Investigação da retração plástica e da fissuração da argamassa do concreto auto-adensável

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização do lodo de estação de tratamento de efluentes da indústria de injeção plástica como matéria-prima para indústria cerâmica

A indústria de injeção plástica é de fundamental importância para a economia nacional, pois é responsável pela produção de insumos primários para várias indústrias de eletroeletrônicos. Estas empresas geram efluentes procedentes das unidades de pintura por jateamento e aspersão. Este resíduo necessita de tratamento especial para sua separação, armazenagem e destino final. Este trabalho estuda uma forma alternativa de utilização deste resíduo na indústria de cerâmica vermelha, avaliando parâmetros que influenciam em propriedades importantes nos artefatos fabricados com argila vermelha como: densidade, porosidade e resistência à flexão, avaliados para misturas de 2%, 5% e 10% em peso de resíduo, em relação a argila utilizada, os resultados mostram que há influência deste material nas reações de estado sólido podendo haver melhora nas propriedades citadas.

Estudo da transformação da austenita retida em martensita induzida por deformação plástica em aços multifásicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alterações em Variáveis Agrometeorológicas pelo Uso de Estufa Plástica

O presente trabalho teve como objetivo verificar o efeito da cobertura plástica de polietileno de baixa densidade (PEBD) sobre a temperatura do ar, umidade relativa do ar, déficit de saturação e tensão de vapor d'água no ar. Pelos resultados encontrados neste trabalho as médias mensais de temperatura do ar no interior da estufa plástica foram superiores em 7,5%, a umidade relativa do ar em 7%, o déficit de saturação em 34% e a tensão atual de vapor d'água no ar em 4,7%, em relação aos valores determinados à campo. Observou-se maior efeito da cobertura plástica sobre as temperaturas máximas, as quais levaram as médias mensais a ficar entre 3,8 a 7,8 oC acima dos valores médios determinados no campo. Os valores médios mensais mínimos de temperatura e umidade relativa do ar entre a estufa e o campo apresentaram menor amplitude de variação que os valores máximos.

Avaliação do comportamento reológico na retração plástica e na fissuração de argamassas de concreto auto-adensável

This paper investigated the influence of the amount of superplasticizer and mineral adding - silica fume and basaltic filer - in plastic shrinkage and cracking of self-compacting concrete (SCC) mortars. Initially analysis was performed of the rheological behavior of cement paste and mortars phases of the compositions of SCC. Then the deformations of mortars were measured by the effect of shrinkage and evaluation of cracking. On plastic shrinkage and cracking, the composition with silica fume showed superior results, independent of wind and superplasticizer content, relative to the composition with addition of basalt filler. However, the composition with silica fume showed superior results only in the tests with imposed ventilation at vertical plastic deformation. The rheological behavior affected directly the plastic shrinkage and cracking at early ages, fact confirmed by the analysis of capillary pressures of mortars tested.

Estudo das propriedades mecânicas da madeira plástica

This work has in its outline the analysis of the mechanical properties of the composition of plastic residues, denominated “plastic wood”, aiming at establishing technical parameters for application of this material in substitution to the natural wood. Plastic-Wood is basically, a combination of several kind of plastic, previously selected, washed, dried and without metallic particles, which are agglomerated, extruded or introduced into a mold. The manufacturer can choose different formats and colors. During this monograph it can be observed the use of several kind of plastic, their mechanical properties and the plastic-wood production process. Also are presented features and applications of natural wood, in order to better compare their uses in several applications

Estudo sobre eficiência energética em uma indústria de injeção plástica

The reason of this work is perform a study about using of electrical energy to identify the opportunities through rational use of electrical energy. For that it was necessary perform an analysis of hired energy against consumption. Based in a guide of energy analysis were found the main consumers and verified the main problems, which generate excessive use of electrical energy in a plastic injection factory. It was also analyzed the painting line because there are some thermal equipment that use electrical energy. Based on the data obtained will be proposed ways to reduce the needless consumption and energy use of rationally and efficiently, in addition to re-evaluate the contracted demand based on the new policy of supplying and charging.It were also proposed thermodynamics solutions to reduce the energy consumed in thermal process

Conceptos actuales en la preparación de la cavidad apical para obturación retrógrada en cirugía perirradicular

The endodontic surgery is indicated in cases of failure and/or impossibility of conventional endodontic treatment. Among the existent modalities in the endodontic surgery, the retrograde filling consists on preparation of apical cavity and filling with a retrofilling material. The technical-scientific progress in Endodontics become possible the use of retrotips activated with ultrasonic for retrocavities preparation with appropriate extension and following the long axis of the root. The aim of the study was to present the current resources in the preparation of the retrograde cavity in endodontic surgery, detaching their advantages in comparison with the use of conventional preparation with burns. A review of the literature will be presented, considering the use of ultrasound and laser for retrograde preparation, seeking the current resources that provide better apical preparation, resulting in better prognostic of the endodontic surgery (AU)

Cirugía endodóntica con obturación simultánea del conducto radicular: caso atípico

The apical surgery with simultaneous root filling consists in the elimination of the local etiologic factors concomitant with the shaping and obturation of the root canal system. This technique is indicated when there is no possibility of obturating the root canal by conventional methods. Some adverse factors may difficult the clinical procedures, such as the radiographic interpretation. Periapical radiographs must not be used as the main diagnostic resource due to their inherent disadvantages, such as distortion and superimposition with other anatomical structures. The aim of this clinical case report is to show the limitations of radiographic examination in an apical surgery in which a root perforation was not visible in the radiographic image, as well as the gutta-percha was not related to its real clinical location.

Plástica gengival associada à laminados cerâmicos para resolução estética

Sometimes we face clinical situations in which the lack of harmony in the smile is caused by a major exhibition of the gingival tissue. In these cases the professional should be able to perform a detailed analysis of the static and dynamic components of the smile, in search of a satisfactory planning and treatment which may include different dental specialties. For these situations, the association of periodontics/prosthesis is a viable alternative that has been used positively in search of an aesthetic and functional condition that benefits the patient, without leaving aside the preservation of periodontal tissues and of the remaining structure of the tooth. Thus, the aim of this study was to describe a case in which the association between these two areas was proposed to correct gummy smile and dental vestibularization. Clinical results and the satisfaction of the patient indicate that this multidisciplinary treatment combining periodontal and prosthetic techniques is favorable to positive results in cases of compromised smile aesthetics due to excessive gum tissue.

A busca de linguagens contemporâneas em artes: reflexões na universidade a partir de Centro de Pesquisa Plástica

This work is about the extension project “Plastic Research Centre”, developed at Unesp (Bauru/São Paulo/Brasil) by the author along with the students of Artistic Education (Plastic Arts). Aiming to encourage the students on supports and alternative techniques, the Audiovisual and Visual Arts Study Group - GRAVA was created as a place for reflexion and creation. The group has been seeking a personal language, improving it as the means to communicate its interpretation of the world are investigated, being it in the urban space or in cultural and virtual centres. By extending the university knowledge to the local community, it is intended to motivate the student’s research along with the professoriate and promote the creation process and artistic works focusing the group’s view on the context it is inserted.

Fayga Ostrower: estudos sobre a pesquisa plástica e teórica nos processos criativos

The way we look express our soul, so there is no way to disregard the presence of intuitive processes in the creation of any work, like say Fayga Ostrower. Based on the theories of the artist, intends to investigate how their own texts read his plastic production, heavily influenced by German Expressionism. The concernment of the research is in the approach how their publications favor the understanding of artistic making as a moment against the intuitive and the fullness of the original creation and true to the thought of the artist.

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found