Trajectoires développementales des dimensions du profil de dysrégulation (CBCL-DE) – agressivité, anxiété et inattention : éléments prédicteurs de diplomation au secondaire chez les garçons.

Ouvrage réalisé sous la supervision du comité de jury composé des membres suivants: Dre Leila Ben Amor, Dre Diane Sauriol, Daniel Fiset, PhD. & Éric Lacourse PhD.

L’immunothérapie orale pour le traitement des allergies alimentaires multiples

La prévalence des allergies alimentaires IgE-médiées aurait triplé au cours de la dernière décennie avec des études Nord-Américaines atteignant les 8% chez les enfants. Quoiqu’il n’y ait à ce jour aucun traitement curatif pour les allergies alimentaires, l’immunothérapie oral (OIT) constitue une nouvelle approche expérimentale prometteuse. Cette dernière consiste en l’administration de doses progressive d’allergènes par voie orale sur une période prolongée dans le but d’instaurer un état de désensibilisation et possiblement une tolérance orale soutenue. Cette approche a été démontrée sécuritaire et permettrait la désensibilisation à haute dose de plus de 80% des participants allergiques aux arachides, lait ou œufs. Dans cette thèse, nous présentons 2 études de phase 1 portant sur des protocoles d’OIT, destinés à optimiser l’efficience du traitement chez les sujets avec allergies alimentaires multiples. Près de 30% des enfants avec allergie alimentaire sont allergiques à plus d’un aliment, une proportion qui augmente à 70% lorsqu’on considère les cas les plus sévères. Ces enfants sont à risque augmenté de réactions accidentelles et souffrent d’un impact plus grand sur leur qualité de vie. Dans la première étude, en créant un mélange individualisé avec un ratio stochiométrique 1:1 entre les protéines des aliments allergiques de l’enfant, nous démontrons qu’il est possible de désensibiliser jusqu’à 5 aliments simultanément avec un profil d’innocuité similaire à une monothérapie. Dans la seconde étude, nous utilisons un traitement à l’omalizumab, un anticorps monoclonal anti-IgE, pour permettre une désensibilisation orale multi-allergénique fortement accélérée. Lorsque comparé à l’approche sans omalizumab, ce protocole s’associe à une nette diminution du temps requis pour atteindre les doses d’entretien, passant d’une médiane de 21 à 4 mois, sans affecter le profil d’innocuité. Alors que ces études fournissent des approches cliniques raisonnables pour désensibiliser la population multi-allergique, plusieurs questions persistent, notamment en ce qui a trait à l’induction de tolérance permanente. Une barrière majeure à cet égard réside dans notre piètre compréhension des mécanismes sous-jacents à l’immunothérapie. Prenant avantage d’échantillons cliniques bien caractérisés provenant des essais cliniques ci-haut mentionnés, nous utilisons les nouvelles technologies de séquençage TCR pour suivre la distribution clonale des lymphocytes T spécifiques aux arachides durant une immunothérapie orale. Nous démontrons que l’OIT s’associe à des changements significatifs dans les fréquences des clones spécifiques, suggérant un processus d’épuisement clonal et de remplacement. Nous démontrons par ailleurs que le test de prolifération lymphocytaire, traditionnellement utilisé pour évaluer la réponse cellulaire allergique, est dominé par une distribution polyclonale hautement non-spécifique. Cette observation a des implications majeures considérant que la plupart de la littérature actuelle sur la réponse T se base sur cette technique. En somme, cette thèse jette les bases pour des programmes de recherche translationnelle pour optimiser et personnaliser les protocoles cliniques actuels et développer de nouvelles avenues d’investigation et de traitement pour améliorer la prise en charge des sujets avec allergies alimentaires.

La signification expérientielle et les facteurs qui influencent la qualité de vie au travail des cadres gestionnaires infirmiers de premier niveau œuvrant en établissements de santé

Au cours des trois dernières décennies, le travail quotidien des cadres gestionnaires infirmiers de premier niveau (CGIPN) a subi de profondes transformations quant aux rôles qu’ils occupent et aux responsabilités qui leur incombent dans les divers établissements de santé. Ces CGIPN vivent et subissent de la pression au regard de leur charge de travail, faisant en sorte qu’ils perçoivent avoir peu de temps pour réaliser adéquatement leur travail en gestion, et que plusieurs infirmières de la relève qui souhaitent faire carrière en gestion se questionnent sur la possibilité d’œuvrer dans ce domaine de la pratique. Peu d’études portent sur l’état de la qualité de vie au travail (QVT) chez ces professionnels. Divisé en trois volets, le projet de recherche mixte séquentielle exploratoire a pour objectif général d’explorer la QVT chez les CGIPN et les facteurs qui l’influencent dans les divers établissements de santé québécois. Les objectifs spécifiques visent à : 1) décrire et comprendre ce que signifie la QVT auprès des 14 CGIPN œuvrant en Centre hospitalier affilié (CHA) à l’Université, 2) décrire et comprendre ce que signifie l’absence d’une QVT auprès des CGIPN en CHA, 3) développer et valider un nouvel instrument de mesure des facteurs favorables et défavorables pouvant influer sur la QVT à partir des données qualitatives auprès de CGIPN (n= 11) œuvrant en Centre de santé et des services sociaux et de CGIPN (n= 11) en Centre hospitalier universitaire, 4) identifier et mesurer les facteurs qui influencent la QVT des CGIPN (n= 291) travaillant dans divers établissements publics de santé et 5) déterminer si les caractéristiques sociodémographiques influencent le choix des facteurs de la QVT. Inspiré de la philosophie du Human caring de Watson comme perspective disciplinaire, le premier volet qualitatif fait appel à une méthode phénoménologique descriptive husserlienne. Pour ce faire, deux séries d’entretiens semi-dirigés à l’aide d’un guide d’entrevue visent à répondre aux deux premiers objectifs. Le second volet cible l’élaboration et la validation d’un instrument de mesure permettant de répondre au troisième objectif de la recherche et le dernier volet, de type quantitatif corrélationnel, s’applique à répondre aux deux derniers objectifs. Dans la première phase, l’analyse visuelle des données qualitatives (verbatim) permet l’émergence des résultats qualitatifs, soit de cinq eidos-thèmes favorables exprimés par les participants et décrits par ordre d’importance : 1) l’actualisation du leadership et des habiletés politiques pour l’amélioration de la qualité des soins infirmiers, 2) les éléments contextuels propices à l’humanisation organisationnelle, 3) le soutien organisationnel favorisant l’épanouissement socioprofessionnel et personnel, 4) l’organisation apprenante favorisant le développement des compétences en gestion des soins infirmiers et 5) l’accompagnement personnalisé répondant aux besoins spécifiques des novices en gestion des soins infirmiers. L’essence de la QVT pour les CGIPN se définit par l’émancipation socioprofessionnelle du cadre gestionnaire infirmier de premier niveau dans sa pratique clinico-administrative au sein d’une organisation humaniste. De plus, trois eidos-thèmes défavorables se dégagent des analyses qualitatives. Les résultats, décrits par ordre d’importance, sont : 1) la déshumanisation organisationnelle, 2) les conditions défavorables à la pratique en gestion des soins infirmiers et 3) l’accompagnement insuffisant des gestionnaires infirmiers novices. L’essence de l’absence d’une QVT pour les CGIPN se présente comme la dysharmonie au travail du cadre gestionnaire infirmier de premier niveau à l’intérieur d’une structure organisationnelle déshumanisante mettant en péril sa pratique clinico-administrative. Par la suite, une mise en relation des deux essences du phénomène a permis de faire émerger la signification universelle de l’expérience de la QVT et l’absence de celle-ci pour des CGIPN œuvrant en CHA comme étant : une dialectique en administration des services infirmiers dans laquelle se vit des pratiques humanisantes permettant l’atteinte d’un idéal de QVT, en coexistence avec des pratiques déshumanisantes conduisant à l’absence de QVT. Afin de respecter les postulats des méthodes quantitatives, les huit eidos-thèmes qui émergent de la première phase qualitative se transforment en facteurs favorables (FF) et défavorables (FD) à la QVT pour la réalisation des deuxième et troisième phases de la recherche. Dans la seconde phase, le construit théorique qui provient des huit eidos-thèmes et 23 thèmes permet de développer un nouvel instrument de mesure qui s’avère unique à cette population à l’étude. L’analyse psychométrique de l’instrument de mesure (questionnaire auto-administré en mode électronique) permet l’obtention d’un score global du coefficient alpha de Cronbach (α) de 0,93, ce qui est jugé excellent. Dans la troisième et dernière phase, les analyses statistiques des données (logiciel SPSS, version 22 pour Windows 7, 2013) issues de l’enquête quantitative provinciale en ligne (Web) mettent en évidence des résultats probants. Les résultats du questionnaire en ligne avec une échelle ordinale à cinq niveaux révèlent un score global du coefficient alpha de Cronbach à 0,95. De plus, les résultats quantitatifs suggèrent que les facteurs favorables (FF) à la QVT ont des scores moyens de 3,99 (FF1), 3,97 (FF2), 3,96 (FF3), 3,72 (FF4) et 3,53 (FF5) et les trois facteurs défavorables (FD) à la QVT ont des scores moyens de 3,91(FD1), 3,78 (FD2) et 3,56 (FD3). Ces facteurs correspondent aux eidos-thèmes favorables et défavorables de la QVT du volet qualitatif phénoménologique. Les résultats quantitatifs révèlent quelques relations significatives des caractéristiques sociodémographiques (âge et années d’expérience) sur le choix des facteurs qui influencent le plus fortement la QVT. En conclusion, le fait de pouvoir mieux décrire et comprendre la signification de la QVT ainsi que son absence et de pouvoir identifier les facteurs qui sont les plus susceptibles de l’influencer permet de formuler des recommandations pour les quatre domaines de la pratique infirmière. Des pistes d’avenues sont formulées pour maintenir la relève infirmière à des postes de CGIPN au sein des organisations de santé en lui assurant des moyens pour optimiser humainement sa QVT.

MQFD: A Model for Synergizing TPM and QFD

This thesis presents the methodology of linking Total Productive Maintenance (TPM) and Quality Function Deployment (QFD). The Synergic power ofTPM and QFD led to the formation of a new maintenance model named Maintenance Quality Function Deployment (MQFD). This model was found so powerful that, it could overcome the drawbacks of TPM, by taking care of customer voices. Those voices of customers are used to develop the house of quality. The outputs of house of quality, which are in the form of technical languages, are submitted to the top management for making strategic decisions. The technical languages, which are concerned with enhancing maintenance quality, are strategically directed by the top management towards their adoption of eight TPM pillars. The TPM characteristics developed through the development of eight pillars are fed into the production system, where their implementation is focused towards increasing the values of the maintenance quality parameters, namely overall equipment efficiency (GEE), mean time between failures (MTBF), mean time to repair (MTIR), performance quality, availability and mean down time (MDT). The outputs from production system are required to be reflected in the form of business values namely improved maintenance quality, increased profit, upgraded core competence, and enhanced goodwill. A unique feature of the MQFD model is that it is not necessary to change or dismantle the existing process ofdeveloping house ofquality and TPM projects, which may already be under practice in the company concerned. Thus, the MQFD model enables the tactical marriage between QFD and TPM.First, the literature was reviewed. The results of this review indicated that no activities had so far been reported on integrating QFD in TPM and vice versa. During the second phase, a survey was conducted in six companies in which TPM had been implemented. The objective of this survey was to locate any traces of QFD implementation in TPM programme being implemented in these companies. This survey results indicated that no effort on integrating QFD in TPM had been made in these companies. After completing these two phases of activities, the MQFD model was designed. The details of this work are presented in this research work. Followed by this, the explorative studies on implementing this MQFD model in real time environments were conducted. In addition to that, an empirical study was carried out to examine the receptivity of MQFD model among the practitioners and multifarious organizational cultures. Finally, a sensitivity analysis was conducted to find the hierarchy of various factors influencing MQFD in a company. Throughout the research work, the theory and practice of MQFD were juxtaposed by presenting and publishing papers among scholarly communities and conducting case studies in real time scenario.

Investigations on some technologically important polymer nanocomposite films and semi crystalline Polypyrrole films

The present work deals with investigations on some technologically important polymer nanocomposite films and semi crystalline polypyrrole films.The work presented in the thesis deals with the realization of novel polymer nanocomposites with enhanced functionalities and prospects of applications in the fields related to nanophotonics. The development of inorganic/polymer nanocomposites is a rapidly expanding multidisciplinary research area with profound industrial applications. The incorporation of suitable inorganic nanoparticles can endow the resulting nanocomposites with excellent electrical, optical and mechanical properties. The first chapter gives a general introduction to nanotechnology, nanocomposites and conducting polymers. It also emphasizes the significance of ZnO among other semiconductor materials, which forms the inorganic filler in the polymer nanocomposites of the present study. This chapter also gives general ideas on the properties and applications of conducting polymers with special reference to polypyrrole. The objectives of the present investigations are also clearly addressed in this chapter. The second chapter deals with the theoretical aspects and details of all the experimental techniques used in the present work for the synthesis of polymer nanocomposites and polypyrrole samples and their various characterizations. Chapter 3 is based on the preparation and properties of ZnO/Polystyrene nanocomposite film samples. The optical properties of these nanocomoposite films are discussed in detail.Chapter 4 deals with the detailed investigations on the dependence of the optical properties of ZnO/PS nanocomposite films on the size of the nanostructured ZnO filler material. The excellent UV shielding properties of these nanocomposite films form the highlight of this chapter. Chapter 5 gives a detailed analysis of the nonlinear optical properties of ZnO/PS nanocomposite films using Z scan technique. The effect of ZnO particle size in the composite films on the nonlinear properties is discussed. The present study involves two phases of research activities. In the first phase, the linear and nonlinear optical properties of ZnO/polymer nanocomposites are investigated in detail. The second phase of work is centered on the synthesis and related studies on highly crystalline polypyrrole films. In the present study, nanosized ZnO is synthesized using wet chemical method at two different temperatures

Post Environmental Evaluation of the Rajjaprabha Dam in Thailand

This thesis Entitled Post-Environmental Evaluation of The Rajjaprabha Dam In Thailand. This post evaluation of environmental consequences of Rajjaprabha dam IS conducted ten years after its commencement. The Rajjaprabha dam project was planned and implemented as a multipurpose project, mainly for hydropower production, flood protection, fisheries, recreation and irrigation. The project includes the dam and reservoir with a 240 MW hydropower plant located about 90 km upstream from Surat Thani province, and irrigation systems covering the coastal plain in Surat Thani. The upstream storage reservoir (with about 5,639 mcm storage) and the hydropower plant had already been implemented. The first phase of irrigation system covers an area of 23,100 hectares. The second phase is envisaged to cover about 50,000 hectares. This study was conducted with the following objectives: (I) to assess all existing environmental resources and their values with the help of input-output analysis (2) to findout the beneficial impacts of the project (3) to evaluate the actual positive effects vis-a-vis the estimated effects before the project was implemented and (4) to identify all significant changes in relatives to the impacts previously assessed. The study area includes the Phum Duang river basin of about 4,668 km2 (placed on the areas that are upstream and downstream to the damsite), The duration of study is limited to 10 years after the dam has become operational i.e. from 1987-1997. The results of the study reveal that there is no significant changes in climatic and ground water resources, with respect to the study area inspte of the fact that the physical and chemical properties of the soil have slightly changed. Sedimentation in the reservoir does not have much effect on the function of the dam.

Studies on polymer blends with special reference to NBR/PVC and CR/PVC blends

The study is undertaken on PVC blends because of their all-round importance-One of the most prominent needs of PVC in application end-use is permanent plasticizationlo. Butadiene-acrylonitrile rubber (NBR) has been utilized as permanent plasticizer for PVC since the 1940s for wire and cable insulation, food contact, and pondliners used for oil containment23'24. Also plasticized PVC has been added to vulcanizable nitrile rubber, to yield improved ozone, thermal ageing, and chemical resistance resulting in applications including fuel hose covers, gaskets, conveyor belt covers, and printing roll covers. This blend is miscible in the range of 23 to 45 per cent acrylonitrile content in the butadiene-acrylqnitrile copolymerzs. The first phase of the study was directed towards modification blends. These blends, in addition to the polymers, require a host of additives like curatives for the NBR phase and stabilizers for the PVC phase26of the existing PVC blends, especially NBR/PVC. The second phase of the study was directed towards the development of novel PVC based blends. Chloroprene rubber (polychloroprene) (CR) is structurally similar to PVC and hence is likely to form successful blends with PVC32.

Investigations on novel polymer nano composites and bio-compatible manganese doped ZnS nanocrystals for photonic and bio-imaging applications

Fluorescence is a powerful tool in biological research, the relevance of which relies greatly on the availability of sensitive and selective fluorescent probes. Nanometer sized fluorescent semiconductor materials have attracted considerable attention in recent years due to the high luminescence intensity, low photobleaching, large Stokes’ shift and high photochemical stability. The optical and spectroscopic features of nanoparticles make them very convincing alternatives to traditional fluorophores in a range of applications. Efficient surface capping agents make these nanocrystals bio-compatible. They can provide a novel platform on which many biomolecules such as DNA, RNA and proteins can be covalently linked. In the second phase of the present work, bio-compatible, fluorescent, manganese doped ZnS (ZnS:Mn) nanocrystals suitable for bioimaging applications have been developed and their cytocompatibility has been assessed. Functionalization of ZnS:Mn nanocrystals by safe materials results in considerable reduction of toxicity and allows conjugation with specific biomolecules. The highly fluorescent, bio-compatible and water- dispersible ZnS:Mn nanocrystals are found to be ideal fluorescent probes for biological labeling

Occurrence of filamentous algae and soil characteristics in the paddy fields of Kuttanad and Kole lands of Kerala

The present work is the study of filamentous algae in the paddy fields of Kuttanad and Kole lands of Kerala. This investigation was initiated by sampling of filamentous algae in Kuttanad during December 2010 to February 2011. A second phase of sampling was done from November 2011 to February 2012. The sampling periodicity corresponded to the crop growth starting from field preparation through sowing, and continued till the harvest. Sampling locations were selected from the active paddy cultivation regions of the six agronomic zones of Kuttanad. The numbers of sampling locations were proportional to the area of each zone. Algae of the Kole lands were collected during from October 2011 to January 2012. It was observed that blue-green algae dominated in both Kuttanad and Kole lands. Thirty two species of blue-green algae and eight species of green algae were identified from Kuttanad. The highest number of algal species was observed from Kayal lands in Kuttanad throughout the cropping season. Among the thirty two species of blue-green algae twenty five species are nonheterocystous and seven species are heterocystous. Twenty eight species of blue-green and six species of green algae were identified from Kole lands, and highest number of species was observed in Palakkal throughout the cropping season. Among the twenty eight species of blue-green algae collected from Kole lands twenty one species are non-heterocystous, and only seven species are heterocystous filamentous algae. Blooms of Spirogyra were observed during the second phase of sampling in Kuttanad and also in the Kole lands. The results of the germination study revealed that the extract of Spirogyra sp. inhibited seed germination and reduced seedling vigour. The growth of the treated seedlings was evaluated by pot experiments. The results clearly showed that Spirogyra sp. can negatively affect the seed germination, seedling vigour, and the yield of rice.

A Study of Single Stage Semi‐Dry Anaerobic Digestion of Organic Fraction of Municipal Solid Waste

Solid waste generation is a natural consequence of human activity and is increasing along with population growth, urbanization and industrialization. Improper disposal of the huge amount of solid waste seriously affects the environment and contributes to climate change by the release of greenhouse gases. Practicing anaerobic digestion (AD) for the organic fraction of municipal solid waste (OFMSW) can reduce emissions to environment and thereby alleviate the environmental problems together with production of biogas, an energy source, and digestate, a soil amendment. The amenability of substrate for biogasification varies from substrate to substrate and different environmental and operating conditions such as pH, temperature, type and quality of substrate, mixing, retention time etc. Therefore, the purpose of this research work is to develop feasible semi-dry anaerobic digestion process for the treatment of OFMSW from Kerala, India for potential energy recovery and sustainable waste management. This study was carried out in three phases in order to reach the research purpose. In the first phase, batch study of anaerobic digestion of OFMSW was carried out for 100 days at 32°C (mesophilic digestion) for varying substrate concentrations. The aim of this study was to obtain the optimal conditions for biogas production using response surface methodology (RSM). The parameters studied were initial pH, substrate concentration and total organic carbon (TOC). The experimental results showed that the linear model terms of initial pH and substrate concentration and the quadratic model terms of the substrate concentration and TOC had significant individual effect (p < 0.05) on biogas yield. However, there was no interactive effect between these variables (p > 0.05). The optimum conditions for maximizing the biogas yield were a substrate concentration of 99 g/l, an initial pH of 6.5 and TOC of 20.32 g/l. AD of OFMSW with optimized substrate concentration of 99 g/l [Total Solid (TS)-10.5%] is a semi-dry digestion system .Under the optimized condition, the maximum biogas yield was 53.4 L/kg VS (volatile solid).. In the second phase, semi-dry anaerobic digestion of organic solid wastes was conducted for 45 days in a lab-scale batch experiment for substrate concentration of 100 g/l (TS-11.2%) for investigating the start-up performances under thermophilic condition (50°C). The performance of the reactor was evaluated by measuring the daily biogas production and calculating the degradation of total solids and the total volatile solids. The biogas yield at the end of the digestion was 52.9 L/kg VS for the substrate concentration of 100 g/l. About 66.7% of volatile solid degradation was obtained during the digestion. A first order model based on the availability of substrate as the limiting factor was used to perform the kinetic studies of batch anaerobic digestion system. The value of reaction rate constant, k, obtained was 0.0249 day-1. A laboratory bench scale reactor with a capacity of 36.8 litres was designed and fabricated to carry out the continuous anaerobic digestion of OFMSW in the third phase. The purpose of this study was to evaluate the performance of the digester at total solid concentration of 12% (semi-dry) under mesophlic condition (32°C). The digester was operated with different organic loading rates (OLRs) and constant retention time. The performance of the reactor was evaluated using parameters such as pH, volatile fatty acid (VFA), alkalinity, chemical oxygen demand (COD), TOC and ammonia-N as well as biogas yield. During the reactor’s start-up period, the process is stable and there is no inhibition occurred and the average biogas production was 14.7 L/day. The reactor was fed in continuous mode with different OLRs (3.1,4.2 and 5.65 kg VS/m3/d) at constant retention time of 30 days. The highest volatile solid degradation of 65.9%, with specific biogas production of 368 L/kg VS fed was achieved with OLR of 3.1 kg VS/m3/d. Modelling and simulation of anaerobic digestion of OFMSW in continuous operation is done using adapted Anaerobic Digestion Model No 1 (ADM1).The proposed model, which has 34 dynamic state variables, considers both biochemical and physicochemical processes and contains several inhibition factors including three gas components. The number of processes considered is 28. The model is implemented in Matlab® version 7.11.0.584(R2010b). The model based on adapted ADM1 was tested to simulate the behaviour of a bioreactor for the mesophilic anaerobic digestion of OFMSW at OLR of 3.1 kg VS/m3/d. ADM1 showed acceptable simulating results.

New studies on the versatile roles of Polyaniline and its composites in polymer based optoelectronic and energy storage devices

From the early stages of the twentieth century, polyaniline (PANI), a well-known and extensively studied conducting polymer has captured the attention of scientific community owing to its interesting electrical and optical properties. Starting from its structural properties, to the currently pursued optical, electrical and electrochemical properties, extensive investigations on pure PANI and its composites are still much relevant to explore its potentialities to the maximum extent. The synthesis of highly crystalline PANI films with ordered structure and high electrical conductivity has not been pursued in depth yet. Recently, nanostructured PANI and the nanocomposites of PANI have attracted a great deal of research attention owing to the possibilities of applications in optical switching devices, optoelectronics and energy storage devices. The work presented in the thesis is centered around the realization of highly conducting and structurally ordered PANI and its composites for applications mainly in the areas of nonlinear optics and electrochemical energy storage. Out of the vast variety of application fields of PANI, these two areas are specifically selected for the present studies, because of the following observations. The non-linear optical properties and the energy storing properties of PANI depend quite sensitively on the extent of conjugation of the polymer structure, the type and concentration of the dopants added and the type and size of the nano particles selected for making the nanocomposites. The first phase of the work is devoted to the synthesis of highly ordered and conducting films of PANI doped with various dopants and the structural, morphological and electrical characterization followed by the synthesis of metal nanoparticles incorporated PANI samples and the detailed optical characterization in the linear and nonlinear regimes. The second phase of the work comprises the investigations on the prospects of PANI in realizing polymer based rechargeable lithium ion cells with the inherent structural flexibility of polymer systems and environmental safety and stability. Secondary battery systems have become an inevitable part of daily life. They can be found in most of the portable electronic gadgets and recently they have started powering automobiles, although the power generated is low. The efficient storage of electrical energy generated from solar cells is achieved by using suitable secondary battery systems. The development of rechargeable battery systems having excellent charge storage capacity, cyclability, environmental friendliness and flexibility has yet to be realized in practice. Rechargeable Li-ion cells employing cathode active materials like LiCoO2, LiMn2O4, LiFePO4 have got remarkable charge storage capacity with least charge leakage when not in use. However, material toxicity, chance of cell explosion and lack of effective cell recycling mechanism pose significant risk factors which are to be addressed seriously. These cells also lack flexibility in their design due to the structural characteristics of the electrode materials. Global research is directed towards identifying new class of electrode materials with less risk factors and better structural stability and flexibility. Polymer based electrode materials with inherent flexibility, stability and eco-friendliness can be a suitable choice. One of the prime drawbacks of polymer based cathode materials is the low electronic conductivity. Hence the real task with this class of materials is to get better electronic conductivity with good electrical storage capability. Electronic conductivity can be enhanced by using proper dopants. In the designing of rechargeable Li-ion cells with polymer based cathode active materials, the key issue is to identify the optimum lithiation of the polymer cathode which can ensure the highest electronic conductivity and specific charge capacity possible The development of conducting polymer based rechargeable Li-ion cells with high specific capacity and excellent cycling characteristics is a highly competitive area among research and development groups, worldwide. Polymer based rechargeable batteries are specifically attractive due to the environmentally benign nature and the possible constructional flexibility they offer. Among polymers having electrical transport properties suitable for rechargeable battery applications, polyaniline is the most favoured one due to its tunable electrical conducting properties and the availability of cost effective precursor materials for its synthesis. The performance of a battery depends significantly on the characteristics of its integral parts, the cathode, anode and the electrolyte, which in turn depend on the materials used. Many research groups are involved in developing new electrode and electrolyte materials to enhance the overall performance efficiency of the battery. Currently explored electrolytes for Li ion battery applications are in liquid or gel form, which makes well-defined sealing essential. The use of solid electrolytes eliminates the need for containment of liquid electrolytes, which will certainly simplify the cell design and improve the safety and durability. The other advantages of polymer electrolytes include dimensional stability, safety and the ability to prevent lithium dendrite formation. One of the ultimate aims of the present work is to realize all solid state, flexible and environment friendly Li-ion cells with high specific capacity and excellent cycling stability. Part of the present work is hence focused on identifying good polymer based solid electrolytes essential for realizing all solid state polymer based Li ion cells.The present work is an attempt to study the versatile roles of polyaniline in two different fields of technological applications like nonlinear optics and energy storage. Conducting form of doped PANI films with good extent of crystallinity have been realized using a level surface assisted casting method in addition to the generally employed technique of spin coating. Metal nanoparticles embedded PANI offers a rich source for nonlinear optical studies and hence gold and silver nanoparticles have been used for making the nanocomposites in bulk and thin film forms. These PANI nanocomposites are found to exhibit quite dominant third order optical non-linearity. The highlight of these studies is the observation of the interesting phenomenon of the switching between saturable absorption (SA) and reverse saturable absorption (RSA) in the films of Ag/PANI and Au/PANI nanocomposites, which offers prospects of applications in optical switching. The investigations on the energy storage prospects of PANI were carried out on Li enriched PANI which was used as the cathode active material for assembling rechargeable Li-ion cells. For Li enrichment or Li doping of PANI, n-Butyllithium (n-BuLi) in hexanes was used. The Li doping as well as the Li-ion cell assembling were carried out in an argon filled glove box. Coin cells were assembled with Li doped PANI with different doping concentrations, as the cathode, LiPF6 as the electrolyte and Li metal as the anode. These coin cells are found to show reasonably good specific capacity around 22mAh/g and excellent cycling stability and coulombic efficiency around 99%. To improve the specific capacity, composites of Li doped PANI with inorganic cathode active materials like LiFePO4 and LiMn2O4 were synthesized and coin cells were assembled as mentioned earlier to assess the electrochemical capability. The cells assembled using the composite cathodes are found to show significant enhancement in specific capacity to around 40mAh/g. One of the other interesting observations is the complete blocking of the adverse effects of Jahn-Teller distortion, when the composite cathode, PANI-LiMn2O4 is used for assembling the Li-ion cells. This distortion is generally observed, near room temperature, when LiMn2O4 is used as the cathode, which significantly reduces the cycling stability of the cells.

SA-ß-galactosidasa como predictor de senescencia celular del epitelio superficial ovárico y factores de riesgo de cáncer de ovario

Introducción: la tercera causa de muerte ginecológica es cáncer de ovario (CO), la detección temprana es fundamental para reducir mortalidad. El objetivo es establecer asociación entre senescencia en cultivos de tejido epitelial de ovario (ESO) mediante expresión de enzima ßgalactosidasa/normalizada y factores de riesgo reconocidos para CO. Métodos: estudio descriptivo observacional con fase exploratoria de datos proporcionados por “TRF2” segunda fase; muestra 29 tejidos de mujeres con ooforectomia condiciones benignas, analizadas estadísticamente con confianza del 95%, software SPSS versión 17, datos se presentan con desviación estándar, promedio, mediana (velocidad de crecimiento celular y ßgal/Normalizada) y porcentajes (variables categóricas). Realizo comparación con t-student, test de normalidad con Shapiro Wilks y asociación mediante análisis multivariado. Resultados: encuentra evidencia estadísticamente significativa (p < 0,05) para asociación entre antecedente familiar de otros tipos de cáncer con cáncer gástrico (IC95%: -2,84, -0,23) y cáncer de seno (IC95%: -3,39, -0,38); no tener régimen de afiliación en salud (vinculado) (IC95%: -3,67 -0,014); uso de método anticonceptivo de barrera (IC95%: -3,95, -0,07); consumo de embutidos (IC95%: -3,30, -0,21) y enlatados (IC95%: -3,62, -0,030) 1 a 3 veces/semana y consumo de alcohol (IC95%: -2,33, -0,33) con aumento expresión ßgal/Normalizada. Discusión: senescencia es antitumorigénica a edades tempranas, en avanzadas es protumorigénica, cuando hay mucha acumulación de células senescentes en tejido, éstas cambian su perfil senector produciendo sustancias que afectan a las vecinas, lo que lleva a transformación tumoral. Esta investigación es novedosa.

Plan exportador piña perolera

Teniendo en cuenta las características del mercado europeo en el cual se va a incursionar, se desarrolló un plan exportador donde el producto a comercializar es la piña perolera, una fruta que se cultiva de manera óptima dentro del territorio colombiano teniendo como departamento Santander el cual concentra el 100% de su producción al cultivo y cosecha de esta fruta. Como primera fase para la elaboración de este trabajo, se realizó el estudio y la recopilación de información de la parte técnica de la piña perolera. La segunda fase consta del estudio de la piña en el mundo y su posicionamiento. La fase tres se basa en el estudio de mercados para Alemania, Bélgica y Holanda, encontrando como país objetivo este último. La cuarta fase, es el estudio logístico para determinar los tiempos de producción, empaque y transporte de la fruta. La quinta y última fase es el análisis financiero para evidenciar la viabilidad del proyecto y su finalidad. El alcance que tiene este plan exportador es una de las principales conclusiones que arroja el proyecto, de igual manera para su debida consecución es necesario tener estrategias claras para que los planes propuestos tengan la funcionalidad y finalidad deseada.

Construcción de una guía fotográfica para valorar el grado de fotoenvejecimiento cutáneo del dorso de las manos

Introducción: La exposición crónica al sol es la principal causa ambiental de envejecimiento cutáneo. (1) Pese a que existen clasificaciones exclusivas de fotoenvejecimiento a nivel facial, no existen, con estas características a nivel de manos. El objetivo de este estudio fue elaborar una guía fotográfica para identificar fotoenvejecimiento en el dorso de manos. Materiales y metodos: En la primera fase se seleccionaron nueve características del puntaje SCINEXA, utilizadas en la fase dos por un grupo de cinco expertos para definir cuatro grados de severidad del fotoenvejecimiento de las manos. En la fase tres otros seis expertos clasificaron en 150 fotografías estandarizadas el grado de fotoenvejecimiento de las manos teniendo en cuenta los grados definidos. Por último se realizó análisis estadístico para valorar la concordancia inter evaluadores y se tomaron las fotos con mejor concordancia para la construcción de la guía fotográfica. Resultados: La valoración de las características tomadas para cada grado de fotoenvejecimiento de las manos tuvo una concordancia casi del 100%, mientras que la concordancia global interevaluadores de las 150 fotografías fue del 41.1%. La mejor concordancia interevaluadores se dio para el grado 0 (57,2%). Discusión: Las escalas fotográficas de las manos con que se contaba están más orientadas a definir los grados de envejecimiento tomando a la vez signos de crono y fotoenvejecimiento, por su parte la guía fotográfica obtenida en este estudio valora únicamente el fotoenvejecimiento siendo esta una herramienta ideal para evaluar la eficacia de tratamientos cuyo propósito sea el de mejorar el fotodaño cutáneo.

Seminar: Symbol Management systems to support democracy in development of an online Symbol Dictionary

Abstract This seminar will introduce an initial year of research exploring participation in the development of a bilingual symbol dictionary. Symbols can be a communication and literacy ‘lifeline’ for those unable to communicate through speech or writing. We will discuss how an online system has been built to overcome language, cultural and literacy skill issues for a country where 86% are expatriates but the target clients are Arabic born individuals with speech and language impairments. The symbols in use at present are inappropriate and yet there is no democratic way of providing a ‘user voice’ for making choices, let alone easy mechanisms for adapting and sharing newly developed symbols across the nation or extended Arabic world. This project aims to change this situation. Having sourced a series of symbols that could be adapted to suit user’s needs, the team needed to encourage those users, their carers and therapists to vote on whether the symbols would be appropriate and work with those already in use. The first prototype was developed and piloted during the WAISfest in 2013. The second phase needs further voting on the most suitably adapted symbols for use when communicating with others. There is a requirement to have mechanisms for evaluating the outcome of the votes, where symbols fail to represent accurate meanings, have inappropriate colours, representations and actions etc. There also remains the need to collect both quantitative and qualitative data. Not easy in a climate of acceptance of the expert view, a culture where to be critical can be a problem and time is not of the essence.