Applying a Systems Approach to the Analysis of the Benefits of Conversion to Organic Production

Although the current level of organic production in industrialised countries amounts to little more than 1-2 percent, it is recognised that one of the major issues shaping agricultural output over the next several decades will be the demand for organic produce (Dixon et al. 2001). In Australia, the issues of healthy food and environmental concern contribute to increasing demand and market volumes for organic produce. However, in Indonesia, using more economical inputs for organic production is a supply-side factor driving organic production. For individual growers and processors, conversion from conventional to organic agriculture is often a challenging step, entailing a thorough revision of established practices and heightened market insecurity. This paper examines the potential for a systems approach to the analysis of the conversion process, to yield insights for household and community decisions. A framework for applying farming systems research to investigate the benefits of organic production in both Australia and Indonesia is discussed. The framework incorporates scope for farmer participation, crucial to the understanding of farming systems; analysis of production; and relationships to resources, technologies, markets, services, policies and institutions in their local cultural context. A systems approach offers the potential to internalise the external effects that may be constraining decisions to convert to organic production, and for the design of decision-making tools to assist households and the community. Systems models can guide policy design and serve as a mechanism for predicting the impact of changes to the policy and market environments. The increasing emphasis of farming systems research on community and environment in recent years is in keeping with the proposed application to organic production, processing and marketing issues. The approach will also facilitate the analysis of critical aspects of the Australian production, marketing and policy environment, and the investigation of these same features in an Indonesian context.

Benchmarking for information systems management using issues framework studies:cContent and methodology

As a means of benchmarking their position and assisting with anticipating an uncertain future, the identification of critical information systems (IS) management issues frameworks is becoming an increasingly important research task for both academics and industrialists. This paper provides a description and summary of previous work on identifying IS issues frameworks by reviewing 20 research investigations in terms of what they studied and how they were conducted. It also suggests some possible directions and methodologies for future research. The summary and suggestions for further work are applicable for issues framework research in the IS management field as well as in other business and management areas.

The dynamics of HRM systems in Indian BPO firms

This paper highlights the context within which business process outsourcing (BPO) has rapidly grown in India and the critical need to investigate the dynamics of human resource management (HRM) practices and systems in this sector. Using a mixed-method approach involving both in-depth interviews and self-completing questionnaires, we analyze the nature of HRM systems in BPO organizations operating in India. The analysis is based on a sample of 51 BPO companies, a majority of which are located near the capital of New Delhi. The results focus on the nature and structure of work and organization of Indian BPOs, as well as the strategic role played by HRM in such organizations. Furthermore, the findings highlight the way specific HRM practices such as recruitment, performance appraisal, training and development, and compensations are implemented. Our study suggests the existence of formal, structured, and rationalized HRM systems in Indian BPOs. A number of insights related to HRM policies and practices are shared by the HR managers interviewed shedding more light on the inner workings of the Indian BPO companies and their challenges. The analysis provides original and useful information to both academics and practitioners and opens avenues for future research on the nature of HRM systems and practices in the Indian BPO industry.

Improving performance? The adoption and implementation of quality systems in U.K. nonprofits

There are increasing and multiple pressures on nonprofit organizations to demonstrate excellence in performance. Although there is a growing literature on the various approaches to performance improvement taken by nonprofits, little is known about the processes involved in the adoption and implementation of specific approaches. This article is about the adoption and use of one approach to performance improvement, quality systems, in the U.K. nonprofit sector. We report findings about factors that encourage nonprofits to adopt quality systems. We also analyze the distinctive challenges of implementing quality approaches in a nonprofit sector context and suggest critical success factors. The article concludes with a discussion of the organizational and policy implications of applying the management concepts of quality and performance to the nonprofit sector.

Education as a critical practice

Few today doubt that English Higher Education (HE), like the wider world in which it is located, is in crisis. This is, in part, an economic crisis, as the government response to the current recession seems to be that of introducing the kind of neoliberal ‘shock doctrine’ (Klein 2007) or ‘shock therapy’ (Harvey 2005) that previously resulted in swingeing cuts in public services in Southern nations. Our aim in producing this volume is that these contributions help develop a collective response to the seeming limits of these conditions. We view the strength of these contributions in part as providing palpable evidence of how we and our colleagues are acting with critical hope under current conditions so that we might encourage others to work with us to build, together, more progressive formal and informal education systems that address and seek to redress multiple injustices of the world today.

Why critical pedagogy and popular education matter today

Few today doubt that English Higher Education (HE), like the wider world in which it is located, is in crisis. This is, in part, an economic crisis, as the government response to the current recession seems to be that of introducing the kind of neoliberal ‘shock doctrine’ (Klein 2007) or ‘shock therapy’ (Harvey 2005) that previously resulted in swingeing cuts in public services in Southern nations. Our aim in producing this volume is that these contributions help develop a collective response to the seeming limits of these conditions. We view the strength of these contributions in part as providing palpable evidence of how we and our colleagues are acting with critical hope under current conditions so that we might encourage others to work with us to build, together, more progressive formal and informal education systems that address and seek to redress multiple injustices of the world today.

Critical success factors for IS executive careers

This article qualitatively analyzes the Critical Success Factors (CSFs) for Information Systems (IS) executive careers based on evidence gathered from five case studies carried out in 1997. Typical IS executive career paths are presented within a time series style and the CSFs are interpreted within a descriptive framework by synthesising the case data based on Social Cognitive Theory. The descriptive framework suggests that successful IS executive careers would most likely be achieved by well educated and experienced IS employees who have the right attitude towards both their career and work, together with good performance. They would also exhibit an ability for self-learning and to anticipate future IT uses, as well as having proficient IS management knowledge and skills while working with an appropriate organizational environment. Moreover, the framework systematically indicates the interactions between the coupling factors in the typical career development processes. This provides a benchmark for employees that are aiming at a senior IS executive career against which they can compare their own achievements and aspirations. It also raises propositions for further research on theory building.

A structural method for the design of fault tolerant distributed control systems

Distributed digital control systems provide alternatives to conventional, centralised digital control systems. Typically, a modern distributed control system will comprise a multi-processor or network of processors, a communications network, an associated set of sensors and actuators, and the systems and applications software. This thesis addresses the problem of how to design robust decentralised control systems, such as those used to control event-driven, real-time processes in time-critical environments. Emphasis is placed on studying the dynamical behaviour of a system and identifying ways of partitioning the system so that it may be controlled in a distributed manner. A structural partitioning technique is adopted which makes use of natural physical sub-processes in the system, which are then mapped into the software processes to control the system. However, communications are required between the processes because of the disjoint nature of the distributed (i.e. partitioned) state of the physical system. The structural partitioning technique, and recent developments in the theory of potential controllability and observability of a system, are the basis for the design of controllers. In particular, the method is used to derive a decentralised estimate of the state vector for a continuous-time system. The work is also extended to derive a distributed estimate for a discrete-time system. Emphasis is also given to the role of communications in the distributed control of processes and to the partitioning technique necessary to design distributed and decentralised systems with resilient structures. A method is presented for the systematic identification of necessary communications for distributed control. It is also shwon that the structural partitions can be used directly in the design of software fault tolerant concurrent controllers. In particular, the structural partition can be used to identify the boundary of the conversation which can be used to protect a specific part of the system. In addition, for certain classes of system, the partitions can be used to identify processes which may be dynamically reconfigured in the event of a fault. These methods should be of use in the design of robust distributed systems.

The design of robust protocols for distributed real-time systems

Modern distributed control systems comprise of a set of processors which are interconnected using a suitable communication network. For use in real-time control environments, such systems must be deterministic and generate specified responses within critical timing constraints. Also, they should be sufficiently robust to survive predictable events such as communication or processor faults. This thesis considers the problem of coordinating and synchronizing a distributed real-time control system under normal and abnormal conditions. Distributed control systems need to periodically coordinate the actions of several autonomous sites. Often the type of coordination required is the all or nothing property of an atomic action. Atomic commit protocols have been used to achieve this atomicity in distributed database systems which are not subject to deadlines. This thesis addresses the problem of applying time constraints to atomic commit protocols so that decisions can be made within a deadline. A modified protocol is proposed which is suitable for real-time applications. The thesis also addresses the problem of ensuring that atomicity is provided even if processor or communication failures occur. Previous work has considered the design of atomic commit protocols for use in non time critical distributed database systems. However, in a distributed real-time control system a fault must not allow stringent timing constraints to be violated. This thesis proposes commit protocols using synchronous communications which can be made resilient to a single processor or communication failure and still satisfy deadlines. Previous formal models used to design commit protocols have had adequate state coverability but have omitted timing properties. They also assumed that sites communicated asynchronously and omitted the communications from the model. Timed Petri nets are used in this thesis to specify and design the proposed protocols which are analysed for consistency and timeliness. Also the communication system is mcxielled within the Petri net specifications so that communication failures can be included in the analysis. Analysis of the Timed Petri net and the associated reachability tree is used to show the proposed protocols always terminate consistently and satisfy timing constraints. Finally the applications of this work are described. Two different types of applications are considered, real-time databases and real-time control systems. It is shown that it may be advantageous to use synchronous communications in distributed database systems, especially if predictable response times are required. Emphasis is given to the application of the developed commit protocols to real-time control systems. Using the same analysis techniques as those used for the design of the protocols it can be shown that the overall system performs as expected both functionally and temporally.

A formal methodology for the verification of concurrent systems

There is an increasing emphasis on the use of software to control safety critical plants for a wide area of applications. The importance of ensuring the correct operation of such potentially hazardous systems points to an emphasis on the verification of the system relative to a suitably secure specification. However, the process of verification is often made more complex by the concurrency and real-time considerations which are inherent in many applications. A response to this is the use of formal methods for the specification and verification of safety critical control systems. These provide a mathematical representation of a system which permits reasoning about its properties. This thesis investigates the use of the formal method Communicating Sequential Processes (CSP) for the verification of a safety critical control application. CSP is a discrete event based process algebra which has a compositional axiomatic semantics that supports verification by formal proof. The application is an industrial case study which concerns the concurrent control of a real-time high speed mechanism. It is seen from the case study that the axiomatic verification method employed is complex. It requires the user to have a relatively comprehensive understanding of the nature of the proof system and the application. By making a series of observations the thesis notes that CSP possesses the scope to support a more procedural approach to verification in the form of testing. This thesis investigates the technique of testing and proposes the method of Ideal Test Sets. By exploiting the underlying structure of the CSP semantic model it is shown that for certain processes and specifications the obligation of verification can be reduced to that of testing the specification over a finite subset of the behaviours of the process.

Cryptographic techniques for personal communication systems security

The advent of personal communication systems within the last decade has depended upon the utilization of advanced digital schemes for source and channel coding and for modulation. The inherent digital nature of the communications processing has allowed the convenient incorporation of cryptographic techniques to implement security in these communications systems. There are various security requirements, of both the service provider and the mobile subscriber, which may be provided for in a personal communications system. Such security provisions include the privacy of user data, the authentication of communicating parties, the provision for data integrity, and the provision for both location confidentiality and party anonymity. This thesis is concerned with an investigation of the private-key and public-key cryptographic techniques pertinent to the security requirements of personal communication systems and an analysis of the security provisions of Second-Generation personal communication systems is presented. Particular attention has been paid to the properties of the cryptographic protocols which have been employed in current Second-Generation systems. It has been found that certain security-related protocols implemented in the Second-Generation systems have specific weaknesses. A theoretical evaluation of these protocols has been performed using formal analysis techniques and certain assumptions made during the development of the systems are shown to contribute to the security weaknesses. Various attack scenarios which exploit these protocol weaknesses are presented. The Fiat-Sharmir zero-knowledge cryptosystem is presented as an example of how asymmetric algorithm cryptography may be employed as part of an improved security solution. Various modifications to this cryptosystem have been evaluated and their critical parameters are shown to be capable of being optimized to suit a particular applications. The implementation of such a system using current smart card technology has been evaluated.

Critical pedagogy/popular education group

Few today doubt that English Higher Education (HE), like the wider world in which it is located, is in crisis. This is, in part, an economic crisis, as the government response to the current recession seems to be that of introducing the kind of neoliberal ‘shock doctrine’ (Klein 2007) or ‘shock therapy’ (Harvey 2005) that previously resulted in swingeing cuts in public services in Southern nations. Our aim in producing this volume is that these contributions help develop a collective response to the seeming limits of these conditions. We view the strength of these contributions in part as providing palpable evidence of how we and our colleagues are acting with critical hope under current conditions so that we might encourage others to work with us to build, together, more progressive formal and informal education systems that address and seek to redress multiple injustices of the world today.

Inference by replication in densely connected systems

An efficient Bayesian inference method for problems that can be mapped onto dense graphs is presented. The approach is based on message passing where messages are averaged over a large number of replicated variable systems exposed to the same evidential nodes. An assumption about the symmetry of the solutions is required for carrying out the averages; here we extend the previous derivation based on a replica-symmetric- (RS)-like structure to include a more complex one-step replica-symmetry-breaking-like (1RSB-like) ansatz. To demonstrate the potential of the approach it is employed for studying critical properties of the Ising linear perceptron and for multiuser detection in code division multiple access (CDMA) under different noise models. Results obtained under the RS assumption in the noncritical regime give rise to a highly efficient signal detection algorithm in the context of CDMA; while in the critical regime one observes a first-order transition line that ends in a continuous phase transition point. Finite size effects are also observed. While the 1RSB ansatz is not required for the original problems, it was applied to the CDMA signal detection problem with a more complex noise model that exhibits RSB behavior, resulting in an improvement in performance. © 2007 The American Physical Society.

An iterative-style approach to constructing intelligent tutoring systems in mathematics

Mathematics is highly structured and also underpins most of science and engineering. For this reason, it has proved a very suitable domain for Intelligent Tutoring System (ITS) research, with the result that probably more tutoring systems have been constructed for the domain than any other. However, the literature reveals that there still exists no consensus on a credible approach or approaches for the design of such systems, despite numerous documented efforts. Current approaches to the construction of ITSs leave much to be desired. Consequently, existing ITSs in the domain suffer from a considerable number of shortcomings which render them 'unintelligent'. The thesis examines some of the reasons why this is the case. Following a critical review of existing ITSs in the domain, and some pilot studies, an alternative approach to their construction is proposed (the 'iterative-style' approach); this supports an iterative style, and also improves on at least some of the shortcomings of existing approaches. The thesis also presents an ITS for fractions which has been developed using this approach, and which has been evaluated in various ways. It has, demonstrably, improved on many of the limitations of existing ITSs; furthermore, it has been shown to be largely 'intelligent', at least more so than current tutors for the domain. Perhaps more significantly, the tutor has also been evaluated against real students with, so far, very encouraging results. The thesis thus concludes that the novel iterative-style approach is a more credible approach to the construction of ITSs in mathematics than existing techniques.

The human factors of automatic speech recognition in control room systems

This thesis addresses the viability of automatic speech recognition for control room systems; with careful system design, automatic speech recognition (ASR) devices can be useful means for human computer interaction in specific types of task. These tasks can be defined as complex verbal activities, such as command and control, and can be paired with spatial tasks, such as monitoring, without detriment. It is suggested that ASR use be confined to routine plant operation, as opposed the critical incidents, due to possible problems of stress on the operators' speech.  It is proposed that using ASR will require operators to adapt a commonly used skill to cater for a novel use of speech. Before using the ASR device, new operators will require some form of training. It is shown that a demonstration by an experienced user of the device can lead to superior performance than instructions. Thus, a relatively cheap and very efficient form of operator training can be supplied by demonstration by experienced ASR operators. From a series of studies into speech based interaction with computers, it is concluded that the interaction be designed to capitalise upon the tendency of operators to use short, succinct, task specific styles of speech. From studies comparing different types of feedback, it is concluded that operators be given screen based feedback, rather than auditory feedback, for control room operation. Feedback will take two forms: the use of the ASR device will require recognition feedback, which will be best supplied using text; the performance of a process control task will require task feedback integrated into the mimic display. This latter feedback can be either textual or symbolic, but it is suggested that symbolic feedback will be more beneficial. Related to both interaction style and feedback is the issue of handling recognition errors. These should be corrected by simple command repetition practices, rather than use error handling dialogues. This method of error correction is held to be non intrusive to primary command and control operations. This thesis also addresses some of the problems of user error in ASR use, and provides a number of recommendations for its reduction.