Vesistöjen hyödyntäminen rakennusten lämmityksessä ja jäähdytyksessä

Suomen kokonaisenergiankulutuksesta noin viidesosa kuluu rakennusten lämmitykseen. Ilmastosopimuksien ja tiukentuvien päästömääräyksien vuoksi rakennusten lämmitys- jajäähdytysenergian tuotantoa täytyisi saada energiatehokkaammaksi. Energian kulutuksen vähentäminen onnistuu muun muassa lisäämällä rakennusten omaenergian tuottoa, jota on esimerkiksi lämpöpumpuilla tapahtuva rakennusten lämmitys. Samalla päästöjen määrä pienenee. Rakennusten energiatehokkuusluvun määritys tulee muuttumaan energiamuotojen kertoimiin pohjautuvaksi kokonaisenergiatarkasteluksi. Tämä ohjaa rakennusten energiantuotantoa kaukolämmitykseen ja erilaisiin lämpöpumppuratkaisuihin perustuvaksi. Diplomityössä tutkitaan tapoja, joilla pystytään hyödyntämään vesistöjä rakennusten lämmitykseen ja jäähdytyksen ja saamaan samalla energiankulutusta ja päästöjä pienemmiksi. Lisäksi työssä selvitetään vesistöistä saatavan energian määrää ja käyttökohteita.

Utilization of Automatic Meter Reading in the Improvement of a District Heating System

A district heating system comprises production facilities, a distribution network, and heat consumers. The utilization of new energy metering and reading system (AMR) is increasing constantly in district heating systems. This heuristic study shows how the AMR system can be exploited in finding optimization opportunities in district heating system. In this study, the district heating system is mainly considered from the viewpoint of operational optimization. The focus is on the core processes, heat production and distribution. Three objectives were set to this study. The first one was to examine general optimization opportunities in district heating systems. Second, to figure out the benefits of AMR for general optimization opportunities. Finally, to define a methodology for process improvement endeavors. This study shows, through a case study, the usefulness of AMR in specifying current deficiencies in a district heating system. Based on a literature review, the methodology for the improvement of business processes is presented. Additionally, some issues related to future competitiveness of district heating are concerned. As a conclusion, some optimization objectives are considered more desirable than others. Study shows that AMR is useful in the specification of optimization targets in the district heating system. Further steps in optimization process were not examined in detail. That would seem to be interesting topic for further studies.

Rural Food System Change in Tanzania during the Post-Ujamaa Era. A Case Study from Western Bagamoyo District

Food systems in Sub-Saharan Africa have been rapidly transforming during the recent decades with diverse outcomes on human development and environment. This study explores the food system change in rural villages in eastern Tanzania where subsistence agriculture has traditionally been the main source of livelihood. The focus is on the salient changes in the spatial dimensions and structural composition of the food system in the context of economic liberalization that has taken place after the end of the socialist ujamaa era in the mid-1980s. In addition, the linkages of the changes are examined in relation to food security, socio-economic situation, livelihoods, and local environment. The approach of the study is geographical, but also involves various multi-disciplinary elements, particularly from development studies. The research methods included thematic and questionnaire interviews, participatory tools, and the analysis of land use/ cover data and official documents. Several earlier studies that were made in the area during the late 1970s and 1980s provided an important reference base. The study shows that subsistence farming has lost its dominant role in food provisioning due to the declining productivity of land, livestock losses, and the increasing shift of labour to non-farm sectors. Also rapid population growth has added to the pressure on land and other natural resources. Despite the increasing need for money for buying marketed foods and other necessities, the nutritional situation shows improvement and severe malnutrition has diminished. However, the long-term sustainability of this transformation raises concerns. Firstly, the food security situation continues to be fragile and prone to shocks such as adverse climatic conditions, crop failures and price hikes. Secondly, the commodification of the food system and livelihoods in general is linked to rapid environmental degradation in the area, particularly the loss of soil fertility and deforestation. The situation calls for efforts that take more determined and holistic approaches towards sustainable development of the rural food system with particular focus on the role and viability of small-scale farming.

Kaukolämpöverkon paluuveden hyödyntäminen lämmityksessä

Tässä diplomityössä on määritetty paluuvesilämmityksen mahdollisuudet Savon Voima Oyj:n kaukolämpöpaikkakunnilla. Työssä tarkasteltiin paluuvesilämmityksen tuoman paremman kaukolämpöveden jäähtymän vaikutuksia kaukolämpöverkkoon ja energiantuotantoon sekä laskettiin esimerkkipaikkakunnilla kaukolämmön paluuveden lämpötilan alentumisen tuomat rahalliset hyödyt. Lisäksi tarkasteltiin paluuvesilämmityksen taloudellisuutta esimerkkipaikkakunnilla. Laskennassa saatiin paluuvesilämmityksen tuomaksi jäähtymähyödyksi pumppauskustannuksissa 0,7 – 0,8 €/MWh ja lämpöhäviöissä 1,5 – 2,9 €/MWh. Iisalmessa sähköntuotannon lisääntymisestä saadaan hyötyä 0,7 €/MWh. Suurin hyöty saadaan Pielaveden ja Suonenjoen biolämpökeskusten lämmöntalteenotolla varustetuista savukaasupesureista. Pielavedellä tämä hyöty on 6,4 €/MWh ja Suonenjoella 6,1 €/MWh. Paluuvesilämmityksen kannattavuus asuinkiinteistöissä vaatii lämmöntuotannon yhteydessä olevan savukaasupesurin tuoman rahallisen hyödyn. Esimerkiksi Iisalmessa asiakkaalle myönnettävissä oleva jäähtymähyvitys paluuvesilämmöstä ei riitä kattamaan paluuvesilämmityksen suurempia investointikuluja. Myös pesuripaikkakunnilla kannattavuus vaatii suuren vuosittaisen lämmönkäytön. Tavoiteltaessa 8 vuoden korollista takaisinmaksuaikaa vaatii kannattavuus kohteelta Pielavedellä 250 MWh:n ja Suonejoella 300 MWh:n vuosittaisen lämmönkäytön. Myös asiakkaan sijainnin sopivuus kaukolämpöverkossa paluuvesilämmitykseen täytyy tarkastella tapauskohtaisesti. Paluuvesilämmitys ei tule työn tulosten perusteella tulevaisuudessa yleisesti käyttöön, mutta yksittäisiä asiakkaita siihen voidaan liittää.

Control system for forced-air cooling of horticultural products

This work is a study of the implementation of a classical controller using a tuning method referred to as IMC (Internal Model Control) and aimed at the reduction of electrical energy consumption by the appropriate relation between energy consumption and the cooling time with forced air. The supervisory system installed was able to manipulate the variable of frequency of the signal power of the exhaust fan engine (forced air module), to accelerate or decelerate the loss of heat from the product to be cooled by airflow variation that passes through the mass of the produce. The results demonstrated a reduction in energy consumption from 64% and an increase of only 8% in the cooling time to the system using PI/IMC (Proportional - Integral with IMC) tuning method compared with the system in its operating nominal condition. This PI/IMC control may be implemented directly in a frequency converter, without the need to purchase a computer or PLC (programmable logic controller) to run the dedicated application, increasing its economical viability.

Modeling and simulation of forced-air cooling of strawberries using variable convective coefficient

In the forced-air cooling process of fruits occurs, besides the convective heat transfer, the mass transfer by evaporation. The energy need in the evaporation is taken from fruit that has its temperature lowered. In this study it has been proposed the use of empirical correlations for calculating the convective heat transfer coefficient as a function of surface temperature of the strawberry during the cooling process. The aim of this variation of the convective coefficient is to compensate the effect of evaporation in the heat transfer process. Linear and exponential correlations are tested, both with two adjustable parameters. The simulations are performed using experimental conditions reported in the literature for the cooling of strawberries. The results confirm the suitability of the proposed methodology.

The impact of evaporative cooling on the thermoregulation and sensible heat loss of sows during farrowing

Pigs are more sensitive to high environmental temperatures explained by the inability of sweating and panting properly when compared to other species of farmed livestock. The evaporative cooling system might favor the thermal comfort of animals during exposure to extreme environmental heat and reduce the harmful effects of heat stress. The purpose of this study was to assess the sensible heat loss and thermoregulation parameters from lactating sows during summer submitted to two different acclimatization systems: natural and evaporative cooling. The experiment was carried out in a commercial farm with 72 lactating sows. The ambient variables (temperature, relative humidity and air velocity) and sows physiological parameters (rectal temperature, surface temperature and respiratory rate) were monitored and then the sensible heat loss at 21days lactation was calculated. The results of rectal temperature did not differ between treatments. However, the evaporative cooling led to a significant reduction in surface temperature and respiratory rate and a significant increase in the sow's sensible heat loss. It was concluded that the use of evaporative cooling system was essential to increase sensible heat loss; thus, it should reduce the negative effects of heat on the sows' thermoregulation during summer.

The Saima district Savonlinna-Kuopio

kuv., 11 x 17 cm

The most beautiful district of Finland

kuv., 11 x 17 cm

Matalalämpötilaisen hukkalämmön hyödyntäminen kaukolämmön tuotannossa

Työ käsittelee tekniikoita, joilla voidaan hyödyntää matalalämpötilaisia hukkalämpöjä kaukolämmöntuotannossa. Työ esittelee lämpöpumpputekniikkaa, jolla hukkalämmön lähteestä tulevaa lämpöä voidaan lämpötilaltaan nostaa kaukolämpöverkon tarpeita vastaavaksi. Työssä käsitellään lämpöpumppujen kylmäaineita ja niiden soveltuvuutta eri lämpötila-alueisiin. Lisäksi käsitellään hyödyntämisen taloudellisuutta ja ympäristövaikutuksia. Taloudellisuudessa käsitellään investointi- ja käyttökustannukset ja pohditaan niiden pohjalta tuotteiden kaukolämpö- ja kaukokylmähinnoittelua asiakkaille. Työ myös tarkastelee hankkeen kokonaiskannattavuutta Mäntsälän Sähkölle. Kannattavuuslaskelmissa toteutetaan herkkyystarkastelu suurimpien muuttujien osalta. Työ tarkastelee yhdistetyn kylmän- ja lämmöntuotannon soveltuvuutta Mäntsälän keskustan kaukolämpöverkon ja Kapulin kaukolämpöverkon alueelle. Soveltuvuutta tarkastellaan Suomessa ja maailmalla toteutettujen referenssien pohjalta.

Two-dimensional atom localization and Raman cooling of tripod-type atoms

Both atom localization and Raman cooling, considered in the thesis, reflect recent progress in the area of all-optical methods. We focus on twodimensional (2D) case, using a four-level tripod-type atomic scheme for atom localization within the optical half-wavelength as well as for efficient subrecoil Raman cooling. In the first part, we discuss the principles of 1D atom localization, accompanying by an example of the measurement of a spontaneously-emitted photon. Modifying this example, one archives sub-wavelength localization of a three-level -type atom, measuring the population in its upper state. We go further and obtain 2D sub-wavelength localization for a four-level tripod-type atom. The upper-state population is classified according to the spatial distribution, which in turn forms such structures as spikes, craters and waves. The second part of the thesis is devoted to Raman cooling. The cooling process is controlled by a sequence of velocity-selective transfers from one to another ground state. So far, 1D deep subrecoil cooling has been carried out with the sequence of square or Blackman pulses, applied to -type atoms. In turn, we discuss the transfer of atoms by stimulated Raman adiabatic passage (STIRAP), which provides robustness against the pulse duration if the cooling time is not in any critical role. A tripod-type atomic scheme is used for the purpose of 2D Raman cooling, allowing one to increase the efficiency and simplify the realization of the cooling.

Wind Turbine Direct-Drive Permanent-Magnet Generator with Direct Liquid Cooling for Mass Reduction

Today’s electrical machine technology allows increasing the wind turbine output power by an order of magnitude from the technology that existed only ten years ago. However, it is sometimes argued that high-power direct-drive wind turbine generators will prove to be of limited practical importance because of their relatively large size and weight. The limited space for the generator in a wind turbine application together with the growing use of wind energy pose a challenge for the design engineers who are trying to increase torque without making the generator larger. When it comes to high torque density, the limiting factor in every electrical machine is heat, and if the electrical machine parts exceed their maximum allowable continuous operating temperature, even for a short time, they can suffer permanent damage. Therefore, highly efficient thermal design or cooling methods is needed. One of the promising solutions to enhance heat transfer performances of high-power, low-speed electrical machines is the direct cooling of the windings. This doctoral dissertation proposes a rotor-surface-magnet synchronous generator with a fractional slot nonoverlapping stator winding made of hollow conductors, through which liquid coolant can be passed directly during the application of current in order to increase the convective heat transfer capabilities and reduce the generator mass. This doctoral dissertation focuses on the electromagnetic design of a liquid-cooled direct-drive permanent-magnet synchronous generator (LC DD-PMSG) for a directdrive wind turbine application. The analytical calculation of the magnetic field distribution is carried out with the ambition of fast and accurate predicting of the main dimensions of the machine and especially the thickness of the permanent magnets; the generator electromagnetic parameters as well as the design optimization. The focus is on the generator design with a fractional slot non-overlapping winding placed into open stator slots. This is an a priori selection to guarantee easy manufacturing of the LC winding. A thermal analysis of the LC DD-PMSG based on a lumped parameter thermal model takes place with the ambition of evaluating the generator thermal performance. The thermal model was adapted to take into account the uneven copper loss distribution resulting from the skin effect as well as the effect of temperature on the copper winding resistance and the thermophysical properties of the coolant. The developed lumpedparameter thermal model and the analytical calculation of the magnetic field distribution can both be integrated with the presented algorithm to optimize an LC DD-PMSG design. Based on an instrumented small prototype with liquid-cooled tooth-coils, the following targets have been achieved: experimental determination of the performance of the direct liquid cooling of the stator winding and validating the temperatures predicted by an analytical thermal model; proving the feasibility of manufacturing the liquid-cooled tooth-coil winding; moreover, demonstration of the objectives of the project to potential customers.

Asuinkerrostalon lämmöntuottojärjestelmän optimointi elinkaarikustannusten perusteella hyödynnettäessä lämpöpumpulla useita lämmönlähteitä

The basis of this thesis was to optimize heat pump that uses multiple heat sources to get competitive heating system for residential building when life cycle costs are considered. The objectives were to compile necessary information to calculate life cycle costs for heating system of residential building and start to compose of designing program for heat pump based heating systems. Examinations were made for the purchase energy need of residential building. Features of heat pump, considered refrigerant and potential heat sources were examined to find out heat production potential of heat pumps. Necessary information for life cycle cost calculation was also examined. Collected data was used in two case analyses to design selected heat production systems and calculate their life cycle costs. On the basis of case analyses heat pump based hybrid heat production systems are very competitive on life cycle cost comparison against district heating when residential building uses a lot of energy. New buildings use considerably less energy and achieved energy cost savings with heat pump systems may not be enough to cover the relatively high investment cost in reasonable time period compared to district heating system. The calculation method was found to require further development to at least include the cooling energy need of the building. Cooling demand will continue to grow in the future, which improves the heat pump based heat production systems competitiveness compared to other systems.

Floristic composition of a conservation area in the Federal District of Brazil

Cerradão vegetation shares many species with savanna and forest areas and is one of the most vulnerable phytophysiognomies in the Cerrado (Brazilian savanna) biome. The floristic composition of the Cerradão Biological Reserve was examined between September/2007 and November/2008. A total of 282 species distributed among 194 genera and 75 families were encountered, demonstrating proportions of 0.91 herbaceous species and 0.54 shrub species for each tree species. Fabaceae, Asteraceae, Rubiaceae, Poaceae, Myrtaceae, Malpighiaceae, and Melastomataceae were the most species-rich families. Fully 72.3% of the species of this dystrophic cerradão were shared by cerrado and forest vegetations, while 60.43% were shared by other cerradão sites, although the largest proportion of species (91%) were shared with cerrado sensu stricto. No species was found to be exclusive to this cerradão site, but approximately 95% of all species were native to the Cerrado biome.