Fetal programming of pulmonary vascular dysfunction in mice: role of epigenetic mechanisms.

Insults during the fetal period predispose the offspring to systemic cardiovascular disease, but little is known about the pulmonary circulation and the underlying mechanisms. Maternal undernutrition during pregnancy may represent a model to investigate underlying mechanisms, because it is associated with systemic vascular dysfunction in the offspring in animals and humans. In rats, restrictive diet during pregnancy (RDP) increases oxidative stress in the placenta. Oxygen species are known to induce epigenetic alterations and may cross the placental barrier. We hypothesized that RDP in mice induces pulmonary vascular dysfunction in the offspring that is related to an epigenetic mechanism. To test this hypothesis, we assessed pulmonary vascular function and lung DNA methylation in offspring of RDP and in control mice at the end of a 2-wk exposure to hypoxia. We found that endothelium-dependent pulmonary artery vasodilation in vitro was impaired and hypoxia-induced pulmonary hypertension and right ventricular hypertrophy in vivo were exaggerated in offspring of RDP. This pulmonary vascular dysfunction was associated with altered lung DNA methylation. Administration of the histone deacetylase inhibitors butyrate and trichostatin A to offspring of RDP normalized pulmonary DNA methylation and vascular function. Finally, administration of the nitroxide Tempol to the mother during RDP prevented vascular dysfunction and dysmethylation in the offspring. These findings demonstrate that in mice undernutrition during gestation induces pulmonary vascular dysfunction in the offspring by an epigenetic mechanism. A similar mechanism may be involved in the fetal programming of vascular dysfunction in humans.

Simulation Supported Robot Programming using XML

The main objective of this master's thesis is to study robot programming using simulation software, and also how to embed the simulation software into company's own robot controlling software. The further goal is to study a new communication interface to the assembly line's components -more precisely how to connect the robot cell into this new communication system. Conveyor lines are already available where the conveyors use the new communication standard. The robot cell is not yet capable of communicating with to other devices using the new communication protocols. The main problem among robot manufacturers is that they all have their own communication systems and programming languages. There has not been any common programming language to program all the different robot manufacturers robots, until the RRS (Realistic Robot Simulation) standards were developed. The RRS - II makes it possible to create the robot programs in the simulation software and it gives a common user interface for different robot manufacturers robots. This thesis will present the RRS - II standard and the robot manufacturers situation for the RRS - II support. Thesis presents how the simulation software can be embedded into company's own robot controlling software and also how the robot cell can be connected to the CAMX (Computer Aided Manufacturing using XML) communication system.

Mobiilin työajanhallinnan ohjelmistokehitys

Työajan seuranta ja kohdistaminen oikeisiin kustannuslajeihin on yrityksen suorituskyvyn ja kasvun kannalta usein välttämättömyys. Tässä työssä tutkitaan mobiiliteknologioiden mahdollisuuksia ja soveltuvuutta tuottaa palveluita työajan hallinnointiin, valitaan sopiva arkkitehtuuri ja kehitetään Java ME –teknologialla prototyyppi, joka on helposti integroitavissa yrityksen nykyisiin palvelinpuolen järjestelmiin ja tietokantoihin. Työn sovellusosuudessa kuvataan prototyypin ohjelmoinnissa käytetyt työkalut, menetelmät, ongelmakohdat sekä niiden ratkaisut. Suunnitelluissa käyttötapauksissa tapahtumatiedot syötetään manuaalisesti puhelimen käyttöliittymän kautta tai automatisoidummin kerätään kustannuskohdistetietoa työkohteisiin sijoitetuista NFC-tageista. Työaikaleimaamista testattiin emulaattorilla ja oikealla matkapuhelimella. Lopputuloksena asiakkaan työajanhallinnan tapahtumat siirtyvät langattomasti ja reaaliaikaisesti yrityksen webpalvelimelle JSON-formaatissa.

Object-oriented Programming Applied to the Development of Structural Analysis and Optimization Software

This paper presents the development of a two-dimensional interactive software environment for structural analysis and optimization based on object-oriented programming using the C++ language. The main feature of the software is the effective integration of several computational tools into graphical user interfaces implemented in the Windows-98 and Windows-NT operating systems. The interfaces simplify data specification in the simulation and optimization of two-dimensional linear elastic problems. NURBS have been used in the software modules to represent geometric and graphical data. Extensions to the analysis of three-dimensional problems have been implemented and are also discussed in this paper.

Applying Qt to programming courses

Työn tavoitteena on sovittaa Qt opetussuunnitelmaan. Työ sisältää Qt:n lyhyen historian sekä katsauksen sen nykytilaan. Nykytilakatsaus sisältää kolme näkökulmaa: miten ja missä Qt:ta voidaan käyttää, sekä sen käyttötarkoitukset teollisuudessa ja opetuksessa. Työn tuloksena syntyy luentodemonstraatiota varten pieni ohjelma, joka on luotu C++:n ja Qt Designerin avulla ja käyttää olennaisia käyttöliittymäkirjaston olioita. Toisena tuotteena työssä syntyy luonnos Lappeenrannan Teknillisen Yliopiston ohjelmointikursseista, joissa Qt:ta voitaisiin käyttää avustamaan opiskelijoita näkemään, miten graafinen ohjelma luodaan sekä valmentaa heitä ymmärtämään viitekehyksien ja graafisten kirjastojen tuomat edut.

An examination of factors influencing ERP key-user satisfaction: A qualitative case study

Several companies are trying to improve their operation efficiency by implementing an enterprise resource planning (ERP) system that makes it possible to control the resources of the company in real time. However, the success of the implementation project is not a foregone conclusion; a significant part of these projects end in a failure, one way or another. Therefore it is important to investigate ERP system implementation more closely in order to increase understanding about factors influencing ERP system success and to improve the probability of a successful ERP implementation project. Consequently, this study was initiated because a manufacturing case company wanted to review the success of their ERP implementation project. To be exact, the case company hoped to gain both information about the success of the project and insight for future implementation improvement. This study investigated ERP success specifically by examining factors that influence ERP key-user satisfaction. User satisfaction is one of the most commonly applied indicators of information system success. The research data was mainly collected by conducting theme interviews. The subjects of the interviews were six key-users of the newly implemented ERP system. The interviewees were closely involved in the implementation project. Furthermore, they act as representative users that utilize the new system in everyday business processes. The collected data was analyzed by thematizing. Both data collection and analysis were guided by a theoretical frame of reference. This frame was based on previous research on the subject. The results of the study aligned with the theoretical framework to large extent. The four principal factors influencing key-user satisfaction were change management, contractor service, key-user’s system knowledge and characteristics of the ERP product itself. One of the most significant contributions of the research is that it confirmed the existence of a connection between change management and ERP key-user satisfaction. Furthermore, it discovered two new sub-factors influencing contractor service related key-user satisfaction. In addition, the research findings indicated that in order to improve the current level of key-user satisfaction, the case company should pay special attention to system functionality improvement and enhancement of the key-users’ knowledge. During similar implementation projects in the future, it would be important to assure the success of change management and contractor service related processes.

A SOA-based Framework for Multi-Devices and Multi-Platform User Interfaces

This thesis reports investigations on applying the Service Oriented Architecture (SOA) approach in the engineering of multi-platform and multi-devices user interfaces. This study has three goals: (1) analyze the present frameworks for developing multi-platform and multi-devices applications, (2) extend the principles of SOA for implementing a multi-platform and multi-devices architectural framework (SOA-MDUI), (3) applying and validating the proposed framework in the context of a specific application. One of the problems addressed in this ongoing research is the large amount of combinations for possible implementations of applications on different types of devices. Usually it is necessary to take into account the operating system (OS), user interface (UI) including the appearance, programming language (PL) and architectural style (AS). Our proposed approach extended the principles of SOA using patterns-oriented design and model-driven engineering approaches. Synthesizing the present work done in these domains, this research built and tested an engineering framework linking Model-driven Architecture (MDA) and SOA approaches to developing of UI. This study advances general understanding of engineering, deploying and managing multi-platform and multi-devices user interfaces as a service.

Adopting the Vaadin Java framework to rebuild VTT’s Web Interfaces and Database Applications

With the growth in new technologies, using online tools have become an everyday lifestyle. It has a greater impact on researchers as the data obtained from various experiments needs to be analyzed and knowledge of programming has become mandatory even for pure biologists. Hence, VTT came up with a new tool, R Executables (REX) which is a web application designed to provide a graphical interface for biological data functions like Image analysis, Gene expression data analysis, plotting, disease and control studies etc., which employs R functions to provide results. REX provides a user interactive application for the biologists to directly enter the values and run the required analysis with a single click. The program processes the given data in the background and prints results rapidly. Due to growth of data and load on server, the interface has gained problems concerning time consumption, poor GUI, data storage issues, security, minimal user interactive experience and crashes with large amount of data. This thesis handles the methods by which these problems were resolved and made REX a better application for the future. The old REX was developed using Python Django and now, a new programming language, Vaadin has been implemented. Vaadin is a Java framework for developing web applications and the programming language is extremely similar to Java with new rich components. Vaadin provides better security, better speed, good and interactive interface. In this thesis, subset functionalities of REX was selected which includes IST bulk plotting and image segmentation and implemented those using Vaadin. A code of 662 lines was programmed by me which included Vaadin as the front-end handler while R language was used for back-end data retrieval, computing and plotting. The application is optimized to allow further functionalities to be migrated with ease from old REX. Future development is focused on including Hight throughput screening functions along with gene expression database handling

Winâ Foy : functional object-oriented programming language

This thesis will introduce a new strongly typed programming language utilizing Self types, named Win--*Foy, along with a suitable user interface designed specifically to highlight language features. The need for such a programming language is based on deficiencies found in programming languages that support both Self types and subtyping. Subtyping is a concept that is taken for granted by most software engineers programming in object-oriented languages. Subtyping supports subsumption but it does not support the inheritance of binary methods. Binary methods contain an argument of type Self, the same type as the object itself, in a contravariant position, i.e. as a parameter. There are several arguments in favour of introducing Self types into a programming language (11. This rationale led to the development of a relation that has become known as matching [4, 5). The matching relation does not support subsumption, however, it does support the inheritance of binary methods. Two forms of matching have been proposed (lJ. Specifically, these relations are known as higher-order matching and I-bound matching. Previous research on these relations indicates that the higher-order matching relation is both reflexive and transitive whereas the f-bound matching is reflexive but not transitive (7]. The higher-order matching relation provides significant flexibility regarding inheritance of methods that utilize or return values of the same type. This flexibility, in certain situations, can restrict the programmer from defining specific classes and methods which are based on constant values [21J. For this reason, the type This is used as a second reference to the type of the object that cannot, contrary to Self, be specialized in subclasses. F-bound matching allows a programmer to define a function that will work for all types of A', a subtype of an upper bound function of type A, with the result type being dependent on A'. The use of parametric polymorphism in f-bound matching provides a connection to subtyping in object-oriented languages. This thesis will contain two main sections. Firstly, significant details concerning deficiencies of the subtype relation and the need to introduce higher-order and f-bound matching relations into programming languages will be explored. Secondly, a new programming language named Win--*Foy Functional Object-Oriented Programming Language has been created, along with a suitable user interface, in order to facilitate experimentation by programmers regarding the matching relation. The construction of the programming language and the user interface will be explained in detail.

Automatic Structure Generation using Genetic Programming and Fractal Geometry

Three dimensional model design is a well-known and studied field, with numerous real-world applications. However, the manual construction of these models can often be time-consuming to the average user, despite the advantages o ffered through computational advances. This thesis presents an approach to the design of 3D structures using evolutionary computation and L-systems, which involves the automated production of such designs using a strict set of fitness functions. These functions focus on the geometric properties of the models produced, as well as their quantifiable aesthetic value - a topic which has not been widely investigated with respect to 3D models. New extensions to existing aesthetic measures are discussed and implemented in the presented system in order to produce designs which are visually pleasing. The system itself facilitates the construction of models requiring minimal user initialization and no user-based feedback throughout the evolutionary cycle. The genetic programming evolved models are shown to satisfy multiple criteria, conveying a relationship between their assigned aesthetic value and their perceived aesthetic value. Exploration into the applicability and e ffectiveness of a multi-objective approach to the problem is also presented, with a focus on both performance and visual results. Although subjective, these results o er insight into future applications and study in the fi eld of computational aesthetics and automated structure design.

User Generated Content in Researching for Design: How the Internet Supports Creativity

Résumé Cette recherche a débuté avec l’idée que l’Internet est en train de changer la manière dont nous créons des connaissances et du contenu culturel. Notre point de départ était d’utiliser l’Internet afin de rassembler et amplifier plusieurs points de vue dans un processus de design. Une approche complexe a exposé l’Internet comme un système et conséquemment comme une plateforme pour l’innovation. La structure ouverte de l’Internet a soutenu le mouvement participatif des usagers qui ont choisi de partager leurs besoins, leurs désirs et leurs solutions. Notre recherche a pour but d’étudier ce contenu généré par les usagers en ligne et comprendre sa valeur pour les designers. Les usagers créatifs veulent s’exprimer et participer activement dans le processus de design. Notre recherche tente de démontrer que les designers ont beaucoup à apprendre du contenu généré par les usagers car ceux-ci soumettent des éléments qui ont attrait à toutes les étapes du processus de design et révèlent des relations présentes dans la situation de design à l’étude. Pour en apprendre plus sur ce contenu nous nous demandons : Quel type d’information offre le contenu généré par les usagers pour la phase de recherche dans le processus de design. Afin de centrer la portée de l’étude, nous nous sommes aussi questionné si cette information est plus pertinente au design de produits, au design de services ou au design de système de produits et de services. Aspirant aux idéaux du design participatif, notre méthodologie fut développée afin d’apprendre comment le contenu généré par les usagers pourrait influencer le processus de design. Pour ce faire, nous avons choisi de chercher sur l’Internet pour du contenu qui concerne la mobilité via l’usage d’une automobile. Les trois différents types de média considérés étaient les vidéos sur YouTube, les images sur Flickr et les textes sur Blogger. Afin de répondre à notre première question de recherche, nous nous sommes penchés sur deux éléments lorsque l’on recherche pour le design : les espaces de design et les relations de design. Premièrement, nous avons catégorisé le contenu récolté selon l’espace problème, créatif et solution. Deuxièmement, nous avons catégorisé le contenu dépendant de laquelle des relations de design elle démontrait soit une combinaison d’usagers, objets et contextes. Dans le but de répondre à la deuxième question de cette recherche, nous avons examiné trois types V de produits de design : les automobiles privées comme produit, le partage de voiture comme système de produit et de service, et le taxi comme service. Chaque élément pertinent généré par les usagés trouvé dans cette recherche fut catégorisé jusqu’à ce que l’on récolte 50 échantillons pour chaque combinaison de ces variables. Nous en sommes arrivés avec une matrice de 50 éléments de chaque produit de design, pour chacun des médias, puis catégorisé selon les espaces de design et les relations dans le design. Cette recherche démontre que l’Internet, comme médium, produit les conditions avantageuses pour que les usagers partagent de grandes quantités de contenu original et diversifié qui est pertinent aux situations de design. À partir de nos données de recherche, nous avons identifié des tendances dans le contenu généré par les usagers. Notamment, nous sommes en mesure d’affirmer que le contenu généré par les usagers offre de l’information pertinente à la recherche pour le design, et ce dans tous les espaces de design et toutes les relations de design. Il en fut de même pour les différentes issues du design car du contenu sur les produits, les systèmes de produits et de services et les services était présent et pertinent. Bref, nous avons démontré que l’Internet supporte la créativité et conséquemment il y abonde de contenu créatif produit par les usagers. Suivant dans les traces dessinées par d’autres chercheurs en design participatif, cette étude devrait être considérée comme un nouvel exemple des moyens qu’ont les designers pour percevoir les besoins tacites des usagers en leur permettant d’exprimer leurs idées. Alors que ceux-ci créent librement et intuitivement ainsi exposant leurs besoins, solutions et idées, les designers peuvent porter un regard de tierce partie sur les résultats. Jumelant des techniques comme le crowdsourcing et le brainstorming, nous avons créé une nouvelle activité et le néologisme : brainsourcing. En demeurant dans une forme de pratique réflexive, les designers peuvent réfléchir et ajouter au contenu généré par les usagers qui lui n’est pas biaisé par une éducation ou une culture du design. Ce processus est similaire au design participatif professionnel où le brainsourcing est une activité parallèle lorsque le designer fait des recherches pour le design. C’est cette perspective sur la somme des idées des participants qui peut contribuer à comprendre la complexité de la situation de design. VI Cette recherche a aussi soulevé des questions par rapport à l’effet de démocratisation de l’Internet. Bien que les usagers n’ont pas l’éducation, ni les habiletés des designers, ils aspirent à démocratiser le processus du design en voulant participer activement et en exposant leurs besoins, idées et solutions. Nous avons pu déterminer que les usagers n’étaient pas qualifiés pour entreprendre le processus complet du design comme les designers professionnels, mais nous avons observé directement la capacité des usagers à mettre de l’avant leur créativité. À propos de la relation entre les usagers créatifs et les designers, nous avons étudié des langages communs tels les scénarios et les prototypes. Tous deux sont présents dans le contenu généré par les usagers que nous avons récolté dans nos recherches sur Internet. Ceci nous a mené vers une nouvelle perspective sur l’activité du design où des opportunités créatives ressortent d’une conversation avec les usagers. Cette recherche a dévoilé de grandes tendances dans la manière dont les usagers communiquent naturellement dans un processus de design. Nous espérons avoir offert un aperçu de comment les designers peuvent prendre avantage de tous les types de contenu généré par les usagers en ligne. Dans le futur, nous souhaitons que les designers aient la possibilité d’interagir avec les participants en prenant le rôle de facilitateur de la conversation. La responsabilité du résultat ne tombe pas sur les épaules du designer car son mandat est d’assurer le bon fonctionnement du processus. Les designers rejoignent les usagers en ne demandant plus comment les choses peuvent être créées, mais pourquoi elles devraient exister. En tant que designers, nous aspirons à générer plus à partir de nouvelles connaissances, nous aspirons à créer plus de sens. Mots clés: Recherche en design, complexité, design participatif, contenu généré par les usagers, démocratisation, Internet, créativité, crowdsourcing, brainstorming, brainsourcing, réflexion-en-action.

Event Driven Programming in Java

Event driven programming is a way of writing a program that works by responding to things happening (rather than executing a preplanned series of tasks). It is most often used to manage more advanced user interactions, such as GUI programs. In this session we look at how event driven programming works in Java GUIs, as both an introduction to events (using MouseListeners), and also to the way that GUI programs are constructed.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.

EZ-BUD : orçamentação na nuvem

Não é novidade que o paradigma vigente baseia-se na Internet, em que cada vez mais aplicações mudam o seu modelo de negócio relativamente a licenciamento e manutenção, para passar a oferecer ao utilizador final uma aplicação mais acessível no que concerne a licenciamento e custos de manutenção, já que as aplicações se encontram distribuídas eliminando os custos de capitais e operacionais inerentes a uma arquitetura centralizada. Com a disseminação das Interfaces de Programação de Aplicações (Application Programming Interfaces – API) baseadas na Internet, os programadores passaram a poder desenvolver aplicações que utilizam funcionalidades disponibilizadas por terceiros, sem terem que as programar de raiz. Neste conceito, a API das aplicações Google® permitem a distribuição de aplicações a um mercado muito vasto e a integração com ferramentas de produtividade, sendo uma oportunidade para a difusão de ideias e conceitos. Este trabalho descreve o processo de conceção e implementação de uma plataforma, usando as tecnologias HTML5, Javascript, PHP e MySQL com integração com ®Google Apps, com o objetivo de permitir ao utilizador a preparação de orçamentos, desde o cálculo de preços de custo compostos, preparação dos preços de venda, elaboração do caderno de encargos e respetivo cronograma.

Running Climate Models On The NERC Cluster Grid Using G-Rex

Compute grids are used widely in many areas of environmental science, but there has been limited uptake of grid computing by the climate modelling community, partly because the characteristics of many climate models make them difficult to use with popular grid middleware systems. In particular, climate models usually produce large volumes of output data, and running them usually involves complicated workflows implemented as shell scripts. For example, NEMO (Smith et al. 2008) is a state-of-the-art ocean model that is used currently for operational ocean forecasting in France, and will soon be used in the UK for both ocean forecasting and climate modelling. On a typical modern cluster, a particular one year global ocean simulation at 1-degree resolution takes about three hours when running on 40 processors, and produces roughly 20 GB of output as 50000 separate files. 50-year simulations are common, during which the model is resubmitted as a new job after each year. Running NEMO relies on a set of complicated shell scripts and command utilities for data pre-processing and post-processing prior to job resubmission. Grid Remote Execution (G-Rex) is a pure Java grid middleware system that allows scientific applications to be deployed as Web services on remote computer systems, and then launched and controlled as if they are running on the user's own computer. Although G-Rex is general purpose middleware it has two key features that make it particularly suitable for remote execution of climate models: (1) Output from the model is transferred back to the user while the run is in progress to prevent it from accumulating on the remote system and to allow the user to monitor the model; (2) The client component is a command-line program that can easily be incorporated into existing model work-flow scripts. G-Rex has a REST (Fielding, 2000) architectural style, which allows client programs to be very simple and lightweight and allows users to interact with model runs using only a basic HTTP client (such as a Web browser or the curl utility) if they wish. This design also allows for new client interfaces to be developed in other programming languages with relatively little effort. The G-Rex server is a standard Web application that runs inside a servlet container such as Apache Tomcat and is therefore easy to install and maintain by system administrators. G-Rex is employed as the middleware for the NERC1 Cluster Grid, a small grid of HPC2 clusters belonging to collaborating NERC research institutes. Currently the NEMO (Smith et al. 2008) and POLCOMS (Holt et al, 2008) ocean models are installed, and there are plans to install the Hadley Centre’s HadCM3 model for use in the decadal climate prediction project GCEP (Haines et al., 2008). The science projects involving NEMO on the Grid have a particular focus on data assimilation (Smith et al. 2008), a technique that involves constraining model simulations with observations. The POLCOMS model will play an important part in the GCOMS project (Holt et al, 2008), which aims to simulate the world’s coastal oceans. A typical use of G-Rex by a scientist to run a climate model on the NERC Cluster Grid proceeds as follows :(1) The scientist prepares input files on his or her local machine. (2) Using information provided by the Grid’s Ganglia3 monitoring system, the scientist selects an appropriate compute resource. (3) The scientist runs the relevant workflow script on his or her local machine. This is unmodified except that calls to run the model (e.g. with “mpirun”) are simply replaced with calls to "GRexRun" (4) The G-Rex middleware automatically handles the uploading of input files to the remote resource, and the downloading of output files back to the user, including their deletion from the remote system, during the run. (5) The scientist monitors the output files, using familiar analysis and visualization tools on his or her own local machine. G-Rex is well suited to climate modelling because it addresses many of the middleware usability issues that have led to limited uptake of grid computing by climate scientists. It is a lightweight, low-impact and easy-to-install solution that is currently designed for use in relatively small grids such as the NERC Cluster Grid. A current topic of research is the use of G-Rex as an easy-to-use front-end to larger-scale Grid resources such as the UK National Grid service.