Fabrication of carbon nanotube lateral field emitters

We report on the fabrication and field emission of carbon nanotube lateral field emitters. Due to its high aspect ratio and mechanical strength, we use vertically aligned multi-wall carbon nanotubes prepared by plasma-enhanced chemical vapour deposition as cathodes, which makes the fabrication of cantilever type lateral field emitters possible. The emission characteristics show that the field emission initiates at 11-17 V. The device has high geometrical enhancement factors (9.3 × 106 cm-1) compared to standard Spindt tips, which may be due to increased field concentration at the nanotube tip and the close proximity of the anode (<1 μm). The relative ease of fabrication compared to vertical field emitters and enhanced field emission characteristics observed makes the carbon nanotube lateral field emitter a good candidate for future integrated nano-electronic devices.

Carbon nanotube Schottky diode and directionally dependent field-effect transistor using asymmetrical contacts

We demonstrate the fabrication and operation of a carbon nanotube (CNT) based Schottky diode by using a Pd contact (high-work-function metal) and an Al contact (low-work-function metal) at the two ends of a single-wall CNT. We show that it is possible to tune the rectification current-voltage (I-V) characteristics of the CNT through the use of a back gate. In contrast to standard back gate field-effect transistors (FET) using same-metal source drain contacts, the asymmetrically contacted CNT operates as a directionally dependent CNT FET when gated. While measuring at source-drain reverse bias, the device displays semiconducting characteristics whereas at forward bias, the device is nonsemiconducting. © 2005 American Institute of Physics.

Study of lateral mode SOI-MEMS resonators for reduced anchor loss

MEMS resonators fabricated in silicon-on-insulator (SOI) technology must be clamped to the substrate via anchoring stems connected either from within the resonator or through the sides, with the side-clamped solution often employed due to manufacturing constraints. This paper examines the effect of two types of commonly used side-clamped, anchoring-stem geometries on the quality factor of three different laterally-driven resonator topologies. This study employs an analytical framework which considers the relative distribution of strain energies between the resonating body and clamping stems. The ratios of the strain energies are computed using ANSYS FEA and used to provide an indicator of the expected anchor-limited quality factors. Three MEMS resonator topologies have been fabricated and characterized in moderate vacuum. The associated measured quality factors are compared against the computed strain energy ratios, and the trends are shown to agree well with the experimental data. © 2011 IOP Publishing Ltd.

Comportamiento mecánico y eléctrico de un gel de silicona empleado en el encapsulamiento de transistores de potencia tipo IGBT

Resumen: Los materiales dieléctricos son ampliamente utilizados en el sector energético, estando a veces sometidos a condiciones de alto estrés eléctrico, mecánico y ambiental en general, que los ponen al borde de procesos y mecanismos de degradación que conllevan a una probable falla futura. Los geles dieléctricos han comenzado a ser ampliamente utilizados en aplicaciones de encapsulamiento de transistores de alta potencia tipo IGBTs (del inglés Insulated Gate Bipolar Transistor), donde se manejan tensiones y corrientes considerables. En la mayoría de los casos, se necesita una protección para evitar descargas en fase gaseosa, ingreso de humedad al circuito y amortiguamiento mecánico para vibraciones. En el presente trabajo caracterizamos con diferentes técnicas aspectos destacables de este tipo de encapsulantes a base de un gel bifásico de silicona. Para observar el proceso de curado se empleó la técnica de espectroscopía de absorción infrarroja (FTIR), junto con la reología oscilatoria desde las propiedades mecánicas. A su vez, esta última, sirvió para comparar información provista por un novedoso concepto que implica observar a estas últimas desde el interior, a partir de la evolución de cavidades gaseosas generadas eléctricamente. Se comprobó que el comportamiento de estas cavidades es sensible a la historia previa del material, es decir, mecanismos de curado y envejecimiento previo.

Oil-Water Two-Phase Flow Inside T-Junction

The oil/water two-phase flow inside T-junctions was numerically simulated with a 3-D two-fluid model, and the turbulence was described using the mixture k - epsilon model. Some experiments of oil/water flow inside a single T-junction were conducted in the laboratory. The results show that the separating performance of T-junction largely depends oil the inlet volumetric fraction and flow patterns. A reasonable agreement is reached between the numerical simulation and the experiments for both the oil fraction distribution and the separation efficiency.

Stability Of Adhesion Clusters And Cell Reorientation Under Lateral Cyclic Tension

This work is motivated by experimental observations that cells on stretched substrate exhibit different responses to static and dynamic loads. A model of focal adhesion that can consider the mechanics of stress fiber, adhesion bonds, and substrate was developed at the molecular level by treating the focal adhesion as an adhesion cluster. The stability of the cluster under dynamic load was studied by applying cyclic external strain on the substrate. We show that a threshold value of external strain amplitude exists beyond which the adhesion cluster disrupts quickly. In addition, our results show that the adhesion cluster is prone to losing stability under high-frequency loading, because the receptors and ligands cannot get enough contact time to form bonds due to the high-speed deformation of the substrate. At the same time, the viscoelastic stress fiber becomes rigid at high frequency, which leads to significant deformation of the bonds. Furthermore, we find that the stiffness and relaxation time of stress fibers play important roles in the stability of the adhesion cluster. The essence of this work is to connect the dynamics of the adhesion bonds (molecular level) with the cell's behavior during reorientation (cell level) through the mechanics of stress fiber. The predictions of the cluster model are consistent with experimental observations.

Ocean currents-induced pipeline lateral stability on sandy seabed

Unlike previous mechanical actuator loading methods, in this study, a hydrodynamic loading method was employed in a flow flume for simulating ocean currents induced submarine pipeline stability on a sandy seabed. It has been observed that, in the process of pipeline losing lateral stability in currents, there usually exist three characteristic times: (1) onset of sand scour; (2) slight lateral displacement of pipeline; and (3) breakout of pipeline. An empirical linear relationship is established between the dimensionless submerged weight of pipeline and Froude number for describing pipeline lateral stability in currents, in which the current-pipe-soil coupling effects are reflected. Scale effects are examined with the method of "modeling of models," and the sand particle size effects on pipeline stability are also discussed. Moreover, the pipeline stability in currents is compared with that in waves, which indicates that the pipeline laid directly upon the sandy seabed is more laterally stable in currents than in waves.

Centrifuge modeling of suction bucket foundations for platforms under ice-sheet-induced cyclic lateral loadings

This paper presents the results of a series of centrifuge model tests performed to study the behavior of suction bucket foundations for a tension leg platform in the Bohai Bay, China. The target lateral loadings were from ice-sheet-induced structural vibrations at a frequency of 0.8-1.0 Hz. The results indicate that excess pore water pressures reach the highest values within a depth of 1.0-1.5 in below the mud line. The pore pressures and the induced settlement and lateral displacement increase with the amplitude of the cyclic loading. Two failure modes were observed: liquefaction in early excitations and settlement-induced problems after long-term excitations. (c) 2006 Elsevier Ltd. All rights reserved.

Evaluación de las técnicas quirúrgicas medial VS la técnica lateral en ovariohisterectomía en la especie canina en el municipio de Camoapa, 2014.

El presente trabajo de investigación fue realizado en la ciudad de Camoapa, municipio del Departamento de Boaco, Republica de Nicaragua; el mismo que tuvo como objetivo determinar la técnica quirúrgica de esterilización más adecuada para una pronta recuperación del paciente, tomándose como muestra a 12 hembras canina, cuyas edades fueron comprendidas desde los 6 meses hasta los 24 meses de edad de toda raza. Las técnicas empleadas fueron la técnica medial y la técnica lateral, el tamaño requerido de la población para este trabajo fue de 12 hembras caninas las cuales se dividieron en cuatro grupos de 3 animales para cada grupo, generando 7 observaciones para cada grupo. Dichas intervenciones siguieron un protocolo de asepsia, anestesia y quirúrgico. De esta manera de acuerdo, a los procedimientos estadísticos se desprendieron las siguientes conclusiones: no existe una interacción entre la edad, las técnicas y el tiempo de recuperación del paciente post–quirurgico. Por otra parte, al evaluar la variable de cicatrización, se demostró que los caninos de menor edad tienen una mejor respuesta a la intervención quirúrgica. Y en conclusión para tener una cicatrización en menor tiempo, se recomienda aplicar una laparotomía lateral, en perras de cualquier edad, por cuanto la técnica utilizada y el tiempo de cicatrización se comportan de manera independiente en relación a la edad del animal.