998 resultados para resistance welding
Resumo:
Dissertação para obtenção do Grau de Mestre em Genética Molecular e Biomedicina
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do Grau de Mestre em Engenharia Mecânica
Resumo:
International RILEM Workshop on Repairs Mortars for Historic Masonry, Technical University of Delft, 2009
Resumo:
Dissertação para obtenção do Grau de Mestre em Biotecnologia
Resumo:
We report for the first time a patient with malaria due to Plasmodium vivax who showed R2 resistance to chloroquine and R3 resistance to mefloquine in the Brazilian Amazon region based on WHO clinical criteria for diagnosis of malaria resistance. Failure was observed with unsupervised oral chloroquine, chloroquine under rigorous supervision and mefloquine in the same scheme. Finally, the patient was cured with oral artesunate.
Resumo:
A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics
Resumo:
The objective of the present study was to investigate the frequency and risk factors for developing multidrug-resistant tuberculosis in Cabo de Santo Agostinho, PE. This was a prospective study conducted from 2000 to 2003, in which suspected cases were investigated using bacilloscopy and culturing. Out of 232 confirmed cases of tuberculosis, culturing and antibiotic susceptibility tests were performed on 174. Thirty-five of the 174 cultures showed resistance to all drugs. The frequencies of primary and acquired resistance to any drug were 14% and 50% respectively, while the frequencies of primary and acquired multidrug resistance were 8.3% and 40%. Previous tuberculosis treatment and abandonment of treatment were risk factors for drug resistance. The high levels of primary and acquired resistance to the combination of isoniazid and rifampicin contributed towards the difficulties in controlling tuberculosis transmission in the city.
Resumo:
Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.
Resumo:
INTRODUCTION: Lamivudine is a nucleoside analogue that is used clinically for treating chronic hepatitis B infection. However, the main problem with prolonged use of lamivudine is the development of viral resistance to the treatment. Mutations in the YMDD motif of the hepatitis B virus DNA polymerase gene have been associated with resistance to drug therapy. So far, there have not been many studies in Brazil reporting on genotype-dependent development of resistance to lamivudine. Thus, the aim of the present study was to determine the possible correlation between a certain genotype and increased development of resistance to lamivudine among chronic hepatitis B patients. METHODS: HBV DNA in samples from 50 patients under lamivudine treatment was amplified by means of conventional PCR. Samples were collected at Hospital das Clínicas, FMRP-USP. The products were then sequenced and phylogenetic analysis was performed. RESULTS: Phylogenetic analysis revealed that 29 (58%) patients were infected with genotype D, 20 (40%) with genotype A and one (2%) with genotype F. Mutations in the YMDD motif occurred in 20% of the patients with genotype A and 27.6% of the patients with genotype D. CONCLUSIONS: Despite the small number of samples, our results indicated that mutations in the YMDD motif were 1.38 times more frequent in genotype D than in genotype A.
Resumo:
INTRODUCTION: Listeria monocytogenes is a ubiquitous microorganism in nature and is responsible for listeriosis, an infectious disease caused by consumption of contaminated food. METHODS: Molecular characterization was performed on 19 strains of Listeria monocytogenes (serovars 1/2a, 1/2b, 4b and 4c), isolated from dairy products in Rio Grande do Sul, Brazil. The molecular techniques applied were random amplification of polymorphic DNA and restriction enzyme analysis. In addition to the molecular analysis, the antimicrobial resistance profile was determined. RESULTS: The strains studied showed a low degree of diversity. In relation to the antimicrobial resistance profile of those microorganisms from the samples analyzed, all of them were susceptible to the antimicrobials tested. CONCLUSIONS: The molecular techniques that were used presented good discriminatory power for the strains studied. Furthermore, all of the samples that were analyzed were susceptible to the antimicrobials tested.
Resumo:
INTRODUCTION: In the past two decades members of the genus Enterococcus have emerged as important nosocomial pathogens worldwide. This study prospectively analyzed the distribution of species and trends in antimicrobial resistance among clinical isolates of enterococci in a Brazilian tertiary hospital from 2006-2009. METHODS: Enterococcal species were identified by conventional biochemical tests. The antimicrobial susceptibility profile was performed by disk diffusion in accordance with the Clinical and Laboratory Standards Institute (CLSI). A screening test for vancomycin was also performed. Minimal inhibitory concentration (MIC) for vancomycin was determined using the broth dilution method. Molecular assays were used to confirm speciation and genotype of vancomycin-resistant enterococci (VRE). RESULTS: A total of 324 non-repetitive enterococcal isolates were recovered, of which 87% were E. faecalis and 10.8% E. faecium. The incidence of E. faecium per 1,000 admissions increased significantly (p < 0.001) from 0.3 in 2006 to 2.3 in 2009. The VRE rate also increased over time from 2.5% to 15.5% (p < 0.001). All VRE expressed high-level resistance to vancomycin (MIC >256µg/ mL) and harbored vanA genes. The majority (89.5%) of VRE belonged to E. faecium species, which were characteristically resistant to ampicillin and quinolones. Overall, ampicillin resistance rate increased significantly from 2.5% to 21.4% from 2006-2009. Resistance rates for gentamicin, chloramphenicol, tetracycline, and erythromycin significantly decreased over time, although they remained high. Quinolones resistance rates were high and did not change significantly over time. CONCLUSIONS: The data obtained show a significant increasing trend in the incidence of E. faecium resistant to ampicillin and vancomycin.
Resumo:
INTRODUCTION: Shigella spp. are Gram-negative, nonsporulating, rod-shaped bacteria that belong to the family Enterobacteriaceae and are responsible for shigellosis or bacillary dysentery, an important cause of worldwide morbidity and mortality. METHODS: We studied the antibiotic resistance profiles of 122 Shigella spp. strains (81 S. flexneri, 41 S. sonnei, 1 S. boydii) isolated from patients (female and male from 0 to 80 years of age) presenting diarrhea in different districts of the State of Pará, in the North of Brazil. The antibiotic resistance of the strains, isolated from human fecal samples, was determined by the diffusion disk method and by using the VITEK-2 system. RESULTS: The highest resistance rate found was the resistance rate to tetracycline (93.8%), followed by the resistance rate to chloramphenicol (63.9%) and to trimethoprim/sulfamethoxazole (63.1%). Resistance to at least three drugs was more common among S. flexneri than S. sonnei (39.5% vs. 10%). Six (4.9%) strains were susceptible to all the antibiotics tested. All strains were susceptible to cefotaxime, ceftazidime, ciprofloxacin, nalidixic acid and nitrofurantoin. CONCLUSIONS: High rates of multidrug resistance in Shigella spp. are a serious public health concern in Brazil. It is extremely important to continuously monitor the antimicrobial resistances of Shigella spp. for effective therapy and control measures against shigellosis.
Resumo:
Double Degree.
Resumo:
INTRODUCTION: The aim of this work was to evaluate the prevalence of Mycobacterium tuberculosis (MT) strains with mutations that could result in resistance to the main drugs used in treatment in a region with one of the highest numbers of tuberculosis (TB) cases in southern Brazil. METHODS: Deoxyribonucleic acid (DNA) from 120 sputum samples from different patients suspicious of pulmonary tuberculosis who attended the Municipal Public Laboratory for Mycobacterium sp. diagnosis was directly amplified and analyzed by PCR-SSCP. The DNA was amplified in known hotspot mutation regions of the genes rpoB, ahpC, embB, katG, inhA, and pncA. RESULTS: The percentage of samples positive by culture was 9.2% (11/120); 5% (6/120) were positive by bacilloscopy and MT-PCR, and DNA fragments of the aforementioned resistance genes could be amplified from seven (7) of the eleven (11) samples with positive results, either by culture or PCR/bacilloscopy. All presented a SSCP pattern similar to a native, nonresistant genotype, with the ATCC strain 25177 as control, except for one sample (0.01%), which presented a SSCP profile demonstrating mutation at the embB gene. CONCLUSIONS: These results are consistent with the empirical observations by physicians treating TB patients in our region of a low occurrence of cases that are refractory to conventional treatment schemes, in contrast to other parts of the country. Continued surveillance, especially molecular, is essential to detect and monitor the outbreak of MT-resistant strains.