normal skin (26±19%). The data indicate that BMDCs are not preferentially recruited to skin wounds. Furthermore, wound size does not seem to affect the recruitment of BMDCs.

Development of a model-based transient calibration process for diesel engine electronic control module tables – Part 1: data requirements, processing, and analysis

This is the first part of a study investigating a model-based transient calibration process for diesel engines. The motivation is to populate hundreds of parameters (which can be calibrated) in a methodical and optimum manner by using model-based optimization in conjunction with the manual process so that, relative to the manual process used by itself, a significant improvement in transient emissions and fuel consumption and a sizable reduction in calibration time and test cell requirements is achieved. Empirical transient modelling and optimization has been addressed in the second part of this work, while the required data for model training and generalization are the focus of the current work. Transient and steady-state data from a turbocharged multicylinder diesel engine have been examined from a model training perspective. A single-cylinder engine with external air-handling has been used to expand the steady-state data to encompass transient parameter space. Based on comparative model performance and differences in the non-parametric space, primarily driven by a high engine difference between exhaust and intake manifold pressures (ΔP) during transients, it has been recommended that transient emission models should be trained with transient training data. It has been shown that electronic control module (ECM) estimates of transient charge flow and the exhaust gas recirculation (EGR) fraction cannot be accurate at the high engine ΔP frequently encountered during transient operation, and that such estimates do not account for cylinder-to-cylinder variation. The effects of high engine ΔP must therefore be incorporated empirically by using transient data generated from a spectrum of transient calibrations. Specific recommendations on how to choose such calibrations, how many data to acquire, and how to specify transient segments for data acquisition have been made. Methods to process transient data to account for transport delays and sensor lags have been developed. The processed data have then been visualized using statistical means to understand transient emission formation. Two modes of transient opacity formation have been observed and described. The first mode is driven by high engine ΔP and low fresh air flowrates, while the second mode is driven by high engine ΔP and high EGR flowrates. The EGR fraction is inaccurately estimated at both modes, while EGR distribution has been shown to be present but unaccounted for by the ECM. The two modes and associated phenomena are essential to understanding why transient emission models are calibration dependent and furthermore how to choose training data that will result in good model generalization.

Development of a model-based transient calibration process for diesel engine electronic control module tables – Part 2: modelling and optimization

This is the second part of a study investigating a model-based transient calibration process for diesel engines. The first part addressed the data requirements and data processing required for empirical transient emission and torque models. The current work focuses on modelling and optimization. The unexpected result of this investigation is that when trained on transient data, simple regression models perform better than more powerful methods such as neural networks or localized regression. This result has been attributed to extrapolation over data that have estimated rather than measured transient air-handling parameters. The challenges of detecting and preventing extrapolation using statistical methods that work well with steady-state data have been explained. The concept of constraining the distribution of statistical leverage relative to the distribution of the starting solution to prevent extrapolation during the optimization process has been proposed and demonstrated. Separate from the issue of extrapolation is preventing the search from being quasi-static. Second-order linear dynamic constraint models have been proposed to prevent the search from returning solutions that are feasible if each point were run at steady state, but which are unrealistic in a transient sense. Dynamic constraint models translate commanded parameters to actually achieved parameters that then feed into the transient emission and torque models. Combined model inaccuracies have been used to adjust the optimized solutions. To frame the optimization problem within reasonable dimensionality, the coefficients of commanded surfaces that approximate engine tables are adjusted during search iterations, each of which involves simulating the entire transient cycle. The resulting strategy, different from the corresponding manual calibration strategy and resulting in lower emissions and efficiency, is intended to improve rather than replace the manual calibration process.