Failure rates modelling for heterogenous populations

Mixture of distributions, decreasing failure rate, increasing failure rate, proportional hazards model, accelerated life model, asymptotic behavior of mixture failure rate

Modelling and analysis of a production plant for low density polyethylene

Dynamic model, tubular reactor, polyethylene, LDPE, discretization, simulation, sensitivity analysis, nonlinear analysis

Precipitation of barium sulphate nanoparticles in microemulsion : experiments and modelling

Nanopartikel, BaSO4, Mikroemulsion, Fällung, Modellierung

Modelling the influence of microstructure on elastic properties and tensile damage behaviour of Mo-base silicide alloys

Mo-Si-B alloys, Real microstructures, Voronoi structures, Microstructural characterization, Modelling and finite element simulations, Effective material properties, Damage and Crack growth, tensile strength, fracture toughness

Simulations for modelling of population balance equations of particulate processes using the discrete particle model (DPM)

Magdeburg, Univ., Fak. für Mathematik, Diss., 2009

Elastic modelling of deformation twinning on the microscale

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2009

Context modelling for IT security in selected application scenarios

Magdeburg, Univ., Fak. für Informatik, Diss., 2015

Recent brazilian experience on farmer reaction and crop response to fertilizer use

(1) In the period 1965/77 fertilizer consumption in Brazil increased nearly fifteen foild from circa 200,000 tons of N + P2O5 + K2O to 3 million tons. During the fifteen years extending from 1950 to 1964 usage of the primary macronutrients was raised by a factor of 2 only. (2) Several explanations are given for the remarkable increase, namely: an experimental background which supplied data for recommendations of rates, time and type of application; a convenient governmental policy for minimum prices and rural credit; capacity of the industry to meet the demand of the fertilizer market; an adequate mechanism for the diffusion of the practice of fertilizer use to the farmer. (3) The extension work, which has caused a permanent change in the aptitude towards fertilization, was carried out in the traditional way by salesmen supported by a technical staff, as well as by agronomists of the official services. (4) Two new programs were started and conducted in a rather short time, both putting emphasis on the relatively new technology of fertilizer use. (5) The first program, conducted in the Southern part of the country, extended lab and green house work supplemented by a few field trials to small land owners - the so called "operação tatú" (operation armadillo). (6) The seconde program, covering a larger problem area in the Northeast and in Central Brazil, began directly in field as thousands of demonstrations and simple experiments with the participation of local people whose involvement was essential for the success of the initiative; in this case the official extension services, both foreign and national sources of funds, and universities did participate under the leadership of the Brazilian Association for the Diffusion of Fertilizers (ANDA). (7) It is felt that the Brazilian experience gained thereof could be useful to other countries under similar conditions.

Conceptual Foundations of Modelling of Innovative Production Projects

At the moment there is a lack of methodological approaches to formalization of management of innovative projects relating to production systems, as well as to adaptation and practical use of the existing approaches. This article is about one potential approach to the management of innovative projects, which makes the building of innovative process models possible based on objective approach. It outlines the frameworks for the building of innovative project models, and describes the method of transition from conceptual modelling to innovative project management. In this case, the model alone and together with parameters used for evaluation of the project may be unique and depends on the special features of the project, preferences of decision-making person, and production and economic system in which it is to be implemented. Unlike existing approaches, this concept does not place any restrictions on types of models and makes it possible to take into account the specificities of economic and production systems. Principles embodied in the model allow its usage as a basis for simulation model to be used in one of specialized simulation systems, as well as for information system providing information support of decision-making process in production and economic systems both newly developed by the company (enterprise) and designed on the basis of available information systems that interact through the exchange of data. In addition, this article shows that the development of conceptual foundations of innovative project management in the economic and production systems is inseparable from the development of the theory of industrial control systems, and their comprehensive study may be reduced to a set of elements represented as certain algorithms, models and evaluations. Thus, the study of innovative process may be conducted in both directions: from general to particular, and vice versa.

Effects of population density on cauliflower crop (Brassica oleracea L. var. botrytis)

An experiment was carried out to study the effects of the following population densities cauliflowers (plants per ha): 20,833 (0.60 m x 0.80 m), 25,641 (0.60 m x 0.65 m), ....37.037 (0.60 m x 0.45 m) , 55.555 (.0.60 m x 0.30 m), and 111,111 (0,60 m x 0,15 m) ; variety Snow ball. It was concluded that the effects of plant population density are greater on curd quality (weight and size) than on production per ha. The best plant population density to produce cauliflowers curd for Brazil market is from 20,000 to 25,000 plants/ha while for mini-curd is above 55,000 plants/ha.

Doses and methods of distribution of potassium chloride on soybean crop (Glycine max (L.) Merrill) in a red latosol, affecting soil salinity, grain production and chemical composition of leaves

The present work deal t wi th an experiment under field conditions and a laboratory test of soil incubation the objectives were as follows: a. to study effects on soybean grain product ion and leaf composition of increasing doses of potassium chloride applied into the soil through two methods of distribution; b. to observe chemical modifications in the soils incubated with increasing doses of potassium chloride; and, c. to correlate field effects with chemical alterations observed in the incubation test, The field experiment was carried out in a Red Latosol (Haplustox) with soybean cultivar UFV - 1. Potassium chloride was distributed through two methods: banded (5 cm below and 5 cm aside of the seed line) and broadcasted and plowed-down. Doses used were: 0; 50; 100 and 200 kg/ha of K2O. Foliar samples were taken at flowering stage. Incubation test were made in plastic bags with 2 kg of air dried fine soil, taken from the arable layer of the field experiment, with the following doses of KC1 p,a. : 0; 50; 100; 200; 400; 800; 1,600; 3.200; 6,400 and 12,800 kg/ha of K(2)0. In the conditions observed during the present work, results allowed the following conclusions: A response by soybean grain production for doses of potassium chloride, applied in both ways, banded or broadcasted, was not observed. Leaf analysis did not show treatment influence over the leaf contents for N, P, K, Ca, Mg, and CI, Potassium chloride salinity effects in both methods of distribution for all the tested closes were not observed.

Effects of planting density on flower production in carnation crop

The influence of density of planting on flower production of carnation plants grown in vinil houses, was studied. Planting densities of 233,333; 175,000 and 116,667 plants per hectare were obtained by using planting spacings of 0.20 m between rows and 0.15 m, 0,20 m and 0.30 m between plants. Data were taken on total number of flowers per plant and per hectare. As far as planting densities are concerned, there was an increase of total flower production per hectare and a decrease of slower production per plant.

Locations and Relocations:Modelling, Determinants, and Interrelations

Empirical studies on industrial location do not typically distinguish between new and relocated establishments. This paper addresses this shortcoming using data on the frequency of these events in municipalities of the same economic-administrative region. This enables us to test not only for differences in their determinants but also for interrelations between start-ups and relocations. Estimates from count regression models for cross-section and panel data show that, although partial effects differ, common patterns arise in “institutional” and “neoclassical” explanatory factors. Also, start-ups and relocations are positive but asymmetrically related. JEL classification: C25, R30, R10. Keywords: cities, count data models, industrial location

Individual-based modelling of bacterial cultures to study the lag ohase

Els bacteris són la forma dominant de vida del planeta: poden sobreviure en medis molt adversos, i en alguns casos poden generar substàncies que quan les ingerim ens són tòxiques. La seva presència en els aliments fa que la microbiologia predictiva sigui un camp imprescindible en la microbiologia dels aliments per garantir la seguretat alimentària. Un cultiu bacterià pot passar per quatre fases de creixement: latència, exponencial, estacionària i de mort. En aquest treball s’ha avançat en la comprensió dels fenòmens intrínsecs a la fase de latència, que és de gran interès en l’àmbit de la microbiologia predictiva. Aquest estudi, realitzat al llarg de quatre anys, s’ha abordat des de la metodologia Individual-based Modelling (IbM) amb el simulador INDISIM (INDividual DIScrete SIMulation), que ha estat millorat per poder fer-ho. INDISIM ha permès estudiar dues causes de la fase de latència de forma separada, i abordar l’estudi del comportament del cultiu des d’una perspectiva mesoscòpica. S’ha vist que la fase de latència ha de ser estudiada com un procés dinàmic, i no definida per un paràmetre. L’estudi de l’evolució de variables com la distribució de propietats individuals entre la població (per exemple, la distribució de masses) o la velocitat de creixement, han permès distingir dues etapes en la fase de latència, inicial i de transició, i aprofundir en la comprensió del que passa a nivell cel•lular. S’han observat experimentalment amb citometria de flux diversos resultats previstos per les simulacions. La coincidència entre simulacions i experiments no és trivial ni casual: el sistema estudiat és un sistema complex, i per tant la coincidència del comportament al llarg del temps de diversos paràmetres interrelacionats és un aval a la metodologia emprada en les simulacions. Es pot afirmar, doncs, que s’ha verificat experimentalment la bondat de la metodologia INDISIM.