Passive control of a biventricular assist device with compliant inflow cannulae

Rotary ventricular assist device (VAD) support of the cardiovascular system is susceptible to suction events due to the limited preload sensitivity of these devices. This may be of particular concern with rotary biventricular support (BiVAD) where the native, flow-balancing Starling response is diminished in both ventricles. The reliability of sensor and sensor-less based control systems which aim to control VAD flow based on preload have limitations and thus an alternative solution is desired. This study introduces a compliant inflow cannula (CIC) which could improve the preload sensitivity of a rotary VAD by passively altering VAD flow depending on preload. To evaluate the design, both the CIC and a standard rigid inflow cannula were inserted into a mock circulation loop to enable biventricular heart failure support using configurations of atrial and ventricular inflow, and arterial outflow cannulation. A range of left (LVAD) and right VAD (RVAD) rotational speeds were tested as well as step changes in systemic/pulmonary vascular resistance to alter relative preloads, with resulting flow rates recorded. Simulated suction events were observed, particularly at higher VAD speeds, during support with the rigid inflow cannula, while the CIC prevented suction events under all circumstances. The compliant section passively restricted its internal diameter as preload was reduced, which increased the VAD circuit resistance and thus reduced VAD flow. Therefore, a compliant inflow cannula could potentially be used as a passive control system to prevent suction events in rotary left, right and biventricular support.

Road crashes and long term disabilities : Implications for policy and its implementation in Cambodia

The number of road crashes leading to disabilities is increasing alarmingly and constitutes a significant public health problem in many countries. So far, very few studies have been conducted to explore the impacts on persons with disabilities due to road crashes, and their families. This gap in the literature is especially large for low income countries such as Cambodia. This review explored relevant publications to provide background on persons in Cambodia with disabilities due to road crashes and their families. The review adds to the limited knowledge base in this area and has the potential to provide information on contextual issues relevant to the experience of disability in other developing countries, such as poverty, stigma and lack of resources. The findings of this review form the first part of a PhD study that will contribute to the development of informed policy change leading towards a safer system for all road users, including persons with disabilities.

Development and formative evaluation of a motorcycle rider training intervention to address risk taking

The need to address on-road motorcycle safety in Australia is important due to the disproportionately high percentage of riders and pillions killed and injured each year. One approach to preventing motorcycle-related injury is through training and education. However, motorcycle rider training lacks empirical support as an effective road safety countermeasure to reduce crash involvement. Previous reviews have highlighted that risk-taking is a contributing factor in many motorcycle crashes, rather than merely a lack of vehicle-control skills (Haworth & Mulvihill, 2005; Jonah, Dawson & Bragg, 1982; Watson et al, 1996). Hence, though the basic vehicle-handling skills and knowledge of road rules that are taught in most traditional motorcycle licence training programs may be seen as an essential condition of safe riding, they do not appear to be sufficient in terms of crash reduction. With this in mind there is considerable scope for the improvement of program focus and content for rider training and education. This program of research examined an existing traditional pre-licence motorcycle rider training program and formatively evaluated the addition of a new classroom-based module to address risky riding; the Three Steps to Safer Riding program. The pilot program was delivered in the real world context of the Q-Ride motorcycle licensing system in the state of Queensland, Australia. Three studies were conducted as part of the program of research: Study 1, a qualitative investigation of delivery practices and student learning needs in an existing rider training course; Study 2, an investigation of the extent to which an existing motorcycle rider training course addressed risky riding attitudes and motives; and Study 3, a formative evaluation of the new program. A literature review as well as the investigation of learning needs for motorcyclists in Study 1 aimed to inform the initial planning and development of the Three Steps to Safer Riding program. Findings from Study 1 suggested that the training delivery protocols used by the industry partner training organisation were consistent with a learner-centred approach and largely met the learning needs of trainee riders. However, it also found that information from the course needs to be reinforced by on-road experiences for some riders once licensed and that personal meaning for training information was not fully gained until some riding experience had been obtained. While this research informed the planning and development of the new program, a project team of academics and industry experts were responsible for the formulation of the final program. Study 2 and Study 3 were conducted for the purpose of formative evaluation and program refinement. Study 2 served primarily as a trial to test research protocols and data collection methods with the industry partner organisation and, importantly, also served to gather comparison data for the pilot program which was implemented with the same rider training organisation. Findings from Study 2 suggested that the existing training program of the partner organisation generally had a positive (albeit small) effect on safety in terms of influencing attitudes to risk taking, the propensity for thrill seeking, and intentions to engage in future risky riding. However, maintenance of these effects over time and the effects on riding behaviour remain unclear due to a low response rate upon follow-up 24 months after licensing. Study 3 was a formative evaluation of the new pilot program to establish program effects and possible areas for improvement. Study 3a examined the short term effects of the intervention pilot on psychosocial factors underpinning risky riding compared to the effects of the standard traditional training program (examined in Study 2). It showed that the course which included the Three Steps to Safer Riding program elicited significantly greater positive attitude change towards road safety than the existing standard licensing course. This effect was found immediately following training, and mean scores for attitudes towards safety were also maintained at the 12 month follow-up. The pilot program also had an immediate effect on other key variables such as risky riding intentions and the propensity for thrill seeking, although not significantly greater than the traditional standard training. A low response rate at the 12 month follow-up unfortunately prevented any firm conclusions being drawn regarding the impact of the pilot program on self-reported risky riding once licensed. Study 3a further showed that the use of intermediate outcomes such as self-reported attitudes and intentions for evaluation purposes provides insights into the mechanisms underpinning risky riding that can be changed by education and training. A multifaceted process evaluation conducted in Study 3b confirmed that the intervention pilot was largely delivered as designed, with course participants also rating most aspects of training delivery highly. The complete program of research contributed to the overall body of knowledge relating to motorcycle rider training, with some potential implications for policy in the area of motorcycle rider licensing. A key finding of the research was that psychosocial influences on risky riding can be shaped by structured education that focuses on awareness raising at a personal level and provides strategies to manage future riding situations. However, the formative evaluation was mainly designed to identify areas of improvement for the Three Steps to Safer Riding program and found several areas of potential refinement to improve future efficacy of the program. This included aspects of program content, program delivery, resource development, and measurement tools. The planned future follow-up of program participants' official crash and traffic offence records over time may lend further support for the application of the program within licensing systems. The findings reported in this thesis offer an initial indication that the Three Steps to Safer Riding is a useful resource to accompany skills-based training programs.

Cyclone intensity categories

The weather forecast centers in Australia and many other countries use a scale of cyclone intensity categories (categories 1-5) in their cyclone advisories, which are considered to be indicative of the cyclone damage potential. However, this scale is mainly based on maximum gust wind speeds. In a recent research project involving computer modeling of cyclonic wind forces on roof claddings and fatigue damage to claddings, it was found that cyclone damage not only depends on the maximum gust wind speed, but also on two other cyclone parameters, namely, the forward speed and radius to maximum winds. This paper describes the computer model used in predicting the cyclone damage to claddings and investigates the damage potential of a cyclone as a function of all the relevant cyclone parameters, based on which it attempts to refine the current scale of cyclone intensity categories.

Ratchetting of railhead in the vicinity of the gap of the insulated rail joints

Insulated Rail Joints (IRJs) are designed to electrically isolate two rails in rail tracks to control the signalling system for safer train operations. Unfortunately the gapped section of the IRJs is structurally weak and often fails prematurely especially in heavy haul tracks, which adversely affects service reliability and efficiency. The IRJs suffer from a number of failure modes; the railhead ratchetting at the gap is, however, regarded as the root cause and attended to in this thesis. Ratchetting increases with the increase in wheel loads; in the absence of a life prediction model, effective management of the IRJs for increased wagon wheel loads has become very challenging. Therefore, the main aim of this thesis is to determine method to predict IRJs' service life. The distinct discontinuity of the railhead at the gap makes the Hertzian theory and the rolling contact shakedown map, commonly used in the continuously welded rails, not applicable to examine the metal ratchetting of the IRJs. Finite Element (FE) technique is, therefore, used to explore the railhead metal ratchetting characteristics in this thesis, the boundary conditions of which has been determined from a full scale study of the IRJ specimens under rolling contact of the loaded wheels. A special purpose test set up containing full-scale wagon wheel was used to apply rolling wheel loads on the railhead edges of the test specimens. The state of the rail end face strains was determined using a non-contact digital imaging technique and used for calibrating the FE model. The basic material parameters for this FE model were obtained through independent uniaxial, monotonic tensile tests on specimens cut from the head hardened virgin rails. The monotonic tensile test data have been used to establish a cyclic load simulation model of the railhead steel specimen; the simulated cyclic load test has provided the necessary data for the three decomposed kinematic hardening plastic strain accumulation model of Chaboche. A performance based service life prediction algorithm for the IRJs was established using the plastic strain accumulation obtained from the Chaboche model. The predicted service lives of IRJs using this algorithm have agreed well with the published data. The finite element model has been used to carry out a sensitivity study on the effects of wheel diameter to the railhead metal plasticity. This study revealed that the depth of the plastic zone at the railhead edges is independent of the wheel diameter; however, large wheel diameter is shown to increase the IRJs' service life.

Comparison of moped, scooter and motorcycle crashes : implications for rider training and education

Scooter and moped sales have increased at a faster rate than motorcycle sales over the last decade in countries such as Australia, Canada and the United States. This may be particularly evident in jurisdictions where moped riding is permitted for car license holders and a motorcycle license is not required, such as in Queensland, Australia. Having historically comprised only a small proportion of powered two-wheelers (PTWs) outside of Europe and Asia, the safety of scooters and mopeds has received relatively little focused research attention. However, the recent trends in sales and crash involvement have stimulated greater interest in these PTW types. The current paper examines differences and similarities between scooters (over 50cc), mopeds (up to 50cc) and motorcycles in crash involvement and crash characteristics through analyses of crash and registration data from Queensland, Australia. The main findings include that moped and scooter riders are similar in terms of usage patterns, but the evidence suggests superior skills, greater experience and safer behaviour among scooter riders than moped riders. The requirement in Queensland for scooter riders but not moped riders to hold a motorcycle license, usually obtained through competency-based training and assessment, may help to explain some of this difference. Findings also suggest that scooter riders are safer than motorcycle riders in some respects, despite both being subject to the same licensing requirements which encourage participation in rider training. Safer attitudes and motivations rather than superior skills and knowledge may therefore underlie the differences between scooter and motorcycle riders. In summary, riders of larger scooters exhibit a combination of skills and behavior suggestive of safer riding than both their moped and motorcycle riding counterparts. It is reasonable to expect that mopeds and scooters will remain popular and that their usage may increase further, along with that of motorcycles. This research therefore has important practical implications regarding pathways to improved PTW safety. Future policy and planning should consider options for encouraging moped riders to acquire better riding skills and greater safety awareness, as apparent among scooter riders, including rider training, education and licensing. As is noted in recent literature and reflected in some contemporary rider training programs, motorcycle safety may be improved by addressing rider attitudes more comprehensively in addition to developing skills and knowledge.

Risk compensation in construction workers' activities

Construction has been plagued with serious injuries and deaths for years. Although the technological advances have made the world safer and healthier, researchers have noted that some safety interventions, which had clear objective safety benefits, had failed to achieve the forecast savings in lives and injuries. The purpose of this study was to explore whether the construction workers show risk compensation and engage in greater risk taking when certain types of safety measures are implemented in the construction site. A case study approach was used to achieve the aim of this study. A typical construction site in Sydney was selected as the subject of the case study. Data were collected through direct observations, questionnaires and interviews. The findings confirm that workers show risk compensation behaviours in the construction environment. The risk compensation behaviours of workers varied with the level of experience and whether they have suffered from a past workplace injury. The findings of this study may offer a better understanding of workers’ behavioural patterns in construction environment and the effectiveness of safety interventions. The result of this study may provide supports for designing, implementing and evaluating safety interventions in construction site.

Dynamic load-sharing of longitudinal-connected air suspensions of a tri-axle semi-trailer

The effects of suspension parameters and driving conditions on dynamic load-sharing of longitudinal-connected air suspensions of a tri-axle semi-trailer are investigated in this study. A novel nonlinear model of a multi-axle semi-trailer with longitudinal-connected air suspensions is formulated based on fluid mechanics and thermodynamics and validated through test results. The effects of road surface conditions, driving speeds, air line inside diameter and connector inside diameter on dynamic load-sharing capability of the semi-trailer were analyzed in terms of load-sharing criteria. Simulation results indicate that, when larger air lines and connectors are employed, the DLSC (Dynamic Load-Sharing Coefficient) optimization ratio reaches its peak value when the road roughness is medium. The optimization ratio fluctuates in a complex manner as driving speed increases. The results also indicate that if the air line inside diameter is always assumed to be larger than the connector inside diameter, the influence of air line inside diameter on load-sharing is more significant than that of the connector inside diameter. The proposed approach can be used for further study of the influence of additional factors (such as vehicle load, static absolute air pressure and static height of air spring) on load-sharing and the control methods for multi-axle air suspensions with longitudinal air line.

High-temperature growth of graphene films on copper foils by ethanol chemical vapour deposition

Chemical vapor deposition (CVD) is widely utilized to synthesize graphene with controlled properties for many applications, especially when continuous films over large areas are required. Although hydrocarbons such as methane are quite efficient precursors for CVD at high temperature (∼1000 °C), finding less explosive and safer carbon sources is considered beneficial for the transition to large-scale production. In this work, we investigated the CVD growth of graphene using ethanol, which is a harmless and readily processable carbon feedstock that is expected to provide favorable kinetics. We tested a wide range of synthesis conditions (i.e., temperature, time, gas ratios), and on the basis of systematic analysis by Raman spectroscopy, we identified the optimal parameters for producing highly crystalline graphene with different numbers of layers. Our results demonstrate the importance of high temperature (1070 °C) for ethanol CVD and emphasize the significant effects that hydrogen and water vapor, coming from the thermal decomposition of ethanol, have on the crystal quality of the synthesized graphene.

Awareness of risky behaviour among Chinese drivers

Background In China, as in many developing countries, rapid increases in car ownership and new drivers have been coupled with a large trauma burden. The World Health Organization has identified key risk factors including speeding, drink-driving, helmet and restraint non-use, overloaded vehicles, and fatigued-driving in many rapidly motorising countries, including China. Levels of awareness of these risk factors among road users are not well understood. Although research identifies speeding as the major factor contributing to road crashes in China, there appears to be widespread acceptance of it among the broader community. Purpose To assess self-reported speeding and awareness of crash risk factors among Chinese drivers in Beijing. Methods Car drivers (n=299) were recruited from car washing locations and car parks to complete an anonymous questionnaire. Perceptions of the relative risk of drink-driving, fatigued-driving and speeding, and attitudes towards speeding and self-reported driving speeds were assessed. Results Overall, driving speeds of >10km/hr above posted limits on two road types (60 and 80 km/hour zones) were reported by more than one third of drivers. High-range speeding (i.e., >30 km/hour in a 60 km/hour zone and >40 km/hour in an 80 km/hour zone) was reported by approximately 5% of the sample. Attitudinal measures indicated that approximately three quarters of drivers reported attitudes that were not supportive of speeding. Drink-driving was identified as the most risky behaviour; 18% reported the perception that drink-driving had the same level of danger as speeding and 82% reported it as more dangerous. For fatigued-driving, 1% reported the perception that it was not as dangerous as speeding; 27.4% reported it as the same level and 71.6% perceived it as more dangerous. Conclusion Driving speeds well above posted speed limits were commonly reported by drivers. Speeding was rated as the least dangerous on-road behaviour, compared to drink-driving and fatigued-driving. One third of drivers reported regularly engaging in speeds at least 10km/hr above posted limits, despite speeding being the major reported contributor to crashes. Greater awareness of the risks associated with speeding is needed to help reduce the road trauma burden in China and promote greater speed limit compliance.

Point-to-point speed enforcement : recommendations for better practice

Point-to-point speed cameras are a relatively new and innovative technological approach to speed enforcement that is increasingly been used in a number of highly motorised countries. Previous research has provided evidence of the positive impact of this approach on vehicle speeds and crash rates, as well as additional traffic related outcomes such as vehicle emissions and traffic flow. This paper reports on the conclusions and recommendations of a large-scale project involving extensive consultation with international and domestic (Australian) stakeholders to explore the technological, operational, and legislative characteristics associated with the technology. More specifically, this paper provides a number of recommendations for better practice regarding the implementation of point-to-point speed enforcement in the Australian and New Zealand context. The broader implications of the research, as well as directions for future research, are also discussed.

Rapid yet accurate speech indexing using dynamic match lattice spotting

The support for typically out-of-vocabulary query terms such as names, acronyms, and foreign words is an important requirement of many speech indexing applications. However, to date many unrestricted vocabulary indexing systems have struggled to provide a balance between good detection rate and fast query speeds. This paper presents a fast and accurate unrestricted vocabulary speech indexing technique named Dynamic Match Lattice Spotting (DMLS). The proposed method augments the conventional lattice spotting technique with dynamic sequence matching, together with a number of other novel algorithmic enhancements, to obtain a system that is capable of searching hours of speech in seconds while maintaining excellent detection performance

A Guide to Applying Road Safety within a Workplace : A Bilateral Approach to Organisational Road Safety in Australia and New Zealand

Corporate and organisational fleet and road safety is of strong interest to government and government agencies in Australia and New Zealand. It has been identified that there is great opportunity to engage and assist organisations and corporations in the delivery of road safety and road safety measures to achieve nationally significant road related trauma reductions. This guide has therefore been developed through public sector funding for use by any workplace within Australia and New Zealand. Significant road safety benefits can be achieved by road safety government agencies (Australia and New Zealand) that engage with private and public sectors at their workplaces to address work related road safety issues. It has also been noted that organisational road safety advancement creates effective and sustainable outcomes, safer places of employment, and safer communities. This can be achieved without totally relying upon traditional and often lengthy processes such as further public legislation and/ or community attitudinal and behavioural change programs. Currently, there is little in the way of robust guides or support for those organisations that are wishing to adopt road safety within their places of employment, supply chain and/ or community. Due to this identified gap in available resource and support, it has been recommended that a practical organisational road safety guide be produced; hence the development of this guide. A guide, or supporting documentation, that bridges the gap between government and road safety research knowledge, internationally endorsed road safety methodology, and assists industry as the end user. To achieve this, the guide is designed to be non-specific to any industry sector and usable for small or large organisations, public or private, and engaging for senior executives and the personnel on the ground responsible for its implementation. Therefore, this guide is based on methodology and principles so that it can be applicable in a scalable way to the greatest number of public and private organisations while providing enough detail and ‘how to’ advice to enable organisations to generate their own solutions to road safety issues.

Enhanced locomotion control for a planetary rover

This article presents an approach to improve and monitor the behavior of a skid-steering rover on rough terrains. An adaptive locomotion control generates speeds references to avoid slipping situations. An enhanced odometry provides a better estimation of the distance travelled. A probabilistic classification procedure provides an evaluation of the locomotion efficiency on-line, with a detection of locomotion faults. Results obtained with a Marsokhod rover are presented throughout the paper

Physiological tolerance times while wearing explosive ordnance disposal protective clothing in simulated environmental extremes

Explosive ordnance disposal (EOD) technicians are required to wear protective clothing to protect themselves from the threat of overpressure, fragmentation, impact and heat. The engineering requirements to minimise these threats results in an extremely heavy and cumbersome clothing ensemble that increases the internal heat generation of the wearer, while the clothing’s thermal properties reduce heat dissipation. This study aimed to evaluate the heat strain encountered wearing EOD protective clothing in simulated environmental extremes across a range of differing work intensities. Eight healthy males [age 25±6 years (mean ± sd), height 180±7 cm, body mass 79±9 kg, V˙O2max 57±6 ml.kg−1.min−1] undertook nine trials while wearing an EOD9 suit (weighing 33.4 kg). The trials involved walking on a treadmill at 2.5, 4 and 5.5 km⋅h−1 at each of the following environmental conditions, 21, 30 and 37°C wet bulb globe temperature (WBGT) in a randomised controlled crossover design. The trials were ceased if the participants’ core temperature reached 39°C, if heart rate exceeded 90% of maximum, if walking time reached 60 minutes or due to fatigue/nausea. Tolerance times ranged from 10–60 minutes and were significantly reduced in the higher walking speeds and environmental conditions. In a total of 15 trials (21%) participants completed 60 minutes of walking; however, this was predominantly at the slower walking speeds in the 21°C WBGT environment. Of the remaining 57 trials, 50 were ceased, due to attainment of 90% maximal heart rate. These near maximal heart rates resulted in moderate-high levels of physiological strain in all trials, despite core temperature only reaching 39°C in one of the 72 trials.