Life Cycle Thinking for sustainability assessment and decision-making in selected food supply chains in Costa Rica

The Agenda 2030 contains 17 integrated Sustainable Development Goals (SDGs). SDG 12 for Sustainable Consumption and Production (SCP) promotes the efficient use of resources through a systemic change that decouples economic growth from environmental degradation. The Food Systems (FS) pillar in SDG 12 entails paramount relevance due to its interconnection to many other SDGs, and even when being a crucial world food supplier, the Latin American and Caribbean (LAC) Region struggles with environmental and social externalities, low investment in agriculture, inequity, food insecurity, poverty, and migration. Life Cycle Thinking (LCT) was regarded as a pertinent approach to identify hotspots and trade-offs, and support decision-making process to aid LAC Region countries as Costa Rica to diagnose sustainability and overcome certain challenges. This thesis aimed to ‘evaluate the sustainability of selected products from food supply chains in Costa Rica, to provide inputs for further sustainable decision-making, through the application of Life Cycle Thinking’. To do this, Life Cycle Assessment (LCA), Life Cycle Costing (LCC), and Social Life Cycle Assessment (S-LCA) evaluated the sustainability of food-waste-to-energy alternatives, and the production of green coffee, raw milk and leafy vegetables, and identified environmental, social and cost hotspots. This approach also proved to be a useful component of decision-making and policy-making processes together with other methods. LCT scientific literature led by LAC or Costa Rican researchers is still scarce; therefore, this research contributed to improve capacities in the use of LCT in this context, while offering potential replicability of the developed frameworks in similar cases. Main limitations related to the representativeness and availability of primary data; however, future research and extension activities are foreseen to increase local data availability, capacity building, and the discussion of potential integration through Life Cycle Sustainability Assessment (LCSA).

Utilizzo della metodologia Life Cycle Assessment combinata al modello RothC per valutare gli impatti ambientali in aziende vitivinicole a diverso regime di conduzione

A causa del riscaldamento globale, tutti i settori produttivi sono incentivati ad attuare strategie e tecnologie volte a ridurre le emissioni climalteranti. Per il settore agricolo, una gestione più sostenibile del suolo permetterebbe di rimuovere CO2 dall’atmosfera, stoccandola come C organico nel suolo. Il presente studio si pone l’obiettivo di quantificare gli impatti della produzione dell’uva e del vino imbottigliato dal punto di vista degli aspetti ambientali più rilevanti, approfondendo particolarmente il cambiamento climatico attraverso la metodologia Life Cycle Assessment (LCA). Inoltre, attraverso la determinazione delle dinamiche del C organico nel suolo mediante il modello RothC, lo studio cerca di capire se l'integrazione dei risultati di uno studio LCA con quelli del modello RothC possano fornire informazioni aggiuntive utili a un miglioramento della performance ambientale del prodotto agricolo. Il caso studio riguarda due aziende vitivinicole, situate in Emilia-Romagna che attuano due diverse tipologie di gestione (naturale e convenzionale). La metodologia LCA è stata applicata ad entrambi gli scenari selezionando i parametri metodologici più appropriati a seconda dello scenario in esame, e.g. i confini del sistema e l’unità funzionale, mentre, il modello RothC è stato applicato unicamente alla fase di coltivazione dell’uva. I risultati LCA mostrano le migliori prestazioni per la produzione dell’uva dell’azienda naturale per quasi tutte le categorie d’impatto, incluso il cambiamento climatico. Nella produzione del vino imbottigliato, la fase di coltivazione e quella di imbottigliamento risultano le più impattanti. I risultati di RothC evidenziano invece migliori prestazioni da parte dell’azienda convenzionale. L’integrazione dei risultati LCA con quelli di RothC rappresentano dunque un’operazione cruciale nel determinare quale sia l’effettivo impatto delle aziende agricole sul cambiamento climatico e come migliorarlo in futuro.

Uso combinato della metodologia Life Cycle Assessment e del modello RothC per stimare le prestazioni ambientali della produzione di uva in due aziende a conduzione convenzionale

Lo studio ha applicato la metodologia Life Cycle Assessment (LCA) con l’obiettivo di valutare i potenziali impatti ambientali derivanti dalla coltivazione dell’uva in due aziende a conduzione convenzionale del ravennate, denominate DZ e NG. Successivamente è stato applicato il modello RothC per simulare scenari sulla variazione del Soil Organic Carbon (SOC) e valutare in che misura le diverse pratiche agronomiche di gestione del suolo influenzino la variazione del SOC e la relativa emissione di CO2. Infine, i risultati dell’LCA sono stati integrati con quelli del modello RothC. Gli esiti dell’LCA indicano che, generalmente, sui diversi aspetti ambientali l’azienda DZ ha impatti superiori a quelli di NG soprattutto a causa di un maggiore utilizzo di fertilizzanti e pesticidi. Per quanto riguarda il contributo al riscaldamento globale (GWP), DZ mostra un impatto circa doppio di quello di NG. Il modello RothC ha individuato quali pratiche culturali aumentano il SOC mitigando le emissioni di CO2eq., in particolare: l’inerbimento perenne, la scelta di forme di allevamento con elevata produzione di residui culturali e l’utilizzo di ammendanti. L’integrazione dei valori dei due strumenti ha permesso di ottenere un bilancio globale di CO2eq. in cui le emissioni totali rispetto al GWP aumentano in DZ e diminuiscono in NG, portando a un impatto di DZ circa tre volte superiore rispetto a quello di NG. Fertilizzazione, potatura e lavorazione del suolo sono pratiche considerate nel calcolo del GWP in termini di consumo ed emissione dei processi produttivi, ma non come input di carbonio fornibili al suolo, determinando sovra o sottostima delle effettive emissioni di CO2eq. Questo studio dimostra l’utilità di incentivare la diffusione dell’applicazione integrata dei due strumenti nel settore viticolo, determinante per la comprensione e quantificazione delle emissioni di CO2 associate alla fase di coltivazione, sulla quale quindi indirizzare ottimizzazioni e approfondimenti.

Towards the sustainable production of methyl methacrylate: A comparative analysis of industrial chemical production processes using life cycle assessment methodology

Increasing environmental awareness has been a significant driving force for innovations and process improvements in different sectors and the field of chemistry is not an outlier. Innovating around industrial chemical processes in line with current environmental responsibilities is however no mean feat. One of such hard to overhaul process is the production of methyl methacrylate (MMA) commonly produced via the acetone cyanohydrin (ACH) process developed back in the 1930s. Different alternatives to the ACH process have emerged over the years and the Alpha Lucite process has been particularly promising with a combined plant capacity of 370,000 metric tonnes in Singapore and Saudi Arabia. This study applied Life Cycle Assessment methodology to conduct a comparative analysis between the ACH and Lucite processes with the aim of ascertaining the effect of applying principles of green chemistry as a process improvement tool on overall environmental impacts. A further comparison was made between the Lucite process and a lab-scale process that is further improvement on the former, also based on green chemistry principles. Results showed that the Lucite process has higher impacts on resource scarcity and ecosystem health whereas the ACH process has higher impacts on human health. On the other hand, compared to the Lucite process the lab-scale process has higher impacts in both the ecosystem and human health categories with lower impacts only in the resource scarcity category. It was observed that the benefits of process improvements with green chemistry principles might not be apparent in some categories due to some limitations of the methodology. Process contribution analysis was also performed and it revealed that the contribution of energy is significant, therefore a sensitivity analysis with different energy scenarios was performed. An uncertainty analysis using Monte Carlo analysis was also performed to validate the consistency of the results in each of the comparisons.

Life cycle assessment (LCA) of a bio-fuel cell fed with waste biomass: potential for scale-up and process optimization

In this Thesis, a life cycle analysis (LCA) of a biofuel cell designed by a team from the University of Bologna was done. The purpose of this study is to investigate the possible environmental impacts of the production and use of the cell and a possible optimization for an industrial scale-up. To do so, a first part of the paper was devoted to studying the present literature on biomass, and fuel cell treatments and then LCA studies on them. The experimental part presents the work done to create the Life Cycle Inventory and Life Cycle Impact Assessment. Several alternative scenarios were created to study process optimization. Reagents and energy supply were changed. To examine whether this technology can be competitive, a comparison was made with some biofuel cell use scenarios with traditional biomass treatment technologies. The result of this study is that this technology is promising from an environmental point of view in case it is possible to recover nutrients in output, without excessive energy consumption, and to minimize the use of energy used to prepare the solution.

Model morphisms (MoMo) to enable language independent information models and interoperable business networks

MSc. Dissertation presented at Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa to obtain the Master degree in Electrical and Computer Engineering

Technology market transfer plan launch of DELIVES to E.U. Market©

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Biotecnologia

Sustainability of systems interoperability in dynamic business networks

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores

An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Recycled asphalt mixtures with foamed bitumen: an alternative to build ecofriendly road pavements

Nowadays, recycling has become a very important objective for the society in the scope of a closed loop product life cycle. In recent years, new recycling techniques have been developed in the area of road pavements that allow the incorporation of high percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures. The use of foamed bitumen for production of recycled asphalt mixtures is one of those techniques, which also allows the reduction of the mixing temperatures (warm mix technology). However, it is important to evaluate if this solution can maintain or improve the performance of the resulting mixtures. Thus, the main aim of the present study is to assess the performance of warm recycled asphalt mixtures incorporating foamed bitumen as the new binder and 50% RA, in comparison with a control mixture using conventional bitumen. Four mixtures have been produced with 50% RA, one of them at typical high mixing temperatures with a conventional bitumen (control mixture) and the other three with foamed bitumen at different production temperatures. These four mixtures were tested to evaluate their compactability and water sensitivity. The laboratory test results showed that the production of recycled mixtures with foamed bitumen can be reduced by 40ºC without changing the performance of the resulting mixtures.

Sustentabilidade no Design: uma abordagem aos resíduos limpos das indústrias do calçado

Dissertação de mestrado em Design e Marketing

Ciclo de vida do produto: desenvolvimento e produção: estudo de caso

Dissertação de mestrado em Design e Marketing

Anàlisi del Cicle de Vida (ACV) del Monoestearat de Glicerina a CRODA Ibérica, S.A. – Mevisa Site

L’estudi de l’Anàlisi del Cicle de Vida (ACV) ha estat realitzat a l’empresa CRODA Ibèrica S.A - Mevisa Site, en concret a la línia productiva on s’hi fabrica el monoestearat de glicerina utilitzant una eina informàtica comercial denominada SIMAPRO que analitza i compara els aspectes mediambientals d’un producte d’una manera sistemàtica i consistent seguint les recomanacions de les normes ISO 14040

Employment Protection, International Specialization, and Innovation

We develop a model to analyse the implications of firing costs on incentives for R&D and international specialization. The Key idea is paying the firing cost, the country with a rigid labor market will tend to produce relatively secure goods, at a late stage of their product life cycle. Under international trade, an international product cycle emerges where, roughly, new goods are first produced in the low firing cost country will specialize in 'secondary innovations', that is, improvements in existing goods, while the low firing cost country will more specialize in 'primary innovation', that is, invention of new goods.

Employment protection, international specialization and innovation

We develop a model to analyse the implications of firing costs on incentivesfor R&D and international specialization. The Key idea is paying the firingcost, the country with a rigid labor market will tend to produce relativelysecure goods, at a late stage of their product life cycle.Under international trade, an international product cycle emerges where,roughly, new goods are first produced in the low firing cost country willspecialize in 'secondary innovations', that is, improvements in existinggoods, while the low firing cost country will more specialize in 'primaryinnovation', that is, invention of new goods.