983 resultados para items
Resumo:
OBJETIVO: Verificar a validade do Questionário de Freqüência Alimentar para Adolescentes para avaliar o consumo de grupos de alimentos entre escolares de Piracicaba, São Paulo. MÉTODOS: Participaram do estudo 94 adolescentes, com idade entre 11 e 15 anos, matriculados em uma escola da rede pública. O consumo alimentar foi avaliado pelo Questionário de Freqüência Alimentar para Adolescentes (QFAA) e a média de dois Recordatórios de 24 horas (R24h) foi utilizada como método de referência. Os itens alimentares foram classificados em 18 grupos. Foram realizadas análises descritivas, teste t-Student pareado e de Wilcoxon, coeficientes de correlação de Pearson e de Spearman. Foram também utilizadas análise de quartis e estatística Kappa ponderado. Os coeficientes de correlação foram corrigidos pela variância intrapessoal dos R24h, estimada a partir de ANOVA com um fator de classificação. RESULTADOS: Não foram verificadas diferenças significativas entre os instrumentos para o arroz, massas, carnes, refrigerantes e sucos artificiais. Os coeficientes de correlação corrigidos pela variabilidade intrapessoal variaram de -0,26 a 0,78. A concordância de classificação dos indivíduos no mesmo quartil de consumo para ambos os métodos variou de 22% (massas) a 50% (feijão). Para quartis opostos, os grupos que tiveram mais de 10% dos indivíduos classificados incorretamente foram massas (19%), carnes (13%) e gorduras (11%). Os valores de Kappa ponderado variaram de - 0,15 (massas) a 0,56 (feijão). O QFAA superestimou o consumo de quase a totalidade dos grupos alimentares e subestimou os grupos dos óleos, feijão, carnes e refrigerantes. CONCLUSÃO: O instrumento apresentou boa validade para feijão, verduras e legumes, leite e derivados, biscoitos recheados e para o arroz.
Resumo:
OBJETIVO: Investigar os níveis séricos e a prevalência de inadequação da ingestão dietética de folato e das vitaminas B6 e B12, identificando os alimentos contribuintes para a ingestão desses nutrientes. MÉTODOS: Estudo observacional, transversal, em adolescentes de 16 a 19 anos, de ambos os sexos, conduzido em Indaiatuba (SP). Coletou-se o registro alimentar de 3 dias não consecutivos. A dieta habitual foi estimada pela remoção da variabilidade intrapessoal, e a prevalência de inadequação da ingestão, pelo método da estimated average requirement como ponto de corte. As análises bioquímicas de folato, B6 e B12 foram conduzidas de acordo com os métodos aceitos na literatura. RESULTADOS: O estudo foi conduzido com 99 adolescentes, a maioria do sexo feminino (58,6%), com média de idade de 17,6 (desvio padrão, DP 0,9) anos. As médias da concentração sérica de folato, B6 e B12 foram de 9,2 (DP 3,4) ng/mL, 18,7 (DP 5,1) nmol/L e 397,5 (DP 188,4) pg/mL, respectivamente; e a prevalência de inadequação da ingestão das vitaminas foi de 15,2, 10,2 e < 1%, respectivamente. Os alimentos que mais contribuíram para a ingestão dos nutrientes foram, para folato: pão francês, macarrão e feijões; para B6: arroz branco, carne de frango e carne bovina; e para B12: carne bovina magra, leite integral e carne bovina gorda. CONCLUSÕES: As prevalências de inadequação de folato, B6 e B12 mostraram-se baixas, possivelmente em decorrência da melhoria do acesso e da disponibilidade de alimentos, fontes dietéticas das vitaminas. Os feijões, presentes na dieta tradicional brasileira, ainda estão entre os principais alimentos que contribuíram para a ingestão de folato, mesmo após a fortificação mandatória com ácido fólico no Brasil.
Resumo:
O objetivo deste estudo foi analisar as competências que, desde a aprovação da lei n.º 11.889/08, incumbem ao técnico em saúde bucal (TSB) no Brasil, incluindo os termos definidos para sua supervisão. Foi realizada análise documental, comparando-se as competências definidas no referido instrumento legal com as previstas no parecer n.º 460/75 do Conselho Federal de Educação e na resolução n.º 63/2005 do Conselho Federal de Odontologia. Foram empregadas técnicas de análise temática considerando-se as habilidades em termos de ações diretas e indiretas distribuídas em quatro áreas de competência: planejamento e administração em saúde, promoção da saúde, prevenção de doenças e de assistência individual. Embora as competências aprovadas na lei tenham sido distribuídas em um número menor de itens, comparado aos dois outros documentos, do ponto de vista qualitativo, os resultados da análise permitiram concluir que vários avanços foram obtidos com a regulamentação da profissão, nos termos aprovados, em todas as áreas de competência. Houve impacto positivo para o processo de trabalho em saúde, tanto com relação à cooperação interprofissional quanto à supervisão técnica das atividades, representando uma conquista relevante dos trabalhadores da área e também uma contribuição significativa para avançar na ampliação do acesso aos serviços odontológicos
Resumo:
O objetivo foi avaliar o desenvolvimento neuropsicomotor de pré-escolares na educação infantil. Estudo de corte transversal, utilizando 38 itens do teste de Denver II. Foram avaliados todos os pré-escolares com idade entre quatro e seis anos incompletos matriculados na Rede Pública Municipal de Ensino de Cuiabá, Mato Grosso, Brasil, no período de agosto 2002 a novembro 2003. Nesse período havia 960 pré-escolares matriculados em 27 creches e duas escolas públicas. Para a análise estatística foi aplicado o teste Ç2 com intervalo de 95% de confiança e ± = 5%. Para calcular os percentis da idade em que os pré-escolares passaram em cada prova foi realizada uma regressão logística. Dos 960 pré-escolares avaliados, 67% apresentaram desempenho normal, 30,2% questionável e 2,8% anormal. Em 27/38 itens avaliados, o percentual de acertos ultrapassou 90%. O desempenho alterado predominou no sexo masculino, no grupo de cinco a seis anos. O desempenho dessa população foi muito semelhante ao dos pré-escolares norte-americanos de Denver, Colorado. O melhor resultado segundo o gênero ocorreu no sexo feminino e segundo a idade no grupo de quatro anos.
Resumo:
PURPOSE most people with mental disorders receive treatment in primary care. The charts developed by the Dartmouth Primary Care Cooperative Research Network (COOP) and the World Organization of National Colleges, Academies, and Academic Associations of General Practitioners/Family Physicians (WONCA) have not yet been evaluated as a screen for these disorders, using a structured psychiatric interview by an expert or considering diagnoses other than depression. We evaluated the validity and feasibility of the COOP/WONCA Charts as a mental disorders screen by comparing them both with other questionnaires previously validated and with the assessment of a mental health specialist using a structured diagnostic interview. METHODS We trained community health workers and nurse assistants working in a collaborative mental health care model to administer the COOP/WONCA Charts, the 20-item Self-Reporting Questionnaire (SRQ-20), and the World Health Organization Five Well-Being Index (WHO-5) to 120 primary care patients. A psychiatrist blinded to the patients' results on these questionnaires administered the SCID, or Structured Clinical Interview for the DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition). RESULTS The area under the receiver operating characteristic curve was at least 0.80 for single items, a 3-item combination, and the total score of the COOP/WONCA Charts, as well as for the SRQ-20 and the WHO-5, for screening both for all mental disorders and for depressive disorders. The accuracy, sensitivity, specificity, and positive and negative predictive values of these measures ranged between 0.77 and 0.92. Community health workers and nurse assistants rated the understandability, ease of use, and clinical relevance of all 3 questionnaires as satisfactory. CONCLUSIONS One-time assessment of patients with the COOP/WONCA Charts is a valid and feasible option for screening for mental disorders by primary care teams.
Resumo:
In 2003-2004, several food items were purchased from large commercial outlets in Coimbra, Portugal. Such items included meats (chicken, pork, beef), eggs, rice, beans and vegetables (tomato, carrot, potato, cabbage, broccoli, lettuce). Elemental analysis was carried out through INAA at the Technological and Nuclear Institute (ITN, Portugal), the Nuclear Energy Centre for Agriculture (CENA, Brazil), and the Nuclear Engineering Teaching Lab of the University of Texas at Austin (NETL, USA). At the latter two, INAA was also associated to Compton suppression. It can be concluded that by applying Compton suppression (1) the detection limits for arsenic, copper and potassium improved; (2) the counting-statistics error for molybdenum diminished; and (3) the long-lived zinc had its 1115-keV photopeak better defined. In general, the improvement sought by introducing Compton suppression in foodstuff analysis was not significant. Lettuce, cabbage and chicken (liver, stomach, heart) are the richest diets in terms of human nutrients.
Resumo:
Objectives: Amazonian populations are experiencing dietary changes characteristic of the nutrition transition. However, the degree of change appears to vary between urban and rural settings. To investigate this process, we determined carbon and nitrogen stable isotope ratios in fingernails and dietary intake of Amazonian populations living along a rural to urban continuum along the Solimoes River in Brazil. Methods: Carbon and nitrogen stable isotope ratios were analyzed from the fingernails of 431 volunteer subjects living in different settings ranging from rural villages, small towns to urban centers along the Solimoes River. Data from 200 dietary intake surveys were also collected using food frequency questionnaires and 24-h recall interviews in an effort to determine qualitative aspects of diet composition. Results: Fingernail delta(13)C values (mean standard deviation) were -23.2 +/- 1.3, 20.2 +/- 1.5, and 17.4 +/- 1.3 parts per thousand and delta(15)N values were 11.8 +/- 0.6, 10.4 +/- 0.8, and 10.8 +/- 0.7 parts per thousand for those living in rural villages, small towns, and major cities, respectively. We found a gradual increase in the number of food items derived from C(4) plant types (meat and sugar) and the replacement of food items derived from C(3) plant types (fish and manioc flour) with increasing size of urban centers. Conclusion: Increasing urbanization in the Brazilian Amazon is associated with a significant change in food habits with processed and industrialized products playing an increasingly important role in the diet and contributing to the nutrition transition in the region. Am. J. Hum. Biol. 23:642-650, 2011. (C) 2011 Wiley-Liss, Inc.
Resumo:
Background: Depression is a common contributor to suffering and disability in people with chronic pain. However, the assessment of depression in this population has been hampered by the presence of a number of somatic symptoms that are shared between chronic pain, treatment side-effects and traditional concepts of depression. As a result, the use of depression measures that do not contain somatic items has been encouraged. Objective: This study examined the psychometric properties of the Depression sub-scale of the Depression Anxiety and Stress Scales (DASS) in a Brazilian chronic pain patient population. Method: Data on a number of measures were collected from 348 participants attending pain facilities. Results: Principal components and exploratory factor analyses indicated the presence of only one factor. Item analyses indicated adequate item-scale correlations. The Cronbach alpha was .96, which suggests an excellent internal consistency. Conclusion: The DASS-Depression scale has adequate psychometric properties and its further use with Brazilian chronic pain populations can now be supported. (c) 2008 Elsevier Inc. All rights reserved.
Resumo:
The objective of this study was to validate the Piper Fatigue Scale-Revised (PFS-R) for use in Brazilian culture. Translation of the PFS-R into Portuguese and validity and reliability tests were performed. Convenience samples in Brazil we as follows: 584 cancer patients (mean age 57 +/- 13 years; 51.3% female); 184 caregivers (mean age 50 +/- 12.7 years; 65.8% female); and 189 undergraduate nursing students (mean age 21.6 +/- 2.8 years; 96.2% female); Instruments used were as follows: Brazilian PFS, Beck Depression Inventory (BDI), and Karnofsky Performance Scale (KPS). The 22 items of the Brazilian PFS loaded well (factor loading > 0.35) on three dimensions identified by factor analysis (behavioral, affective, and sensorial-psychological). These dimensions explained 65% of the variance. Internal consistency reliability was very good (Cronbach`s alpha ranged from 0.841 to 0.943 for the total scale and its dimensions). Cancer patients and their caregivers completed the Brazilian PFS twice for test-retest reliability and results showed good stability (Pearson`s r a parts per thousand yenaEuro parts per thousand 0,60, p < 0,001). Correlations among the Brazilian PFS and other scales were significant, in hypothesized directions, and mostly moderate contributing to divergent (Brazilian PFS x KPS) and convergent validity (Brazilian PFS x BDI). Mild, moderate, and severe fatigue in patients were reported by 73 (12.5%), 167 (28.6%), and 83 (14.2%), respectively. Surprisingly, students had the highest mean total fatigue scores; no significant differences were observed between patients and caregivers showing poor discriminant validity. While the Brazilian PFS is a reliable and valid instrument to measure fatigue in Brazilian cancer patients, further work is needed to evaluate the discriminant validity of the scale in Brazil.
Resumo:
Aims. The aims of this study were to assess the internal reliability (internal consistency), construct validity, sensitivity and ceiling and floor effects of the Brazilian-Portuguese version of the Impact of Event Scale (IES). Design. Methodological research design. Method. The Brazilian-Portuguese version of the IES was applied to a group of 91 burned patients at three times: the first week after the burn injury (time one), between the fourth and the sixth months (time two) and between the ninth and the 12th months (time three). The internal consistency, construct validity (convergent and dimensionality), sensitivity and ceiling and floor effects were tested. Results. Cronbach`s alpha coefficients showed high internal consistency for the total scale (0 center dot 87) and for the domains intrusive thoughts (0 center dot 87) and avoidance responses (0 center dot 76). During the hospitalisation (time one), the scale showed low and positive correlations with pain measures immediately before (r = 0 center dot 22; p < 0 center dot 05) and immediately after baths and dressings (r = 0 center dot 21; p < 0 center dot 05). After the discharge, we found strong and negative correlations with self-esteem (r = -0 center dot 52; p < 0 center dot 01), strong and positive with depression (r = 0 center dot 63; p < 0 center dot 01) and low and negative with the Bodily pain (r = -0 center dot 24; p < 0 center dot 05), Social functioning (r = -0 center dot 34; p < 0 center dot 01) and Mental health (r = -0 center dot 27; p < 0 center dot 05) domains of the SF-36 at time two. Regarding the sensitivity, no statistically significant differences were observed between mean scale scores according to burned body surface (p = 0 center dot 21). The floor effect was observed in most of the IES items. Conclusion. The adapted version of the scale showed to be reliable and valid to assess postburn reactions on the impact of the event in the group of patients under analysis. Relevance to clinical practice. The Impact of Event Scale can be used in research and clinical practice to assess nursing interventions aimed at decreasing stress during rehabilitation.
Resumo:
The aim of this article is to present the main contributions of human resource management to develop sustainable organizations. The relationship between human resources and organizational sustainability, which is based on economical, social and environmental performance, involves some important aspects concerning management such as innovation, cultural diversity and the environment. The integration of items from the triple bottom line approach leads to developing a model based on a strategic and central posture of human resource management. Based on this model, propositions and recommendations for future research on this theme are presented.
Resumo:
Since the 1990s several large companies have been publishing nonfinancial performance reports. Focusing initially on the physical environment, these reports evolved to consider social relations, as well as data on the firm`s economic performance. A few mining companies pioneered this trend, and in the last years some of them incorporated the three dimensions of sustainable development, publishing so-called sustainability reports. This article reviews 31 reports published between 2001 and 2006 by four major mining companies. A set of 62 assessment items organized in six categories (namely context and commitment, management, environmental, social and economic performance, and accessibility and assurance) were selected to guide the review. The items were derived from international literature and recommended best practices, including the Global Reporting Initiative G3 framework. A content analysis was performed using the report as a sampling unit, and using phrases, graphics, or tables containing certain information as data collection units. A basic rating scale (0 or 1) was used for noting the presence or absence of information and a final percentage score was obtained for each report. Results show that there is a clear evolution in report`s comprehensiveness and depth. Categories ""accessibility and assurance"" and ""economic performance"" featured the lowest scores and do not present a clear evolution trend in the period, whereas categories ""context and commitment"" and ""social performance"" presented the best results and regular improvement; the category ""environmental performance,"" despite it not reaching the biggest scores, also featured constant evolution. Description of data measurement techniques, besides more comprehensive third-party verification are the items most in need of improvement.
Resumo:
This work deals with the problem of minimizing the waste of space that occurs on a rotational placement of a set of irregular bi-dimensional items inside a bi-dimensional container. This problem is approached with a heuristic based on Simulated Annealing (SA) with adaptive neighborhood. The objective function is evaluated in a constructive approach, where the items are placed sequentially. The placement is governed by three different types of parameters: sequence of placement, the rotation angle and the translation. The rotation applied and the translation of the polygon are cyclic continuous parameters, and the sequence of placement defines a combinatorial problem. This way, it is necessary to control cyclic continuous and discrete parameters. The approaches described in the literature deal with only type of parameter (sequence of placement or translation). In the proposed SA algorithm, the sensibility of each continuous parameter is evaluated at each iteration increasing the number of accepted solutions. The sensibility of each parameter is associated to its probability distribution in the definition of the next candidate.
Diagnostic errors and repetitive sequential classifications in on-line process control by attributes
Resumo:
The procedure of on-line process control by attributes, known as Taguchi`s on-line process control, consists of inspecting the mth item (a single item) at every m produced items and deciding, at each inspection, whether the fraction of conforming items was reduced or not. If the inspected item is nonconforming, the production is stopped for adjustment. As the inspection system can be subject to diagnosis errors, one develops a probabilistic model that classifies repeatedly the examined item until a conforming or b non-conforming classification is observed. The first event that occurs (a conforming classifications or b non-conforming classifications) determines the final classification of the examined item. Proprieties of an ergodic Markov chain were used to get the expression of average cost of the system of control, which can be optimized by three parameters: the sampling interval of the inspections (m); the number of repeated conforming classifications (a); and the number of repeated non-conforming classifications (b). The optimum design is compared with two alternative approaches: the first one consists of a simple preventive policy. The production system is adjusted at every n produced items (no inspection is performed). The second classifies the examined item repeatedly r (fixed) times and considers it conforming if most classification results are conforming. Results indicate that the current proposal performs better than the procedure that fixes the number of repeated classifications and classifies the examined item as conforming if most classifications were conforming. On the other hand, the preventive policy can be averagely the most economical alternative rather than those ones that require inspection depending on the degree of errors and costs. A numerical example illustrates the proposed procedure. (C) 2009 Elsevier B. V. All rights reserved.
Resumo:
The procedure for online process control by attributes consists of inspecting a single item at every m produced items. It is decided on the basis of the inspection result whether the process is in-control (the conforming fraction is stable) or out-of-control (the conforming fraction is decreased, for example). Most articles about online process control have cited the stoppage of the production process for an adjustment when the inspected item is non-conforming (then the production is restarted in-control, here denominated as corrective adjustment). Moreover, the articles related to this subject do not present semi-economical designs (which may yield high quantities of non-conforming items), as they do not include a policy of preventive adjustments (in such case no item is inspected), which can be more economical, mainly if the inspected item can be misclassified. In this article, the possibility of preventive or corrective adjustments in the process is decided at every m produced item. If a preventive adjustment is decided upon, then no item is inspected. On the contrary, the m-th item is inspected; if it conforms, the production goes on, otherwise, an adjustment takes place and the process restarts in-control. This approach is economically feasible for some practical situations and the parameters of the proposed procedure are determined minimizing an average cost function subject to some statistical restrictions (for example, to assure a minimal levelfixed in advanceof conforming items in the production process). Numerical examples illustrate the proposal.