Estudo da atividade de água em co-produtos da indústria de sucos: sementes de maracujá, casca de laranja e cascas de manga

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Parâmetros termodinâmicos da casca de laranja desidratada

The global energy scenario is currently a widely discussed topic, with growing concern about the future supplies. Thus, much attention has been dedicated to the utilization of biomass as an energy resource. In this respect, orange peel has become a material of great interest, especially to Brazil, which generates around 9.5 million tons of this waste per year. To this end, the authors studied the kinetics of the thermal processing of dried orange peel in inert and oxidizing atmosphere. The thermodynamic parameters were determined by the Ozawa-Flynn-Wall method for the global process observed during heating from the 25 degrees C up to 800 degrees C. The thermal analysis in air and nitrogen showed 3-2 stages of mass loss, respectively, with approximately 20% residual mass under a nitrogen atmosphere. The increase in the values of activation energy for the conversion points between 20% and 60% for thermal effects in air and nitrogen atmosphere was observed. The activation energy obtained in an oxidizing atmosphere was higher than that obtained under a nitrogen atmosphere. The fourier-transform infrared spectroscopy and X-ray diffraction analysis showed that the material has a high level of complexity with the presence of alkali and alkaline earth groups as well as phosphate, plus substances such as pectin, cellulose and lignin.

Estudo das propriedades mecânicas do concreto com adição de cinza de casca de arroz

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da fermentação fúngica no teor de compostos fenólicos em casca de café robusta

Coffee husk is an abundant by-product generated by the coffee industry and it can be used for the production of-value-added phenolic compounds. Currently, this residue has no commercial use due to the presence of anti-nutritional compounds and it is returned to the soil or burned. The aim of this study was to evaluate the content of phenolic compounds in Robusta coffee husk, the adequacy of this residue as substrate for fermentation processes, as well as evaluating the influence of fungal solid state fermentation to obtain phenolic compounds from this residue. In the present study, the use of different solvents for the extraction of polyphenols was evaluated and the content was found to be in the range of 96.9-159.5 mg of galic acid (GA).g(-1) substrate, depending on the solvent used. The best solvent was acetone, therefore it was selected for extraction. Studies were carried out to evaluate the effect of solid-state fermentation in the release of phenolic compounds, using the filamentous fungi Penicillium purpurogenum. The total phenolic content increased from 159.5 up to 243.2 mg GA.g(-1) substrate as a result the solid-state fermentation.

Análise da sustentabilidade ambiental de um cultivo de ostras em um estuário tropical

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da influência da cinza de casca de arroz e da cal nas propriedades do solo-cimento auto-adensável

Pós-graduação em Engenharia Civil - FEIS

Caracterização físico-mecânica de painéis de partículas de bambu com adição de casca de café

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização de hambúrguer elaborado com farinha de folhas de Moringa (Moringa oleífera Lam.)

The aim of this study was to determine the antioxidant activity of Moringa (Moringa oleifera Lam.) leaves flour in beef burger during storage for 120 days. Six hamburger formulations were processed: one control (without the use of additives), four with addition of Moringa leaves flour (0.10, 0.15, 0.20, and 0.25 g/100 g aggregate), and one with addition of synthetic antioxidant Propyl Gallate (0.01 g/100 g aggregate). The products were analyzed for their chemical composition with determinations of moisture, protein, dietary fiber, lipids, ash, carbohydrate, and caloric value after preparation. Microbiological and acceptance testing were performed at the beginning and after 120 days of storage. Determination of pH, instrumental color and lipid oxidation (TBARS) were performed at 1, 30, 60, 90 and 120 days of storage. All samples showed physical-chemical and microbiological tests in accordance with the Brazilian legislation. pH measurements were between 5.48 and 5.90; however, the intensity of red has changed according to the treatments and storage periods. The addition of Moringa leaves flour had no antioxidant effect on burgers, but its inclusion not only contributed to the improvement of nutritional quality, but also did not harm product acceptance.

Processo de flotação no tratamento da manipueira originada da fabricação de farinha de mandioca

Este trabalho teve como objetivo estudar o tratamento da manipueira pelo processo de flotação, visando estabelecer os melhores parâmetros operacionais a serem adotados, sem o uso de agentes químicos. Foram realizados os tratamentos em dois tipos de processo de flotação: por ar dissolvido e ar induzido, sendo as colunas desenvolvidas em acrílico e PVC para operação contínua em uma planta piloto. Os dois sistemas de flotação não demonstraram diferenças em relação à recuperção de proteínas, amidos e matéria graxa, porém, o processo de flotação por ar dissolvido torna a manipueira diluída devido ao volume de água utilizada, o que acaba gerando um volume de resíduo ainda maior e aumentando o custo do processo. Utilizando o processo por ar induzido, foram realizados ensaios variando vazão e temperatura, sendo os melhores resultados obtidos nas seguintes condições: vazão na faixa entre 120 e 420 mL/min e temperatura na faixa de 33 a 36 °C. Foi observada uma redução nos percentuais de remoção de matéria graxa e proteínas de 44,4% e 32,8%, respectivamente.

Elaboração de pão com casca de abacate hass: valor nutricional e aceitabilidade

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Pré-tratamento e hidrólise da casca de uva para liberação de açúcares fermentescíveis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Composição físico-química e propriedades tecnológicas da farinha de folhas de mandioca

Cassava leaves can be considered an important nutritional source when compared to other commonly consumed vegetables leaves. Cassava leaves have high levels of protein, fiber and minerals, and arestill underexplored due to the lack of information regarding the use of them as afood product, as well as, their use as an industrial raw material. The consumption of cassava leaves in fresh form is impractical due to the presence of cyanide, thereby it is required a pretreatment to be performed to reduce this component. The objective of this study was to produce and characterize the four made with cassava leaves as its chemical composition, color, indices of absorption and water solubility, and pasting properties, aiming to provide information of interest for possible application as an ingredient in the food industry. Cassava leaf flour showed low moisture content (6.6 %)and significant amounts of fiber (30.68 %), protein (23.00 %), and total carbohydrate (22.27%). Drying and milling processes allowed to obtain a flour with a low content of total cyanide (0.3 mg 100g-1 ), and the presence of vitamin C (56.6 mg 100g-1 ) and β –carotene (38 mg 100g- 1 ). The color analysis of cassava leaf flour showed low lightness with, predominantly, green and yellow pigments. The cassava leaf flour presented good solubility (14.85 %) and water absorption (6.87 g gel. g-1 ). Pasting properties showed a low peak of viscosity and a higher final viscosity with a retrogradation tendency, indicating a low capacity of this flour to form gel. The flour of cassava leaves can be a good source of nutrition when used as a food ingredient in soups and pasta. However, it is not indicated to products that require high gel formation.

Propriedades de pasta e térmicas de misturas instantâneas de farinha de soja, fécula e farelo de mandioca

The application of extrusion technology in the food industry has enabled the development of new commercial products of fast preparation, and maintaining the nutritional characteristics after the process. During this process there are changes in raw material due to the action of temperature, humidity and mechanical friction resulting in a modified product which can be used in various industrial applications. This work aimed to evaluate the effect of the composition of the raw material and operating conditions of the extrusion process on the properties of paste and thermal properties in the development of a functional instant flour of cassava and soybean. The results showed significant effects of all operating parameters on the rheological properties studied. The extruded flours showed no residual gelatinization enthalpy, suggesting that the starch in the samples was gelatinized. The experimental conditions of the smallest percentages of cassava residue (10%) and high soybean flour (25%) mixed with cassava starch, extrusion temperature of 75ºC and low screw speed (170rpm) leads to obtain instant flour with desirable characteristics.

Alterações nuricionais em casca e polpa de cenoura decorrentes de diferentes métodos de cozimento

The aim of this study was to verify the carrot cooking most suitable method to minimize nutrient losses. Carrot peel slices were subjected to pre cooking tests that were initiated with 0.5 min of duration and then increased in 0.5 min successively. The carrot pieces texture was monitored during the pre tests so all would havethe same texture independent of the type of cooking. The degree of softennes was evaluated by pressuring the pieces between the toes. The carrot pulp and pell were subjected to four types of heat treatment (pressure, immersion, microwave, and steam), after that they were pounded with a food processor and stored at -18 ºC. The nutritional analyses were as follow: The evalu determination of proteins, lipids, fibers, sugars reducers, total of ascorbic acid content and minerals (iron, calcium, zinc, magnesium, potassium, phosphorus, and calcium). The analyses were accomplished with fresh carrot and after cooking with the different methods. The peel of the carrot presented as amounts of proteins, lipids, fibers percentages, sugars reducers, total and ascorbic acid content equivalent to the pulp. In addition, the minerals content was superior in the peel in relation to the pulp, presenting respective percentages of 38,10%, 95,12%, 47,04%, 58,88%, 70,27% and 21,27%. There were nutrient losses in relation to the raw vegetable, when the carrot pieces were submitted to the different cooking methods. The methods of steaming and microwave had lower nutritional losses.

Manejo de minimelancia cultivada em fibra da casca de coco, sob ambiente protegido

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)