889 resultados para cost-effective design


Relevância:

90.00% 90.00%

Publicador:

Resumo:

Noninvasive stress testing might guide the use of aspirin and statins for primary prevention of coronary heart disease, but it is unclear if such a strategy would be cost effective.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Joint hemorrhages are very common in patients with severe hemophilia. Inhibitors in patients with hemophilia are allo-antibodies that neutralize the activity of the clotting factor. After total knee replacement, rare intra-articular bleeding complications might occur that do not respond to clotting factor replacement. We report a 40-year-old male with severe hemophilia A and high responding inhibitors presenting with recurrent knee joint hemorrhage after bilateral knee prosthetic surgery despite adequate clotting factor treatment. There were two episodes of marked postoperative hemarthrosis requiring extensive use of substitution therapy. Eleven days postoperatively, there was further hemorrhage into the right knee. Digital subtraction angiography diagnosed a complicating pseudoaneurysm of the inferior lateral geniculate artery and embolization was successfully performed. Because clotting factor replacement therapy has proved to be excessively expensive and prolonged, especially in patients with inhibitors, we recommend the use of cost-effective early angiographic embolization.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

A simulation model adopting a health system perspective showed population-based screening with DXA, followed by alendronate treatment of persons with osteoporosis, or with anamnestic fracture and osteopenia, to be cost-effective in Swiss postmenopausal women from age 70, but not in men. INTRODUCTION: We assessed the cost-effectiveness of a population-based screen-and-treat strategy for osteoporosis (DXA followed by alendronate treatment if osteoporotic, or osteopenic in the presence of fracture), compared to no intervention, from the perspective of the Swiss health care system. METHODS: A published Markov model assessed by first-order Monte Carlo simulation was refined to reflect the diagnostic process and treatment effects. Women and men entered the model at age 50. Main screening ages were 65, 75, and 85 years. Age at bone densitometry was flexible for persons fracturing before the main screening age. Realistic assumptions were made with respect to persistence with intended 5 years of alendronate treatment. The main outcome was cost per quality-adjusted life year (QALY) gained. RESULTS: In women, costs per QALY were Swiss francs (CHF) 71,000, CHF 35,000, and CHF 28,000 for the main screening ages of 65, 75, and 85 years. The threshold of CHF 50,000 per QALY was reached between main screening ages 65 and 75 years. Population-based screening was not cost-effective in men. CONCLUSION: Population-based DXA screening, followed by alendronate treatment in the presence of osteoporosis, or of fracture and osteopenia, is a cost-effective option in Swiss postmenopausal women after age 70.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Clinical aspects of a simple treatment concept with fixed prostheses in the edentulous jaw are described. Fixed implant-supported reconstructions in the edentulous jaw require multiple implants, are technically complex, aesthetically demanding and metal-ceramic solutions are expensive. Specific surgical techniques to enhance the hard and soft tissue conditions become often necessary. Thus the bar-supported overdenture may be preferred, because problems with aesthetics and alveolar ridge deficiencies can be solved more easily and the number of implants is reduced. Both, the "All-on-Four" technique and the "Procera implant bridge" are simple type of fixed prostheses, comparable to overdentures or complete dentures with regard to design and technology. They present a cost-effective alternative, with predictable aesthetics and optimum passive fit.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

OBJECTIVE: This study aimed to assess the potential cost-effectiveness of testing patients with nephropathies for the I/D polymorphism before starting angiotensin-converting enzyme (ACE) inhibitor therapy, using a 3-year time horizon and a healthcare perspective. METHODS: We used a combination of a decision analysis and Markov modeling technique to evaluate the potential economic value of this pharmacogenetic test by preventing unfavorable treatment in patients with nephropathies. The estimation of the predictive value of the I/D polymorphism is based on a systematic review showing that DD carriers tend to respond well to ACE inhibitors, while II carriers seem not to benefit adequately from this treatment. Data on the ACE inhibitor effectiveness in nephropathy were derived from the REIN (Ramipril Efficacy in Nephropathy) trial. We calculated the number of patients with end-stage renal disease (ESRD) prevented and the differences in the incremental costs and incremental effect expressed as life-years free of ESRD. A probabilistic sensitivity analysis was conducted to determine the robustness of the results. RESULTS: Compared with unselective treatment, testing patients for their ACE genotype could save 12 patients per 1000 from developing ESRD during the 3 years covered by the model. As the mean net cost savings was euro 356,000 per 1000 patient-years, and 9 life-years free of ESRD were gained, selective treatment seems to be dominant. CONCLUSION: The study suggests that genetic testing of the I/D polymorphism in patients with nephropathy before initiating ACE therapy will most likely be cost-effective, even if the risk for II carriers to develop ESRD when treated with ACE inhibitors is only 1.4% higher than for DD carriers. Further studies, however, are required to corroborate the difference in treatment response between ACE genotypes, before genetic testing can be justified in clinical practice.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Inductive-capacitive (LC) resonant circuit sensors are low-cost, wireless, durable, simple to fabricate and battery-less. Consequently, they are well suited to sensing applications in harsh environments or in situations where large numbers of sensors are needed. They are also advantageous in applications where access to the sensor is limited or impossible or when sensors are needed on a disposable basis. Due to their many advantages, LC sensors have been used for sensing a variety of parameters including humidity, temperature, chemical concentrations, pH, stress/pressure, strain, food quality and even biological growth. However, current versions of the LC sensor technology are limited to sensing only one parameter. The purpose of this work is to develop new types of LC sensor systems that are simpler to fabricate (hence lower cost) or capable of monitoring multiple parameters simultaneously. One design presented in this work, referred to as the multi-element LC sensor, is able to measure multiple parameters simultaneously using a second capacitive element. Compared to conventional LC sensors, this design can sense multiple parameters with a higher detection range than two independent sensors while maintaining the same overall sensor footprint. In addition, the two-element sensor does not suffer from interference issues normally encountered while implementing two LC sensors in close proximity. Another design, the single-spiral inductive-capacitive sensor, utilizes the parasitic capacitance of a coil or spring structure to form a single layer LC resonant circuit. Unlike conventional LC sensors, this design is truly planar, thus simplifying its fabrication process and reducing sensor cost. Due to the simplicity of this sensor layout it will be easier and more cost-effective for embedding in common building or packaging materials during manufacturing processes, thereby adding functionality to current products (such as drywall sheets) while having a minor impact on overall unit cost. These modifications to the LC sensor design significantly improve the functionality and commercial feasibility of this technology, especially for applications where a large array of sensors or multiple sensing parameters are required.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Dual energy X-ray absorptiometry (DXA) is widely accepted as the reference method for diagnosis and monitoring of osteoporosis and for assessment of fracture risk, especially at hip. However, axial-DXA is not suitable for mass screening, because it is usually confined to specialized centers. We propose a two-step diagnostic approach to postmenopausal osteoporosis: the first step, using an inexpensive, widely available screening technique, aims at risk stratification in postmenopausal women; the second step, DXA of spine and hip is applied only to potentially osteoporotic women preselected on the basis of the screening measurement. In a group of 110 healthy postmenopausal woman, the capability of various peripheral bone measurement techniques to predict osteoporosis at spine and/or hip (T-score < -2.5SD using DXA) was tested using receiver operating characteristic (ROC) curves: radiographic absorptiometry of phalanges (RA), ultrasonometry at calcaneus (QUS. CALC), tibia (SOS.TIB), and phalanges (SOS.PHAL). Thirty-three women had osteoporosis at spine and/or hip with DXA. Areas under the ROC curves were 0.84 for RA, 0.83 for QUS.CALC, 0.77 for SOS.PHAL (p < 0.04 vs RA) and 0.74 for SOS.TIB (p < 0.02 vs RA and p = 0.05 vs QUS.CALC). For levels of sensitivity of 90%, the respective specificities were 67% (RA), 64% (QUS.CALC), 48% (SOS.PHAL), and 39% (SOS.TIB). In a cost-effective two-step, the price of the first step should not exceed 54% (RA), 51% (QUS.CALC), 42% (SOS.PHAL), and 25% (SOS.TIB). In conclusion, RA, QUS.CALC, SOS.PHAL, and SOS.TIB may be useful to preselect postmenopausal women in whom axial DXA is indicated to confirm/exclude osteoporosis at spine or hip.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Mittels generativer Fertigung ist es heute möglich die, Entwicklungszeit und Ferti-gungsdauer von Prototypen, Produkten und Werkzeugen zu verkürzen. Neben dieser Zeitersparnis sind die im Vergleich zu konventionellen Fertigungsverfahren unwe-sentlichen Geometriebeschränkungen für den Anwender von besonderem Interesse. Dieses Alleinstellungsmerkmal der generativen Fertigung macht es möglich auch komplexe Geometrie wirtschaftlich herzustellen. Voraussetzung für eine wirtschaftli-che und fehlerminimierte Fertigung ist hierbei eine möglichst optimale Prozessvorbe-reitung (Pre-Processing). Dabei sind insbesondere die Schritte der Bauteilorientie-rung, der Stützkonstruktionserzeugung, der Schichtzerlegung sowie der Bauraum-ausnutzung von Interesse. Auch wenn diese Punkte wesentlich zur Qualität und Wirtschaftlichkeit beitragen, sind die Erkenntnisse für den unerfahrenen Anwender nur unzureichend dokumentiert, wodurch eine möglichst effiziente Fertigung zu-nächst ausgeschlossen werden kann. Anhand unterschiedlicher Beispiele sollen dem Anwender hier die Möglichkeiten zur Optimierung dieser Pre-Processing Schritte er-läutert werden. In diesem Rahmen werden die aktuellen Forschungsergebnisse des Lehrstuhls Rechnereinsatz in der Konstruktion, Institut für Produkt Engineering der Universität Duisburg-Essen in Bezug auf die Optimierung der Bauteilorientierung, der variablen Schichtzerlegung und der Optimierung der Bauraumausnutzung vorgestellt.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Background: WHO's 2013 revisions to its Consolidated Guidelines on antiretroviral drugs recommend routine viral load monitoring, rather than clinical or immunological monitoring, as the preferred monitoring approach on the basis of clinical evidence. However, HIV programmes in resource-limited settings require guidance on the most cost-effective use of resources in view of other competing priorities such as expansion of antiretroviral therapy coverage. We assessed the cost-effectiveness of alternative patient monitoring strategies. Methods: We evaluated a range of monitoring strategies, including clinical, CD4 cell count, and viral load monitoring, alone and together, at different frequencies and with different criteria for switching to second-line therapies. We used three independently constructed and validated models simultaneously. We estimated costs on the basis of resource use projected in the models and associated unit costs; we quantified impact as disability-adjusted life years (DALYs) averted. We compared alternatives using incremental cost-effectiveness analysis. Findings: All models show that clinical monitoring delivers significant benefit compared with a hypothetical baseline scenario with no monitoring or switching. Regular CD4 cell count monitoring confers a benefit over clinical monitoring alone, at an incremental cost that makes it affordable in more settings than viral load monitoring, which is currently more expensive. Viral load monitoring without CD4 cell count every 6—12 months provides the greatest reductions in morbidity and mortality, but incurs a high cost per DALY averted, resulting in lost opportunities to generate health gains if implemented instead of increasing antiretroviral therapy coverage or expanding antiretroviral therapy eligibility. Interpretation: The priority for HIV programmes should be to expand antiretroviral therapy coverage, firstly at CD4 cell count lower than 350 cells per μL, and then at a CD4 cell count lower than 500 cells per μL, using lower-cost clinical or CD4 monitoring. At current costs, viral load monitoring should be considered only after high antiretroviral therapy coverage has been achieved. Point-of-care technologies and other factors reducing costs might make viral load monitoring more affordable in future. Funding: Bill & Melinda Gates Foundation, WHO.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

QUESTION UNDER STUDY The aim of this study was to evaluate the cost-effectiveness of ticagrelor and generic clopidogrel as add-on therapy to acetylsalicylic acid (ASA) in patients with acute coronary syndrome (ACS), from a Swiss perspective. METHODS Based on the PLATelet inhibition and patient Outcomes (PLATO) trial, one-year mean healthcare costs per patient treated with ticagrelor or generic clopidogrel were analysed from a payer perspective in 2011. A two-part decision-analytic model estimated treatment costs, quality-adjusted life years (QALYs), life years and the cost-effectiveness of ticagrelor and generic clopidogrel in patients with ACS up to a lifetime at a discount of 2.5% per annum. Sensitivity analyses were performed. RESULTS Over a patient's lifetime, treatment with ticagrelor generates an additional 0.1694 QALYs and 0.1999 life years at a cost of CHF 260 compared with generic clopidogrel. This results in an Incremental Cost Effectiveness Ratio (ICER) of CHF 1,536 per QALY and CHF 1,301 per life year gained. Ticagrelor dominated generic clopidogrel over the five-year and one-year periods with treatment generating cost savings of CHF 224 and 372 while gaining 0.0461 and 0.0051 QALYs and moreover 0.0517 and 0.0062 life years, respectively. Univariate sensitivity analyses confirmed the dominant position of ticagrelor in the first five years and probabilistic sensitivity analyses showed a high probability of cost-effectiveness over a lifetime. CONCLUSION During the first five years after ACS, treatment with ticagrelor dominates generic clopidogrel in Switzerland. Over a patient's lifetime, ticagrelor is highly cost-effective compared with generic clopidogrel, proven by ICERs significantly below commonly accepted willingness-to-pay thresholds.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

PURPOSE To explore the cost-effectiveness of using drug-eluting balloon (DEB) angioplasty for the treatment of femoropopliteal arterial lesions, which has been shown to significantly lower the rates of target lesion revascularization (TLR) compared with standard balloon angioplasty (BA). METHODS A simplified decision-analytic model based on TLR rates reported in the literature was applied to baseline and follow-up costs associated with in-hospital patient treatment during 1 year of follow-up. Costs were expressed in Swiss Francs (sFr) and calculated per 100 patients treated. Budgets were analyzed in the context of current SwissDRG reimbursement figures and calculated from two different perspectives: a general budget on total treatment costs (third-party healthcare payer) as well as a budget focusing on the physician/facility provider perspective. RESULTS After 1 year, use of DEB was associated with substantially lower total inpatient treatment costs when compared with BA (sFr 861,916 vs. sFr 951,877) despite the need for a greater investment at baseline related to higher prices for DEBs. In the absence of dedicated reimbursement incentives, however, use of DEB was shown to be the financially less favorable treatment approach from the physician/facility provider perspective (12-month total earnings: sFr 179,238 vs. sFr 333,678). CONCLUSION Use of DEBs may be cost-effective through prevention of TLR at 1 year of follow-up. The introduction of dedicated financial incentives aimed at improving DEB reimbursements may help lower total healthcare costs.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

BACKGROUND: Social anxiety disorder (SAD) is one of the most common mental disorders and causes subjective suffering and economic burden worldwide. Although effective treatments are available, a lot of cases go untreated. Internet-based self-help is a low-threshold and flexible treatment alternative for SAD. Various studies have already shown that internet-based self-help can be effective to reduce social phobic symptoms significantly. Most of the interventions tested include therapist support, whereas the role of peer support within internet-based self-help has not yet been fully understood. There is evidence suggesting that patients' mutual exchange via integrated discussion forums can increase the efficacy of internet-based treatments. This study aims at investigating the added value of therapist-guided group support on the treatment outcome of internet-based self-help for SAD. METHODS/DESIGN: The study is conducted as a randomized controlled trial. A total of 150 adults with a diagnosis of SAD are randomly assigned to either a waiting-list control group or one of the active conditions. The participants in the two active conditions use the same internet-based self-help program, either with individual support by a psychologist or therapist-guided group support. In the group guided condition, participants can communicate with each other via an integrated, protected discussion forum. Subjects are recruited via topic related websites and links; diagnostic status will be assessed with a telephone interview. The primary outcome variables are symptoms of SAD and diagnostic status after the intervention. Secondary endpoints are general symptomology, depression, quality of life, as well as the primary outcome variables 6 months later. Furthermore, process variables such as group processes, the change in symptoms and working alliance will be studied. DISCUSSION: The results of this study should indicate whether group-guided support could enhance the efficacy of an internet-based self-help treatment for SAD. This novel treatment format, if shown effective, could represent a cost-effective option and could further be modified to treat other conditions, as well.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

: Noncommunicable diseases (NCDs) account for a growing burden of morbidity and mortality among people living with HIV in low- and middle-income countries (LMICs). HIV infection and antiretroviral therapy interact with NCD risk factors in complex ways, and research into this "web of causation" has so far been largely based on data from high-income countries. However, improving the understanding, treatment, and prevention of NCDs in LMICs requires region-specific evidence. Priority research areas include: (1) defining the burden of NCDs among people living with HIV, (2) understanding the impact of modifiable risk factors, (3) evaluating effective and efficient care strategies at individual and health systems levels, and (4) evaluating cost-effective prevention strategies. Meeting these needs will require observational data, both to inform the design of randomized trials and to replace trials that would be unethical or infeasible. Focusing on Sub-Saharan Africa, we discuss data resources currently available to inform this effort and consider key limitations and methodological challenges. Existing data resources often lack population-based samples; HIV-negative, HIV-positive, and antiretroviral therapy-naive comparison groups; and measurements of key NCD risk factors and outcomes. Other challenges include loss to follow-up, competing risk of death, incomplete outcome ascertainment and measurement of factors affecting clinical decision making, and the need to control for (time-dependent) confounding. We review these challenges and discuss strategies for overcoming them through augmented data collection and appropriate analysis. We conclude with recommendations to improve the quality of data and analyses available to inform the response to HIV and NCD comorbidity in LMICs.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

BACKGROUND Anthelmintic drugs have been widely used in sheep as a cost-effective means for gastro-intestinal nematode (GIN) control. However, growing anthelmintic resistance (AHR) has created a compelling need to identify evidence-based management recommendations that reduce the risk of further development and impact of AHR. OBJECTIVE To identify, critically assess, and synthesize available data from primary research on factors associated with AHR in sheep. METHODS Publications reporting original observational or experimental research on selected factors associated with AHR in sheep GINs and published after 1974, were identified through two processes. Three electronic databases (PubMed, Agricola, CAB) and Web of Science (a collection of databases) were searched for potentially relevant publications. Additional publications were identified through consultation with experts, manual search of references of included publications and conference proceedings, and information solicited from small ruminant practitioner list-serves. Two independent investigators screened abstracts for relevance. Relevant publications were assessed for risk of systematic bias. Where sufficient data were available, random-effects Meta-Analyses (MAs) were performed to estimate the pooled Odds Ratio (OR) and 95% Confidence Intervals (CIs) of AHR for factors reported in ≥2 publications. RESULTS Of the 1712 abstracts screened for eligibility, 131 were deemed relevant for full publication review. Thirty publications describing 25 individual studies (15 observational studies, 7 challenge trials, and 3 controlled trials) were included in the qualitative synthesis and assessed for systematic bias. Unclear (i.e. not reported, or unable to assess) or high risk of selection bias and confounding bias was found in 93% (14/15) and 60% (9/15) of the observational studies, respectively, while unclear risk of selection bias was identified in all of the trials. Ten independent studies were included in the quantitative synthesis, and MAs were performed for five factors. Only high frequency of treatment was a significant risk factor (OR=4.39; 95% CI=1.59, 12.14), while the remaining 4 variables were marginally significant: mixed-species grazing (OR=1.63; 95% CI=0.66, 4.07); flock size (OR=1.02; 95% CI=0.97, 1.07); use of long-acting drug formulations (OR=2.85; 95% CI=0.79, 10.24); and drench-and-shift pasture management (OR=4.08; 95% CI=0.75, 22.16). CONCLUSIONS While there is abundant literature on the topic of AHR in sheep GINs, few studies have explicitly investigated the association between putative risk or protective factors and AHR. Consequently, several of the current recommendations on parasite management are not evidence-based. Moreover, many of the studies included in this review had a high or unclear risk of systematic bias, highlighting the need to improve study design and/or reporting of future research carried out in this field.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

OBJECTIVE To determine the prevalence of methicillin-resistant Staphylococcus aureus (MRSA) nasal colonization in hemodialysis patients and to analyze the cost-effectiveness of our screening approach compared with an alternative strategy. DESIGN Screening study and cost-effectiveness analysis. METHODS Analysis of twice-yearly MRSA prevalence studies conducted in the hemodialysis unit of a 950-bed tertiary care hospital from January 1, 2004, through December 31, 2013. For this purpose, nasal swab samples were cultured on MRSA screening agar (mannitol-oxacillin biplate). RESULTS There were 20 mass screenings during the 10-year study period. We identified 415 patients participating in at least 1 screening, with an average of 4.5 screenings per patient. Of 415 screened patients, 15 (3.6%) were found to be MRSA carriers. The first mass screening in 2004 yielded the highest percentage of MRSA (6/101 [6%]). Only 7 subsequent screenings revealed new MRSA carriers, whereas 4 screenings confirmed previously known carriers, and 8 remained negative. None of the carriers developed MRSA bacteremia during the study period. The total cost of our screening approach, that is, screening and isolation costs, was US $93,930. The total cost of an alternative strategy (ie, no mass screening administered) would be equivalent to costs of isolation of index cases and contact tracing was estimated to be US $5,382 (difference, US $88,548). CONCLUSIONS In an area of low MRSA endemicity (<5%), regular nasal screenings of a high-risk population yielded a low rate of MRSA carriers. Twice-yearly MRSA screening of dialysis patients is unlikely to be cost-effective if MRSA prevalence is low. Infect. Control Hosp. Epidemiol. 2015;00(0):1-4.