A zero-delay sequential scheme for lossy coding of individual sequences

We consider adaptive sequential lossy coding of bounded individual sequences when the performance is measured by the sequentially accumulated mean squared distortion. Theencoder and the decoder are connected via a noiseless channel of capacity $R$ and both are assumed to have zero delay. No probabilistic assumptions are made on how the sequence to be encoded is generated. For any bounded sequence of length $n$, the distortion redundancy is defined as the normalized cumulative distortion of the sequential scheme minus the normalized cumulative distortion of the best scalarquantizer of rate $R$ which is matched to this particular sequence. We demonstrate the existence of a zero-delay sequential scheme which uses common randomization in the encoder and the decoder such that the normalized maximum distortion redundancy converges to zero at a rate $n^{-1/5}\log n$ as the length of the encoded sequence $n$ increases without bound.

Sistemas de Tratamento e Disposição dos Resíduos Sólidos Compact Power & Aterro Sanitário

Na actual monografia intitulada “Sistemas de Tratamento e Disposição dos Resíduos Sólidos” adoptar-se-á as teorias clássicas de solos, para representar os resíduos sólidos urbanos. No que diz ao tratamento e disposição, diversos métodos e técnicas vão ser apresentados. Assim esta pesquisa tem como objectivo principal avaliar o Aterro Sanitário proposto para Santiago, 1999 e a tecnologia do Compact Power (pirólise/gasificação). Os dados dos resíduos sólidos ficaram restringidos aos resíduos urbanos, encontrando-se uma grande heterogeneidade e constantes questionamentos em diversas bibliografias. Analisa-se os elementos base para o dimensionamento do Aterro Sanitário abrangendo um estudo mais aprofundado sobre a estabilização dos taludes. Quanto ao Compact Power, far-se-á a apresentação da planta que incluiu duas linhas, uma para o resíduo misturado e o outro para resíduos separados, uma planta de compostagem e uma planta de conversão térmica avançada (empregando os processos de pirólises, gaseificação e oxidação a alta temperatura). Na compilação deste documento, encontra-se uma análise SWOT, com o intuito de melhor analisar as referidas tecnologias apresentadas.

On the structural difference between the evolutionary approach of Young and that of Kandori, Mailath and Rob

We provide robust examples of symmetric two-player coordination games in normal form that reveal that equilibrium selection bythe evolutionary model of Young (1993) is essentially different from equilibrium selection by the evolutionary model of Kandori, Mailath and Rob (1993).

TRENDS IN HOSPITAL MANAGEMENT OF ACUTE MYOCARDIAL INFARCTION IN SWITZERLAND, 1998 TO 2008 THE REGION MAKES THE DIFFERENCE: DISPARITIES IN MANAGEMENT OF ACUTE MYOCARDIAL INFARCTION WITHIN SWITZERLAND

The aim of this master's thesis was to assess the ten- year trends and regional differences in management and outcome of acute myocardial infarction (AMI) within Switzerland. The thesis is composed of two articles. First, in the article "Trends in hospital management of acute myocardial infarction in Switzerland, 1998 to 2008" over 102,700 cases of AMI with corresponding management and revascularization procedures were assessed. The results showed a considerable increase in the numbers of hospital discharges for AMI, namely due to the increase of between- hospital transfers. Rates of intensive care unit admissions remained stable. All types of revascularization procedures showed an increase. In particular, overall stenting rates increased with drug-eluting stents partly replacing bare stents. Second, in the article "The region makes the difference: disparities in management of acute myocardial infarction within Switzerland" around 25,600 cases of AMI with corresponding management were assessed for the period of 2007-2008 and according to seven Swiss regions. As reported by our results, considerable regional differences in AMI management were stated within Switzerland. Although each region showed different trends regarding revascularization interventions, Leman and Ticino contrast significantly by presenting the minimum and maximum rates in almost all assessed parameters. As a consequence these two regions differ the most from the Swiss average. The impact of the changes in trends and the regional differences in AMI management on Swiss patient's outcome and economics remains to be assessed. Purpose: To assess ten-year trends in management and outcome of acute myocardial infarction (AMI) in Switzerland. Methods: Swiss hospital discharge database for the 1998 to 2008 period. AMI was defined as a primary discharge diagnosis code I21 according to the CIM-10 classification of the World Health Organization. Management and revascularization procedures were assessed. Results: Overall, 102,729 hospital discharges with a diagnosis of AMI were analyzed. The number of hospital discharges increased almost three-fold from 5530 in 1998 to 13,834 in 2008, namely due to a considerable increase in between-hospital transfers (1352 in 1998, 6494 in 2008). Relative to all hospital discharges, Intensive Care Unit admission rate was 38.0% in 1998 and remained stable (36.2%) in 2008 (p for trend=0.25). Percutaneous revascularization rates increased from 6.0% to 39.9% (p for trend<0.001). Non-drug-eluting stent use increased from 1.3% to 16.6% (p for trend<0.05). Drug eluting stents appeared in 2004 and increased to 23.5% of hospital discharges in 2008 (p for trend=0.07). Coronary artery bypass graft increased from 1.0% to 3.0% (p for trend<0.001). Circulatory assistance increased from 0.2% to 1.7% (p for trend<0.001). Thrombolysis showed no significant changes, from 0.5% to 1.9% (p for trend=0.64). Most of these trends were confirmed after multivariate adjustment. Conclusion: Between 1998 and 2008 the number of hospital discharges for AMI increased considerably in Switzerland, namely due to between-hospital transfers. Overall stenting rates increased, drug-eluting stents partly replacing bare stents. The impact of these changes on outcome and economics remains to be assessed.

Difference in distribution of microtubule-associated proteins 5a and 5b during the development of cerebral cortex and corpus callosum in cats: dependence on phosphorylation.

MAP5, a microtubule-associated protein characteristic of differentiating neurons, was studied in the developing visual cortex and corpus callosum of the cat. In juvenile cortical tissue, during the first month after birth, MAP5 is present as a protein doublet of molecular weights of 320 and 300 kDa, defined as MAP5a and MAP5b, respectively. MAP5a is the phosphorylated form. MAP5a decreases two weeks after birth and is no longer detectable at the beginning of the second postnatal month; MAP5b also decreases after the second postnatal week but more slowly and it is still present in the adult. In the corpus callosum only MAP5a is present between birth and the end of the first postnatal month. Afterwards only MAP5b is present but decreases in concentration more than 3-fold towards adulthood. Our immunocytochemical studies show MAP5 in somata, dendrites and axonal processes of cortical neurons. In adult tissue it is very prominent in pyramidal cells of layer V. In the corpus callosum MAP5 is present in axons at all ages. There is strong evidence that MAP5a is located in axons while MAP5b seems restricted to somata and dendrites until P28, but is found in callosal axons from P39 onwards. Biochemical experiments indicate that the state of phosphorylation of MAP5 influences its association with structural components. After high speed centrifugation of early postnatal brain tissue, MAP5a remains with pellet fractions while most MAP5b is soluble. In conclusion, phosphorylation of MAP5 may regulate (1) its intracellular distribution within axons and dendrites, and (2) its ability to interact with other subcellular components.

Batch effect confounding leads to strong bias in performance estimates obtained by cross-validation.

BACKGROUND: With the large amount of biological data that is currently publicly available, many investigators combine multiple data sets to increase the sample size and potentially also the power of their analyses. However, technical differences ("batch effects") as well as differences in sample composition between the data sets may significantly affect the ability to draw generalizable conclusions from such studies. FOCUS: The current study focuses on the construction of classifiers, and the use of cross-validation to estimate their performance. In particular, we investigate the impact of batch effects and differences in sample composition between batches on the accuracy of the classification performance estimate obtained via cross-validation. The focus on estimation bias is a main difference compared to previous studies, which have mostly focused on the predictive performance and how it relates to the presence of batch effects. DATA: We work on simulated data sets. To have realistic intensity distributions, we use real gene expression data as the basis for our simulation. Random samples from this expression matrix are selected and assigned to group 1 (e.g., 'control') or group 2 (e.g., 'treated'). We introduce batch effects and select some features to be differentially expressed between the two groups. We consider several scenarios for our study, most importantly different levels of confounding between groups and batch effects. METHODS: We focus on well-known classifiers: logistic regression, Support Vector Machines (SVM), k-nearest neighbors (kNN) and Random Forests (RF). Feature selection is performed with the Wilcoxon test or the lasso. Parameter tuning and feature selection, as well as the estimation of the prediction performance of each classifier, is performed within a nested cross-validation scheme. The estimated classification performance is then compared to what is obtained when applying the classifier to independent data.

The Flag, Lincoln's Gettysburg Address, the Constitution of the State of Iowa, the Declaration of Independence, the "Mayflower" Compact, the Constitution of the United States : reprint from the Iowa Official Register, 1951-1952, 1958.

Reprints from the Iowa Official Register, 1951-1952 of The Flag, Lincoln's Gettysburg Address, the Constitution of the State of Iowa, the Declaration of Independence, the "Mayflower" Compact and the Constitution of the United States.

A physical frequency-dependent compact model for RF integrated inductors

A frequency-dependent compact model for inductors in high ohmic substrates, which is based on an energy point-of-view, is developed. This approach enables the description of the most important coupling phenomena that take place inside the device. Magnetically induced losses are quite accurately calculated and coupling between electric and magnetic fields is given by means of a delay constant. The later coupling phenomenon provides a modified procedure for the computation of the fringing capacitance value, when the self-resonance frequency of the inductor is used as a fitting parameter. The model takes into account the width of every metal strip and the pitch between strips. This enables the description of optimized layout inductors. Data from experiments and electromagnetic simulators are presented to test the accuracy of the model.

Dynamic compact thermal models with multiple power sources: application to an ultrathin chip stacking technology

Whereas numerical modeling using finite-element methods (FEM) can provide transient temperature distribution in the component with enough accuracy, it is of the most importance the development of compact dynamic thermal models that can be used for electrothermal simulation. While in most cases single power sources are considered, here we focus on the simultaneous presence of multiple sources. The thermal model will be in the form of a thermal impedance matrix containing the thermal impedance transfer functions between two arbitrary ports. Eachindividual transfer function element ( ) is obtained from the analysis of the thermal temperature transient at node ¿ ¿ after a power step at node ¿ .¿ Different options for multiexponential transient analysis are detailed and compared. Among the options explored, small thermal models can be obtained by constrained nonlinear least squares (NLSQ) methods if the order is selected properly using validation signals. The methods are applied to the extraction of dynamic compact thermal models for a new ultrathin chip stack technology (UTCS).

Response of irrigated wheat cultivars to different nitrogen rates and sources

High wheat yields require good N fertilization management. The objective of this study was to evaluate the effects of different N applications at sowing using Entec (N source with nitrification inhibitor) and urea (traditional N source) at covering, on four wheat cultivars. The experiment was conducted in a randomized block design in a factorial scheme, with four replications, at the Experimental Station of the Faculdade de Engenharia de Ilha Solteira - UNESP, on a dystrophic, epi-eutrophic alic Red Latosol with loamy texture, formerly under savannah vegetation. Four N rates (0, 60, 120, and 180 kg ha-1) were tested, applied at sowing in the case of Entec and top-dressed 40 days after plant emergence in the case of urea, and the four wheat cultivars E 21, E 22, E 42, and IAC 370. The yield of the wheat cultivars E 21 and E 42 was highest. Plant height and lodging index of cultivar E 22 were greatest, with consequently lowest grain yield. There was no significant difference between Entec (applied at sowing) and urea (top-dressed) in terms of grain yield and yield components. Nevertheless, urea resulted in a higher N leaf content, and Entec in a larger number of undeveloped spikelets. High nitrogen rates influenced the hectoliter mass negatively, affecting wheat grain quality. Grain yield increased under N rates of up to 82 kg ha-1 N, through Entec applied at sowing or top-dressed urea.