Shear strengthening of reinforced concrete beams with SHCC-FRP panels

Tese de Doutoramento em Engenharia Civil

In vitro mechanical fatigue behavior of poly-ε-caprolactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel

Polymeric scaffolds used in regenerative therapies are implanted in the damaged tissue and subjected to repeated loading cycles. In the case of articular cartilage engineering, an implanted scaffold is typically subjected to long term dynamic compression. The evolution of the mechanical properties of the scaffold during bioresorption has been deeply studied in the past, but the possibility of failure due to mechanical fatigue has not been properly addressed. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. In this work fatigue studies of polycaprolactone scaffolds were carried by subjecting the scaffold to repeated compression cycles in conditions simulating the scaffold implanted in the articular cartilage. The behaviour of the polycaprolactone sponge with the pores filled with a poly(vinyl alcohol) gel simulating the new formed tissue within the pores was compared with that of the material immersed in water. Results were analyzed with Morrow’s criteria for failure and accurate fittings are obtained just up to 200 loading cycles. It is also shown that the presence of poly(vinyl alcohol) increases the elastic modulus of the scaffolds, the effect being more pronounced with increasing the number of freeze/thawing cycles.

Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings

This paper proposes a methodology for improvement of energy efficiency in buildings through the innovative simultaneous incorporation of three distinct phase change materials (here termed as hybrid PCM) in plastering mortars for façade walls. The thermal performance of a hybrid PCM mortar was experimentally evaluated by comparing the behaviour of a prototype test cell (including hybrid PCM plastering mortar) subjected to realistic daily temperature profiles, with the behaviour of a similar prototype test cell, in which no PCM was added. A numerical simulation model was employed (using ANSYS-FLUENT) to validate the capacity of simulating temperature evolution within the prototype containing hybrid PCM, as well as to understand the contribution of hybrid PCM to energy efficiency. Incorporation of hybrid PCM into plastering mortars was found to have the potential to significantly reduce heating/cooling temperature demands for maintaining the interior temperature within comfort levels when compared to normal mortars (without PCM), or even mortars comprising a single type of PCM.

The influence of the Palestinian sociocultural values in shaping the vernacular architecture of Nablus city

Recently, environmental architecture and sustainable construction has been ranked on top of the worldâ s interests. Making use of natural resources helps in reducing energy consumption and costs associated with the operation of buildings. The current architectural approaches and designs in Palestine are far away from environmental concepts, copying and simulating abroad approaches, without taking into account the culture, climate, and inhabitant's needs. On the contrast, vernacular architecture has achieved environmental concepts and has given suitable approaches and samples - without any need to simulate or copy - which come from people and land. This paper discusses how the Palestinian socio-cultural context shaped the residential vernacular architecture in Palestine, taking the old city of Nablus as a case-study. The research concept depends on analysing and trying to understand the effect of the socio-cultural context on vernacular architecture and trying to reach some rules or understandings of how it works in order to reach a modern environmental dwelling that is suitable to this concept. The research method goes through analysing study cases from the traditional architecture models and the Nablus city is selected as a case study. This analytical and qualitative method can lead to deep understanding for how to benefit from vernacular architecture in Palestine in finding the future environmental residential construction. One of the main findings of this research is to set general and special rules for building sustainable buildings in Palestine from the socio-cultural point view, in order to be a reference for designers, stakeholders, ministry of planning, and municipalities.

Development of advanced cell/tissue culture systems, based on enhanced polymeric scaffolds and sophisticated bioreactors, for tissue engineering applications

Programa Doutoral em Engenharia Biomédica

In vitro digestion and stability assessment of b-lactoglobulin/riboflavin nanostructures

B-Lactoglobulin (b-Lg) is the major protein fraction of bovine whey serum and a primary gelling agent. b-Lg has a high nutritional value, is stable at low pH being highly resistant to proteolytic degradation in the stomach, besides, it has the ability of acting as an encapsulating agent. This study aims at assessing the ability of b-Lg nanostructures to associate a nutraceutical - i.e. riboflavin - and release it in a controlled manner throughout an in vitro gastrointestinal (GI) system. For this reason b-Lg nanostructures loaded with riboflavin were critically characterized in terms of their morphology (i.e. size, polydispersity, -potential and shape) by dynamic light scattering (DLS) and transmission electron microscopy (TEM), and efficiency to associate to riboflavin through spectrofluorimetry. Furthermore, these nanocomplexes were evaluated in an in vitro GI model, simulating the physiological conditions. Stable b-Lg nanostructures were obtained at pH 6, of spherical shape, characterized by particle size of 172±1 nm, low polydispersity (i.e. PDI of 0.06±0.02), -potential of -32±3 mV and association efficiency (AE) of 26±1 %. b-Lg nanostructures showed to be stable upon their passage throughout stomach (i.e. particle size, PDI and potential of 248±10 nm, 0.18±0.03 and 18±3 mV, respectively). Concerning their passage throughout the intestine, such nanostructures were mostly degraded in the duodenum. Regarding riboflavin, a release of about 11 % was observed after their passage through stomach, while 35 %, 38 % and 5 % were the released percentages of the total riboflavin associated observed after passage through duodenum, jejunum and ileum, respectively. Hence,b-Lg nanostructures showed to be suitable carriers for riboflavin until the intestine, where their degradation occurs. b-Lg also showed to be structurally stable, under food simulant conditions (yoghurt simulant, composed of 3 % acetic acid), over 14 days, with a protective effect upon riboflavin activity, releasing it in a 7 day period.

Introduction [to Contact force models for multibody dynamics]

"Series: Solid mechanics and its applications, vol. 226"

Giving SBML support to ByoDyn

Report for the scientific stay at the California Institute of Technology during the summer of 2005. ByoDyn is a tool for simulating the dynamical expression of gene regulatory networks (GRNs) and for parameter estimation in uni- and multicellular models. A software support was carried out describing GRNs in the Systems Biology Markup Language (SBML). This one is a computer format for representing and storing computational models of biochemical pathways in software tools and databases. Supporting this format gives ByoDyn a wide range of possibilities to study the dynamical properties of multiple regulatory pathways.

Beyond Intermediates: The Role of Consumption and Commuting in the Construction of Local Input-Output Tables

It is a well-established fact in the literature on simulating Input-Output tables that mechanical methods for estimating intermediate trade lead to biased results where cross-hauling is underestimated and Type-I multipliers are overstated. Repeated findings to this effect have led to a primary emphasis on advocating the accurate estimation of intermediate trade flows. This paper reviews previous research and argues for a qualification of the consensus view: When simulating IO tables, construction approaches need to consider spill-over effects driven by wage and consumption flows. In particular, for the case of metropolitan economies, wage and consumption flows are important if accurate Type-II multipliers are to be obtained. This is demonstrated by constructing an interregional Input-Output table, which captures interdependencies between a city and its commuter belt, nested within the wider regional economy. In addition to identifying interdependencies caused by interregional intermediate purchases, data on subregional household incomes and commuter flows are used to identify interdependencies from wage payments and household consumption. The construction of the table is varied around a range of assumptions on intermediate trade and household consumption to capture the sensitivity of multipliers.

Adéu, Guau!

Treball de recerca realitzat per alumnes d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. Aquest treball és una creació d’un projecte empresarial, per tal d’analitzar la viabilitat, examinar els objectius i descobrir els inconvenients de la creació d’una empresa. En aquest cas es tracta de crear un cementiri i vetlla d’animals de tot tipus, simulant el comiat que es realitza a les persones estimades, però destinat a les nostres mascotes, amb un servei de qualitat, serietat, responsabilitat i adequat als usuaris i clients. Es tracta d’una empresa que s’encarregarà de la recollida de l’animal, l’acondicionament per a la vetlla, la cerimònia de comiat, la impressió dels panegírics, l’obtenció d’objectes per recordar-ho, les decoracions florals o similars, la venta de plaquetes, tombes, gerros... segons el tipus de mètode seleccionat per a l’enterrament, així com la prestació d altres serveis addicionals que s’adaptin a les necessitats específiques dels usuaris/clients per tal de cobrir la demanda actual al sector. Es tracta d’una iniciativa destinada a les persones que necessiten desprendre s de les restes de les seves mascotes, després de la seva defunció, que volen oferir un comiat proper i afectuós a les seves mascotes.

Online estimation of respiratory mechanics in non-invasive pressure support ventilation: a bench model study.

An online algorithm for determining respiratory mechanics in patients using non-invasive ventilation (NIV) in pressure support mode was developed and embedded in a ventilator system. Based on multiple linear regression (MLR) of respiratory data, the algorithm was tested on a patient bench model under conditions with and without leak and simulating a variety of mechanics. Bland-Altman analysis indicates reliable measures of compliance across the clinical range of interest (± 11-18% limits of agreement). Resistance measures showed large quantitative errors (30-50%), however, it was still possible to qualitatively distinguish between normal and obstructive resistances. This outcome provides clinically significant information for ventilator titration and patient management.

Agent based simulation to optimise emergency departments

Nowadays, many of the health care systems are large and complex environments and quite dynamic, specifically Emergency Departments, EDs. It is opened and working 24 hours per day throughout the year with limited resources, whereas it is overcrowded. Thus, is mandatory to simulate EDs to improve qualitatively and quantitatively their performance. This improvement can be achieved modelling and simulating EDs using Agent-Based Model, ABM and optimising many different staff scenarios. This work optimises the staff configuration of an ED. In order to do optimisation, objective functions to minimise or maximise have to be set. One of those objective functions is to find the best or optimum staff configuration that minimise patient waiting time. The staff configuration comprises: doctors, triage nurses, and admissions, the amount and sort of them. Staff configuration is a combinatorial problem, that can take a lot of time to be solved. HPC is used to run the experiments, and encouraging results were obtained. However, even with the basic ED used in this work the search space is very large, thus, when the problem size increases, it is going to need more resources of processing in order to obtain results in an acceptable time.

Estudi òptic dels minerals

El Grup Consolidat d’Innovació Docent de Mineralogia i òptica cristal·lina de la Universitat de Barcelona ha desenvolupat un CD interactiu que simula el funcionament d’un microscopi petrogràfic, per tal de facilitar a l’alumne un material d’autoaprenentatge, ha de servir per a reforçar els coneixements dels minerals formadors de roques en làmina prima. Aquest material te tres entrades diferents, en català, castellà i anglès. Cada mineral té una fitxa general amb les seves propietats òptiques i una complementaria amb les característiques cristal·logràfiques, camp d’estabilitat, diagrames de fases i característiques morfològiques del mineral a observar, les quals marquen els trets determinatius d’aquell mineral per tal de facilitar el seu reconeixement. Per tal de complementar les dades s’han introduït links directes amb la planes web: “webmineral” i “mindat” on hi ha les corresponents estructures i morfologies “interactives” de cadascun dels minerals que apareixen en el programa. En l’aplicació informàtica hi ha 169 filmacions corresponents a 43 dels principals minerals que formen les roques, una filmació correspon a la imatge només amb el polaritzador, i l'altre a la imatge amb el polaritzador més l'analitzador. Cadascuna d'aquestes imatges es presenta amb un gir de 360º; es pot aturar i després continuar girant, simulant el que veuríem al microscopi. D'aquesta manera es pot determinar el pleocroisme, la presència de macles, el color d'interferència i l'angle d'extinció.. S’ha intentat sempre que hi hagués diferents exemples d’un mateix mineral en diverses paragènesis. També s'incorpora una fitxa que l'usuari pot omplir amb les característiques texturals i òptiques del mineral agrupades segons les observacions que es fan, bé amb el polaritzador, amb el polaritzador i l'analitzador o bé amb les condicions específiques per veure la figura d'interferència i el signe òptic. Aquesta fitxa, un cop plena, es pot imprimir. En tot moment hi ha un menú d’ajuda on l’usuari pot remetre i fer la consulta adient per poder continuar.

Patient-ventilator asynchrony during noninvasive ventilation: a bench and clinical study.

BACKGROUND: Different kinds of ventilators are available to perform noninvasive ventilation (NIV) in ICUs. Which type allows the best patient-ventilator synchrony is unknown. The objective was to compare patient-ventilator synchrony during NIV between ICU, transport-both with and without the NIV algorithm engaged-and dedicated NIV ventilators. METHODS: First, a bench model simulating spontaneous breathing efforts was used to assess the respective impact of inspiratory and expiratory leaks on cycling and triggering functions in 19 ventilators. Second, a clinical study evaluated the incidence of patient-ventilator asynchronies in 15 patients during three randomized, consecutive, 20-min periods of NIV using an ICU ventilator with and without its NIV algorithm engaged and a dedicated NIV ventilator. Patient-ventilator asynchrony was assessed using flow, airway pressure, and respiratory muscles surface electromyogram recordings. RESULTS: On the bench, frequent auto-triggering and delayed cycling occurred in the presence of leaks using ICU and transport ventilators. NIV algorithms unevenly minimized these asynchronies, whereas no asynchrony was observed with the dedicated NIV ventilators in all except one. These results were reproduced during the clinical study: The asynchrony index was significantly lower with a dedicated NIV ventilator than with ICU ventilators without or with their NIV algorithm engaged (0.5% [0.4%-1.2%] vs 3.7% [1.4%-10.3%] and 2.0% [1.5%-6.6%], P < .01), especially because of less auto-triggering. CONCLUSIONS: Dedicated NIV ventilators allow better patient-ventilator synchrony than ICU and transport ventilators, even with their NIV algorithm. However, the NIV algorithm improves, at least slightly and with a wide variation among ventilators, triggering and/or cycling off synchronization.