Rehabilitation of Atrophic Maxilla Using the Combination of Autogenous and Allogeneic Bone Grafts Followed by Protocol-Type Prosthesis

Currently, there are several techniques for the rehabilitation of atrophic maxillary ridges in literature. The grafting procedure using autogenous bone is considered ideal by many researchers, as it shows osteogenic capability and causes no antigenic reaction. However, this type of bone graft has some shortcomings, mainly the restricted availability of donor sites. In recent years, several alternatives have been investigated to supply the disadvantages of autogenous bone grafts. In such studies, allogeneic bone grafts, which are obtained from individuals with different genetic load, but from the same species, have been extensively used. They can be indicated in cases of arthroplasty, surgical knee reconstruction, large bone defects, and in oral and maxillofacial reconstruction. Besides showing great applicability and biocompatibility, this type of bone is available in unlimited quantities. on the other hand, allogeneic bone may have the disadvantage of transmitting infectious diseases. Atrophic maxillae can be treated with bone grafts followed by osseointegrated implants to obtain aesthetic and functional oral rehabilitation. This study aimed to show the viability of allogeneic bone grafting in an atrophic maxilla, followed by oral rehabilitation with dental implant and protocol-type prosthesis within a 3-year follow-up period by means of a clinical case report.

Controle do crescimento vegetativo e floração de mangueiras cv. Kent com reguladores de crescimento vegetal

Paclobutrazol applied to the soil is used for the production management of mangoes in most of the orchards, but it presents as disadvantage the greater persistence in plant and soil. Three growth regulators (prohexadione-Ca, trinexapac-ethyl and chlormequat chloride) were foliar applied, at two dosages and compared to paclobutrazol applied as soil-drench. The experiment was conducted in the region of the Sao Francisco Valley, Petrolina, PE, from December 2007 to July 2008, in a mango orchard that has a spacing of 8 m between lines and 5 m between plants. In order to compare the effects of the treatment, data were evaluated regarding to vegetative growth (number, length and leaf number of vegetative branches) and flowering (percentage and panicles length). The combination of PBZ, soil applied with ProCa, foliar applied was the most efficient in controlling vegetative growth of branches of the mango 'Kent', but not regarding to flowering, where there were no differences between treatments.

Aggressiveness Overcomes Body-Size Effects in Fights Staged between Invasive and Native Fish Species with Overlapping Niches

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Integração de critérios técnicos, ambientais e sociais em estudos de alternativas locacionais para implantação de aterro sanitário

A Política Nacional do Meio Ambiente tem como objetivo a conciliação do desenvolvimento econômico e social com a qualidade ambiental, e dispõe de vários instrumentos que procuram contemplara capacidade de suporte do meio. Assim, a discussão sobre a localização das atividades é uma etapa importante para a avaliação da viabilidade ambiental de um determinado empreendimento, notadamente em processos de licenciamento ambiental. O trabalho apresenta uma abordagem metodológica para integração de critérios técnicos, ambientais e sociais em estudos de alternativas de localização de aterros sanitários, com especial atenção à interação entre os aspectos ambientais e os elementos fundamentais de um projeto (a saber, requisitos locacionais e concepção tecnológica), aplicado em um estudo de caso em São Carlos (SP). Como resultados principais, destacam-se o maior foco nos impactos significativos e a possibilidade de envolvimento de segmentos importantes da sociedade previamente à elaboração dos estudos ambientais.

Validation of a mutant of the pore-forming toxin sticholysin-I for the construction of proteinase-activated immunotoxins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação de revestimento comestível em abacaxis processados por métodos combinados: isoterma de sorção e cinética de desidratação osmótica

A desidratação osmótica é uma etapa essencial na elaboração de produtos de fruta através da Tecnologia dos Métodos Combinados ou de Obstáculos (Hurdle Technology), pois reduz a atividade de água para níveis que, combinando um ou mais obstáculos, aumentam a estabilidade do produto. Neste processo há uma perda de água da fruta para a solução e incorporação de sólidos solúveis pelo produto. Este último fluxo é considerado uma desvantagem do processo pois pode alterar o sabor do produto. Neste trabalho estudou-se a ação de revestimentos comestíveis a base de alginato e gelatina aplicados em abacaxis, previamente à desidratação osmótica, como barreira à incorporação de sólidos solúveis. Os abacaxis com e sem revestimento (controle) foram desidratados em solução de sacarose sob condições isotérmicas. Foram determinadas as isotermas de dessorção de abacaxis revestidos com gelatina, alginato e sem revestimento e os parâmetros cinéticos do processo de desidratação osmótica. Abacaxis revestidos com alginato apresentaram menor velocidade de ganho de sólidos, sem alterar a velocidade de perda de água, quando comparado ao controle.

Avaliação da qualidade de vida de mulheres com HIV/AIDS através do HAT-QoL

Com objetivo de avaliar qualidade de vida entre mulheres portadoras de HIV/AIDS, aplicou-se o HIV/AIDS ­ Quality of Life test (HAT-QoL), instrumento específico para indivíduos infectados pelo HIV. Compõe-se de 42 questões e divide-se em nove domínios com questões sobre diversos aspectos de vida dos portadores. A escala foi submetida à tradução reversa e pré-teste. Sua forma definitiva foi aplicada entre 73 mulheres com HIV/AIDS. Os resultados, após análise estatística, indicaram que os domínios mais comprometidos foram: Preocupações financeiras, Preocupação com sigilo sobre a infecção, Atividades sexuais e Preocupações com a saúde. Esses resultados foram atribuídos ao fato das mulheres apresentarem, além da infecção, uma situação sócio-econômica precária que, provavelmente, também interferiu negativamente em sua qualidade de vida. Concluímos que a escala HAT-QoL foi adequada para a população de mulheres portadoras de HIV deste estudo, apesar de ser originária de uma cultura diferente da brasileira, já que sua aplicação produziu resultados semelhantes aos da literatura internacional.

Characterization of the porosity developed in a new titania-alumina catalyst support prepared by the sol gel route

Titanium oxide (TiO2) is a good candidate for support of hydrotreating catalysts but has the disadvantage of presenting a low surface area and a poor thermal stability when compared with Al2O3. A mixed TiO2-Al2O3 support was proposed as an alternative that is expected to be free from these drawbacks. The variation during firing of the nanoporous texture of supports composed of TiO2-Al2O3, TiO2 and Al2O3 was studied by small angle X-ray scattering (SAXS). The supports were prepared by the sol-gel route using Ti and Al isopropoxides. We have particularly analyzed the effects of acid and basic hydrolysis on the nanostructural features of catalyst supports fired at different temperatures. The nanopore radius distribution functions were determined from SAXS results assuming a simple model of spherical nanopores embedded in a homogeneous solid matrix. The modal pore radius in both pure TiO2 and pure Al2O3 supports grows from 1.3 to 2.2 nm as the firing temperature increases from 673 to 973 K. on the other hand, the modal pore radius in the mixed TiO2-Al2O3 support remains below 1.2 nm over the same range of firing temperatures. These results demonstrate the good thermal stability of the nanoporous texture of mixed TiO2-Al2O3 supports.

Synthesis Pengo System plates for the treatment of long-bone diaphyseal fractures in dogs

A Brazilian orthopaedic company designed a stainless steel plate called Synthesis Pengo System (S.P.S.), which has one fixed and one changeable extremity. According to the assembly of the changeable extremity, it is possible to obtain dynamization or neutralization of the fracture site. Since the S.P.S. plate was developed for use in human patients, the aim of this study was to evaluate this system in long-bone diaphyseal fractures in dogs. Eight dogs with closed diaphyseal fractures of the femur (n = 1), radius and ulna (n = 5), and tibia (n = 2) were used. Patients were aged seven months to three years and weighed 18 to 31.2 kg. The S.P.S. plate was assembled with one fixed extremity and one changeable extremity in dynamization mode. The trail bar was positioned for synthesis modules with holes for cortical screws. The modules were positioned close to one another in two fractures and for away from the fracture site in the others. The bone healing occurred by external callus. Since motion at the fracture site determines the amount of callus required, the secondary bone healing that was observed in all of the cases indicated less rigid fixation of this system. A potential benefit of this system was a lesser interface contact with the bone since it was only done by trail bar. The major disadvantage was the prominence of the implant. It was possible to conclude that the S.P.S. plate appears to be a suitable method for the treatment of diaphyseal fractures in dogs.

Ceramic Crucible Corrosion by Heavy Metal Oxide Glasses, Part II: Diffusion Study

Due to their low cost and high resistance to corrosion, ceramic crucibles can be used for the melting of PBG glasses (PbO-BiO 1.5GaO 1.5). These glasses present good window transmission from ultra-violet to infrared, making their use as optical fibres promising. However, their disadvantage is the high reactivity, leading to the corrosion of different crucibles, including gold and platinum ones. In this work, the corrosion of Al 2O 3, SnO 2 and ZrO 2 crucibles after melting at temperatures varying from 850 to 1000°C, was evaluated by Scanning Electronic Microscopy (SEM) in conjunction with microanalysis by EDS. The lead diffusion profile in the crucible material was obtained. Diffusion coefficients were calculated according to the Fick and Fisher theories. Results indicated that the different crucibles presented similar behaviour: in the region near the interface, diffusion occurs in the volumetric way and in regions away from the interface, diffusion occurs through grain boundary.

Care arrangements for people with dementia in developing countries

Background: Rapid demographic ageing will soon lead to large increases in the numbers of persons with dementia in developing countries. This study is the first comprehensive assessment of care arrangements for people with dementia in those regions. Methods: A descriptive and comparative study of dementia care; caregiver characteristics, the nature of care provided, and the practical, psychological (Zarit Burden Interview, General Health Questionnaire) and economic impact upon the caregiver in 24 centres in India, China and South East Asia, Latin America and the Caribbean and Africa. Results: We interviewed 706 persons with dementia, and their caregivers. Most caregivers were women, living with the person with dementia in extended family households. One-quarter to one-half of households included a child. Larger households were associated with lower caregiver strain, where the caregiver was co-resident. However, despite the traditional apparatus of family care, levels of caregiver strain were at least as high as in the developed world. Many had cutback on work to care and faced the additional expense of paid carers and health services. Families from the poorest countries were particularly likely to have used expensive private medical services, and to be spending more than 10% of the per capita GNP on health care. Conclusions: Older people in developing countries are indivisible from their younger family members. The high levels of family strain identified in this study feed into the cycle of disadvantage and should thus be a concern for policymakers in the developing world. Copyright © 2004 John Wiley & Sons, Ltd.

Placement and sizing evaluation of distributed generation in electric power systems

This paper presents a methodology for the placement and sizing evaluation of distributed generation (DG) in electric power systems. The candidate locations for DG placement are identified on the bases of Locational Marginal Prices (LMP's) obtained from an optimal power flow solution. The problem is formulated for two different objectives: social welfare maximization and profit maximization. For each DG unit an optimal placement is identified for each of the objectives.

Women's contribution to equality in Latin America and the Caribbean

Includes bibliography

Millennium development goals: progress towards the right to health in Latin america and the Caribbean

Includes bibliography

Recent trade performance of Caribbean countries

Includes bibliography