Supporting real-time distributed computer-controlled systems with multi-hop P-NET networks

Fieldbus communication networks aim to interconnect sensors, actuators and controllers within process control applications. Therefore, they constitute the foundation upon which real-time distributed computer-controlled systems can be implemented. P-NET is a fieldbus communication standard, which uses a virtual token-passing medium-access-control mechanism. In this paper pre-run-time schedulability conditions for supporting real-time traffic with P-NET networks are established. Essentially, formulae to evaluate the upper bound of the end-to-end communication delay in P-NET messages are provided. Using this upper bound, a feasibility test is then provided to check the timing requirements for accessing remote process variables. This paper also shows how P-NET network segmentation can significantly reduce the end-to-end communication delays for messages with stringent timing requirements.

Real-time communications over wired/wireless PROFIBUS networks supporting inter-cell mobility

PROFIBUS is an international standard (IEC 61158, EN 50170) for factory-floor communications, with several thousands of installations worldwide. Taking into account the increasing need for mobile devices in industrial environments, one obvious solution is to extend traditional wired PROFIBUS networks with wireless capabilities. In this paper, we outline the major aspects of a hybrid wired/wireless PROFIBUS-based architecture, where most of the design options were made in order to guarantee the real-time behaviour of the overall network. We also introduce the timing unpredictability problems resulting from the co-existence of heterogeneous physical media in the same network. However, the major focus of this paper is on how to guarantee real-time communications in such a hybrid network, where nodes (and whole segments) can move between different radio cells (inter-cell mobility). Assuming a simple mobility management mechanism based on mobile nodes performing periodic radio channel assessment and switching, we propose a methodology to compute values for specific parameters that enable an optimal (minimum) and bounded duration of the handoff procedure.

Product placement in integrated marketing communications strategy

Perinteisten markkinointiviestintäkanavien menettäessä jatkuvasti tehoaan mediakentän ja kohderyhmien sirpaloituessa yhä pienempiin yksiköihin markkinointiorganisaatiot etsivät vaihtoehtoisia tapoja tavoittaakseen kohdeyleisönsä. Yksi vaihtoehtoinen markkinointiviestintäkeino on tuotesijoittelu (product placement), jossa (merkki)tuotteita sijoitetaan erilaisten viihdetuotantojen, kuten elokuvien, televisio-ohjelmien ja tietokonepelien, tarinan yhteyteen, jotta yhä medialukutaitoisempi kohdeyleisö ei pystyisi välttämään kaupallista viestiä esimerkiksi vaihtamalla televisiokanavaa tai kääntämällä lehden sivua. Koska tuote on sijoitettu kerrottavan tarinan sisään, markkinointiviestin — eli tuotteen havaitsemisen — välttäminen on huomattavasti vaikeampaa kuin perinteisten markkinointiviestintämenetelmien kohdalla. Lisäksi, sijoitellut tuotteet ovat tavallisesti kiinteässä yhteydessä tarinan juonen ja henkilöhahmojen kanssa siten, että tuote saa näistä yhteyksistä positiivista vahvistusta imagolleen. Pro Gradu-tutkielman tarkoituksena oli selvittää tuotesijoittelun käyttökelpoisuutta markkinointiviestinnässä sekä miten kulutushyödykemarkkinoijat voivat hyödyntää menetelmää markkinointiviestintästrategioissaan. Tuotesijoittelun poikkeava luonne markkinointiviestintävälineenä tuotti kysymyksen miten tuotesijoittelua voitaisiin hyödyntää yhteistyössä muiden markkinointiviestintäkeinojen kanssa. Tätä varten tutkimuksessa tuotesijoittelu yhdistettiin integroidun markkinointiviestinnän (IMC) viitekehykseen. IMC-konsepti syntyi markkinointiviestinnässä vastaamaan samaan tarpeeseen kuin tuotesijoittelukin: pirstaloitunut mediakenttä ja yksittäiset kohderyhmät vaativat kehittyneempää ja yhtenäisempää markkinointiviestinnän suunnittelua ja toteutusta. Tutkimuksen johtopäätöksenä tuotesijoittelu todettiin käyttökelpoiseksi markkinointiviestintäkeinoksi mikäli viestinnän tavoitteena on muu kuin tuotteen myyntiin suorasti vaikuttaminen. Tuotesijoittelu on sen sijaan erittäin tehokas tuotetietoisuuden lisäämisessä, erityisesti tunnistamisen kohdalla. Tuotesijoittelu voi myös tuottaa suoran ostotarpeen mutta tällöin viestin vastaanottajalla täytyy olla vallitseva tarve kyseisen tuoteryhmän osalta ennen altistumista ko. markkinointiviestille. Tuotesijoittelu voidaan sisällyttää IMC-suunnitteluprosessiin markkinointiviestintästrategian kiinteänä osana. Integraatio markkinointiviestinnässä siten, että tuotesijoittelua tuettaisiin muilla viestintäkeinoilla yhtenäisen kampanjan kehittämiseksi on kuitenkin paljon ennakoitua harvinaisempaa, johtuen ehkä eniten tuotesijoittelun poikkeuksellisesta luonteesta ja kyseisen viestintämuodon vaikeasta hallittavuudesta markkinoijan taholta. Tutkimus toteutettiin normatiivisena case-tutkimuksena pääasiassa sekundäärisiä tietolähteitä hyödyntäen. Case-tutkimuksia varten kerättiin primääristä tietoa kyselylomakkeella kahdesta tuotesijoittelua käyttävästä kansainvälisestä yhtiöstä, jonka lisäksi myös sekundäärisiä tietolähteitä hyödynnettiin case-osan tiedonkeruussa.

A Mediated Presence : Uncovering Nietzsche in Art History from its Foundations to Contemporary Anglo-American Curricula

La pensée de Nietzsche a joué un rôle déterminant et récurrent dans les discours et les débats qui ont formé et continuent de façonner le domaine de l’histoire de l’art, mais aucune analyse systématique de cette question n’a encore vu le jour. L’influence de Nietzsche a été médiée par divers interlocuteurs, historiens de l’art et philosophes, qui ont encadré ces discussions, en utilisant les écrits du philosophe comme toile de fond de leurs propres idées. Ce mémoire souhaite démontrer que l’impact de Nietzsche dans le champ de l’histoire de l’art existe mais qu’il fut toujours immergé ou éclipsé, particulièrement dans le contexte anglo-américain, l’emphase étant placée sur les médiateurs de ses idées en n’avouant que très peu d’engagement direct avec son œuvre. En conséquence, son importance généalogique pour certains fondateurs de la discipline reste méconnue; sa présence réellement féconde se traduit plutôt comme une absence ou une présence masquée. En vue de démontrer ce propos, nous regardons donc le contexte nietzschéen qui travaille les écrits de certains historiens de l’art, comme Jacob Burckhardt et Aby Warburg, ou des philosophes et d’écrivains ayant marqué la discipline de l’histoire de l’art (plus particulièrement dans le cadre de l’influence de la « French Theory » sur l’histoire de l’art anglo-américaine depuis la fin des années 1970) : Martin Heidegger, Michel Foucault, Jacques Derrida, Gilles Deleuze et Georges Bataille. Nous examinons certaines voies par lesquelles ses idées ont acquis une pertinence pour l’histoire de l’art avant de proposer les raisons potentielles de leur occlusion ultérieure. Nous étudions donc l’évolution des discours multiples de l’histoire comme domaine d’étude afin de situer la contribution du philosophe et de cerner où et comment ses réflexions ont croisé celles des historiens de l’art qui ont soit élargi ou redéfini les méthodes et les structures d’analyse de leur discipline. Ensuite nous regardons « l’art » de Nietzsche en le comparant avec « l’art de l’histoire de l’art » (Preziosi 2009) afin d’évaluer si ces deux expressions peuvent se rejoindre ou s’il y a fondamentalement une incompatibilité entre les deux, laquelle pourrait justifier ou éclairer la distance entre la pensée nietzschéenne sur l’art et la discipline de l’histoire de l’art telle qu’elle s’institutionnalise au moment où le philosophe rédige son œuvre.

Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications

The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which brings the HPA to operate at large back-off power at the expense of power efficiency. Consequently, high power devices are fundamental in HPAs for high linearity and efficiency. Recent development in wide bandgap power devices, in particular AlGaN/GaN HEMT, has offered higher power level with superior linearity-efficiency trade-off in microwaves communication. For cost-effective HPA design to production cycle, rigorous computer aided design (CAD) AlGaN/GaN HEMT models are essential to reflect real response with increasing power level and channel temperature. Therefore, large-size AlGaN/GaN HEMT large-signal electrothermal modeling procedure is proposed. The HEMT structure analysis, characterization, data processing, model extraction and model implementation phases have been covered in this thesis including trapping and self-heating dispersion accounting for nonlinear drain current collapse. The small-signal model is extracted using the 22-element modeling procedure developed in our department. The intrinsic large-signal model is deeply investigated in conjunction with linearity prediction. The accuracy of the nonlinear drain current has been enhanced through several issues such as trapping and self-heating characterization. Also, the HEMT structure thermal profile has been investigated and corresponding thermal resistance has been extracted through thermal simulation and chuck-controlled temperature pulsed I(V) and static DC measurements. Higher-order equivalent thermal model is extracted and implemented in the HEMT large-signal model to accurately estimate instantaneous channel temperature. Moreover, trapping and self-heating transients has been characterized through transient measurements. The obtained time constants are represented by equivalent sub-circuits and integrated in the nonlinear drain current implementation to account for complex communication signals dynamic prediction. The obtained verification of this table-based large-size large-signal electrothermal model implementation has illustrated high accuracy in terms of output power, gain, efficiency and nonlinearity prediction with respect to standard large-signal test signals.

Interference and communications among active network applications

This paper focuses on active networks applications and in particular on the possible interactions among these applications. Active networking is a very promising research field which has been developed recently, and which poses several interesting challenges to network designers. A number of proposals for e±cient active network architectures are already to be found in the literature. However, how two or more active network applications may interact has not being investigated so far. In this work, we consider a number of applications that have been designed to exploit the main features of active networks and we discuss what are the main benefits that these applications may derive from them. Then, we introduce some forms of interaction including interference and communications among applications, and identify the components of an active network architecture that are needed to support these forms of interaction. We conclude by presenting a brief example of an active network application exploiting the concept of interaction.

Gap junction-mediated spontaneous Ca(2+) waves in differentiated cholinergic SN56 cells

Neuronal gap junctions are receiving increasing attention as a physiological means of intercellular communication, yet our understanding of them is poorly developed when compared to synaptic communication. Using microfluorimetry, we demonstrate that differentiation of SN56 cells (hybridoma cells derived from murine septal neurones) leads to the spontaneous generation of Ca(2+) waves. These waves were unaffected by tetrodotoxin (1microM), but blocked by removal of extracellular Ca(2+), or addition of non-specific Ca(2+) channel inhibitors (Cd(2+) (0.1mM) or Ni(2+) (1mM)). Combined application of antagonists of NMDA receptors (AP5; 100microM), AMPA/kainate receptors (NBQX; 20microM), nicotinic AChR receptors (hexamethonium; 100microM) or inotropic purinoceptors (brilliant blue; 100nM) was also without effect. However, Ca(2+) waves were fully prevented by carbenoxolone (200microM), halothane (3mM) or niflumic acid (100microM), three structurally diverse inhibitors of gap junctions, and mRNA for connexin 36 was detected by PCR. Whole-cell patch-clamp recordings revealed spontaneous inward currents in voltage-clamped cells which we inhibited by Cd(2+), Ni(2+) or niflumic acid. Our data suggest that differentiated SN56 cells generated spontaneous Ca(2+) waves which are propagated by intercellular gap junctions. We propose that this system can be exploited conveniently for the development of neuronal gap junction modulators.

Nicked-site substrates for a serine recombinase reveal enzyme–DNA communications and an essential tethering role of covalent enzyme–DNA linkages

To analyse the mechanism and kinetics of DNA strand cleavages catalysed by the serine recombinase Tn3 resolvase, we made modified recombination sites with a single-strand nick in one of the two DNA strands. Resolvase acting on these sites cleaves the intact strand very rapidly, giving an abnormal half-site product which accumulates. We propose that these reactions mimic second-strand cleavage of an unmodified site. Cleavage occurs in a synapse of two sites, held together by a resolvase tetramer; cleavage at one site stimulates cleavage at the partner site. After cleavage of a nicked-site substrate, the half-site that is not covalently linked to a resolvase subunit dissociates rapidly from the synapse, destabilizing the entire complex. The covalent resolvase–DNA linkages in the natural reaction intermediate thus perform an essential DNA-tethering function. Chemical modifications of a nicked-site substrate at the positions of the scissile phosphodiesters result in abolition or inhibition of resolvase-mediated cleavage and effects on resolvase binding and synapsis, providing insight into the serine recombinase catalytic mechanism and how resolvase interacts with the substrate DNA.

Computer-aided Structure Elucidation of Neolignans

This paper describes a new module of the expert system SISTEMAT used for the prediction of the skeletons of neolignans by (13)C NMR, (1)H NMR and botanical data obtained from the literature. SISTEMAT is composed of MACRONO, SISCONST, C13MACH, H1MACH and SISOCBOT programs, each analyzing data of the neolignan in question to predict the carbon skeleton of the compound. From these results, the global probability is computed and the most probable skeleton predicted. SISTEMAT predicted the skeletons of 75% of the 20 neolignans tested, in a rapid and simple procedure demonstrating its advantage for the structural elucidation of new compounds.

Analyzing glycerol-mediated protein oligomerization by electrospray ionization mass spectrometry

Glycerol is widely used as protein stabilizer, in both local and commercial preparations, so it has become necessary to develop methods for mass spectrometric analysis of protein preparations in the presence of glycerol. However, this stabilizing agent may cause signal suppression when present in high concentrations, and is also known to induce protein supercharging even at low concentrations. This work reports the,use of electrospray ionization (ESI) mass spectrometry to characterize glycerol-mediated protein oligomerization. this phenomenon seems to involve the formation of strong non-covalent interactions between protein and glycerol involving close contact between the monomers, leading to formation of protein oligomers adducted with glycerol molecules under the characteristic analytical conditions of the ESI interface. At high orders of oligomerization a lower number of glycerol molecules is required to maintain the high oligomeric states than for the dimers and trimers, and it is possible that for the higher oligomers the monomers become so close to one another that non-covalent bonds between the side chains of the amino acid residues in the proteins may be established. Copyright (C) 2005 John Wiley & Sons, Ltd.

Polyol-mediated synthesis of ultrafine tin oxide nanoparticles for reversible Li-ion storage

A simple, cheap and versatile, polyol-mediated fabrication method has been extended to the synthesis of tin oxide nanoparticles on a large scale. Ultrafine SnO2 nanoparticles with crystallite sizes of less than 5 nm were realized by refluxing SnCl2 . 2H(2)O in ethylene glycol at 195 degrees C for 4 h under vigorous stirring in air. The as-prepared SnO2 nanoparticles exhibited enhanced Li-ion storage capability and cyclability, demonstrating a specific capacity of 400 mAh g(-1) beyond 100 cycles. (c) 2006 Elsevier B.V. All rights reserved.

An attack signature model to computer security intrusion detection

Internal and external computer network attacks or security threats occur according to standards and follow a set of subsequent steps, allowing to establish profiles or patterns. This well-known behavior is the basis of signature analysis intrusion detection systems. This work presents a new attack signature model to be applied on network-based intrusion detection systems engines. The AISF (ACME! Intrusion Signature Format) model is built upon XML technology and works on intrusion signatures handling and analysis, from storage to manipulation. Using this new model, the process of storing and analyzing information about intrusion signatures for further use by an IDS become a less difficult and standardized process.

A study on human error in the interaction with the computer systems

The term human factor is used by professionals of various fields meant for understanding the behavior of human beings at work. The human being, while developing a cooperative activity with a computer system, is subject to cause an undesirable situation in his/her task. This paper starts from the principle that human errors may be considered as a cause or factor contributing to a series of accidents and incidents in many diversified fields in which human beings interact with automated systems. We propose a simulator of performance in error with potentiality to assist the Human Computer Interaction (HCI) project manager in the construction of the critical systems. © 2011 Springer-Verlag.