Stability of hydrotalcites formed from Bayer refinery environmental control processes

Bauxite refinery residues (red mud) are derived from the Bayer process by the digestion of crushed bauxite in concentrated sodium hydroxide at elevated temperatures and pressures. This slurry residue, if untreated, is unsuitable for discharge directly into the environment and is usually stored in tailing dams. The liquid portion has the potential for discharge, but requires pre-treatment before this can occur. The seawater neutralisation treatment facilitates a significant reduction in pH and dissolved metal concentrations, through the precipitation of hydrotalcite-like compounds and some other Mg, Ca, and Al hydroxide and carbonate minerals. The hydrotalcite-like compounds, precipitated during seawater neutralisation, also remove a range of transition metals, oxy-anions and other anionic species through a combination of intercalation and adsorption reactions: smaller anions are intercalated into the hydrotalcite matrix, while larger molecules are adsorbed on the particle surfaces. A phenomenon known as ‘reversion’ can occur if the seawater neutralisation process is not properly controlled. Reversion causes an increase in the pH and dissolved impurity levels of the neutralised effluent, rendering it unsuitable for discharge. It is believed that slow dissolution of components of the red mud residue and compounds formed during the neutralisation process are responsible for reversion. This investigation looked at characterising natural hydrotalcite (Mg6Al2(OH)16(CO3)∙4H2O) and ‘Bayer’ hydrotalcite (synthesised using the seawater neutralisation process) using a variety of techniques including X-ray diffraction, infrared and Raman spectroscopy, and thermogravimetric analysis. This investigation showed that Bayer hydrotalcite is comprised of a mixture of 3:1 and 4:1 hydrotalcite structures and exhibited similar chemical characteristic to the 4:1 synthetic hydrotalcite. Hydrotalcite formed from the seawater neutralisation of Bauxite refinery residues has been found not to cause reversion. Other components in red mud were investigated to determine the cause of reversion and this investigation found three components that contributed to reversion: 1) tricalcium aluminate, 2) hydrocalumite and 3) calcium hydroxide. Increasing the amount of magnesium in the neutralisation process has been found to be successful in reducing reversion.

Thermal stability of newberyite Mg(PO3OH)•3H2O – a cave mineral from Skipton lava tubes, Victoria, Australia.

The mineral newberyite Mg(PO3OH)•3H2O is a mineral that has been found in caves such as the Skipton Lava Tubes (SW of Ballarat, Victoria, Australia), Moorba cave, Jurien Bay, Western Australia, and in the Petrogale Cave (Madura , Eucla, Western Australia). Because these minerals contain water, the minerals lend themselves to thermal analysis. The mineral newberyite is found to decompose at 145°C with a water loss of 31.96%, a result which is very close to the theoretical value. The result shows that the mineral is not stable in caves where the temperature exceeds this value. The implication of this result rests with the removal of kidney stones, which have the same composition as newberyite. Point heating focussing on the kidney stone results in the destruction of the kidney stone.

Thermal stability of stercorite H(NH4)Na(PO4)·4H2O – a cave mineral from Petrogale Cave, Madura, Eucla, Western Australia

Thermogravimetric analysis has been used to determine the thermal stability of the mineral stercorite H(NH4)Na(PO4)·4H2O. The mineral stercorite originated from the Petrogale Cave, Madura, Eucla, Western Australia. This cave is one of many caves in the Nullarbor Plain in the South of Western Australia. The mineral is formed by the reaction of bat guano chemicals on calcite substrates. Upon thermal treatment the mineral shows a strong decomposition at 191°C with loss of water and ammonia. Other mass loss steps are observed at 158, 317 and 477°C. Ion current curves indicate a gain of CO2 at higher temperature and are attributed to the thermal decomposition of calcite impurity.

Thermal stability of crandallite CaAl3(PO4)2(OH)5•(H2O) – a ‘cave’ mineral from the Jenolan Caves

Thermogravimetry combined with evolved gas mass spectrometry has been used to characterise the mineral crandallite CaAl3(PO4)2(OH)5•(H2O) and to ascertain the thermal stability of this ‘cave’ mineral. X-ray diffraction proves the presence of the mineral and identifies the products after thermal decomposition. The mineral crandallite is formed through the reaction of calcite with bat guano. Thermal analysis shows that the mineral starts to decompose through dehydration at low temperatures at around 139°C while dehydroxylation occurs over the temperature range 200 to 700°C with loss of OH units. The critical temperature for OH loss is around 416°C and above this temperature the mineral structure is altered. Some minor loss of carbonate impurity occurs at 788°C. This study shows the mineral is unstable above 139°C. This temperature is well above the temperature in caves, which have a maximum temperature of 15°C. A chemical reaction for the synthesis of crandallite is offered and the mechanism for the thermal decomposition is given.

Helping undergraduate students across disciplines and cultures actively engage and collaborate as equal members of a community of scholars : peer review within an e-learning environment

At the international level, the higher education sector is currently being subjected to increased calls for public accountability and the current move by the OECD to rank universities based on the quality of their teaching and learning outcomes. At the national level, Australian universities and their teaching staff face numerous challenges including financial restrictions, increasing student numbers and the reality of an increasingly diverse student population. The Australian higher education response to these competing policy and accreditation demands focuses on precise explicit systems and procedures which are inflexible and conservative and which ignore the fact that assessment is the single biggest influence on how students approach their learning. By seriously neglecting the quality of student learning outcomes, assessment tasks are often failing to engage students or reflect the tasks students will face in the world of practice. Innovative assessment design, which includes new paradigms of student engagement and learning and pedagogically based technologies have the capacity to provide some measure of relief from these internal and external tensions by significantly enhancing the learning experience for an increasingly time-poor population of students. That is, the assessment process has the ability to deliver program objectives and active learning through a knowledge transfer process which increases student participation and engagement. This social constructivist view highlights the importance of peer review in assisting students to participate and collaborate as equal members of a community of scholars with both their peers and academic staff members. As a result of increasing the student’s desire to learn, peer review leads to more confident, independent and reflective learners who also become more skilled at making independent judgements of their own and others' work. Within this context, in Case Study One of this project, a summative, peer-assessed, weekly, assessment task was introduced in the first “serious” accounting subject offered as part of an undergraduate degree. The positive outcomes achieved included: student failure rates declined 15%; tutorial participation increased fourfold; tutorial engagement increased six-fold; and there was a 100% student-based approval rating for the retention of the assessment task. However, in stark contrast to the positive student response, staff issues related to the loss of research time associated with the administration of the peer-review process threatened its survival. This paper contributes to the core conference topics of new trends and experiences in undergraduate assessment education and in terms of innovative, on-line, learning and teaching practices, by elaborating the Case Study Two “solution” generated to this dilemma. At the heart of the resolution is an e-Learning, peer-review process conducted in conjunction with the University of Melbourne which seeks to both create a virtual sense of belonging and to efficiently and effectively meet academic learning objectives with minimum staff involvement. In outlining the significant level of success achieved, student-based qualitative and quantitative data will be highlighted along with staff views in a comparative analysis of the advantages and disadvantages to both students and staff of the staff-led, peer review process versus its on-line counterpart.

Evaluation of an Australian solar community : implications for education and training

1.1 Background What is renewable energy education and training? A cursory exploration of the International Solar Energy Society website (www.ises.org) reveals numerous references to education and training, referring collectively to concepts of the transfer and exchange of information and good practices, awareness raising and skills development. The purposes of such education and training relate to changing policy, stimulating industry, improving quality control and promoting the wider use of renewable energy sources. The primary objective appears to be to accelerate a transition to a better world for everyone (ISEE), as the greater use of renewable energy is seen as key to climate recovery; world poverty alleviation; advances in energy security, access and equality; improved human and environmental health; and a stabilized society. The Solar Cities project – Habitats of Tomorrow – aims at promoting the greater use of renewable energy within the context of long term planning for sustainable urban development. The focus is on cities or communities as complete systems; each one a unique laboratory allowing for the study of urban sustainability within the context of a low carbon lifestyle. The purpose of this paper is to report on an evaluation of a Solar Community in Australia, focusing specifically on the implications (i) for our understandings and practices in renewable energy education and training and (ii) for sustainability outcomes. 1.2 Methodology The physical context is a residential Ecovillage (a Solar Community) in sub-tropical Queensland, Australia (latitude 28o south). An extensive Architectural and Landscape Code (A&LC) ‘premised on the interconnectedness of all things’ and embracing ‘both local and global concerns’ governs the design and construction of housing in the estate: all houses are constructed off-ground (i.e. on stumps or stilts) and incorporate a hybrid approach to the building envelope (mixed use of thermal mass and light-weight materials). Passive solar design, gas boosted solar water heaters and a minimum 1kWp photovoltaic system (grid connected) are all mandatory, whilst high energy use appliances such as air conditioners and clothes driers are not permitted. Eight families participated in an extended case study that encompassed both quantitative and qualitative approaches to better understand sustainable housing (perceived as a single complex technology) through its phases of design, construction and occupation. 1.3 Results The results revealed that the level of sustainability (i.e. the performance outcomes in terms of a low-carbon lifestyle) was impacted on by numerous ‘players’ in the supply chain, such as architects, engineers and subcontractors, the housing market, the developer, product manufacturers / suppliers / installers and regulators. Three key factors were complicit in the level of success: (i) systems thinking; (ii) informed decision making; and (iii) environmental ethics and business practices. 1.4 Discussion The experiences of these families bring into question our understandings and practices with regard to education and training. Whilst increasing and transferring knowledge and skills is essential, the results appear to indicate that there is a strong need for expanding our education efforts to incorporate foundational skills in complex systems and decision making processes, combined with an understanding of how our individual and collective values and beliefs impact on these systems and processes.

Place and Space: Community in the Internet Economy and What This Will Mean for Property

By 2020 Australia‟s National Digital Economy Strategy aims to increase household online participation and engage 12 per cent of all employees in teleworking arrangements. Achieving these goals is generally perceived as positive due to the reduced impact on the natural environment from less use of transport. However, this also will enable greater flexibility as to where people live and thus will impact upon the maintenance and formation of communities and on property use. This paper commences by clarifying what is Australia‟s internet economy before highlighting the impact of the internet on community formation and maintenance. The paper concludes by identifying what the achievement of these goals will mean for property use in the future.

Enhancing resilience in indigenous people: The integration of individual, family and community interventions

This paper describes a number of interventions being developed to address the emotional, social and behavioural problems experienced by Aboriginal people in Australia. These are: the We-Al-Li program to help people deal with the impact of transgenerational trauma; and the RAP Indigenous Parenting Program. It is argued that the emotional well being of indigenous people will be enhanced through the integration of interventions targeting the individual, family and community.

Community psychology : panic or panacea

The growing social upheaval and intensifying tensions in South Africa have by their very nature evoked concern and panic among mental health professionals. In an attempt to alleviate the concomittant anxiety and appear to be more responsive to the majority, many psychologists have boarded the community psychology wagon to cross the great divide between the comfortable consultancy room and the masses. In assessing whether community psychology is the appropriate vehicle for crossing the rubicon, we will start with an overview of different models of community psychology focusing on their different conceptualizations of mental illness and how each model sees the role of the psychologist in the context of psycho-social change.

Community participation in the development of digital radio : the Australian experience

The participation of the community broadcasting sector in the development of digital radio provides a potentially valuable opportunity for non-market, end user-driven experimentation in the development of these new services in Australia. However this development path is constrained by various factors, some of which are specific to the community broadcasting sector and others that are generic to the broader media and communications policy, industrial and technological context. This paper filters recent developments in digital radio policy and implementation through the perspectives of community radio stakeholders, obtained through interviews, to describe and analyse these constraints. The early stage of digital community radio presented here is intended as a baseline for tracking the development of the sector as digital radio broadcasting develops. We also draw upon insights from scholarly debates about citizens media and participatory culture to identify and discuss two sets of opportunities for social benefit that are enabled by the inclusion of community radio in digital radio service development. The first arises from community broadcasting’s involvement in the propagation of the multi-literacies that drive new digital economies, not only through formal and informal multi- and trans-media training, but also in the ‘co-creative’ forms of collaborative and participatory media production that are fostered in the sector. The second arises from the fact that community radio is uniquely placed — indeed charged with the responsibility — to facilitate social participation in the design and operation of media institutions themselves, not just their service outputs.

Teaching undergraduate students community nursing : using action research to increase engagement and learning

Nurses play a pivotal role in responding to the changing needs of community health care. Therefore, nursing education must be relevant, responsive, and evidence based. We report a case study of curriculum development in a community nursing unit embedded within an undergraduate nursing degree. We used action research to develop, deliver, evaluate, and redesign the curriculum. Feedback was obtained through self-reflection, expert opinion from community stakeholders, formal student evaluation, and critical review. Changes made, especially in curriculum delivery, led to improved learner focus and more clearly linked theory and practice. The redesigned unit improved performance, measured with the university's student evaluation of feedback instrument (increased from 0.3 to 0.5 points below to 0.1 to 0.5 points above faculty mean in all domains), and was well received by teaching staff. The process confirmed that improved pedagogy can increase student engagement with content and perception of a unit as relevant to future practice.

The impact of the GST on the community services sector in Queensland

The impact of the GST has on nonprofit organisations has been largely ignored in the compliance cost literature. Most studies to date, both in Australia and overseas, have focused exclusively on measuring the nature and extent of GST compliance costs of businesses in the for-profit sector (particularly the impact on small businesses). This paper examines the impact of The New Tax System, and in particular, the GST on Queensland community sector organisations. The results are extracted from a QCOSS report entitled “Taxing Goodwill: The Impact of GST on Community Services” released in October 2001.