Design, modeling and construction of a novel ablative fast pyrolysis reactor and product collection system

The objective of this work was to design, construct and commission a new ablative pyrolysis reactor and a high efficiency product collection system. The reactor was to have a nominal throughput of 10 kg/11r of dry biomass and be inherently scalable up to an industrial scale application of 10 tones/hr. The whole process consists of a bladed ablative pyrolysis reactor, two high efficiency cyclones for char removal and a disk and doughnut quench column combined with a wet walled electrostatic precipitator, which is directly mounted on top, for liquids collection. In order to aid design and scale-up calculations, detailed mathematical modelling was undertaken of the reaction system enabling sizes, efficiencies and operating conditions to be determined. Specifically, a modular approach was taken due to the iterative nature of some of the design methodologies, with the output from one module being the input to the next. Separate modules were developed for the determination of the biomass ablation rate, specification of the reactor capacity, cyclone design, quench column design and electrostatic precipitator design. These models enabled a rigorous design protocol to be developed capable of specifying the required reactor and product collection system size for specified biomass throughputs, operating conditions and collection efficiencies. The reactor proved capable of generating an ablation rate of 0.63 mm/s for pine wood at a temperature of 525 'DC with a relative velocity between the heated surface and reacting biomass particle of 12.1 m/s. The reactor achieved a maximum throughput of 2.3 kg/hr, which was the maximum the biomass feeder could supply. The reactor is capable of being operated at a far higher throughput but this would require a new feeder and drive motor to be purchased. Modelling showed that the reactor is capable of achieving a reactor throughput of approximately 30 kg/hr. This is an area that should be considered for the future as the reactor is currently operating well below its theoretical maximum. Calculations show that the current product collection system could operate efficiently up to a maximum feed rate of 10 kg/Fir, provided the inert gas supply was adjusted accordingly to keep the vapour residence time in the electrostatic precipitator above one second. Operation above 10 kg/hr would require some modifications to the product collection system. Eight experimental runs were documented and considered successful, more were attempted but due to equipment failure had to be abandoned. This does not detract from the fact that the reactor and product collection system design was extremely efficient. The maximum total liquid yield was 64.9 % liquid yields on a dry wood fed basis. It is considered that the liquid yield would have been higher had there been sufficient development time to overcome certain operational difficulties and if longer operating runs had been attempted to offset product losses occurring due to the difficulties in collecting all available product from a large scale collection unit. The liquids collection system was highly efficient and modeling determined a liquid collection efficiency of above 99% on a mass basis. This was validated due to the fact that a dry ice/acetone condenser and a cotton wool filter downstream of the collection unit enabled mass measurements of the amount of condensable product exiting the product collection unit. This showed that the collection efficiency was in excess of 99% on a mass basis.

Developmental commonalities between object and face recognition in adolescence

In the visual perception literature, the recognition of faces has often been contrasted with that of non-face objects, in terms of differences with regard to the role of parts, part relations and holistic processing. However, recent evidence from developmental studies has begun to blur this sharp distinction. We review evidence for a protracted development of object recognition that is reminiscent of the well-documented slow maturation observed for faces. The prolonged development manifests itself in a retarded processing of metric part relations as opposed to that of individual parts and offers surprising parallels to developmental accounts of face recognition, even though the interpretation of the data is less clear with regard to holistic processing. We conclude that such results might indicate functional commonalities between the mechanisms underlying the recognition of faces and non-face objects, which are modulated by different task requirements in the two stimulus domains.

Quantifying the effects of temperature and concentration on variable-density flow in numerical modeling of groundwater systems: Implications for predictive uncertainty and data collection

Groundwater systems of different densities are often mathematically modeled to understand and predict environmental behavior such as seawater intrusion or submarine groundwater discharge. Additional data collection may be justified if it will cost-effectively aid in reducing the uncertainty of a model's prediction. The collection of salinity, as well as, temperature data could aid in reducing predictive uncertainty in a variable-density model. However, before numerical models can be created, rigorous testing of the modeling code needs to be completed. This research documents the benchmark testing of a new modeling code, SEAWAT Version 4. The benchmark problems include various combinations of density-dependent flow resulting from variations in concentration and temperature. The verified code, SEAWAT, was then applied to two different hydrological analyses to explore the capacity of a variable-density model to guide data collection. ^ The first analysis tested a linear method to guide data collection by quantifying the contribution of different data types and locations toward reducing predictive uncertainty in a nonlinear variable-density flow and transport model. The relative contributions of temperature and concentration measurements, at different locations within a simulated carbonate platform, for predicting movement of the saltwater interface were assessed. Results from the method showed that concentration data had greater worth than temperature data in reducing predictive uncertainty in this case. Results also indicated that a linear method could be used to quantify data worth in a nonlinear model. ^ The second hydrological analysis utilized a model to identify the transient response of the salinity, temperature, age, and amount of submarine groundwater discharge to changes in tidal ocean stage, seasonal temperature variations, and different types of geology. The model was compared to multiple kinds of data to (1) calibrate and verify the model, and (2) explore the potential for the model to be used to guide the collection of data using techniques such as electromagnetic resistivity, thermal imagery, and seepage meters. Results indicated that the model can be used to give insight to submarine groundwater discharge and be used to guide data collection. ^

Data and Documentation

The primary aims of this survey were to assess household waste management practices; participation in waste diversion practices; knowledge of local waste management politics; willingness to participate in local decision making regarding the development of a local waste processing facility; attitudes and perceptions of waste, waste management policies, and waste management technologies.

Developing a Theory of Pervasive Information Capture, Processing, Visualization and Documentation

Developing a theoretical framework for pervasive information environments is an enormous goal. This paper aims to provide a small step towards such a goal. The following pages report on our initial investigations to devise a framework that will continue to support locative, experiential and evaluative data from ‘user feedback’ in an increasingly pervasive information environment. We loosely attempt to outline this framework by developing a methodology capable of moving from rapid-deployment of software and hardware technologies, towards a goal of realistic immersive experience of pervasive information. We propose various technical solutions and address a range of problems such as; information capture through a novel model of sensing, processing, visualization and cognition.

RESULTS OF THE SELF-ASSESSMENT AND DOCUMENTATION LIBRARY CAREER WITH A VIEW TO THE REACREDITATION, 2008

Succinctly defines the terms "accreditation" and "recertification" in order to locate the reader (a) on the theme to develop. Also describes the process of self-assessment of Librarianship and Documentation Race towards the re-accreditation, focusing primarily on results obtained in the development of self-evaluation reports of the various sectors that make up the School. Finally, presents some conclusions both about the overall process of the various reports as described.

Civil service reform : development of 1978 civil service reform proposals : transcript of a seminar held jointly by GAO and the Senate Governmental Affairs Subcommittee on Federal Services, Post Office, and Civil Service on March 31, 1988 /

"GAO/GGD-89-18."

Teaching Library and Documentation at the School of Librarianship, Documentation and Information of the National University

The key to graduate professionals with sufficient capacity to meet the research demands of users, should be the vision and the commissioning of schools and their academic library. All these efforts must be linked systematically to ensure the use of data recorded on their knowledge and information units.

Reaccreditation ceremony of the career of Library and Documentation of the National University

This section presents information on the delivery ceremony of the official certificate of reaccreditation, by the SINAES, to the career of Diploma, Bachelor (with the following two emphases: Information Management, Information Technology and Communication) and Bachelor of Library and Documentation, held last March 3, 2011. It includes some of the speeches delivered that night, and several photographs illustrating such an important event for both the School of Library and to the university community.

EU-North Africa relations in cross-border law enforcement: new legal challenges for the EU in the post-Lisbon and post-Stockholm era

The Stockholm Programme, allied to the Lisbon Treaty, heralds a new era of development of the EU provisions on cross-border law enforcement. The focus is shifting from the ongoing internal EU developments to the external relations of the EU. Many North African countries have had long legal relationships with the EU through the Euro-Mediterranean Partnerships. A number of these partnership agreements make express references, at the political level, to the development of cross-border law enforcement provision, as is the case of Morocco and Algeria with regard to drug trafficking and manufacture, or the lengthy references by Egypt to many of the crimes of interest to the EU’s own law enforcement legal framework. Algeria is currently focusing on modernising their own police forces, with both Algeria and Tunisia, reforming their criminal judicial frameworks. Another key player, Libya, currently has no legal agreements with the EU, and at least until the recent conflict, maintained an observer status in the Euro-Mediterranean process. At a practitioner level, the European Police College (CEPOL) is currently involved in the Euromed Police II programme. Clearly momentum is developing, both within the EU and from a number of Euro-Med North African countries to develop closer law enforcement co-operation. This may well develop further with the recent changes in governments of a number of North African countries. The EU approach in the Police and Judicial Cooperation in Criminal Matters (PJCCM) policy area is to develop a legal framework upon which EU cross-border law enforcement will be based. The current EU cross-border law enforcement framework is the product of many years of multi-level negotiations. Challenges will arise as new countries from different legal and policing traditions will attempt to engage with already highly detailed legal and practice frameworks. The shared European legal traditions will not necessarily be reflected in the North African countries. This chapter critically analyses, from an EU legal perspective the problems and issues that will be encountered as the EU’s North African partner countries attempt to articulate into the existing, and still developing EU cross-border law enforcement framework.

La collaboration interprofessionnelle à l'interface des institutions socio-éducative et psychiatrique. Jeux et enjeux de l'intervention auprès de personnes en situation de handicap mental et de troubles psychiques

La prise en charge et le suivi de personnes en situation de handicap mental souffrant de troubles psychiques et se trouvant donc à l'interface des domaines socio:éducatif et psychiatrique, constituent des défis complexes en matière de collaboration interprofessionnelle. Dans le canton de Vaud, les acteurs concernés par ce problème s'efforcent depuis de nombreuses années de créer des réseaux pluridisciplinaires visant un meilleur échange entre professionnels et le développement de compétences et de connaissances permettant d'améliorer le bien:être des bénéficiaires. Ce travail se propose ainsi d'étudier et de questionner ces modalités de travail dans une perspective socioculturelle (Vygotski, 1934/1997), afin d'en comprendre le fonctionnement, d'en éclairer les mécanismes et de fournir des pistes de réflexion aux professionnels. Il repose sur un travail de terrain mené auprès des membres du Dispositif de Collaboration Psychiatrie Handicap Mental (DCPHM) du Département de psychiatrie du CHUV, dont la mission principale est de faciliter la collaboration entre les institutions socio:éducatives et psychiatriques spécialisées dans le suivi des personnes en situation de handicap mental et souffrant de troubles psychiques. Le travail empirique est basé sur une approche qualitative et compréhensive des interactions sociales, et procède par une étude de terrain approfondie. Les données recueillies sont variées : notes de terrain et récolte de documentation, enregistrement de réunions d'équipe au sein du DCPHM et de réunions de réseau, et entretiens de différents types. L'analyse montre que le travail de collaboration qui incombe à l'équipe est constitué d'obstacles qui sont autant d'occasions de développement professionnel et de construction identitaire. Les résultats mettent en lumière des mécanismes discursifs de catégorisation concourant à la fois à la construction des patients comme objets d'activité, et à la construction d'une place qui légitime les interventions de l'équipe dans le paysage socio:éducatif et psychiatrique vaudois et la met au centre de l'arène professionnelle. -- Care and follow:up for people with mental disabilities suffering from psychological disorders : therefore at the interface between the socio:educational and psychiatric fields : represent complex challenges in terms of interprofessional collaboration. In the canton of Vaud, the caregivers involved in this issue have been trying for years to build multidisciplinary networks in order to better exchange between professionals and develop skills and knowledge to improve the recipients' well:being. This work thus proposes to study and question these working methods in a sociocultural perspective (Vygotski, 1934/1997) so as to understand how they operate, highlight inherent mechanisms and provide actionable insights to the professionals. It is based on fieldwork conducted among members of the Dispositif de Collaboration Psychiatrie Handicap Mental (DCPHM), of the Psychiatry Department at the CHUV University Hospital in Lausanne, whose main mission is to facilitate collaboration between the socio:educational and psychiatric institutions specialising in monitoring people presenting with both mental handicap and psychiatric disorder. The empirical work is based on a qualitative and comprehensive approach to social interactions, and conducted based on an in:depth field study. The data collected are varied - field notes and documentation collection, recordings of team meetings within the DCPHM and network meetings, and various types of interviews. The analysis shows that the collaborative work that befalls the team consists of obstacles, all of which provide opportunities for professional development and identity construction. The results highlight discursive strategies of categorisation which contribute both to the construction of the patients as objects of activity and to building a position that legitimates the team's interventions in the socio: educational and psychiatric landscape of canton Vaud and puts it in the centre of the professional arena.

Application of 3D documentation and geometric reconstruction methods in traffic accident analysis: with high resolution surface scanning, radiological MSCT/MRI scanning and real data based animation

The examination of traffic accidents is daily routine in forensic medicine. An important question in the analysis of the victims of traffic accidents, for example in collisions between motor vehicles and pedestrians or cyclists, is the situation of the impact. Apart from forensic medical examinations (external examination and autopsy), three-dimensional technologies and methods are gaining importance in forensic investigations. Besides the post-mortem multi-slice computed tomography (MSCT) and magnetic resonance imaging (MRI) for the documentation and analysis of internal findings, highly precise 3D surface scanning is employed for the documentation of the external body findings and of injury-inflicting instruments. The correlation of injuries of the body to the injury-inflicting object and the accident mechanism are of great importance. The applied methods include documentation of the external and internal body and the involved vehicles and inflicting tools as well as the analysis of the acquired data. The body surface and the accident vehicles with their damages were digitized by 3D surface scanning. For the internal findings of the body, post-mortem MSCT and MRI were used. The analysis included the processing of the obtained data to 3D models, determination of the driving direction of the vehicle, correlation of injuries to the vehicle damages, geometric determination of the impact situation and evaluation of further findings of the accident. In the following article, the benefits of the 3D documentation and computer-assisted, drawn-to-scale 3D comparisons of the relevant injuries with the damages to the vehicle in the analysis of the course of accidents, especially with regard to the impact situation, are shown on two examined cases.

Loss estimation for landslides in mountain areas – An integrated toolbox for vulnerability assessment and damage documentation

Global environmental change includes changes in a wide range of global scale phenomena, which are expected to affect a number of physical processes, as well as the vulnerability of the communities that will experience their impact. Decision-makers are in need of tools that will enable them to assess the loss of such processes under different future scenarios and to design risk reduction strategies. In this paper, a tool is presented that can be used by a range of end-users (e.g. local authorities, decision makers, etc.) for the assessment of the monetary loss from future landslide events, with a particular focus on torrential processes. The toolbox includes three functions: a) enhancement of the post-event damage data collection process, b) assessment of monetary loss of future events and c) continuous updating and improvement of an existing vulnerability curve by adding data of recent events. All functions of the tool are demonstrated through examples of its application.

Educational Documentation and its Contribution to Educational Policy. 'La documentación educativa y su contribución a la política educativa'.

Debido a que en la segunda mitad del siglo XX se produjo un incremento importante en el numero de instituciones y personas que se dedican de manera profesional a la investigación en todos los campos de conocimiento, fue necesario un desarrollo de mejores herramientas para sistematizar la información de las investigaciones y hacerla más accesible. Es por eso que surgen las bases de datos o bancos de datos. El texto se centra en la definición, tipos, características, planeación, diseño y desarrollo de estas bases de datos.