Why is the cladoceran Simocephalus vetulus (Müller) not a 'bang-bang strategist '? A critique of the optimal-body-size model

Lynch's (1980a) optimal-body-size model is designed to explain some major trends in cladoceran life histories; in particular the fact that large and littoral species seem to be bang-bang strategists (they grow first and the reproduce) whereas smaller planktonic species seem to be intermediate strategists (they grow and reproduce simultaneously). Predation is assumed to be an important selective pressure for these trends. Simocephalus vetulus (Müller) does not fit this pattern; being a littoral and relatively large species but an intermediate strategist. As shown by computer simulations, this species would reduce its per capita rate of increase by adopting the strategy predicted by the optimal-body-size model. Two aspects of the model are criticized: (1) the optimization criterion is shown to be incorrect and (2) the prediction of an intermediate strategy is not justified. Structural constraints are suggested to be responsible for the intermediate strategy of S.vetulus. Biotic interactions seem to have little effect on the observed life-history patterns of this species.

Optimal priming of poxvirus vector (NYVAC)-based HIV vaccine regimens requires 3 DNA injections. Results of the EV03/ANRS Vac20 Phase I/II Trial

Background: Two or three DNA primes have been used in previous smaller clinical trials, but the number required for optimal priming of viral vectors has never been assessed in adequately powered clinical trials. The EV03/ANRS Vac20 phase I/II trial investigated this issue using the DNA prime/poxvirus NYVAC boost combination, both expressing a common HIV-1 clade C immunogen consisting of Env and Gag-Pol-Nef polypeptide. Methods: 147 healthy volunteers were randomly allocated through 8 European centres to either 3xDNA plus 1xNYVAC (weeks 0, 4, 8 plus 24; n¼74) or to 2xDNA plus 2xNYVAC (weeks 0, 4 plus 20, 24; n¼73), stratified by geographical region and sex. T cell responses were quantified using the interferon g Elispot assay and 8 peptide pools; samples from weeks 0, 26 and 28 (time points for primary immunogenicity endpoint), 48 and 72 were considered for this analysis. Results: 140 of 147 participants were evaluable at weeks 26 and/ or 28. 64/70 (91%) in the 3xDNA arm compared to 56/70 (80%) in the 2xDNA arm developed a T cell response (P¼0.053). 26 (37%) participants of the 3xDNA arm developed a broader T cell response (Env plus at least to one of the Gag, Pol, Nef peptide pools) versus 15 (22%) in the 2xDNA arm (P¼0.047). At week 26, the overall magnitude of responses was also higher in the 3xDNA than in the 2xDNA arm (similar at week 28), with a median of 545 versus 328 SFUs/106 cells at week 26 (P<0.001). Preliminary overall evaluation showed that participants still developed T-cell response at weeks 48 (78%, n¼67) and 72 (70%, n¼66). Conclusion: This large clinical trial demonstrates that optimal priming of poxvirus-based vaccine regimens requires 3 DNA regimens and further confirms that the DNA/NYVAC prime boost vaccine combination is highly immunogenic and induced durable T-cell responses.

Continuous determination of optimal cerebral perfusion pressure in traumatic brain injury.

OBJECTIVES: We have sought to develop an automated methodology for the continuous updating of optimal cerebral perfusion pressure (CPPopt) for patients after severe traumatic head injury, using continuous monitoring of cerebrovascular pressure reactivity. We then validated the CPPopt algorithm by determining the association between outcome and the deviation of actual CPP from CPPopt. DESIGN: Retrospective analysis of prospectively collected data. SETTING: Neurosciences critical care unit of a university hospital. PATIENTS: A total of 327 traumatic head-injury patients admitted between 2003 and 2009 with continuous monitoring of arterial blood pressure and intracranial pressure. MEASUREMENTS AND MAIN RESULTS: Arterial blood pressure, intracranial pressure, and CPP were continuously recorded, and pressure reactivity index was calculated online. Outcome was assessed at 6 months. An automated curve fitting method was applied to determine CPP at the minimum value for pressure reactivity index (CPPopt). A time trend of CPPopt was created using a moving 4-hr window, updated every minute. Identification of CPPopt was, on average, feasible during 55% of the whole recording period. Patient outcome correlated with the continuously updated difference between median CPP and CPPopt (chi-square=45, p<.001; outcome dichotomized into fatal and nonfatal). Mortality was associated with relative "hypoperfusion" (CPP<CPPopt), severe disability with "hyperperfusion" (CPP>CPPopt), and favorable outcome was associated with smaller deviations of CPP from the individualized CPPopt. While deviations from global target CPP values of 60 mm Hg and 70 mm Hg were also related to outcome, these relationships were less robust. CONCLUSIONS: Real-time CPPopt could be identified during the recording time of majority of the patients. Patients with a median CPP close to CPPopt were more likely to have a favorable outcome than those in whom median CPP was widely different from CPPopt. Deviations from individualized CPPopt were more predictive of outcome than deviations from a common target CPP. CPP management to optimize cerebrovascular pressure reactivity should be the subject of future clinical trial in severe traumatic head-injury patients.

Optimal beef cattle management under agricultural policy reforms in Finland

Selostus: Politiikkamuutosten vaikutus lihanautojen optimaaliseen ruokintaan ja teurastuksen ajoitukseen

Optimal culture incubation time in orthopedic device-associated infections: a retrospective analysis of prolonged 14-day incubation.

Accurate diagnosis of orthopedic device-associated infections can be challenging. Culture of tissue biopsy specimens is often considered the gold standard; however, there is currently no consensus on the ideal incubation time for specimens. The aim of our study was to assess the yield of a 14-day incubation protocol for tissue biopsy specimens from revision surgery (joint replacements and internal fixation devices) in a general orthopedic and trauma surgery setting. Medical records were reviewed retrospectively in order to identify cases of infection according to predefined diagnostic criteria. From August 2009 to March 2012, 499 tissue biopsy specimens were sampled from 117 cases. In 70 cases (59.8%), at least one sample showed microbiological growth. Among them, 58 cases (82.9%) were considered infections and 12 cases (17.1%) were classified as contaminations. The median time to positivity in the cases of infection was 1 day (range, 1 to 10 days), compared to 6 days (range, 1 to 11 days) in the cases of contamination (P < 0.001). Fifty-six (96.6%) of the infection cases were diagnosed within 7 days of incubation. In conclusion, the results of our study show that the incubation of tissue biopsy specimens beyond 7 days is not productive in a general orthopedic and trauma surgery setting. Prolonged 14-day incubation might be of interest in particular situations, however, in which the prevalence of slow-growing microorganisms and anaerobes is higher.

Optimal CD8 T cell responsiveness is controlled within a defined TCR affinity window

Protective immune responses relyon TCR-mediated recognition of antigenspresented by MHC molecules. Tcells directed against tumor antigensare thought to express TCRs of loweraffinity/avidity than pathogen-specificT lymphocytes. An attractivestrategy to improve anti-tumor T cellresponses is to adoptively transferCD8+ T cells engineered with TCRsof optimized affinity. However, themechanisms that control optimal Tcell activation and responsiveness remainpoorly defined. We aim at characterizingTCR-pMHC binding parametersand downstream signalingevents that regulate T cell functionalityby using an in silico designedpanel of tumor antigen-specific TCRsof incremental affinity for pMHC(Kd100 M- 15 nM).We found that optimalT cell responses (cytokine secretionand target cell killing) occurredwithin a well-defined window ofTCR-pMHC binding affinity (5 M-1 M), while drastic functional declinewas detected in T cells expressingvery low and very high TCRaffinities,which was not caused by any increasein apoptosis. Whole-genomemicroarray analysis revealed that Tcells with optimal TCR affinitieshighly up-regulated transcription ofgenes typical of T cell activation (i.e.IFN-, NF-B and TNFR), while reducedexpression was detected in Tcells of very low or very high TCR affinity.Strikingly, hierarchical clusteringshowed that the latter two variantsclustered together with the un-stimulatedcontrol Tcells.Yet, despite commonclustering, several genes seemedto be differentially expressed, suggestingthat the mechanisms involvedin this "unresponsiveness state" maydiffer between those two variants. Finally,calcium influx assays also demonstratedattenuated responses in Tcells of very high TCR affinity. Ourresults indicate that optimal T cellfunction is tightly controlled within adefinedTCRaffinity window throughvery proximal TCR-mediated mechanisms,possibly at the TCR-pMHCbinding interface. Uncovering themechanisms regulating optimal/maximalT cell function is essential to understandand promote therapeutic designlike adoptive T cell therapy.

Optimal stop-loss reinsurance: a dependence analysis

The stop-loss reinsurance is one of the most important reinsurance contracts in the insurance market. From the insurer point of view, it presents an interesting property: it is optimal if the criterion of minimizing the variance of the cost of the insurer is used. The aim of the paper is to contribute to the analysis of the stop-loss contract in one period from the point of view of the insurer and the reinsurer. Firstly, the influence of the parameters of the reinsurance contract on the correlation coefficient between the cost of the insurer and the cost of the reinsurer is studied. Secondly, the optimal stop-loss contract is obtained if the criterion used is the maximization of the joint survival probability of the insurer and the reinsurer in one period.

On optimal dividend strategies with deficit or incomplete information

Rapport de synthèse Cette thèse consiste en trois essais sur les stratégies optimales de dividendes. Chaque essai correspond à un chapitre. Les deux premiers essais ont été écrits en collaboration avec les Professeurs Hans Ulrich Gerber et Elias S. W. Shiu et ils ont été publiés; voir Gerber et al. (2006b) ainsi que Gerber et al. (2008). Le troisième essai a été écrit en collaboration avec le Professeur Hans Ulrich Gerber. Le problème des stratégies optimales de dividendes remonte à de Finetti (1957). Il se pose comme suit: considérant le surplus d'une société, déterminer la stratégie optimale de distribution des dividendes. Le critère utilisé consiste à maximiser la somme des dividendes escomptés versés aux actionnaires jusqu'à la ruine2 de la société. Depuis de Finetti (1957), le problème a pris plusieurs formes et a été résolu pour différents modèles. Dans le modèle classique de théorie de la ruine, le problème a été résolu par Gerber (1969) et plus récemment, en utilisant une autre approche, par Azcue and Muler (2005) ou Schmidli (2008). Dans le modèle classique, il y a un flux continu et constant d'entrées d'argent. Quant aux sorties d'argent, elles sont aléatoires. Elles suivent un processus à sauts, à savoir un processus de Poisson composé. Un exemple qui correspond bien à un tel modèle est la valeur du surplus d'une compagnie d'assurance pour lequel les entrées et les sorties sont respectivement les primes et les sinistres. Le premier graphique de la Figure 1 en illustre un exemple. Dans cette thèse, seules les stratégies de barrière sont considérées, c'est-à-dire quand le surplus dépasse le niveau b de la barrière, l'excédent est distribué aux actionnaires comme dividendes. Le deuxième graphique de la Figure 1 montre le même exemple du surplus quand une barrière de niveau b est introduite, et le troisième graphique de cette figure montre, quand à lui, les dividendes cumulés. Chapitre l: "Maximizing dividends without bankruptcy" Dans ce premier essai, les barrières optimales sont calculées pour différentes distributions du montant des sinistres selon deux critères: I) La barrière optimale est calculée en utilisant le critère usuel qui consiste à maximiser l'espérance des dividendes escomptés jusqu'à la ruine. II) La barrière optimale est calculée en utilisant le second critère qui consiste, quant à lui, à maximiser l'espérance de la différence entre les dividendes escomptés jusqu'à la ruine et le déficit au moment de la ruine. Cet essai est inspiré par Dickson and Waters (2004), dont l'idée est de faire supporter aux actionnaires le déficit au moment de la ruine. Ceci est d'autant plus vrai dans le cas d'une compagnie d'assurance dont la ruine doit être évitée. Dans l'exemple de la Figure 1, le déficit au moment de la ruine est noté R. Des exemples numériques nous permettent de comparer le niveau des barrières optimales dans les situations I et II. Cette idée, d'ajouter une pénalité au moment de la ruine, a été généralisée dans Gerber et al. (2006a). Chapitre 2: "Methods for estimating the optimal dividend barrier and the probability of ruin" Dans ce second essai, du fait qu'en pratique on n'a jamais toute l'information nécessaire sur la distribution du montant des sinistres, on suppose que seuls les premiers moments de cette fonction sont connus. Cet essai développe et examine des méthodes qui permettent d'approximer, dans cette situation, le niveau de la barrière optimale, selon le critère usuel (cas I ci-dessus). Les approximations "de Vylder" et "diffusion" sont expliquées et examinées: Certaines de ces approximations utilisent deux, trois ou quatre des premiers moments. Des exemples numériques nous permettent de comparer les approximations du niveau de la barrière optimale, non seulement avec les valeurs exactes mais également entre elles. Chapitre 3: "Optimal dividends with incomplete information" Dans ce troisième et dernier essai, on s'intéresse à nouveau aux méthodes d'approximation du niveau de la barrière optimale quand seuls les premiers moments de la distribution du montant des sauts sont connus. Cette fois, on considère le modèle dual. Comme pour le modèle classique, dans un sens il y a un flux continu et dans l'autre un processus à sauts. A l'inverse du modèle classique, les gains suivent un processus de Poisson composé et les pertes sont constantes et continues; voir la Figure 2. Un tel modèle conviendrait pour une caisse de pension ou une société qui se spécialise dans les découvertes ou inventions. Ainsi, tant les approximations "de Vylder" et "diffusion" que les nouvelles approximations "gamma" et "gamma process" sont expliquées et analysées. Ces nouvelles approximations semblent donner de meilleurs résultats dans certains cas.

Optimal use of SSR markers for varietal identification of upland cotton

Abstract: The objective of this work was to identify polymorphic simple sequence repeat (SSR) markers for varietal identification of cotton and evaluation of the genetic distance among the varieties. Initially, 92 SSR markers were genotyped in 20 Brazilian cotton cultivars. Of this total, 38 loci were polymorphic, two of which were amplified by one primer pair; the mean number of alleles per locus was 2.2. The values of polymorphic information content (PIC) and discrimination power (DP) were, on average, 0.374 and 0.433, respectively. The mean genetic distance was 0.397 (minimum of 0.092 and maximum of 0.641). A panel of 96 varieties originating from different regions of the world was assessed by 21 polymorphic loci derived from 17 selected primer pairs. Among these varieties, the mean genetic distance was 0.387 (minimum of 0 and maximum of 0.786). The dendrograms generated by the unweighted pair group method with arithmetic average (UPGMA) did not reflect the regions of Brazil (20 genotypes) or around the world (96 genotypes), where the varieties or lines were selected. Bootstrap resampling shows that genotype identification is viable with 19 loci. The polymorphic markers evaluated are useful to perform varietal identification in a large panel of cotton varieties and may be applied in studies of the species diversity.