937 resultados para cure compassionevoli


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The influence of an organically modified clay on the curing behavior of three epoxy systems widely used in the aerospace industry and of different structures and functionalities, was studied. Diglycidyl ether of bisphenol A (DGEBA), triglycidyl p-amino phenol (TGAP) and tetraglycidyl diamino diphenylmethane (TGDDM) were mixed with an octadecyl ammonium ion modified organoclay and cured with diethyltoluene diamine (DETDA). The techniques of dynamic mechanical thermal analysis (DMTA), chemorheology and differential scanning calorimetry (DSC) were applied to investigate gelation and vitrification behavior, as well as catalytic effects of the clay on resin cure. While the formation of layered silicate nanocomposite based on the bifunctional DGEBA resin has been previously investigated to some extent, this paper represents the first detailed study of the cure behavior of different high performance, epoxy nanocomposite systems.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objectives. This study examined the depth of cure and surface microhardness of Filtek Z250 composite resin (3M-Espe) (shades B1, A3, and C4) when cured with three commercially available tight emitting diode (LED) curing lights [E-light (GC), Elipar Freelight (3M-ESPE), 475H (RF Lab Systems)], compared with a high intensity quartz tungsten halogen (HQTH) light (Kerr Demetron Optilux 501) and a conventional quartz tungsten halogen (QTH) lamp (Sirona S1 dental unit). Methods. The effects of light source and resin shade were evaluated as independent variables. Depth of cure after 40 s of exposure was determined using the ISO 4049:2000 method, and Vickers hardness determined at 1.0 mm intervals. Results. HQTH and QTH lamps gave the greatest depth of cure. The three LED lights showed similar performances across all parameters, and each unit exceeded the ISO standard for depth of cure except GC ELight for shade B1. In terms of shade, LED lights gave greater curing depths with A3 shade, while QTH and HQTH tights gave greater curing depths with C4 shade. Hardness at the resin surface was not significantly different between LED and conventional curing lights, however, below the surface, hardness reduced more rapidly for the LED lights, especially at depths beyond 3 mm. Significance. Since the performance of the three LED lights meets the ISO standard for depth of cure, these systems appear suitable for routine clinical application for resin curing. (C) 2003 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Thermosetting blends of an aliphatic epoxy resin and a hydroxyl-functionalized hyperbranched polymer (HBP), aliphatic hyperbranched polyester Boltorn H40, were prepared using 4,4'-diaminodiphenylmethane (DDM) as the curing agent. The phase behavior and morphology of the DDM-cured epoxy/HBP blends with HBP content up to 40 wt% were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The cured epoxy/HBP blends are immiscible and exhibit two separate glass transitions, as revealed by DMA. The SEM observation showed that there exist two phases in the cured blends, which is an epoxy-rich phase and an HBP-rich phase, which is responsible for the two separate glass transitions. The phase morphology was observed to be dependent on the blend composition. For the blends with HBP content up to 10 wt%, discrete HBP domains are dispersed in the continuous cured epoxy matrix, whereas the cured blend with 40 wt% HBP exhibits a combined morphology of connected globules and bicominuous phase structure. Porous epoxy thermosets with continuous open structures on the order of 100-300 nm were formed after the HBP-rich phase was extracted with solvent from the cured blend with 40 wt% HBP. The DSC study showed that the curing rate is not obviously affected in the epoxy/HBP blends with HBP content up to 40 wt %. The activation energy values obtained are not remarkably changed in the blends; the addition of HBP to epoxy resin thus does not change the mechanism of cure reaction of epoxy resin with DDM. (c) 2006 Wiley Periodicals, Inc.

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Natural rubber latex, an aqueous colloidal dispersion of polyisoprene is widely used in production of gloves, catherers, rubber bands etc. The natural rubber latex content present in products such as gloves causes allergic problems. Of the different types of allergies reported, latex is known to produce Type I and Type IV allergies. Type I is called immediate hypersensitivity and type IV is called delayed hypersensitivity. It has been reported that some of the proteins present in the latex are mainly responsible for the allergic reactions type I. Significant reduction in the allergic response (type I) of natural rubber latex can be achieved by the reduction in its protein content, however out of the total proteins present in the latex or latex film only a fraction is extractable. The major techniques employed to reduce protein content of latex include leaching, autoclaving, chlorination, use of proteolytic enzymes and use of non ionic surfactants. Sulphur vulcanization of dipped products is responsible for Type IV allergy. N-nitrosamine, a carcinogenic substance is produced as a result of sulphur vulcanization. Radiation vulcanization can be used as an alternative for sulphur vulcanization. The current research deals with techniques to reduce the allergy associated with latex products. To reduce the type I allergy, low protein latex is developed using polyethylene glycol, a non- ionic surfactant. The present study employs radiation vulcanization to eliminate type IV allergy. The effect of different cure systems and fillers on the properties of low protein latex is also investigated as a part of the study.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A case for directing attention away from concussion management and towards the prevention of concussions in sport.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nel presente articolo verrà presa in considerazione una forma di abuso che ha colto l’attenzione degli operatori da non molti anni: la patologia delle cure. Saranno trattate le tre forme di patologia nella somministrazione delle cure che la costituiscono, soffermandoci principalmente sull’incuria e su una forma di ipercura quale la Sindrome di Munchausen per procura, sindrome rara e difficile da riconoscere. Assistiamo ad un paradosso, da un lato l’incuria: bambini abbandonati, denutriti, trascurati fisicamente e psicologicamente; e il suo contrario l’eccessiva cura, che porta in casi estremi ad “un’eccessiva medicalizzazione”. Quantificare il fenomeno del maltrattamento in ogni sua forma è difficile e lo è ancora di più quantificare quello di una forma di abuso piuttosto recente, ma riconoscere il fenomeno è il primo passo per preparare il terreno alla prevenzione.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

London, Wellcome Library, MS 411 is a codex in one volume which dates from the late fifteenth century. It houses a collection of practical treatises and tracts in English and Latin, in verse as well as in prose, on different topics including prognostications, nativities, medical astrology, reproduction, toxicology, bloodletting, etc. In this paper, the Middle English anonymous treatise on venomous bites, written in prose and held in folios 56r to 61r, is taken into consideration. The objective is twofold: on the one hand, to examine the contents, transmission and sources of the text and, on the other, to describe it from a physical standpoint. Investigation on those aspects of the treatise contained in Wellcome MS 411 can shed some light on the function and diffusion of the text, and may also prove significant for a better understanding of it.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

L’insorgere della pandemia da COVID-19 ha comportato una pesante riorganizzazione delle strutture ospedaliere e lo stesso sistema delle cure oncologiche è stato ripensato cercando di garantire, da un lato, la sicurezza dei pazienti e del personale sanitario e, dall’altro, la continuità delle cure. Il progetto analizza l’impatto di questa riorganizzazione sulle traiettorie di malattia dei pazienti oncologici e sul lavoro di cura dei diversi attori coinvolti nella definizione di queste traiettorie. La ricerca, focalizzata sul contesto ospedaliero emiliano-romagnolo, si è svolta tramite la realizzazione di interviste qualitative a personale sanitario ospedaliero, associazioni di volontariato, pazienti e caregiver. La gestione del rischio Covid ha comportato un consistente impegno in termini di safety work da parte del personale sanitario. Inoltre, le limitazioni degli accessi agli ambienti ospedalieri, imposte come misure di sicurezza, hanno comportato l’esclusione di familiari e associazioni di volontariato dagli ospedali e, di conseguenza, una maggiore solitudine del paziente in tutte le fasi del percorso di cura. L’assistenza fornita da queste figure ricomprende una componente di “lavoro invisibile” che la situazione pandemica ha permesso di far emergere. Infatti, i familiari supportano indirettamente e informalmente il lavoro del personale sanitario all’interno dello stesso ambiente ospedaliero. I professionisti intervistati hanno riconosciuto il venir meno di questo supporto. La risposta del personale ospedaliero, e infermieristico in particolare, si è articolata in due direzioni al fine di sopperire a queste mancanze: da un lato, incrementando la componente di sentimental work, e quindi di supporto emotivo ai pazienti; dall’altro, attraverso buone pratiche orientate a rispondere ai bisogni dei pazienti, intesi non solo in senso biomedico, ma anche psicologico e relazionale. Possiamo quindi concludere che, sotto certi aspetti, la pandemia è stata contrastata con una maggiore umanizzazione delle cure oncologiche e una maggiore attenzione ai bisogni dei pazienti intesi nella loro interezza e complessità.