901 resultados para discontinuous frying
Resumo:
The innately highly efficient light-powered separation of charge that underpins natural photosynthesis can be exploited for applications in photoelectrochemistry by coupling nanoscale protein photoreaction centers to man-made electrodes. Planar photoelectrochemical cells employing purple bacterial reaction centers have been constructed that produce a direct current under continuous illumination and an alternating current in response to discontinuous illumination. The present work explored the basis of the open-circuit voltage (V(OC)) produced by such cells with reaction center/antenna (RC-LH1) proteins as the photovoltaic component. It was established that an up to ~30-fold increase in V(OC) could be achieved by simple manipulation of the electrolyte connecting the protein to the counter electrode, with an approximately linear relationship being observed between the vacuum potential of the electrolyte and the resulting V(OC). We conclude that the V(OC) of such a cell is dependent on the potential difference between the electrolyte and the photo-oxidized bacteriochlorophylls in the reaction center. The steady-state short-circuit current (J(SC)) obtained under continuous illumination also varied with different electrolytes by a factor of ~6-fold. The findings demonstrate a simple way to boost the voltage output of such protein-based cells into the hundreds of millivolts range typical of dye-sensitized and polymer-blend solar cells, while maintaining or improving the J(SC). Possible strategies for further increasing the V(OC) of such protein-based photoelectrochemical cells through protein engineering are discussed.
Resumo:
Over the last 50 years, the city of Venice, Italy, has observed a significant increase in the frequency of flooding. Numerous engineering solutions have been proposed, including the use of movable gates located at the three lagoon inlets. A key element in the prediction of performance is the estimation of settlements of the foundation system of the gates. The soils of Venice Lagoon are characterized by very erratic depositional patterns of clayey silts, resulting in an extremely heterogeneous stratigraphy with discontinuous layering. The soils are also characterized by varying contents of coarse and fine-grained particles. In contrast, the mineralogical composition of these deposits is quite uniform, which allows us to separate the influence of mineralogy from that of grain size distribution. A comprehensive geotechnical testing program was performed to assess the one-dimensional compression of Venice soils and examine the factors affecting the response in the transition from one material type to another. The compressibility of these natural silty clayey soils can be described by a single set of constitutive laws incorporating the relative fraction of granular to cohesive material. © 2007 ASCE.
Resumo:
This paper studies the dynamical response of a rotary drilling system with a drag bit, using a lumped parameter model that takes into consideration the axial and torsional vibration modes of the bit. These vibrations are coupled through a bit-rock interaction law. At the bit-rock interface, the cutting process introduces a state-dependent delay, while the frictional process is responsible for discontinuous right-hand sides in the equations governing the motion of the bit. This complex system is characterized by a fast axial dynamics compared to the slow torsional dynamics. A dimensionless formulation exhibits a large parameter in the axial equation, enabling a two-time-scales analysis that uses a combination of averaging methods and a singular perturbation approach. An approximate model of the decoupled axial dynamics permits us to derive a pseudoanalytical expression of the solution of the axial equation. Its averaged behavior influences the slow torsional dynamics by generating an apparent velocity weakening friction law that has been proposed empirically in earlier work. The analytical expression of the solution of the axial dynamics is used to derive an approximate analytical expression of the velocity weakening friction law related to the physical parameters of the system. This expression can be used to provide recommendations on the operating parameters and the drillstring or the bit design in order to reduce the amplitude of the torsional vibrations. Moreover, it is an appropriate candidate model to replace empirical friction laws encountered in torsional models used for control. © 2009 Society for Industrial and Applied Mathematics.
Resumo:
The aerodynamic design of turbomachinery presents the design optimisation community with a number of exquisite challenges. Chief among these are the size of the design space and the extent of discontinuity therein. This discontinuity can serve to limit the full exploitation of high-fidelity computational fluid dynamics (CFD): such codes require detailed geometric information often available only sometime after the basic configuration of the machine has been set by other means. The premise of this paper is that it should be possible to produce higher performing designs in less time by exploiting multi-fidelity techniques to effectively harness CFD earlier in the design process, specifically by facilitating its participation in configuration selection. The adopted strategy of local multi-fidelity correction, generated on demand, combined with a global search algorithm via an adaptive trust region is first tested on a modest, smooth external aerodynamic problem. Speed-up of an order of magnitude is demonstrated, comparable to established techniques applied to smooth problems. A number of enhancements aimed principally at effectively evaluating a wide range of configurations quickly is then applied to the basic strategy, and the emerging technique is tested on a generic aeroengine core compression system. A similar order of magnitude speed-up is achieved on this relatively large and highly discontinuous problem. A five-fold increase in the number of configurations assessed with CFD is observed. As the technique places constraints neither on the underlying physical modelling of the constituent analysis codes nor on first-order agreement between those codes, it has potential applicability to a range of multidisciplinary design challenges. © 2012 by Jerome Jarrett and Tiziano Ghisu.
Resumo:
The construction of protein-based photoelectrochemical cells that produce a variety of alternating currents in response to discontinuous illumination is reported. The photovoltaic component is a protein complex from the purple photosynthetic bacterium Rhodobacter sphaeroides which catalyses photochemical charge separation with a high quantum yield. Photoelectrochemical cells formed from this protein, a mobile redox mediator and a counter electrode formed from cobalt disilicide, titanium nitride, platinum, or multi-walled carbon nanotubes (MWCNT) generate a direct current during continuous illumination and an alternating current with different characteristics during discontinuous illumination. In particular, the use of superhydrophobic MWCNT as the back electrode results in a near symmetrical forward and reverse current upon light on and light off, respectively. The symmetry of the AC output of these cells is correlated with the wettability of the counter electrode. Potential applications of a hybrid biological/synthetic solar cell capable of generating an approximately symmetrical alternating current are discussed. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Resumo:
Iron deficiency can induce cyanobacteria to synthesize siderophore receptor proteins on the outer membrane to enhance the uptake of iron. In this study, an outer membrane of high purity was prepared from Anabaena sp. PCC 7120 based on aqueous polymer two-phase partitioning and discontinuous sucrose density ultra-centrifugation, and the induction of outer membrane proteins by iron deficiency was investigated using 2-D gel electrophoresis. At least. five outer membrane proteins were newly synthesized or significantly up-regulated in cells transferred to iron-deficient conditions, which were all identified to be siderophore receptor proteins according to MALDI-TOF-MS analyses. Bacterial luciferase reporter genes luxAB were employed to monitor the transcription of the encoding genes. The genes were induced by iron deficiency at the transcriptional level in different responsive modes. Luciferase activity expressed from an iron-regulated promoter may be used as a bioreporter for utilizable iron in natural water samples. (C) 2009 National Natural Science Foundation of China and Chinese Academy of Sciences. Published by Elsevier Limited and Science in China Press. All rights reserved.
Resumo:
To discover how a lake converts from a turbid state to clean state, and what drives this process, we constructed controlled enclosure ecosystems and used the ecological remediation method to force ecosystems to convert from the turbid state to the clean state. Our results show that the driving forces include temperature., macrophyte, silver carp and mussel, which form a combined force to drive the controlled ecosystem to switch. There is a threshold existing in treated enclosure ecosystem during the conversion from turbid to clean state. When TP <0.09 mg.L-1, Chl-a <0.036 mg.L-1, transparency >62 cm, TN <2.15 mg.L-1, CODMn <13.7 mg.L-1, tubidity <10, and the number of algal cells <10(6) cells.L-1, the treated ecosystem changes sharply from turbid to clean state. The conversion process can be divided into three phases: turbid state, clean-turbid transitional state as well as clean state, and described with the power function Y = a*X-b (where Y is water parameter, X is time, a and b are constants), which indicates that the shift in the enclosure ecosystem from turbid to clean state is discontinuous.
Resumo:
Most traditional satellite constellation design methods are associated with a simple zonal or global, continuous or discontinuous coverage connected with a visibility of points on the Earth's surface. A new geometric approach for more complex coverage of a geographic region is proposed. Full and partial coverage of regions is considered. It implies that, at any time, the region is completely or partially within the instantaneous access area of a satellite of the constellation. The key idea of the method is a two-dimensional space application for maps of the satellite constellation and coverage requirements. The space dimensions are right ascension of ascending node and argument of latitude. Visibility requirements of each region can be presented as a polygon and satellite constellation as a uniform moving grid. At any time, at least one grid vertex must belong to the polygon. The optimal configuration of the satellite constellation corresponds to the maximum sparse grid. The method is suitable for continuous and discontinuous coverage. In the last case, a vertex belonging to the polygon should be examined with a revisit time. Examples of continuous coverage for a space communication network and of the United States are considered. Examples of discontinuous coverage are also presented.
Resumo:
This paper discusses a rigorous treatment of the refractive scintillation of pulsar PSR B0833-45 caused by a two-component interstellar scattering medium. It is assumed that the interstellar scattering medium is composed of a thin screen ISM and an extended interstellar medium. We consider that the scattering of the thin screen concentrates in a thin layer presented by a delta function distribution and that the scattering density of the extended irregular medium satisfies the Gaussian distribution. We investigate and develop equations for the flux density structure function corresponding to this two-component ISM geometry in the scattering density distribution and compare our result with that of the Vela pulsar observations. We conclude that the refractive scintillation caused by this two-component ISM scattering gives a more satisfactory explanation for the observed flux density variation of the Vela pulsar than does the single extended medium model. The level of refractive scintillation is strongly sensitive to the distribution of scattering material along the line of sight. The logarithmic slope of the structure function is sensitive to thin screen location and is relatively insensitive to the scattering strength of the thin screen medium. Therefore, the proposed model can be applied to interpret the structure function of flux density observed in pulsar PSR B0833-45. The result suggests that the medium consists of a discontinuous distribution of plasma turbulence embedded in the Vela supernova remnant. Thus our work provides some insight into the distribution of the scattering along the line of sight to the Vela pulsar.
Resumo:
The deep centers in AlGaAs/GaAs graded index-separate confinement heterostructure single quantum well (GRIN-SCHSQW) laser structures grown by MBE and MOCVD have been investigated using deep level transient spectroscopy (DLTS) technique, The majority and minority carrier DLTS spectra show that the deep (hole and electron) traps (Hi and E3), having large capture cross sections and concentrations, are observed in the graded n-AlxGa1-xAs layer of laser structures in addition to the well-known DX centers. For laser structures grown by MBE, the deep hole trap H1 and the deep electron trap E3 may be spatially localized in the interface regions of discontinuous variation Al mole fraction of the n-AlxGa1-xAs layer with x = 0.20-0.43. For laser structures grown by MOCVD, the deep electron trap E3 may be spatially localized in the n-AlxGa1-xAs layer with x = 0.18-0.30, and the DX center may be spatially localized in the interface regions of discontinuous variation Al mole fraction of the AlxGa1-xAs layer with x = 0.22-0.30.
Resumo:
A transfer matrix approach is presented for the study of electron conduction in an arbitrarily shaped cavity structure embedded in a quantum wire. Using the boundary conditions for wave functions, the transfer matrix at an interface with a discontinuous potential boundary is obtained for the first time. The total transfer matrix is calculated by multiplication of the transfer matrix for each segment of the structure as well as numerical integration of coupled second-order differential equations. The proposed method is applied to the evaluation of the conductance and the electron probability density in several typical cavity structures. The effect of the geometrical features on the electron transmission is discussed in detail. In the numerical calculations, the method is found to be more efficient than most of the other methods in the literature and the results are found to be in excellent agreement with those obtained by the recursive Green's function method.
Resumo:
The 3-section SG-DBR tunable laser is fabricated using an ion implantation quantum-well intermixing process. The over 30nm discontinuous tuning range is achieved with the SMRS greater than 30dB.
Resumo:
An arch-shaped beam with different configurations under electrostatic loading experiences either the direct pull-in instability or the snap-through first and then the pull-in instability. When the pull-in instability occurs, the system collides with the electrode and adheres to it, which usually causes the system failure. When the snap-through instability occurs, the system experiences a discontinuous displacement to flip over without colliding with the electrode. The snap-through instability is an ideal actuation mechanism because of the following reasons: (1) after snap-through the system regains the stability and capability of withstanding further loading; (2) the system flips back when the loading is reduced, i.e. the system can be used repetitively; and (3) when approaching snap-through instability the system effective stiffness reduces toward zero, which leads to a fast flipping-over response. To differentiate these two types of instability responses for an arch-shaped beam is vital for the actuator design. For an arch-shaped beam under electrostatic loading, the nonlinear terms of the mid-plane stretching and the electrostatic loading make the analytical solution extremely difficult if not impossible and the related numerical solution is rather complex. Using the one mode expansion approximation and the truncation of the higher-order terms of the Taylor series, we present an analytical solution here. However, the one mode approximation and the truncation error of the Taylor series can cause serious error in the solution. Therefore, an error-compensating mechanism is also proposed. The analytical results are compared with both the experimental data and the numerical multi-mode analysis. The analytical method presented here offers a simple yet efficient solution approach by retaining good accuracy to analyze the instability of an arch-shaped beam under electrostatic loading.
Resumo:
沙蜥属(Phrynocephalus)的卵胎生类群主要分布在我国青藏高原,包括南疆沙蜥(P. forsythii)、西藏沙蜥(P. theobaldi)、红尾沙蜥(P. erythrurus)、贵德沙蜥(P. putjatia)和青海沙蜥(P. vlangalii)。其卵胎生生殖方式适应了高寒生境,与青藏高原隆升有关。纵观前人的研究,上述几种卵胎生沙蜥的分类、系统发育关系以及生物地理都还存在疑问。本文研究了分布在若尔盖湿地的青海沙蜥红原亚种(P. v hongyuanensis)以及分布在黄河上游其它地区青海沙蜥种组的地理分布格局,并探讨了其形成机制。 青海沙蜥在黄河上游主要分布于若尔盖湿地以及青海湖周边地区。若尔盖湿地青海沙蜥红原亚种的生境由于沼泽的形成被切割成不连续的斑块,通过遗传分析可以推测这种特殊生境对它们遗传结构的影响。其次,贵德沙蜥、青海沙蜥的青海湖周边各居群以及若尔盖湿地居群之间的系统地理格局还未见报道。因此本文以居群为单位,将它们作为一个复合体,通过系统地理研究,可以了解其种群遗传结构,据此分析相关的地质历史事件对其分布的影响。主要结果如下: 1. 若尔盖湿地青海沙蜥红原亚种的种群遗传结构: 共研究了三个地理单元(红原(HY)、辖曼(XM)、玛曲(MQ))的7个采集点的72个个体。所有ND4-tRNALeu序列比对得到785 bp的片断,定义了9种单倍型。结果显示总的核苷酸多样性较低,单倍型多样性较高。分子变异分析(AMOVA)显示3个单元间差异显著(P<0.01),遗传变异主要存在于地理单元间,占62.61%。除MQ单元,XM各居群与HY居群混杂在一起,单倍型网络图没有显示出单倍型和地理位置的对应关系。XM单元单倍型的不配对分布(Mismatch distribution)为明显左移的单峰,且Fu’s Fs test为负值,表明XM单元可能经历了近期种群扩张,有足够的时间积累单倍型的多态性,还不足以大幅提高核苷酸多样性,这是其单倍型多样性较高和核苷酸多样性较低的原因。MQ单元遗传多样性低而与其他单元显著分化,推测这与3万年前黄河在若尔盖玛曲之间贯通有关。近期沼泽的形成对XMb居群的隔离时间短,使得其遗传多样性低但还不足以形成大的遗传差异。无论黄河的贯通还是沼泽的形成其隔离形成的时间都不长,其作用改变了单倍型出现的频率,也出现了一些特有单倍型,但共享单倍型还广泛存在,还不足以使得不同居群之间形成较大的遗传距离。 2. 黄河上游青海沙蜥种组的分布格局与地史过程的关系: 黄河上游青海沙蜥种组包括贵德沙蜥、青海沙蜥指名亚种的青海湖周边各居群、青海沙蜥红原亚种若尔盖湿地居群、以及青海湖以西的部分居群(序列由Genbank下载获得),总计22个居群189个样品。所有ND4-tRNALeu序列比对得到703个位点,定义了39种单倍型。以南疆沙蜥为外群构建的贝叶斯树以及MP法构建的无根树,都分为A、B两大组。其中A包括若尔盖湿地居群以及玛多居群(A1)、青海湖以西的居群和兴海居群(A2)、西藏沙蜥;B包括青海湖以南的居群和天祝居群(B1)、青海湖以东北的居群(B2)。单倍型网络图分别对应了系统发育树上的各支。按照系统发育结果分组进行分子变异分析,得到组间变异占88.63%,各组间差异显著(P=0.000)。种群遗传结构分析得到,A1和B2可能经历了近期的种群扩张,前者扩张时间约为0.105-0.189 Ma B.P.(million years before present),后者为0.057-0.102 Ma B.P.,可能与末次间冰期的气候变暖有关。A2和B1对应的两个地理单元都具有较强的种群遗传结构,较为稳定。 青海沙蜥种组A、B两大支之间遗传距离大,分化明显,分化大约发生在4.29-2.38 Ma B.P.,推测青藏运动的A幕运动后复杂的地形变化可能是它们产生分化的原因。B1和B2分化大约发生在1.73-0.96 Ma B.P.,这与湟水流域构造运动发生的时间相符。在早、中更新世时期,B1支内部各居群可能有交流,中更新世末共和盆地出现的抬升以及河流溯源改道等事件可能是引起这支内部多个单倍型丢失的原因。A1、A2支的分化可能与倒数第三次冰期降临之后气候变冷、阿尼玛卿山的大冰帽有关。 The viviparous group of genus Phrynocephalus is mainly distributed in the Qinghai –Tibetan Plateau, including P. forsythii、P. theobaldi、P. erythrurus、P. putjatia and P. vlangalii. These species are adapted well to the cold clime there, and the origin of this group was the result of a vicariance event associated with the uplifting of the Qinghai -Tibetan Plateau. Although many works have been done, there are still several questions about classification、phylogenetic relationships and the biogeography of this group. The phylogeographic pattern of the P. vlangalii complex on the upper reaches of the Yellow River and the P. v. hongyuanensis in Zoige Wetland were studied in this thesis. On the upper reaches of the Yellow River, P. vlangalii complex are distributed in Zoige Wetland and the southeast and northeast region of Kuku-noor Lake. Because of the forming of the wetland in Zoige, the habitats for sand lizards are divided into many discontinuous ones, and it is necessary to analyze genetic structure in these unique habitats. The phylogeographic patter among P. putjatia、populations of P. vlangalii in the southeast region of Kuku-noor Lake and populations of P. vlangalii in Zoige Wetland hasn’t been studied yet, and the complicated geological events of the Plateau may play an important role in the populations’ diversity and species forming there. So these populations were gathered as a complex, and phylogeographic analysis were used to clarify these doubts. According to the two topics above, this thesis has two parts of results as follows: 1. Three geographic units of P. vlangalii hongyuanensis in Zoige Wetland were defined, and they were Xiaman (XM)、Hongyuan (HY) and Maqu (MQ). 785bp fragments of the mtDNA ND4-tRNAleu were determined from 72 samples and nine haplotypes were identified. As a whole, the nucleotide diversity was low,but the haplotype diversity was high. Analysis of molecular variance (AMOVA) showed that the three units were distinctly different(P<0.01),and 62.61% of the total genetic diversity was attributable to variation among units. There were 3 haplotypes shared among XM and HY,and no geographic clustering was observed except MQ from the TCS network. The results from the mismatch distribution analysis and Fu’s Fs test implied that there might be a recent population expansion in the XM unit, and this may be the reason why XM had a high haplotype diversity but a low nucleotide diversity. We estimate that the MQ and XMb have lower diversities because of some very recent geographic events, such as the formation of the Yellow river’s upriver and the Zoige Wetland. Although they are distinctly different, not enough time has passed for them to have diverged a great genetic distance. 2. 189 samples in 22 populations of P. vlangalii complex were collected, including P. putjatia、populations of P. vlangalii in the southeast and northeast region of Kuku-noor Lake、 populations of P. vlangalii in Zoige Wetland and the data from Genbank. 703bp ND4-tRNALeu sequences identified 39 haplotypes. P. forsythii was selected as outgroup, and both the Bayesian tree and the MP unrooted tree were divided into two groups(A、B). A included populations in Zoige Wetland and Xinghai(A1)、populations in the west of Kuku-noor Lake(A2)、P. theobaldi, and B included populations in the southeast of Kuku-noor Lake and Tianzhu(B1)、populations in the northeast of Kuku-noor Lake(B2). The haplotype network agreed with these groups. AMOVA showed that these five groups were distinctly different(P<0.01), and 88.63% of the total genetic diversity was attributable to variation among groups. There might be recent population expansion in A1 and A2, which corresponded to the dry climate of the last interglacial period. The expansion times were 0.189-0.105 Ma B.P. and 0.102-0.057 Ma B.P., respectively. A2 and B1 had strong genetic structure. The large genetic distance between A and B showed that they had been separated from each other for a long time(about 4.29-2.38 Ma B.P.), and it corresponded to the A phase of Qingzang Movement. The diversity between B1 and B2 at 1.73-0.96 Ma B.P. may be caused by the geological event in Huangshui valley. In early Pleistocene, populations in B1 may have gene flow because of geographic linkage, and later the uplift of the Plateau and the change of river route there made a few haplotypes lost. A1 and A2 were divided into two parts by A’nyemaqen Mountains at 0.66-0.37 Ma B.P., which maybe corresponded to glaciations at about 0.7 Ma B.P.
Resumo:
A central challenge to the semiclassical description of quantum mechanics is the quantum phenomenon of "deep" tunneling. Here we show that real time classical trajectories suffice to account correctly even for deep quantum tunneling, using a recently formulated semiclassical initial value representation series of the quantum propagator and a prefactor free semiclassical propagator. Deep quantum tunneling is effected through what we term as coherent classical paths which are composed of one or more classical trajectories that lead from reactant to product but are discontinuous along the way. The end and initial phase space points of consecutive classical trajectories contributing to the coherent path are close to each other in the sense that the distance between them is weighted by a coherent state overlap matrix element. Results are presented for thermal and energy dependent tunneling through a symmetric Eckart barrier.