1000 resultados para condicionamento térmico
Resumo:
The effect of electrical discharges without thermic effect and of energy field on Meloidogyne incognita Rara 1 larvae elimination in weir water was tested. on an average, 63,22% of larvae were killed by electrical discharges, in comparison with 53,12% of dead larvae in the control (water that received only ammonium sulphate) as an electrolyte. Water exposed to energy fields presented higher percentages of dead larvae (50,01% for electromagnetic field, 43,78% for variable electric field and 40,48% for static electric field) in comparison with control, represented by water without exposition to any energy field and without ammonium sulphate (34,27%).
Resumo:
A study of the geological characteristics of the Buaru Group basaltic substratum and stratigraphical unities was carried out, taking into account the groundwater exploration in S.Jose do Rio Preto area. The presence of the tectonic structures in this substratum exercised a profound influence on the sedimentation of the Bauru Group and on the variations in the hydrological properties of the sediments of the area.-English summary
Resumo:
It was verified the penetration of phosphoric acid into 3 commercial calcium hydroxide-based cements (Life, Renew and Prisma VLC Dycal). The colorimetric method employed permitted the identidication of phosphorus amount in representative samples of 6 successive layers 0.1 mm thick of each material. The acid etching used were the commercial products Scotchbond Etching Gel--3M at 36.114% by weight and Solução Condicionadora--Johnson & Johnson at 36.054% by weight. The contact time was 60 seconds. The result showed that layers 0.1 mm tick for Life and Prisma VLC Dycal and 0.2 mm thick for Renew were able to block the penetration of phosphoric acid solution whereas layers 0.1 mm thick for the 3 cements were able to block the penetration of phosphoric acid gel.
Resumo:
The purpose of this in vitro study was to investigate the cervical marginal leakage in class II restorations with chemically cured resin (P10) and light-cured resin (P30) in two types of cavities: conventional and adhesive. The effect of acid-etching in this area was also observed. Dentine adhesive Scotchbond was used in all experimental groups. Leakage was evidenced by Rodamina B dye penetration after thermocycling procedure between 10 degrees C and 50 degrees C temperature and analysed by using Zeiss Stereoscopic Magnifying Glass (10 X). According to the results obtained marginal leakage occurred in all experimental groups, with lower percentage for adhesives cavities when enamel acid-etching and light-cured resin P30 was used.
Resumo:
An equation based on heat transfer theory was presented to estimate the rate of heat loss from cattle exposed to a tropical environment, specified by the air temperature, humidity, solar radiation, and wind speed. The animals' variables (sweating rate, rectal temperature, respiratory rate, surface temperature, haircoat color, and body weight) were considered together with environmental variables (air temperature and humidity, solar radiation, wind speed, and globe temperature). The equation allows the prediction of (a) the metabolic heat production level necessary to balance heat losses under specified environmental conditions; (b) the combination of environmental factors that provide a determined heat flux between a given animal and its environment.
Resumo:
Tetrahydroborate complexes of copper (I) with bidentate phosphines, [Cu(η 2-BH 4)(dppm)] (1), [Cu(η 2-BH 4)(dppe)] (2), [Cu(η 2-BH 4)(cis-dppet)] (3) and [Cu(η 2-BH 4)(dppb)] (4) (dppm = bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino) ethane; cis-dppet = 1,2-cis(diphenylphosphino)ethene; dppb = 1,4-bis(diphenylphosphino)butane) were prepared and characterized by elemental analysis, infrared spectroscopy, NMR and thermogravimetric analysis. The IR data for 1-4 showed bands typical of a bidentate coordination of BH 4 group to the copper atom and the 31P{ 1H} NMR spectra indicated that the phosphorous atoms are chelating the metal centre. The thermal behavior of the compounds was investigated and suggested that their thermal stability is influenced by the phosphines. Their thermal stability decreased as follows: [Cu(η 2-BH 4)(dppe)] (2) > [Cu(η 2-BH 4)(dppm)] (1) > [Cu(η 2-BH 4)(dppb)] (4) > [Cu(η 2-BH 4)(cis-dppet)] (3). According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving Cu(BO 2) 2, CuO, CuO 2 and Cu as final products.
Resumo:
Lithium niobate (LiNbO3) thin films with 1/1 stoichiometry were prepared by a spin-coating from polymeric precursor method. The films deposited on silicon (100) substrates, were thermally treated from 400° to 600°C for 3 hours in order to study the influence of thermal treatment on the crystallinity, microstructure, grain size and roughness. X-ray diffraction (XRD) results showed that LiNbO3 phase crystallizes at low temperature (400°C). It was observed by scanning electron microscopy (SEM) that it is possible to obtain dense thin films at temperatures around 500°C. The atomic force microscopy (AFM) results showed that the grain size and roughness are strongly influenced by the annealing temperature.
Resumo:
Since the use of air abrasion has grown in pediatric dentistry, the aim of this study was to evaluate, by means of shear bond strength testing, the need to use the total etching technique or self-etching primers on dentin of primary teeth after air abrasion. Twenty-five exfoliated primary molars had their occlusal dentin exposed by trimming and polishing. Specimens were treated by: Air abrasion + Scotchbond MultiPurpose adhesive (G1); 37% phosphoric acid + Scotchbond MP adhesive (G2); Clearfil SE (G3); Air abrasion ( 37% phosphoric acid + Scotchbond MP adhesive (G4); Air abrasion + Clearfil SE (G5). On the treated surface, a cylinder of 2 mm by 6 mm was made using a composite resin (Z100). Duncan's test showed that: (G2 = G3 = G5) > (G1 = G4). The use of a selfetching primer on air abraded dentin is recommended to obtain higher bond strengths.
Resumo:
Background and objective: It has been shown that aerobic exercise is useful to reduce arterial pressure, however, the effectiveness of an exercise program is still controversial and not very well analyzed among populations with low-income. The objective of the present study was to set up an individualized physical fitness program - Projeto Hipertensão - focused on hypertensive people, patients from a Health Basic Unit (HBU) and, after that, to investigate the effects of this program on physical fitness, metabolic profile and pressure levels. Methods: Sixteen hypertensive women (56 ± 3yrs) under regular pharmacological treatment underwent 4 months of a supervised aerobic and stretching exercise program (3 sessions/wk, 90 min/session, 60% of V̇O 2 max). Several physical and metabolic variables were compared before and after 4 months of training. Results: Training significantly reduced systolic arterial pressure (SAP, -6%), improved cardio-respiratory fitness (+42% of V̇O2max), flexibility (+11%) and plasma glucose content (-4%). BMI and % fat did not change. Besides modifying metabolic profile, it was found that training presented significant correlations between individual initial values of cholesterol total level (CT), high density lipoprotein (HDL-C) and low density lipoprotein (LDL-C) and its responses after exercise. Conclusions: The study shows that exercise programs can be personalized for hypertensive patients from a HBU and confirms the effectiveness of exercise on AP, physical fitness, flexibility and lipid profile on hypertensive patients. The expressive reduction of AP in hypertensive subjects suggests that this exercise intervention should be emphasized on other health centers which assist low-income population.
Resumo:
Introduction: The lack of physical exercises generated by immobilization of the lower limbs leads to changes in body composition that are generally associated with the imbalance of metabolic rate coupled with a sedentary status, which can result in obesity, diabetes mellitus and cardiovascular disease. Therefore, the improvement of physical fitness can contribute to promoting health and quality of life for these patients. As there is a very small number of research in this direction, our purpose was to investigate the effects of an adapted swimming program in protocol interval, for people with spinal cord injury, aiming to verify the improvement of your fitness and, consequently, some biochemical variables important for health. Methodology: The study included 17 subjects with spinal cord injury, sedentary, divided into two groups: 11 participants in the training group (TG) and 6 in control group (CG). TG was applied by a protocol of interval training in swimming for eight consecutive weeks, three times a week. The protocol employed a stroke of breaststroke in work periods of moderate to severe, and stroke in the backstroke, in periods of active recovery. The CG has not participated in any physical activity. Both groups were collecting blood for biochemical analysis, before (evaluation) and after (revaluation) the swimming program. Results and Discussion: The concentrations of triglycerides, total cholesterol and LDL-cholesterol showed no significant changes in assessment for reassessment in both groups. However the TG, the level of HDL-cholesterol were significant differences (p=0,0110), showing an improvement in posttraining, which did not occur in the CG. With respect to the state of fitness, the results revealed a significant difference in relation to time and distance covered in water when compared with the pre-training (p<0,001), showing a great improvement in the ability to shift with the stroke of breaststroke and a significant improvement in cardiorespiratory function. Conclusion: The swimming program interval used, with moderate to severe intensity, can even in a short period of time, promote positive changes in HDLcholesterol in individuals with spinal cord injury studied, and substantially improve your fitness.
Resumo:
To better understand the differences related to HS resistance between Bos indicus and Bos taurus, we aim to verify if the HS tolerance is due mostly to the genetic contribution from the oocyte, spermatozoa or both. Oocytes from Nelore and crossbreed Holstein cows (cHST) were collected, matured and fertilized with semen from Nelore (N), Angus (An), Brahman (Bra) and Gir (Gir) bulls. Nine six hours post insemination (hpi), ≥ 16 cells embryos were separated in two groups: control and HS. In control group, embryos were cultured at 39°C, whereas in the HS group, embryos were subjected to 41°C for 12 h, and then returned to 39°C. There was no effect of HS on blastocyst and hatched blastocyst rates in all breeds analyzed. The percentage of oocytes that cleaved and reached morula stage was significantly lower (p < 0.05) in cHST x Gir as compared to the other breeds. Additionally, blastocyst rates was higher in cHST x N than in cHST x An and cHST x Gir (p < 0.05). It was concluded that the oocyte is more important than the spermatozoa for the development of thermotolerance, since the breed of the bull did not influence embryo development after HS.
Resumo:
The consumer market demands food without pesticide residues. Therefore, this study focused on evaluating the control of green mold in Pera orange trees with biocontrol agents (Bacillus subtilis, Bacillus licheniformis and Bacillus subtilis (QST 713)), associated or not with heat treatment. The fruit was obtained in packinghouse before processing, being washed and disinfected with the use of Sodium Hypochlorite. Fruits submitted to these treatments were stored from 11 to 28 days at temperature of 10 °C and RH 90%±5 or for eight days at 20 °C and 90%±5. In general, the heat treatment reduced the disease severity determine by the area under the disease progress curve in the fruit and the incidence of natural postharvest disease in Pera oranges. On the other hand, biocontrol agents did not control the disease, showing that the organisms tested did not present curative activity against the green mold.
Resumo:
Pós-graduação em Agronomia (Agricultura) - FCA
Resumo:
Pós-graduação em Agronomia (Agricultura) - FCA