Educação tecnológica e pré-sal: necessidades e urgências

O objetivo desta dissertação de mestrado é verificar se a demanda de mão-de-obra com formação no ensino médio técnico para o setor de Petróleo e Gás (P&G) está em consonância com a oferta daquela formação no sistema educacional brasileiro. A metodologia aplicada para obter tal informação foi baseada no Censo Escolar 2000 e 2008, em que os dados foram trabalhados de maneira a explicitar o número de matrículas nos cursos de nível médio técnico, demandados pelo setor de P&G. A demanda de mão-de-obra com aquela qualificação teve como fonte de dados o Plano de Negócios 2010-2014 do Programa de Mobilização da Indústria Nacional de Petróleo e Gás Natural (PROMINP). Este Programa identificou a demanda futura de mão-de-obra para o setor de P&G até 2014, onde as categorias ocupacionais mapeadas possuem pré-requisitos de formação e experiência. Com o intuito de entender melhor o objeto deste estudo foi feita uma revisão de literatura no que diz respeito ao ensino técnico no Brasil, como também a importância da educação para o crescimento econômico e as peculiaridades da economia do petróleo nos diferentes países possuidores daquelas jazidas, ou seja, países subdesenvolvidos e desenvolvidos. As análises demonstraram que as matrículas no ensino técnico no Brasil apresentaram um significativo aumento entre as datas de 2000 a 2008. Traz também como característica a desarmonia com a dinâmica dos setores produtivos da economia, devido principalmente ao aquecimento da economia antes da crise mundial de 2008, e a retomada recente do crescimento notadamente no Setor de Construção Civil, bem como no setor de Petróleo e Gás Natural e Engenharia Naval por conta da descoberta de petróleo na camada Pré-sal. Outro aspecto relevante é que um dos grandes problemas da qualificação de mão-de-obra no Brasil se deve a má qualidade do ensino fundamental e médio, que dificulta para o futuro profissional um bom desempenho nas suas funções laborais e na capacidade de aprender novas funções. A aproximação entre a oferta no sistema educacional e a demanda de mão-de-obra com a formação de nível médio técnico para o setor de P&G, demonstraram que a maioria dos cursos técnicos demandados não apresentava matrículas em 2008, ou possuíam poucas matrículas nos 15 estados com demanda prevista, e aquelas matrículas estavam mal distribuídas entre os estados. A análise aponta para a necessidade de uma política pública que possibilite a adequação do sistema educacional (Ensino Médio Técnico) ao setor de P&G, tanto no que se refere ao número de matrículas e a sua distribuição entre os estados produtores de petróleo quanto no que se refere à especialidade técnica oferecida

Terceirização versus agenda do trabalho decente : estudo de caso a partir do Banco do Brasil s.a. na Paraíba

This Dissertation examines outsourcing in Bank of Brazil SA, the state of Paraiba. The central research question is to what extent this flexibility of labor relations incorporates items claimed by ´recent´ Decent Work Agenda of the International Labour Organization (OIT) or, on the contrary, the ´epidemic´ of outsourcing makes it even more challenging the world of work in the third millennium. The research hypothesis is that the Bank of Brazil has a growing subcontracting / outsourcing of labor (companies and individuals) and that not only contributes to the deterioration of working conditions, but also opposes the Work Agenda decent. Aiming to prove or disprove the hypothesis, the study includes a survey and secondary field. The literature review focuses on the trend towards casualization of labor in capitalism, and yet, in an effort to systematize data and analysis on ´outsourcing´ from the viewpoint of different actors. This theoretical framework is anchored in important classical sources and present that address the topic in the world and in Brazil. The field research was conducted with the actors related to the theme of ´outsourcing´ the Bank of Brazil - Paraiba, precisely branch managers, permanent employees of the bank, union representatives (bank workers), union bank and outsourced. The results confirm, in part, the study hypothesis, by demonstrating that there are several meanings and forms of precariousness that the contractors surveyed are submitted, highlighting the issue of salaries, the work environment, union representation and health worker. All these themes, each for himself, are contemplated by the Decent Work Agenda of the ILO and show, according to field research, rather fragile

A proposta do estado empregador de ultima instância e o experimentalismo democrático: uma reflexão teórica sobre a compatibilidade desses dois programas

This paper aims to make a theoretical reflection on the theoretical compatibility between the program State Employer of Last Resort (ELR) and the Democratic experimentalism (ED). The ED arises in political thought as an alternative to neo-liberal and social democratic programs in order to rescue the discussion about the institutional organization of society and the market economy. About the involuntary unemployment, it proposes tax changes incidents on payroll and proposes work fronts to the most vulnerable or poorly trained. The hypothesis of this paper is that this approach is compatible with the ELR program, the post- Keynesian line. The ELR is presented as transgression of the mainstream of economic thought by proposing that the State acts as guarantor of employment, working as a stabilizing anchor for the economy. On the edge, the ELR proposes eliminate completely involuntary unemployment. The implementation of the ELR, however, requires the construction of institutions that aim to remake the market economy, as well as deepen and energize politics and democracy, goals that are part of the ED program. Thus, the ED would, in theory, an environment conducive to innovative policies guarantors of training and occupation of the individual, essential for their emancipation institutional environment. In Brazil, which has serious infrastructure problems and qualification of manpower, such a program has enormous potential benefit. However when transposed to the Northeast of Brazil through the Plan for the region based on the principles of the ED and the hypothetical coupling to the ELR could not confirm or reject the hypothesis sub-compatibility of these two theoretical frameworks. The findings point to a partial convergence between these two programs

A escola de aprendizes artífices de natal: república, trabalho e educação (1909 1942)

Crées par leDécret n° 7.566, le 23 septembre 1909, les 19 Escolas de Aprentizes Artífices (Écoles d Aprentis Artisans) stratégiquement situées dans les capitales des états brésiliens, répresentaient l une de plus importantes réalisations pour la formation de main-de-oeuvre qualifiée dans les premières décennies de XXème siècle. Alors, ce travail est constitué par une recherche historique ayant eu pour base les informations apportées par des documents divers (Lois, Décrets, Rapports et Messages Gouvernementales, Livres des Immatriculations) et des nouvelles publiées dans le journal A República, disponibles à l Instituto Histórico e Geográfico do Rio Grande do Norte IHG-RN, à l Arquivo Público do Estado et au Centro Federal de Educação Tecnológica do Rio Grande do Norte (CEFET RN). On montre la configuration que l expérience de l École d Aprentis Artisans a constituée au Rio Grande do Norte à partir de 1909, crée avec le niveau élémentaire jusqu au 1942, quand la Lei Orgânica do Ensino Industrial a changé cet enseignement en le modifiant pour le niveau secondaire. Dans l état du Rio Grande do Norte(RN), ce genre d école a été crée au 3 janvier de 1910. La finalité était la formation des ouvriers et contremaîtres par l enseignement pratique et technique nécessaires aux mineurs qui puissent apprendre un métier. L école du RN a contribuée pour la consolidation du projet politique-idéologique de la construction de la nationalité brésilienne, par des pratiques des contenu patriotique et civique-militaire, en détachant l insertion du scoutisme scolaire comme expression de la militarisation des pratiques éducatives pour le contrôle des corps. Malgré l enseignement professionnel avoir été utilisé pour l imposition des modèles culturelles sous-jacents aux rapports de production capitaliste qui étaient exigés des travailleurs, la Escola de Aprendizes Artífices de Natal a répondue à la demande locale, ce qui renforce l idée que sa création dans ce moment historique a attendu surtout le but politique-idéologique plutôt que celui du développement économique et éducationnel de la population norte-riograndense

Economic analysis of cucumber and lettuce intercropping under greenhouse in the winter-spring

A análise econômica complementa a avaliação da eficiência dos cultivos consorciados, considerando além da produção física das culturas, o preço dos produtos segundo sua classificação qualitativa e época do ano. Avaliou-se economicamente consórcios de alface crespa e pepino, em duas populações de plantas, no inverno-primavera, em casa de vegetação, em Jaboticabal, SP, Brasil. Foram calculados o custo operacional total (COT), a receita bruta (RB) e o lucro operacional (LO) das culturas do pepino e alface em monocultura e em consórcio. A mão-de-obra foi a componente com maior participação no COT das culturas em consórcio e monocultura. Maiores RB e LO foram observadas nos cultivos consorciados estabelecidos com o transplante da alface e do pepino no mesmo dia, independente da densidade populacional. Considerando-se o lucro operacional e o índice de uso eficiente da área, recomenda-se o cultivo consorciado com transplante da alface até 10 dias após o transplante (DAT) do pepino, com duas linhas, e ao 0 DAT do pepino cultivado com uma linha no canteiro

Metodologia de implantação da construção enxuta: estudo de caso em construtora de porte médio

In recent years, the Brazilian construction industry has gone by changes like currency stability, increasing competition, shortage of skilled labor and increasing quality importance required by the customer, who made the sector companies seek solutions through new management practices in order to become more efficient. A alternative to these management practices is known as Lean Construction which is derived from the Toyota System Production. Lean Construction main goals are to reduce parts of activities that do not add value, increase product value by considering customer needs, reduce variability and production cycle time, simplify process by reducing the number of parts or steps, increase the flexibility in the product execution and transparency process, focus the control on overall process, introduce continuous improvement process, maintain a balance between improvements in flows and conversions and seek to learn from practices adopted by competitors. However, the construction industry is characterized by having nomadic activity, which undertakes an unique product with high cost of production and big inertia for behavioral change, making it difficult to implement the philosophy of lean construction in companies. In this sense, the main objective of this study is to develop a methodology for implementation of the principles of Lean Construction. The method of implementing the proposed management system was designed with the aid of 5W2H tool, and the implementation process is divided into three phases. The first one aims to know in a macro way the current operation of construction, identify who is its target audience and what are the products and services offered to the Market. The second phase aims to describe what actions should be taken and which documents are needed to be created or modified; finally, the third step goal consists in how to control and monitor established processes, where through Strategic Planning the company goals would be set along with their respective targets and indicators in order to keep the system working, aiming for continuous improvement with focus on the customer. This methodology was conceived as a case study analyzing a medium size construction with more than 18 years of activity and certified for almost 10 years with ISO9001 and level A in PBQP-H. We also conclude that this implementation process can be used in any developer and / or builder

Inserção do Design em Micro e Pequenas Empresas: o caso de duas indústrias moveleiras no Estado do Rio Grande do Norte /

This work aims to promote design aspects into furniture Small and Medium Enterprises (SME s) at Rio Grande do Norte State. The final outcome will be an increasing on their competitiveness as well as consider design as key strategic aspect for their business. As a consequence, the results are based on two SME companies from the furniture sector located at Natal/RN. The study is based on a literature research followed by a management diagnosis for each company. The diagnosis was base don interviews with the entrepreneurs and their employees as well as meetings, participant observations and document analysis. Based on this analysis, specific aspects were implement in order to boost the production line as well as the product development process (PDP) and the development of a prototype. The results have indicated some limitation of these companies regarding their low technological on their production line, poor management and work skills as well as low perception of design as a competitive tool. Regardless these results, it was observed that design has brought an important contribution for cultural changes within companies as well as for the development of better quality and competitive products

Fatores que afetam a competitividade do queijo artesanal: um estudo exploratório no Seridó/RN

This article presents a study on the research of the factors that affect the competitiveness of cheese produced in a craft in the Seridó of Rio Grande do Norte in the perception of rural producers. His theory is based on factors of competitiveness and definitions of craft production. This research was performed in the important area of production and marketing of cheeses from the state. The methodology used was exploratory research descriptive type survey. The research field of 213 returned questionnaires validated. those interviewed were rural producers of artisanal cheese, with properties distributed in the districts located in the region. The results showed the production of artisanal cheese in Seridó / RN's main points of difficulty to compete: the great marketing in the informality, workforce has low skills and education, has little technical assistance, low acceptance by technological innovations and absence of integration between producers which creates low productivity and qualification of the production chain

Método de avaliação do gerenciamento de resíduos em canteiro de obras da construção civil : proposta baseada em empresas construtoras da cidade de Natal-RN

According to great concern between the developed industrial activities and resultant impacts over the environment, an association of several factors have occurred, procedures to the efficient management of the rotation between economical development and the environment have been improved. A research in field have been realized inside building sites of companies in order to provide knowledge about the implemented and accomplish actions according to the resolution from CONAMA nº307. Trough the interview among the representations of the companies and photographic survey in loco, such as, what makes the companies implement this management, reutilization and recycling, transport and disposition. The present study had as objective: analyze the insertion of the used tools to residuals management, proposing improvements, in a way that it can be easily identified during the procedures execution in the building sites of the building companies of the city of Natal/RN. To reach the goal, in the first place a revision of the pertinent literature was performed; there for, it can be seen the relation between residues management and environment sustainability, once it happens in a continued way it may prevent the waste and reduces the risk that the activities way bring to the employees, community and environment; once found the great difficult faced with regard to labors, material, equipment, project, planning, costumer s interference, furnisher. And still, it could be verified wich materials generate greater indexes of residues in the works and the main occurrences of waste and loss. However a greater transparency is needed coming from the high administration in the commitment with the continued actions, to make it so, there must be a cultural change inside the company. There for there will be a greater productivity and quality of the under taking such as costumer s satisfaction

Desempenho de bovinos de corte mantidos em pastagem de capim-marandu submetidos a diferentes estratégias de suplementação no período das águas e da seca

Este trabalho foi realizado com o objetivo de avaliar o ganho de peso de bovinos mantidos em pastagens de Brachiaria brizantha cv. Marandu submetidos a três estratégias de suplementação no período das águas e da seca de 2003 e águas de 2004. Os tratamentos consistiram da suplementação diária (SD), em dias alternados (DA) e de segunda à sexta-feira (SF). Foram utilizados 24 bovinos mestiços com peso inicial de 230 kg. Os animais foram pesados individualmente sem jejum, em intervalos de 28 dias. O delineamento adotado foi o inteiramente casualizado, com três tratamentos e oito repetições. Não houve diferença no ganho de peso dos animais, sendo obtidos valores médios de 0,76; 0,71 e 0,74 kg/dia no período das águas de 2003, de 0,57; 0,51 e 0,54 kg/dia na seca do mesmo ano e de 0,61; 0,62 e 0,57 kg/dia no período das águas de 2004 nos tratamentos SD, da e SF, respectivamente. A redução na freqüência de suplementação pode representar uma opção para o produtor visando à redução dos custos do fornecimento da alimentação, pois permite maior racionalização da mão-de-obra na propriedade e não afeta o desempenho animal.

Custo de produção do maracujá-amarelo (Passiflora edulis)

Objetivou-se analisar economicamente a cultura do maracujá-amarelo (Passiflora edulis) na região de Marília-SP, safra de 2010/2011. Foram utilizadas estruturas do custo operacional efetivo e custo operacional total referente à fase de implantação e condução da lavoura por unidade de área e cinco indicadores de rentabilidade. Identificou-se um custo total de produção de R$ 37.751,67 por hectare ou R$ 1,89 por quilo da fruta. Os itens do custo operacional efetivo que mais oneraram o sistema de produção corresponderam às operações de máquinas (31,1%) e mão de obra (23,5%). Os indicadores de rentabilidade mostraram-se desfavoráveis para o sistema produtivo analisado, em decorrência, principalmente, do alto preço dos insumos e práticas para controle de doenças. Há necessidade de adequações técnicas relacionadas com o manejo fitossanitário da cultura para a redução do custo total de produção de modo a tornar a atividade rentável.

Viabilidade econômica dos sistemas manual e mecanizado de aplicação de herbicidas em ferrovias

A aplicação mecanizada de herbicidas em ferrovias tem como principal vantagem a grande capacidade operacional, cobrindo trechos extensos em curtos espaços de tempo. Entretanto em função das características dos equipamentos utilizados, quase sempre ocorre grande desperdício de herbicida. A aplicação manual, através de pulverizadores costais, tem como principal vantagem a possibilidade da pulverização dirigida às áreas infestadas, diminuindo a quantidade de herbicida aplicado. Por outro lado, sua reduzida capacidade operacional faz com que a aplicação de longos trechos seja demorada, tornando-a, assim, mais dependente dos problemas climáticos e operacionais da ferrovia. O objetivo do trabalho foi realizar uma análise comparativa das características operacionais e econômicas destes sistemas de aplicação, apontando os fatores mais importantes a serem avaliados para a sua implantação. Para tanto, foram realizadas simulações em computador, baseando-se em diversas equações matemáticas e dados levantados no campo. Os resultados mostraram que a aplicação manual apresentou-se mais econômica apenas para trechos com baixas infestações (até 10%, e média). Na composição de custos, os gastos com herbicidas corresponderam a cerca de 80% do total para a aplicação mecanizada e apenas 8% na manual. Levando-se em conta os fatores operacionais e de mão-de-obra, em apenas um dos trechos avaliados houve vantagem econômica do uso da aplicação manual.

Interferência de plantas daninhas no cultivo da melancia

A cultura da melancia é uma atividade explorada regionalmente, sendo uma das mais importantes fontes de renda familiar de pequenos municípios do médio Paranapanema, onde mudanças significativas no processo produtivo são atualmente constatadas, passando de mão-de-obra intensiva para uso de tecnologias promissoras, como é o caso do manejo de plantas daninhas. Um experimento foi conduzido no município de Oscar Bressani (SP), em área de produção comercial, com objetivo de estudar a interferência de plantas daninhas, no cultivo da melancia, na safra 2002/2003. O delineamento experimental utilizado foi de blocos ao acaso com dez tratamentos e quatro repetições, representadas por parcelas com área útil de 18 m², contendo quatro plantas de melancia e infestação prevalecente das espécies Sidaspp, Brachiaria humidicola, Commelina benghalensise Portulaca oleracea. A infestação das plantas daninhas foi estimada através de amostragens aleatórias das parcelas utilizando-se quadro vazado de ferro com 0,5 m de lado. Os tratamentos constaram de testemunhas capinadas e sem capina e diferentes épocas de controle da infestação, de forma que a cultura foi mantida na presença ou ausência das plantas daninhas até 7; 14; 28; 56 e 63 dias após a sua emergência (DAE). A ocorrência do período inicial de convivência possível maior que o período final estabeleceu o Período Crítico de Prevenção da Interferência do 9º ao 13º dias (PCPI= 9-13 DAE). A redução média da produtividade em função da interferência das plantas daninhas durante todo o ciclo da melancia foi de 41,4%. As características diâmetro e espessura da casca dos frutos também foram influenciadas pela convivência com a infestação durante todo o ciclo com decréscimos, de 7,9% e 23,3%, respectivamente, em média, ao contrário do comprimento e diâmetro de ramas e do ºBrix da polpa dos frutos, onde não foram constatadas diferenças significativas.

Estudo da formulação de massas cerâmicas provenientes da região do Seridó-RN para fabricação de telhas

This work has for objective study compared the characteristics and technological properties of ceramic bodies from the region of Seridó-RN. The region under study has identified 23 cities where they were 80 ceramics industries. To define the universe of search, there was a survey of pottery that are part of APL Seridó next to the IEL. The characteristics and operating conditions of ceramics industries of the region were identified through a socio-economic questionnaire applied locally, which addressed issues such as: profiles of companies, production process etc. The analysis of information collected from 24 companies identified in seven cities shows that the vast majority of industries is small, with family structure, obsolete equipment and labo, little qualified. Most of the pottery works with low technical knowledge, poor control of the production process and product technology. The raw collected were submitted to analysis of X ray diffraction, chemical composition, termical analysis, particle size distribution and plasticity. Then were produced five formulations and made by uniaxial pressure at 25 MPa for firing in temperatures varying from 850 to 1050 °C. The firing technological properties evaluated were: mass loss to fire, lineal shrinkage, apparent density, apparent porosity, water absorption and flexural strength (3 points). The results indicated that the raw materials from the region have significant similarities in the composition chemical and mineralogical. Furthermore, it indicates the possibility of the use of cycles of firing faster and efficient than the current, limited to some clay mass burning of certain conditions

Avaliação do processo industrial da cerâmica vermelha na região do Seridó - RN

Particularly in Braziland in Rio Grande do Norte, companies manufacturing red ceramic, play an important role as agents of development to study the region Seridó- RN, specific place for carrying out the research. It is observed in this region a concentration of red ceramic industries of small size, which, despite its importance in the ceramic, they are unable to enjoy or use the new forms of administrative management and technological advances designed and offered by universities, centers of research and projects of governments, remained almost entirely outside the progress and modernization, technological and administrative. These companies still have outdated technology, and management processes, providing quality problems and standardization of end products. Upon these conditions are the companies going through crisis and struggling to survive alone and without assistance. The region of Seridó-RN, lets make a detailed case study of red ceramic companies in the region proposed from the existing theoretical and actual lifting of the condition of the product manufacturing red ceramic, allowing through this overview of the implementation of collect samples of raw materials, allowing the study of each ceramic industry that contributed to the participation of the research, which was determined parameters such as: analysis of the physical, chemical and technological properties of raw materials, characterization of the processes used, raising the technological resources considering equipment, machinery, supplies, raw materials and facilities available and its organization by type of products from companies involved in this study. The methodology consists of the following steps: collection of raw material, crushing and screening, characterization of raw materials (liquid limit, chemical analysis, mineralogical analysis, differential thermal analysis, sieve analysis), mixing, forming, cutting, drying and burning of ceramic bodies and bodies of evidence. The results showed that it was clay with distinct characteristics with respect to plasticity. With respect to the different compositions of mixtures of ceramic masses, we conclude that the ceramic properties showed a direct proportionality with increasing fraction of the clay not plastic. However, the compositions of the masses studied proved to be the most appropriate for the types of simulated clay for use in ceramics. Adopted in the ceramic processing made it possible to obtain products the resulted in consistent properties, and in some cases even exceeding the requirements of technical studies and standard-Brazilian clays to obtain ceramic products such as tiles, bricks and tiles to floor. Based on the discussions from the results obtained in the various processing steps of this work, one can draw conclusions according to the physico-chemical and mineralogical properties of raw materials, the properties of ceramic products burned and analysis. This work may be used by other researchers, private companies and governmental organizations, undergraduate students and graduate, can develop studies and future research to: develop projects to modify the furnaces; mapping projects develop and rationalize the exploitation of raw materials ;promoting reforestation and forest management; develop reduction projects and recovery of waste; develop training projects in manpower sector, and develop security projects, improving the conditions of work in the area pottery