605 resultados para disks
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The complete I-V characteristics of SnO(2)-based varistors, particularly of the Pianaro system SCNCr consisting in 98.9%SnO(2)+1%CoO+0.05%Nb(2)O(5)+0.05%Cr(2)O(3), all in mol%, have been seldom reported in the literature. A comparative study at low and high currents of the nonohmic behavior of SCNCr- and ZnO-based varistors (modified Matsuoka system) is proposed in this work. The SCNCr system showed higher nonlinearity coefficients in the whole range of measured current. The electrical breakdown field (E(b)) was twice as high for the SCNCr system (5400 V/cm) than for the ZnO varistor (2600 V/cm) due to a smaller average grain size of the former (4.5 mu m) with respect to the latter (8.5 mu m). Nevertheless, we consider that another important factor responsible for the high E(b) in the SCNCr system is the great number of electrically active interfaces (85%) as determined with electrostatic force microscopy (EFM). It was also established that the SCNCr system might be produced in disks of smaller dimensions than that of commercial ZnO-based product, with a 5.0 cm(-1) minimal area-volume (A/V) ratio. The SCNCr reached the saturation current in a short time because of the high resistivity of the grains, which is five times higher than that of the grains in ZnO-based varistors.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Aproximadamente, 15% das discopatias em cães acometem a região cervical, sendo a dor o principal sinal clínico. Descreve-se a ocorrência de protrusão de disco cervical em 17 cães, agrupados segundo a raça, sexo, peso, idade, assim como a distribuição quanto à duração dos sintomas, acometimento dos discos intervertebrais (DIV), tempo de recuperação e porcentagem de sucesso, em relação à condição neurológica presente antes da cirurgia. A raça Dachshund representou 29,5% (n=5), cães sem raça definida, Poodle e Cocker Spaniel Inglês, 17,6% cada (n=9), Pinscher, 11,8% (n=2) e Dálmata, 5,9% (n=1). Destes, 58,8% eram machos (n=10) e 41,2%, fêmeas (n=7), com peso entre 2 e 29kg, e idade média igual a 5,8 anos. O quadro neurológico desses animais correspondia à dor e ataxia, com exceção de um cão Dálmata, 11 anos de idade, que apresentava tetraparesia. A duração dos sinais variou de 2 a 90 dias. Os DIV mais acometidos foram C2/3 (40%), C3/4 (25%), C4/5 (15%), C5/6 (10%) e C6/7 (10%), sendo que alguns animais apresentavam lesões múltiplas. O procedimento foi padrão para todos os animais, através da fenestração e curetagem de todos os DIV abordados pelo acesso ventral, ou seja, de C2/3 até C6/7, empregando-se para isso instrumental usado para remoção de tártaro dentário (curetas Gracey, curetas McCall, extratores de tártaro S.S.White e McCall). O tempo médio de recuperação foi de 9 a 38 dias, sendo que 100% deles recuperaram totalmente as funções neurológicas. Conclui-se que a fenestração ventral apresenta excelentes resultados no tratamento das discopatias cervicais, desde que bem selecionados os pacientes, inclusive, com respeito aos diagnósticos diferenciais.
Resumo:
Estudou-se a oviposição, desenvolvimento, fecundidade e sobrevivência de Oligonychus ilicis (McGregor) (Acari: Tetranychidae), sobre discos de folhas de cafeeiro (Coffea arabica L.) submetidos à aplicação do piretróide deltametrina. em laboratório, deltametrina não interferiu no número de ovos postos pelas fêmeas em discos tratados; no período de incubação; na viabilidade dos ovos; e na duração do ciclo biológico da fêmea. em contrapartida, o inseticida causou aumento na duração da fase pós-embrionária (larva-adulto) da fêmea em 17,4% e do macho em 17,2%, duração do ciclo biológico do macho em 0,7%, e afetou a sobrevivência de machos e fêmeas em até 63,9%. As fêmeas descendentes de progênies criadas sobre discos de folhas tratadas com deltametrina apresentaram um aumento de 31,9% na oviposição.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
A simple and inexpensive way to fabricate arrays of gold microelectrodes is proposed. Integrated circuit chips are sawed through their middle, normal to the longest axis, leading to destruction of the silicon circuit and rupture of the gold wires that interconnect it with the external terminals. Polishing the resulting rough surface converts the tips of the wires embedded in the chip halves into arrays of gold microdisks of about 25 mu m diameter. The number of active microelectrodes (MEs), of an array depends on the number of pins in the chip, n, being typically (n/2)-4. These MEs can be used individually or externally interconnected in any combination. X-ray images of the chips and micrographs of the resulting surface of the polished arrays have revealed variable distances between neighbor MEs, which are, however, larger than 10 times the radius of the disks. This feature of the MEs prevents diffusional cross-talk between electrodes. The use of these microdisk electrodes for analytical purposes exhibits sigmoidal voltammograms, and chronoamperometric experiments confirm the nonlinear i vs. t(1/2) plots, typical for processes where radial diffusion prevails. Satisfactory uniformity was observed for the response of each electrode of an array, indicating similarity of geometry and disk areas. The potentialities of these MEs were demonstrated by the determination of cadmium at ppb levels using square wave voltammetry with preconcentration. Due to the relative ease with which these MEs can be manufactured and their good performance in (chemical) analysis, wide applications in electrochemistry and electroanalysis is envisioned.
Resumo:
Objective: the purpose of this study was to evaluate the effectiveness of various surface treatments for resin-modified glass-ionomer restorative materials by determining dye uptake spectrophotometrically. Method and materials: Two hundred twenty-four specimens, 4.1 mm in diameter and 2.0 mm thick, were made of 3 materials: Vitremer, Fuji II LC, and Photac-Fil Aplicap. Specimens were divided into 15 groups. The positive and negative control specimens remained unprotected, while the experimental specimens were protected with Heliobond light-activated bonding resin, Colorama nail varnish, or surface coatings indicated by the manufacturers of the glass-ionomer materials. Finishing Gloss for Vitremer, Fuji Varnish for Fuji II LC, and Ketac Glaze for Photac-Fil. The disks were immersed in 0.05% methylene blue for 24 hours except for the negative control group, which was immersed in deionized water. After 24 hours, the disks were removed, washed, and individually placed in 1 mL of 65% nitric acid for 24 hours. The solutions were centrifuged and the spectrophotometric absorbance was determined at 606 nm. The dye uptake was expressed in micrograms of dye per milliliter, and the results were analyzed with the Kruskal-Wallis test. Results: There were no differences in dye uptake among the 3 resin-modified glass-ionomer restorative materials, however, all of them required surface protection. Conclusion: the best surface protection for the 3 evaluated materials was obtained with Heliobond light-activated bonding resin.
Resumo:
We study arithmetical and topological properties of a class of Rauzy Fractals. In particular, we give a parametrization of the boundaries of these sets and show that they are quasi-disks.
Resumo:
Gold electrodes are widely used in electrochemistry and electroanalytical chemistry. The notable performance when used in stripping analysis of many ionic species and the extraordinary affinity of thio compounds for its surface make these electrodes very suitable for many applications. This paper reports a simple and novel way to construct gold electrodes (CDtrodes) using recordable CDs as the gold source. The nanometer thickness of the gold layer of recordable disks (50-100 mm) favors the construction of band nanoelectrodes with areas as small as 10(-6) cm(2). The plane surface can be easily used for the construction of conventional-sized gold electrodes for batch or now injection analysis or even to obtain electrodes as large as 100 cm(2). The low price of commercial recordable CDs allows a one way use. The evaluation and applicability of these electrodes in the form of nanoelectrodes, in batch and associated with flow cells, are illustrated in this paper.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Introduction: Recently, a new sealer composed of Portland cement named Endo-CPM-Sealer was developed. The aim of this study was to investigate the effects of Endo-CPM-Sealer (EGEO SRL, Buenos Aires, Argentina), Sealapex (Sybron Endo, Glendora, CA), and Angelus MTA (Angelus, Londrina, Brazil) on cell viability and cytokine (interleukin [IL]-1 beta and IL-6) production by mouse fibroblasts. Methods: Millipore culture plate inserts with polyethylene tubes filled with materials were placed into 24-well cell culture plates with mouse fibroblasts. Cells cultured with only empty polyethylene tubes were used as the control. After 24 hours, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay was used to evaluate the cell viability. For cytokine assay, mouse fibroblasts were incubated in 24-well flat-bottom plates with set material disks at the bottom. Cells cultured without the material disks served as the negative control. After 24 hours of incubation, culture media were collected for cytokine evaluation by using an enzyme-linked immunosorbent assay. The data were statistically analyzed by analysis of variance and Bonferroni correction. Results: Endo-CPM-Sealer, Sealapex, and Angelus MTA did not inhibit the cell viability. All materials induced IL-6 releasing, but the amount was not statistically significant compared with the control group. Angelus MTA induced IL-1 beta releasing significantly more than the control. Conclusions: All materials were not considered cytotoxic in fibroblast culture. (J Endod 2009;35:1577-1579)
Resumo:
The rubber tree red false spider mite, Tenuipalpus heveae Baker, is an important pest of Hevea brasiliensis (Willd. ex. Adr. de Juss.) Muell. Arg. The phytoseiid mite Euseius citrifolius Dennmark & Muma has frequently been recorded on rubber tree crops. The objective of this work was to determine the predatory activity of E. citrifolius on the different life stages (egg, larva, nymph and adult) of T. heveae. The experiments were carried out in Petri dishes (9-cm diameter) containing a layer of wet cotton inside, onto which a disk of rubber tree leaf (2.5-cm diameter) was laid. The disks were taken from naturally infested leaves. Twenty specimens in the life stage that was to be tested were left on the disk and the others were eliminated; a predator life stage (larva, nymph or female) was obtained from a laboratory stock colony and put into each dish. For each tested life stage of E. citrifolius, 4 treatments (T. heveae life stages) and 20 replications were considered in a randomized block design. The observations were made after 24 hours for larvae and nymphs of the predator, and after 24, 48 and 72 hours for the females. E. citrifolius larvae and nymphs had a higher preference for T. heveae larvae followed by nymphs, eggs and adults. Within 72 hours, each predator female consumed 15.0 larvae, 14.5 nymphs, 7.4 adults or 2.2 eggs of T. heveae. It is concluded that E. citrifolius can feed on red false spider mites, the larva and nymph being the preferred stages.