Aquaponics: integrating fish feeding rates and ion waste production for strawberry hydroponics

Aquaponics is the science of integrating intensive fish aquaculture with plant production in recirculating water systems. Although ion waste production by fish cannot satisfy all plant requirements, less is known about the relationship between total feed provided for fish and the production of milliequivalents (mEq) of different macronutrients for plants, especially for nutrient flow hydroponics used for strawberry production in Spain. That knowledge is essential to consider the amount of macronutrients available in aquaculture systems so that farmers can estimate how much nutrient needs to be supplemented in the waste water from fish, to produce viable plant growth. In the present experiment, tilapia (Oreochromis niloticus L.) were grown in a small-scale recirculating system at two different densities while growth and feed consumption were noted every week for five weeks. At the same time points, water samples were taken to measure pH, EC25, HCO3 – , Cl – , NH4 + , NO2 – , NO3 – , H2PO4 – , SO4 2– , Na + , K+ , Ca 2+ and Mg 2+ build up. The total increase in mEq of each ion per kg of feed provided to the fish was highest for NO3 - , followed, in decreasing order, by Ca 2+ , H2PO4 – , K+ , Mg 2+ and SO4 2– . The total amount of feed required per mEq ranged from 1.61- 13.1 kg for the four most abundant ions (NO3 – , Ca 2+ , H2PO4 – and K+ ) at a density of 2 kg fish m–3 , suggesting that it would be rather easy to maintain small populations of fish to reduce the cost of hydroponic solution supplementation for strawberries.

Habitat management for conservation of pollinators in agro-ecosystems of Central Spain

La gestión de hábitat orientada a la conservación de polinizadores en los agro-ecosistemas requiere una selección de especies vegetales atendiendo fundamentalmente a dos criterios: i) el potencial atractivo de sus flores a los polinizadores; y ii) la simplicidad en su manejo agronómico. Además de estas premisas, es necesario considerar la capacidad invasora de estas especies vegetales, debido a que algunas de las más atractivas pueden resultar invasoras en determinados agro-ecosistemas. Por lo tanto, es preciso determinar qué especies vegetales son las más indicadas para ser implementadas en cada agro-ecosistema. En la presente tesis doctoral se plantea la búsqueda de las especies vegetales adecuadas para atraer polinizadores en los agro-ecosistemas del centro de España. En una primera aproximación, se ha evaluado la atracción y expansión espacial (potencial invasivo) de seis plantas perennes de la familia Lamiaceae (aromáticas), elegidas por ser nativas de la región mediterránea. La elección de las especies vegetales se ha llevado a cabo con el fin de crear márgenes funcionales basados en la mezcla de especies vegetales con distintos periodos de floración, de modo que prolonguen la disponibilidad de recursos florales en el tiempo. Tras un primer año dedicado al establecimiento de las especies aromáticas, en los dos años siguientes se ha estudiado la atracción individual y combinada de las especies vegetales sobre los polinizadores, y como ésta se ve afectada por la densidad y la morfología floral, utilizando para ello un diseño experimental en bloques al azar. Los resultados de este estudio han puesto de manifiesto que la morfología floral no tuvo influencia sobre la atracción de las especies vegetales, pero si la densidad floral, puesto que las especies vegetales con mayor densidad de flores (Nepeta tuberosa e Hyssopus officinalis) han mostrado mayor atracción a polinizadores. Cabe destacar que de las seis especies consideradas, dos especies de verano (Melissa officinalis y Thymbra capitata) no han contribuido de forma efectiva a la atracción de la mezcla hacia los polinizadores, mostrando una reducción significativa de este parámetro respecto a las otras especies aromáticas a lo largo del verano. Se ha observado que ninguna de las especies aromáticas evaluadas ha mostrado tendencia invasora a lo largo del estudio. En base a estos resultados, se puede concluir que entre las especies aromáticas estudiadas, N. tuberosa, H. officinalis y Salvia verbenaca son las que ofrecen mayor potencial para ser utilizadas en la conservación de polinizadores. De forma similar al caso de las plantas aromáticas, se ha llevado a cabo una segunda experimentación que incluía doce plantas anuales con floración de primavera, en la que se evaluó la atracción a polinizadores y su comportamiento agronómico. Este estudio con especies herbáceas se ha prolongado durante dos años, utilizando un diseño experimental de bloques aleatorios. Las variables analizadas fueron: el atractivo de las distintas especies vegetales a los polinizadores, su eficiencia de atracción (calculada como una combinación de la duración de la floración y las visitas de insectos), su respuesta a dos tipos de manejo agronómico (cultivo en mezcla frente a monocultivo; laboreo frente a no-laboreo) y su potencial invasivo. Los resultados de esta segunda experimentación han mostrado que las flores de Borago officinalis, Echium plantagineum, Phacelia tanacetifolia y Diplotaxis tenuifolia son atractivas a las abejas, mientras que las flores de Calendula arvensis, Coriandrum sativum, D. tenuifolia y Lobularia maritima son atractivas a los sírfidos. Con independencia del tipo de polinizadores atraídos por cada especie vegetal, se ha observado una mayor eficiencia de atracción en parcelas con monocultivo de D. tenuifolia respecto a las parcelas donde se cultivó una mezcla de especies herbáceas, si bien en estas últimas se observó mayor eficiencia de atracción que en la mayoría de parcelas mono-específicas. Respecto al potencial invasivo de las especies herbáceas, a pesar de que algunas de las más atractivas a polinizadores (P. tanacetifolia and C. arvensis) mostraron tendencia a un comportamiento invasor, su capacidad de auto-reproducción se vio reducida con el laboreo. En resumen, D. tenuifolia es la única especie que presentó una alta eficiencia de atracción a distintos tipos de polinizadores, conjuntamente con una alta capacidad de auto-reproducción pero sin mostrar carácter invasor. Comparando el atractivo de las especies vegetales utilizadas en este estudio sobre los polinizadores, D. tenuifolia es la especie más recomendable para su cultivo orientado a la atracción de polinizadores en agro-ecosistemas en el centro de España. Esta especie herbácea, conocida como rúcula, tiene la ventaja añadida de ser una especie comercializada para el consumo humano. Además de su atractivo a polinizadores, deben considerarse otros aspectos relacionados con la fisiología y el comportamiento de esta especie vegetal en los agro-ecosistemas antes de recomendar su cultivo. Dado que el cultivo en un campo agrícola de una nueva especie vegetal implica unos costes de producción, por ejemplo debidos a la utilización de agua de riego, es necesario evaluar el incremento en dichos costes en función de demanda hídrica específica de esa especie vegetal. Esta variable es especialmente importante en zonas dónde se presentan sequías recurrentes como es el caso del centro y sur-este de la península Ibérica. Este razonamiento ha motivado un estudio sobre los efectos del estrés hídrico por sequía y el estrés por déficit moderado y severo de riego sobre el crecimiento y floración de la especie D. tenuifolia, así como sobre la atracción a polinizadores. Los resultados muestran que tanto el crecimiento y floración de D. tenuifolia como su atracción a polinizadores no se ven afectados si la falta de riego se produce durante un máximo de 4 días. Sin embargo, si la falta de riego se extiende a lo largo de 8 días o más, se observa una reducción significativa en el crecimiento vegetativo, el número de flores abiertas, el área total y el diámetro de dichas flores, así como en el diámetro y longitud del tubo de la corola. Por otro lado, el estudio pone de manifiesto que un déficit hídrico regulado permite una gestión eficiente del agua, la cual, dependiendo del objetivo final del cultivo de D. tenuifolia (para consumo o solo para atracción de polinizadores), puede reducir su consumo entre un 40 y un 70% sin afectar al crecimiento vegetativo y desarrollo floral, y sin reducir significativamente el atractivo a los polinizadores. Finalmente, esta tesis aborda un estudio para determinar cómo afecta el manejo de hábitat a la producción de los cultivos. En concreto, se ha planteado una experimentación que incluye márgenes mono-específicos y márgenes con una mezcla de especies atractivas a polinizadores, con el fin de determinar su efecto sobre la producción del cultivo de cilantro (C. sativum). La elección del cultivo de cilantro se debe a que requiere la polinización de insectos para su reproducción (aunque, en menor medida, puede polinizarse también por el viento), además de la facilidad para estimar su producción en condiciones semi-controladas de campo. El diseño experimental consistía en la siembra de márgenes mono-específicos de D. tenuifolia y márgenes con mezcla de seis especies anuales situados junto al cultivo de cilantro. Estos cultivos con márgenes florales fueron comparados con controles sin margen floral. Además, un segundo grupo de plantas de cilantro situadas junto a todos los tratamientos, cuyas flores fueron cubiertas para evitar su polinización, sirvió como control para evaluar la influencia de los polinizadores en la producción del cultivo. Los resultados muestran que la presencia de cualquiera de los dos tipos de margen floral mejora el peso y el porcentaje de germinación de las semillas de cilantro frente al control sin margen. Si se comparan los dos tipos de margen, se ha observado un mayor número de semillas de cilantro junto al margen con mezcla de especies florales respecto al margen mono-específico, probablemente debido al mayor número visitas de polinizadores. Puesto que el experimento se realizó en condiciones de campo semi-controladas, esto sugiere que las visitas de polinizadores fueron el factor determinante en los resultados. Por otro lado, los resultados apuntan a que la presencia de un margen floral (ya sea mono-especifico o de mezcla) en cultivos de pequeña escala puede aumentar la producción de cilantro en más de un 200%, al tiempo que contribuyen a la conservación de los polinizadores. ABSTRACT Habitat management, aimed to conserve pollinators in agro-ecosystems, requires selection of the most suitable plant species in terms of their attractiveness to pollinators and simplicity of agronomic management. However, since all flowers are not equally attractive to pollinators and many plant species can be weedy or invasive in the particular habitat, it is important to test which plant species are the most appropriate to be implemented in specific agro-ecosystems. For that reason, this PhD dissertation has been focused on determination of the most appropriate aromatic and herbaceous plants for conservation of pollinators in agro-ecosystems of Central Spain. Therefore, in a first approximation, spatial expansion (i.e. potential weediness) and attractiveness to pollinators of six aromatic perennial plants from the Lamiaceae family, native and frequent in the Mediterranean region, were evaluated. Preliminary plant selection was based on designing a functional mixed margins consisting of plants attractive to pollinators and with different blooming periods, in order to extend the availability of floral resources in the field. After a year of vegetative growth, the next two years the plant species were studied in a randomized block design experiment in order to estimate their attractiveness to pollinators in Central Spain and to investigate whether floral morphology and density affect attractiveness to pollinators. The final aim of the study was to evaluate how their phenology and attractiveness to pollinators can affect the functionality of a flowering mixture of these plants. In addition, the spatial expansion, i.e. potential weediness, of the selected plant species was estimated under field conditions, as the final purpose of the studied plants is to be implemented within agro-ecosystems. The results of the experiment showed that floral morphology did not affect the attractiveness of plants to pollinators, but floral density did, as plant species with higher floral density (i.e. Nepeta tuberosa and Hyssopus officinalis) showed significantly higher attractiveness to pollinators. In addition, of six plant species, two summer species (Melissa officinalis and Thymbra capitata) did not efficiently contribute to the attractiveness of the mixture to pollinators, which reduced its attractiveness during the summer period. Finally, as none of the plants showed weedy behaviour under field conditions, the attractive plant species, i.e. N. tuberosa, H. officinalis and the early spring flowering Salvia verbenaca, showed good potential to conserve the pollinators. Similarly, in a second approximation, the attractiveness to pollinators and agronomic behaviour of twelve herbaceous plants blooming in spring were studied. This experiment was conducted over two years in a randomized block design in order to evaluate attractiveness of preselected plant species to pollinators, as well as their attractiveness efficiency (a combination of duration of flowering and insect visitation), their response to two different agronomic management practices (growing in mixed vs. mono-specific plots; tillage vs. no-tillage), and their potential weediness. The results of this experiment showed that the flowers of Borago officinalis, Echium plantagineum, Phacelia tanacetifolia and Diplotaxis tenuifolia were attractive to bees, while Calendula arvensis, Coriandrum sativum, D. tenuifolia and Lobularia maritima were attractive to hoverflies. In addition, floral mixture resulted in lower attractiveness efficiency to pollinators than mono-specific D. tenuifolia, but higher than most of the mono-specific stands. On the other hand, although some of the most attractive plant species (e.g. P. tanacetifolia and C. arvensis) showed potential weediness, their self-seeding was reduced by tillage. After comparing attractiveness efficiency of various herbaceous species to pollinators and their potential weediness, the results indicated that D. tenuifolia showed the highest attractiveness efficiency to pollinators and efficient self-reproduction, making it highly recommended to attract bees and hoverflies in agro-ecosystems of Central Spain. In addition, this plant, commonly known as wild rocket, has a supplementary economic value as a commercialized crop. The implementation of a new floral margin in agro-ecosystems means increased production costs, especially in regions with frequent and long droughts (as it is Central and South-East area of Iberian Peninsula), where the principal agricultural cost is irrigation. Therefore, before recommending D. tenuifolia for sustainable habitat management within agro-ecosystems, it is necessary to study the effect of drought stress and moderate and severe deficit irrigation on its growth, flower development and attractiveness to pollinators. The results of this experiment showed that in greenhouse conditions, potted D. tenuifolia could be without irrigation for 4 days without affecting its growth, flowering and attractiveness to pollinators. However, lack of irrigation for 8 days or longer significantly reduced the vegetative growth, number of open flowers, total floral area, flower diameter, corolla tube diameter and corolla tube length of D. tenuifolia. This study showed that regulated deficit irrigation can improve water use efficiency, and depending on the purpose of growing D. tenuifolia, as a crop or as a beneficial plant to attract pollinators, it can reduce water consumption by 40% to 70% without affecting its vegetative and floral development and without reducing its attractiveness to pollinators. Finally, the following experiment was developed in order to understand how habitat management can influence on the agricultural production. For this purpose, it was evaluated if the vicinity of mixed and mono-specific field margins, preselected to conserve pollinators within agro-ecosystems, can improve seed production in coriander (C. sativum). The selection of this plant species for the experiment was based on its necessity for insect pollination for production of seeds (even though some pollen can be transmitted from one flower to another by wind) and the fact that under semi-controlled field conditions established in the field it is possible to estimate its total seed production. Since D. tenuifolia is attractive for both bees and hoverflies in Central Spain, the main objective of this experiment was to estimate the impact of two different types of field margins, i.e. mono-specific margin with D. tenuifolia and mixed margin with six herbaceous species, on the seed production of potted coriander. For that reason, it was tested: i) if open pollination (control without proximate field margin and treatments with nearby mono-specific and mixed margin) increases the seed production of coriander when compared with no-pollination (covered inflorescences of coriander) under field conditions; ii) if frequency of pollinator visitation to the flowers of coriander was higher in the presence of field margins than in the control without field margin; and iii) if seed production was higher in the presence of field margins than in control plants of coriander without field margin. The results showed that the proximity of both types of floral margins (mixed and mono-specific) improved the seed quality of coriander plants, as seed weight and germination rate were higher than in control plants without field margin. Furthermore, the number of seeds produced was significantly higher in coriander plants grown near mixed margins than near mono-specific margin, probably due to an increase in pollinator visits. Since the experiment was conducted under semi-controlled field conditions, it can be concluded that pollinator visits was the main factor that biased the results, and that presence of both mixed or mono-specific (D. tenuifolia) margins can improve the production of coriander for more than 200% in small-scale gardens and, in addition, conserve the local pollinators.

Estudio de los factores que condicionan, a escala local, la presencia de Epidendrum rhopalostele (Orchidaceae): Implicaciones para su conservación

El análisis de los factores que determinan el establecimiento y supervivencia de orquídeas epífitas, incluyen: a) las condiciones microambientales de los bosques que las mantienen, b) preferencias por las características de los hospederos donde crecen, c) limitación en la dispersión de semillas, d) interacciones planta-planta, y e) asociaciones micorrízicas para la germinación y resultan esenciales para el desarrollo de estrategias para la conservación y manejo de este grupo de plantas. Este trabajo ha evaluado la importancia de estos factores en Epidendrum rhopalostele, orquídea epífita del bosque de niebla montano, a través de los análisis de los patrones espaciales de los árboles que la portan y de la propia orquídea, a escala de población, estudios de asociación y métodos moleculares. Estos últimos han consistido en el uso de marcadores AFLP para el análisis de la estructura genética de la orquídea y en la secuenciación-clonación de la región ITS para la identificación de los hongos micorrízicos asociados. El objetivo de esta tesis es, por tanto, una mejor comprensión de los factores que condicionan la presencia de orquídeas epífitas en los remanentes de bosque de niebla montano y una evaluación de las implicaciones para la conservación y mantenimiento de sus hábitats y la permanencia de sus poblaciones. El estudio fue realizado en un fragmento de bosque de niebla montano de sucesión secundaria situado al este de la Cordillera Real, en los Andes del sur de Ecuador, a 2250 m.s.n.m y caracterizado por una pendiente marcada, temperatura media anual de 20.8°C y precipitación anual de 2193 mm. En este fragmento se mapearon, identificaron y caracterizaron todos los árboles presentes con DBH > 1 cm y todos los individuos de Epidendrum rhopalostele. Así mismo se tomaron muestras de hoja para obtener ADN de todas las orquídeas registradas y muestras de raíces de individuos con flor de E. rhopalostele, uno por cada forófito, para el análisis filogenético de micorrizas. Análisis espaciales de patrones de puntos basados en la K de Ripley y la distancia al vecino más cercano fueron usados para los árboles, forófitos y la población de E. rhopalostele. Se observó que la distribución espacial de árboles y forófitos de E. rhopalostele no es aleatoria, ya que se ajusta a un proceso agregado de Poisson. De ahí se infiere una limitación en la dispersión de las semillas en el fragmento estudiado y en el establecimiento de la orquídea. El patrón de distribución de la población de E. rhopalostele en el fragmento muestra un agrupamiento a pequeña escala sugiriendo una preferencia por micro-sitios para el establecimiento de la orquídea con un kernel de dispersión de las semillas estimado de 0.4 m. Las características preferentes del micro-sitio como tipos de árboles (Clusia alata y árboles muertos), tolerancia a la sombra, corteza rugosa, distribución en los dos primeros metros sugieren una tendencia a distribuirse en el sotobosque. La existencia de una segregación espacial entre adultos y juveniles sugiere una competencia por recursos limitados condicionada por la preferencia de micro-sitio. La estructura genética de la población de E. rhopalostele analizada a través de Structure y PCoA evidencia la presencia de dos grupos genéticos coexistiendo en el fragmento y en los mismos forófitos, posiblemente por eventos de hibridización entre especies de Epidendrum simpátricas. Los resultados del análisis de autocorrelación espacial efectuados en GenAlex confirman una estructura genético-espacial a pequeña escala que es compatible con un mecanismo de dispersión de semillas a corta distancia ocasionada por gravedad o pequeñas escorrentías, frente a la dispersión a larga distancia promovida por el viento generalmente atribuida a las orquídeas. Para la identificación de los micobiontes se amplificó la región ITS1-5.8S-ITS2, y 47 secuencias fueron usadas para el análisis filogenético basado en neighborjoining, análisis bayesiano y máximum-likelihood que determinó que Epidendrum rhopalostele establece asociaciones micorrízicas con al menos dos especies diferentes de Tulasnella. Se registraron plantas que estaban asociadas con los dos clados de hongos encontrados, sugiriendo ausencia de limitación en la distribución del hongo. Con relación a las implicaciones para la conservación in situ resultado de este trabajo se recomienda la preservación de todo el fragmento de bosque así como de las interacciones existentes (polinizadores, micorrizas) a fin de conservar la diversidad genética de esta orquídea epífita. Si fuere necesaria una reintroducción se deben contemplar distancias entre los individuos en cada forófito dentro de un rango de 0.4 m. Para promover el reclutamiento y regeneración de E. rhopalostele, se recomienda que los forófitos correspondan preferentemente a árboles muertos o caídos y a especies, como Clusia alata, que posean además corteza rugosa, sean tolerantes a la sombra, y en el área del sotobosque con menor luminosidad. Además es conveniente que las orquídeas en su distribución vertical estén ubicadas en los primeros metros. En conclusión, la limitación en la dispersión, las características del micro-sitio, las interacciones intraespecíficas y con especies congenéricas simpátricas y las preferencias micorrízicas condicionan la presencia de esta orquídea epífita en este tipo de bosque. ABSTRACT The analysis of factors that determine the establishment and survival of epiphytic depends on factors such as a) microenvironmental conditions of forest, b) preference for host characteristics where orchids grow, c) seed dispersal limitation, d) plant-plant interaction, e) priority mycorrhizal associations for germination, are essential for the development of strategies for management and conservation. This work evaluated the importance of these factors in Epidendrum rhopalostele, an epiphytic orchid of montane cloud forest through the analysis of spatial patterns of host trees and the orchid, in a more specific scale, with association studies and molecular methods, including AFLPs for orchid population genetic structure and the sequencing of the ITS region for associated mycorrhizal fungi. The aim of this thesis is to understand the factors that condition the presence of epiphytic orchids in the remnants of montane cloud forest and to assess the implications for the conservation and preservation of their habitats and the persistence of the orchid populations. The study was carried out in a fragment of montane cloud forest of secondary succession on the eastern slope of Cordillera Real in the Andes of southern Ecuador, located at 2250 m a.s.l. characterized by a steep slope, mean annual temperature of 20.8°C and annual precipitation of 2193 mm. All trees with DBH > 1 cm were mapped, characterized and identified. All E. rhopalostele individuals present were counted, marked, characterized and mapped. Leaf samples of all orchid individuals were collected for DNA analysis. Root samples of flowering E. rhopalostele individuals were collected for phylogenetic analysis of mycorrhizae, one per phorophyte. Spatial point pattern analysis based on Ripley`s K function and nearest neighbor function was used for trees, phorophytes and orchid population. We observed that spatial distribution of trees and phorophytes is not random, as it adjusts to a Poisson cluster process. This suggests a limitation for seed dispersal in the study fragment that is affecting orchid establishment. Furthermore, the small-scale spatial pattern of E. rhopalostele evidences a clustering that suggests a microsite preference for orchid establishment with a dispersal kernel of 0.4 m. Microsite features such as types of trees (dead trees or Clusia alata), shade tolerance trees, rough bark, distribution in the first meters suggest a tendency to prefer the understory for their establishment. Regarding plant-plant interaction a spatial segregation between adults and juveniles was present suggesting competition for limited resources conditioned for a microsite preference. Analysis of genetic structure of E. rhopalostele population through Structure and PCoA shows two genetic groups coexisting in this fragment and in the same phorophyte, possibly as a result of hybridization between sympatric species of Epidendrum. Our results of spatial autocorrelation analysis develop in GenAlex confirm a small-scale spatial-genetic structure within the genetic groups that is compatible with a short-distance dispersal mechanism caused by gravity or water run-off, instead of the long-distance seed dispersal promoted by wind generally attributed to orchids. For mycobionts identification ITS1-5.8S-ITS2 rDNA region was amplified. Phylogenetic analysis was performed with neighborjoining, Bayesian likelihood and maximum-likelihood for 47 sequences yielded two Tulasnella clades. This orchid establishes mycorrhizal associations with at least two different Tulasnella species. In some cases both fungi clades were present in same root, suggesting no limitation in fungal distribution. Concerning the implications for in situ conservation resulting from this work, the preservation of all forest fragment and their interactions (pollinators, mycorrhiza) is recommended to conserve the genetic diversity of this species. If a reintroduction were necessary, distances between individuals in each phorophyte within a range of 0.4 m, are recommended. To promote recruitment and regeneration of E. rhopalostele it is recommended that phorophytes correspond to dead or fallen trees or species, such as Clusia alata. Trees that have rough bark and are shade tolerant are also recommended. Furthermore, regarding vertical distribution, it is also convenient that orchids are located in the first meter (in understory, area with less light). In conclusion, limitation on seed dispersal, microsite characteristics, plant-plant interactions or interaction with cogeneric sympatric species and mycorrhizal preferences conditioned the presence of this epiphytic orchid in this fragment forest.

Espacios máximos con recursos mínimos : edificio Central Lechera CLESA, Alejandro de la Sota

La tesis aborda el estudio de la Central lechera CLESA, uno de los edificios industriales de Alejandro de la Sota más significativos de la década de los años cincuenta en España. Las centrales lecheras fueron abordadas por Sota en distintas ocasiones entre 1955 y 1969, siendo CLESA la única de todas ellas que llega a construirse. Se trata de uno de los exponentes más brillantes de la arquitectura moderna industrial española de la posguerra, incluido en "La arquitectura de la industria, REGISTRO DOCOMOMO IBÉRICO”1 entre la veintena de edificios seleccionados de la arquitectura madrileña de este periodo. Plantea una solución singular para alcanzar la diafanidad exigida en la implantación del proceso de producción. La estructura de las naves se realiza con hormigón pretensado, siendo uno de los pioneros en la utilización de esta técnica. La hipótesis de partida considera la realidad del proyecto construido como respuesta desde la arquitectura a un programa industrial resuelto con sencillez, que partiendo de una economía de recursos que le es inherente, consigue desde la coherencia del planteamiento, soluciones donde la complejidad espacial constituye una respuesta eficaz y del máximo interés. Los objetivos de esta tesis son contribuir a un conocimiento riguroso del edificio, que permita descubrir la particularidad de su entramado espacial y el interés de las soluciones adoptadas en su configuración final, en aras de contrastar su calidad arquitectónica. El edificio de la Central Lechera CLESA, si bien es un edificio muy conocido, lo es de una manera superficial. Aparece en numerosas publicaciones, en muchas ocasiones formando parte de un relato extenso de la obra de su autor. El libro monográfico publicado en 2007 por la Fundación Alejandro de la Sota, cuya edición está a cargo de Teresa Couceiro, es la única publicación específica sobre él. Tras una breve introducción, en la que se destaca la intensa dedicación de Sota a esta obra, reúne una colección de planos, fotografías y croquis, junto a la memoria del proyecto. Ofrece una visión fragmentada, que permite vislumbrar el interés de esta obra, pero no facilita comprenderla en su integridad. Es importante destacar la publicación de CLESA en el libro editado por Pronaos (1989), que incluye una selección, realizada por el autor, de plantas, alzados y secciones que corresponden al proyecto construido junto a fotografías de la obra terminada, además de un breve texto tan conciso como esclarecedor. Sobre Alejandro de la Sota se han escrito, tesis doctorales, numerosos artículos, varios libros así como realizado exposiciones que recogen su obra global, reflejados en este documento en las consiguientes bibliografías específicas. Cabe destacar la exposición realizada en la sede del COAM en 2014, con ocasión de su centenario, que el edificio CLESA protagoniza en cierto modo, por su riesgo de desaparición.2 La tesis se estructura en cuatro capítulos: descripción, análisis, síntesis y conclusiones. El primer capítulo contempla la descripción del edificio objeto de la tesis, con una introducción que nos sitúa en el contexto histórico, económico, cultural y social en el que se desarrolla el encargo, proyecto y obra de la central lechera. La descripción propiamente dicha del conjunto industrial, partiendo del encargo de la central lechera al autor del proyecto, pasando por el anteproyecto, el proyecto visado y llegando a la obra realizada. Se compara el proyecto visado, la obra terminada y la CLESA publicada, así como el devenir del edificio. La segunda parte corresponde al análisis, en primer lugar desde el programa como planteamiento general, estudiando las circulaciones, relaciones espaciales, geométricas, esqueléticas, geográficas -parte a parte- que integran el conjunto de la central. La estructura, introducción explicativa de las soluciones adoptadas por Alejandro de la Sota; análisis del sistema esquelético del edificio por partes, operaciones geométricas y espaciales. Construcción, análisis de la materialización de la obra, sistemas constructivos empleados en cerramientos, cubiertas, lucernarios; de lo general a lo particular, estudiando los sistemas. Finalmente a través de la pequeña escala se compendian elementos singulares que forman parte de sistemas complejos, como las múltiples escaleras, barandillas, carpinterías, miradores. Se recapitula en una síntesis que configura un todo con la suma de las partes, mediante la utilización de recursos de enlace de esa arquitectura aditiva, como es el módulo, los recorridos y los enlaces visuales. El capítulo final de Conclusiones contrasta la hipótesis de partida de la tesis en cuanto a una arquitectura de espacios máximos con recursos mínimos. Recoge también diversas reflexiones como la dialéctica entre el espacio fragmentado y el espacio único; crecimiento expansivo o inclusivo; imagen singular y representación; escala doméstica y escala industrial; renuncias estructurales o limitaciones de medios. Quizás, el mayor interés de esta tesis reside los dibujos realizados en axonométrica del complejo CLESA, que han permitido restituir y reconstruir idealmente la fábrica al inicio de su actividad. Teniendo en cuenta su posible desaparición total o parcial, esta restitución cobra relevancia como testimonio de lo que fue. ABSTRACT The thesis deals with the study of CLESA's Dairy Plant, one of the most significant industrial buildings of the Decade of the fifties in Spain, by Alejandro de la Sota. The Dairies were addressed by Sota at various occasions between 1955 and 1969, being the CLESA plant the only one that is has been built. This is one of the most brilliant exponents of Spanish industrial post-war modern architecture, included in "The architecture industry, IBERIAN DOCOMOMO RECORD"3 between the score of selected buildings of Madrid architecture of this period. It poses a singular solution to achieve the openness of the space required in the implementation of the manufacturing process. The structure of the nave is done with prestressed concrete, being one of the pioneers in the use of this technique. The initial hypothesis considers the reality of the project built from the architecture in response to an industrial program solved with simplicity, that from a resource economy that is inherent, gets from the consistency of the approach, solutions where the space complexity is an effective response of great interest. The objectives of this thesis are to contribute to a rigorous knowledge of the building, which allows to discover the particularity of its space lattice and the interest of the solutions adopted in its final configuration, in order to contrast its architectural quality. The building of the Central Lechera CLESA, despite it is a well known building, is in a superficial way. It appears in several publications, often as part of an extensive account of the work of its author. The monograph published in 2007 by the Foundation Alejandro de la Sota, whose edition is run by Teresa Couceiro, is the only specific publication about it. After a brief introduction, in which Sota's intense dedication to this work stands out, it brings together a collection of drawings, photographs and sketches, along with the project report. It offers a fragmented view, which enable to glimpse the interest of this work, but not helps to understand it in full. It is important to highlight the publication of CLESA in the book edited by Pronaos (1989), which includes a selection made by the author of plants, elevations and sections corresponding to the project built, next to photographs of the finished construction, in addition to a brief text as concise as enlightening. About Alejandro de la Sota have been written doctoral thesis, numerous articles, several books as well as held exhibitions collecting his global work, which have been reflected in this document in the resulting specific bibliographies. It should be noted the exhibition in COAM headquarters in 2014, on the occasion of its Centennial, where the building CLESA has a leading role, in a certain way, because of its risk of disappearance.4 The thesis is structured in four chapters: description, analysis, synthesis, and conclusions. The first chapter provides the description of the building object of this thesis. Includes an introduction that puts us in the historic, economic, cultural and social context in which it is developed the commission, the project and construction of the dairy building. The description itself of the industrial complex, starts with the order of the dairy to the author of the project, moves through the draft, the visa project and reaches the completion of the work. The visa project, CLESA's finished and published work, as well as the future of the building is compared. The second part corresponds to the analysis, first from the program as a general approach, studying the circulations, geometric, spatial, skeletal, geographical relations - bit by bit - comprising the manufacturing plant ("la central"). The structure, explanatory introduction of the solutions adopted by Alejandro de la Sota; analysis of the skeletal system of the building by parts, geometric and spatial operations. Construction, analysis of the realization of the work, constructive systems used in the building enclosures, roofs, skylights; from the general to the particular and studying the systems. Finally through small scale unique elements that are part of complex systems, such as multiple stairs, railings, carpentry, viewpoints are summarized. It is recapitulated in a synthesis which forms a whole with the sum of the parts, using linking resources that belongs to the additive architecture, such as the module, tours and visual links The final chapter of Conclusions contrast the hypothesis of the thesis regarding the maximum space architecture with minimal resources. It also includes various reflections as the dialectic between the fragmented space and the single space; expansive or inclusive growth; unique image and representation; domestic and industrial scale; structural abandonment or limitation of means. Perhaps the greatest interest of this thesis lies in the axonometric drawings made of the CLESA complex, which ideally have allowed to restore and rebuild the factory back to the beginning of its activity. Considering its potential full or partial disappearance, such recovery becomes relevant as a testimonial evidence of what it was.

Small hydroelectric power demonstration projects /

"Program opportunity notice (PON) number DE-PN-07-79-ID-12043."

Patch dynamics in grazed subtropical native pastures in south-east Queensland

Patch formation is common in grazed grasslands but the mechanisms involved in the formation and maintenance of patches are not clear. To increase our knowledge on this subject we examined possible reasons for patch formation and the influence of management on changes between patch states in three experiments in native pasture communities in the Crows Nest district, south-east Queensland. In these communities, small-scale patches (tall grassland (dominated by large and medium tussock grasses), short swards (dominated by short tussock grasses and sedges), and lawns (dominated by stoloniferous and/or rhizomatous grasses)) are readily apparent. We hypothesized that the formation of short sward and lawn patches in areas of tall grassland was due to combinations of grazing and soil fertility effects. This was tested in Experiment 1 by applying a factorial combination of defoliation, nutrient application and transplants of short tussock and stoloniferous species to a uniform area of tall grassland. Total species density declined during the experiment, was lower with high nutrient applications, but was not affected by defoliation. There were significant changes in abundance of species that provided support for our hypotheses. With light defoliation and low nutrients, the tall grassland remained dominated by large tussock grasses and contained considerable amounts of forbs. With heavy defoliation, the pastures were dominated by medium tussock grasses and there were significant decreases in forbs and increases in sedges (mainly with low nutrients) and stoloniferous grasses (mainly with high nutrients). Total germinable seed densities and those of most species groups were significantly lower in the heavy defoliation than the light defoliation plots. Total soil seed numbers were not affected by nutrient application but there were fewer seeds of the erect forbs and more sedge seeds in plots with high nutrients. The use of resting from grazing and fire to manage transitions between patches was tested. In Experiment 2, changes in species density and abundance were measured for 5 years in the three patch types with and without grazing. Experiment 3 examined the effects of fire, grazing and resting on short sward patches over 4 years. In Experiment 2, total species density was lower in lawn than short sward or tall grassland patches, and there were more species of erect forbs than other plant groups in all patch types. The lawn patches were originally dominated by Cynodon spp. This dominance continued with grazing but in ungrazed patches the abundance of Cynodon spp. declined and that of forbs increased. In the short sward patches, dominance of short tussock grasses continued with grazing but in ungrazed plots their abundance declined while that of large tussock grasses increased. The tall grassland patches remained dominated by large and medium tussock species. In Experiment 3, fire had no effect on species abundance. On the grazed plots the short tussock grasses remained dominant but where the plots were rested from grazing the small tussock grasses declined and the large tussock grasses increased in abundance. The slow and relatively small changes in these experiments over 4 or 5 years showed how stable the composition of these pastures is, and that rapid changes between patch types are unlikely.

Modelling comminution patterns within a pilot scale AG/SAG mill

The patterns of rock comminution within tumbling mills, as well as the nature of forces, are of significant practical importance. Discrete element modelling (DEM) has been used to analyse the pattern of specific energy applied to rock, in terms of spatial distribution within a pilot AG/SAG mill. We also analysed in some detail the nature of the forces, which may result in rock comminution. In order to examine the distribution of energy applied within the mill, the DEM models were compared with measured particle mass losses, in small scale AG and SAG mill experiments. The intensity of contact stresses was estimated using the Hertz theory of elastic contacts. The results indicate that in the case of the AG mill, the highest intensity stresses and strains are likely to occur deep within the charge, and close to the base. This effect is probably more pronounced for large AG mills. In the SAG mill case, the impacts of the steel balls on the surface of the charge are likely to be the most potent. In both cases, the spatial pattern of medium-to-high energy collisions is affected by the rotational speed of the mill. Based on an assumed damage threshold for rock, in terms of specific energy introduced per single collision, the spatial pattern of productive collisions within each charge was estimated and compared with rates of mass loss. We also investigated the nature of the comminution process within AG vs. SAG mill, in order to explain the observed differences in energy utilisation efficiency, between two types of milling. All experiments were performed using a laboratory scale mill of 1.19 m diameter and 0.31 m length, equipped with 14 square section lifters of height 40 mm. (C) 2006 Elsevier Ltd. All rights reserved.

Regional-scale, fully coupled modelling of stream-aquifer interaction in a tropical catchment

The planning and management of water resources in the Pioneer Valley, north-eastern Australia requires a tool for assessing the impact of groundwater and stream abstractions on water supply reliabilities and environmental flows in Sandy Creek (the main surface water system studied). Consequently, a fully coupled stream-aquifer model has been constructed using the code MODHMS, calibrated to near-stream observations of watertable behaviour and multiple components of gauged stream flow. This model has been tested using other methods of estimation, including stream depletion analysis and radon isotope tracer sampling. The coarseness of spatial discretisation, which is required for practical reasons of computational efficiency, limits the model's capacity to simulate small-scale processes (e.g., near-stream groundwater pumping, bank storage effects), and alternative approaches are required to complement the model's range of applicability. Model predictions of groundwater influx to Sandy Creek are compared with baseflow estimates from three different hydrograph separation techniques, which were found to be unable to reflect the dynamics of Sandy Creek stream-aquifer interactions. The model was also used to infer changes in the water balance of the system caused by historical land use change. This led to constraints on the recharge distribution which can be implemented to improve model calibration performance. (c) 2006 Elsevier B.V. All rights reserved.

The importance of considering social issues in reforestation schemes

This paper reports the results of a survey of north Queensland landholder attitudes with respect to a number of issues relating to participation in forestry. The survey explored the reasons why landholders plant trees, perceived obstacles to greater farm forestry, and attitudes to tree planting programs such as the Community Rainforest Reforestation Program (CRRP) and Private Joint Venture Scheme (PJVS). The results of the survey are discussed in the context of possible policy prescriptions that can be made at local, state and federal government levels to facilitate greater tree planting in the region. Many of the problems faced by local landholders are shared by landholders in other parts of Australia and throughout the world. This survey can thus serve as a case study, providing information on a number of issues concerning small-scale forestry policies that are of general relevance to the development of farm forestry programs.

Chemical kinetic investigation of a commercial batch reactor process

The aim of this investigation was to study the chemical reactions occurring during the batchwise production of a butylated melamine-formaldehyde resin, in order to optimise the efficiency and economics of the batch processes. The batch process models are largely empirical in nature as the reaction mechanism is unknown. The process chemistry and the commercial manufacturing method are described. A small scale system was established in glass and the ability to produce laboratory resins with the required quality was demonstrated, simulating the full scale plant. During further experiments the chemical reactions of methylolation, condensation and butylation were studied. The important process stages were identified and studied separately. The effects of variation of certain process parameters on the chemical reactions were also studied. A published model of methylolation was modified and used to simulate the methylolation stage. A major result of this project was the development of an indirect method for studying the condensation and butylation reactions occurring during the dehydration and acid reaction stages, as direct quantitative methods were not available. A mass balance method was devised for this purpose and used to collect experimental data. The reaction scheme was verified using this data. The reactions stages were simulated using an empirical model. This has revealed new information regarding the mechanism and kinetics of the reactions. Laboratory results were shown to be comparable with plant scale results. This work has improved the understanding of the batch process, which can be used to improve product consistency. Future work has been identified and recommended to produce an optimum process and plant design to reduce the batch time.

Using biomass-based fuels including pyrolysis liquids for power and CHP production

The use of biomass-derived liquids (in short: bioliquids) instead of solid biomass can help overcome some of the barriers hindering a wider use of biomass in smaller-scale CHP systems. Relevant bioliquids included biodiesel, vegetable oils as well straight and upgraded pyrolysis oil. In this joint EU-Russian research project Bioliquids-CHP prime movers (engines and turbines) will be developed and modified so that these can run efficiently on bioliquids. At the same time, bioliquids will be upgraded and blended in order to facilitate their use in prime movers. Preliminary results with regard to bioliquid selection, production, and characterisation; the selection and modification of a micro gas turbine; and the development of engines and components are discussed. The research also covers NOx emission reduction and control and an assessment of the benefits and economics of bioliquids-based CHP systems in EU and Russian markets.

A new strategy for selecting and evaluating physical solvents for gas absorption

This work describes how the physical properties of a solvent affect the design variables of a physical gas absorption process. The role of every property in determining the capital and the running cost of a process has been specified. Direct mathematical relationships have been formulated between every item of capital or running cost and the properties which are related to that item. The accuracy of the equations formulated has been checked by comparing their outcome with some actual design data. A good agreement has been found. The equations formulated may be used to evaluate on the basis of economics any suggested new solvents. A group of solvents were selected for evaluation. Their physical properties were estimated or collected as experimental data. The selected ones include three important solvents, the first is polyethylene glycol dimethyl ether (Selexol) which represents the currently most successful one, The other two solvents are acetonyl acetone (B2) and n-formyl morpholine which have been suggested previously as potential credible alternatives to the current ones. The important characteristics of: acetonyl acetone are its high solubility and its low viscosity, while the n-formyl morpholine is characterised by its low vapour pressure and its high selectivity. It was found that acetonyl acetone (B2) is the most attractive solvent for commercial applications particularly for process configurations that:include heat exchangers and strippers. The effect of the process configuration on the selected solvent was investigated in detail and it was found that there is no universal solvent which is the best for any process configuration, but that there is a best solvent for a given process configuration. In previous work, acetonyl acetone was suggested as a commercially promising physical solvent. That suggestion was not fully based on experimental measurement of all the physical properties. The viscosity of acetonyl acetone and its solubility at 1 atm were measured but the vapour pressure and the solubility of C02 and CH4 at high pressure were predicted. In this work, the solubilities of C02, CH4 and C3H8 in acetenyl acetone were measured for a partial pressure range of (2 ~ 22) bar at 25°C, The vapour pressure of this solvent was also measured, and the Antoine equation was formulated from tbe experimental data. The experimental data were found to be not In agreement with the predicted ones, so acetonyl acetone was re-evaluated according to the experimental data. It was found that this solvent can be recommended for further trials in a pilot plant study or for small scale commercial units.

Brush plating of bearing alloys on aluminium alloy shells

The turbocharging of diesel engines has led to increase in temperature, load and corrosive attack of plain bearings. To meet these requirements, overlay plated aluminium alloys are now preferred. Currently, lead-tin alloys are deposited using a zincate layer and nickel strike, as intermediate stages in the process. The nickel has undesirable seizure characteristics and the zincate can given rise to corrosion problems. Consequently, brush plating allows the possible elimination of these stages and a decrease in process together with greater automation. The effect of mode application, on the formation of zincate films, using film growth weight measurements, potential-time studies, peel adhesion testing and Scanning Electron Microscopy was studied, for both SIC and AS15 aluminium alloys. The direct plating of aluminium was also successfully achieved. The results obtained indicate that generally, although lower adhesion resulted when a brush technique was used, satisfactory adhesion for fatigue testing was achieved. Both lead-tin and tin-cobalt overlays were examined and a study of the parameters governing brush plating were carried out using various electrolytes. An experimentally developed small scale rig, was used to produce overlay plated bearings that were fatigue tested until failure. The bearings were then examined and an analysis of the failure mechanisms undertaken. The results indicated that both alloy systems are of the regular codeposition type. Tin-cobalt overlays were superior to conventional lead-tin overlays and remained in good condition, although the lining (substrate) failed. Brush plated lead-tin was unsatisfactory. Sufficient understanding has now been gained, to enable a larger scale automated plant to be produced. This will allow a further study of the technique to be carried out, on equipment that more closely resembles that of a full scale production process.

An investigation of the retail marketing mix and its effectiveness in small shops

The recent history of small shop and independent retailing has been one of decline. The most desirable form of assistance is the provision of information which will increase the efficiency model of marketing mix effeciveness which may be applied in small scale retailing. A further aim is to enhance theoretical development in the marketing field. Recent changes in retailing have affected location, product range, pricing and promotion practices. Although a large number of variables representing aspects of the marketing mix may be identified, it is not possible, on the basis of currently available information, to quantify or rank them according to their effect on sales performance. In designing a suitable study a major issue is that of access to a suitable representative sample of small retailers. The publish nature of the retail activities involved facilitates the use of a novel observation approach to data collection. A cross-sectional survey research design was used focussing on a clustered random sample of greengrocers and gent's fashion outfitters in the West Midlands. Linear multiple regression was the main analytical technique. Powerful regression models were evolved for both types of retailing. For greengrocers the major influences on trade are pedestrian traffic and shelf display space. For gent's outfitters they are centrality-to-other shopping, advertising and shelf display space. The models may be utilised by retailers to determine the relative strength of marketing mix variables. The level of precision is not sufficient to permit cost benefit analysis. Comparison of the findings for the two distinct kinds of business studied suggests an overall model of marketing mix effectiveness might be based on frequency of purchase, homogeneity of the shopping environment, elasticity of demand and bulk characteristics of the good sold by a shop.

Drying of biomass for second generation synfuel production

Drying is a major and challenging step in the pre-treatment of biomass for production of second generation synfuels for transport. The biomass feedstocks are mostly wet and need to be dried from 30 to 60 wt% moisture content to about 10-15 wt%. The present survey aims to define and evaluate a few of the most promising optimised concepts for biomass pre-treatment scheme in the production of second generation synfuels for transport. The most promising commercially available drying processes were reviewed, focusing on the applications, operational factors and emissions of dryers. The most common dryers applied now for biomass in bio-energy plants are direct rotary dryers, but the use of steam drying techniques is increasing. Steam drying systems enable the integration of the dryer to existing energy sources. In addition to integration, emissions and fire or explosion risks have to be considered when selecting a dryer for the plant. In steam drying there will be no gaseous emissions, but the aqueous effluents need often treatment. Concepts for biomass pre-treatment were defined for two different cases including a large-scale wood-based gasification synfuel production and a small-scale pyrolysis process based on wood chips and miscanthus bundles. For the first case a pneumatic conveying steam dryer was suggested. In the second case the flue gas will be used as drying medium in a direct or indirect rotary dryer.