Mometasone and desloratadine additive effect on eosinophil survival and cytokine secretion from epithelial cells

Although antihistamines and topical corticosteroids are used in combination to treat allergic rhinitis, their additive effect has not been yet demonstrated. The aim was investigate the antiinflammatory additive effect of mometasone and desloratadine on cytokine and sICAM-1 secretion by epithelial cells, and on eosinophil survival stimulated by human epithelial cells secretions from nasal mucosa and polyps. Methods Epithelial cells obtained from nasal mucosa or polyps were stimulated with 10% fetal bovine serum in presence of mometasone (10-11M-10-5M) with/without desloratadine (10-5M). Cytokine and sICAM-1 concentrations in supernatants were measured by ELISA. Peripheral blood eosinophils were incubated during 4 days with epithelial cell secretions with (10-11M-10-5M) and/or desloratadine (10-5M) and survival assessed by Trypan blue. Results are expressed as percentage (mean ± SEM) compared to control. Results Fetal bovine serum stimulated IL-6, IL-8, GM-CSF and sICAM-1 secretion. In mucosa and polyp epithelial cells, mometasone inhibited this induced secretion while desloratadine inhibited IL-6 and IL-8. The combination of 10-5M desloratadine and 10-9M mometasone reduced IL-6 secretion (48 ± 11%, p < 0.05) greater extent than mometasone alone (68 ± 10%) compared to control (100%). Epithelial cell secretions induced eosinophil survival from day 1 to 4, this effect being inhibited by mometasone. At day 4, the combination of mometasone (10-11M) and desloratadine (10-5M) provoked an increased inhibition of eosinophil survival induced by cell secretions (27 ± 5%, p < 0.01) than mometasone (44 ± 7%) or desloratadine (46 ± 7%) alone. Conclusions These results suggest that the combination of desloratadine and mometasone furoate have a greater antinflammatory effect in an in vitro model of eosinophil inflammation than those drugs administered alone.

Reelin regulates the development and synaptogenesis of the layer-specific entorhino-hippocampal connections

Here we examine the role of Reelin, an extracellular protein involved in neuronal migration, in the formation of hippocampal connections. Both at prenatal and postnatal stages, the general laminar and topographic distribution of entorhinal projections is preserved in the hippocampus of reeler mutant mice, in the absence of Reelin. However, developing and adult entorhinal afferents show severe alterations, including increased numbers of misrouted fibers and the formation of abnormal patches of termination from the medial and lateral entorhinal cortices. At perinatal stages, single entorhinal axons in reeler mice are grouped into thick bundles, and they have decreased axonal branching and decreased extension of axon collaterals. We also show that the number of entorhino-hippocampal synapses is lower in reeler mice than in control animals during development. Studies performed in mixed entorhino-hippocampal co-cultures combining slices from reeler and wild-type mice indicate that these abnormalities are caused by the lack of Reelin in the target hippocampus. These findings imply that Reelin fulfills a modulatory role during the formation of layer-specific and topographic connections in the hippocampus. They also suggest that Reelin promotes maturation of single fibers and synaptogenesis by entorhinal afferents.

Geographical determinants of the creation of manufacturing firms: The regions of Spain

La complexitat dels mecanismes que determinen l'entrada i la sortida de signatures augmenta quan diferències geogràfiques de l'estructura de producció, la capital humana i l'atur són considerades. Variacions interregionals en la tarifa de les noves de signatures dintre de cada activitat industrial persisteixen durant els períodes llargs de temps, una circumstància que indica que hi ha determinants no-conjunturals en la capacitat de regions per a crear nous projectes industrials. Aquest estudi està preocupat amb l'establiment d'influència variables geogràfiques sobre la fundació de nous establiments de la fabricació. Les indústries (NEIX la R 25) en les regions espanyoles (el BOIG 2) han estat preses com les unitats d'anàlisis per al període 1980-1992

Influence of ohmic heating on the flow field in thin-layer electrodeposition

In thin-layer electrodeposition the dissipated electrical energy leads to a substantial heating of the ion solution. We measured the resulting temperature field by means of an infrared camera. The properties of the temperature field correspond closely with the development of the concentration field. In particular, we find that the thermal gradients at the electrodes act similar to a weak additional driving force to the convection rolls driven by concentration gradients.

Fingerlike aggregates in thin-layer electrodeposition

Electrodeposition experiments conducted in a thin-layer horizontal cell containing a nonbinary aqueous electrolyte prepared with cupric sulfate and sodium sulfate gave rise to fingerlike deposits, a novel and unexpected growth mode in this context. Both the leading instability from which fingers emerge and some distinctive features of their steady evolution are interpreted in terms of a simple model based on the existing theory of fingering in fluids.

Production Flow Analysis - cases from manufacturing and service industry

Production flow analysis (PFA) is a well-established methodology used for transforming traditional functional layout into product-oriented layout. The method uses part routings to find natural clusters of workstations forming production cells able to complete parts and components swiftly with simplified material flow. Once implemented, the scheduling system is based on period batch control aiming to establish fixed planning, production and delivery cycles for the whole production unit. PFA is traditionally applied to job-shops with functional layouts, and after reorganization within groups lead times reduce, quality improves and motivation among personnel improves. Several papers have documented this, yet no research has studied its application to service operations management. This paper aims to show that PFA can well be applied not only to job-shop and assembly operations, but also to back-office and service processes with real cases. The cases clearly show that PFA reduces non-value adding operations, introduces flow by evening out bottlenecks and diminishes process variability, all of which contribute to efficient operations management.

Additive effects of ectoparasites over reproductive attempts in the long-lived Alpine swift

1. Parasitism is a non-negligible cost of reproduction in wild organisms, and hosts are selected to partition resources optimally between current and future reproduction. While parents can compensate for the cost of parasitism by increasing their current reproductive investment, such change in resource allocation is expected to carry-over costs on future reproduction. 2. Life history theory predicts that because long-lived organisms have a high residual reproductive value, they should be more reluctant to increase parental effort in response to parasites. Also, when rearing successive infested broods, the cost of parasitism can cumulate over the years and hence be exacerbated by past infestations. 3. We tested these two predictions in the alpine swift Apus melba, a long-lived colonial bird that is infested intensely by the nest-based blood sucking louse-fly Crataerina melbae. For this purpose, we manipulated ectoparasite load over 3 consecutive years and measured reproductive parameters in successive breeding attempts of adults assigned randomly to 'parasitized' and 'deparasitized' treatments. 4. In current reproduction, fathers of experimentally parasitized broods produced a similar number of offspring as fathers from the deparasitized treatment, but the rearing period was prolonged by 4 days. Fathers that were assigned to the parasitized treatment in year x produced significantly fewer fledglings the following year x + 1 than those of the deparasitized treatment. The number of young produced by fathers in year x + 1 was correlated negatively with the number of days they cared for their brood in the previous year x. We also found a significant interaction between treatments performed over 2 successive years, with fathers of parasitized broods suffering a larger fitness loss if in the past they had already cared for a parasitized brood rather than for a deparasitized one. Similar effects of parasitism, although partly non-significant (0.05 < P-values > 0.10), were found in mothers. 5. Altogether, our results show that parasites can modify resource allocation between current and future reproduction in long-lived hosts, and that the cost of parasitism can cumulate over the years. It emphasizes the fact that effects of parasites can depend on past infestations and become apparent in future reproduction only.

Polymer Additive Ductilad D1002 in a Bituminous Seal Coat, HR-2035, 1994

Seal coat and chip seal treatments are commonly used as an economical treatment to provide a new surface to an old asphalt roadway. To be successful, the aggregate or chips must be held in place on the roadway by the asphalt binder over a long period of time. It is common, over time, that the binder becomes aged and brittle and loses its ability to be flexible and hold the aggregate in place. Modifiers have been introduced to extend the life and adhesion characteristics of asphaltic binders.

Dense Concrete Layer as Top Course of Bridge Deck Construction, HR-502, 1990

The use of deicing salts in this part of the country is a necessity to remove ice from our bridges. The use of these salts has always been a problem since the chloride-ions penetrate the concrete and reach the steel and cause corrosion which eventually cause deterioration of both the steel and concrete. One method used to try to prevent this from happening was to apply a waterproof membrane to the concrete after it was placed. This method did help, but was not cost effective as the longevity of the membrane system was of relatively short duration. For this reason, this research project was initiated. After the original deck was placed a second layer of concrete about 1 1/2" thick was placed on top. Biennial evaluation of the decks included testing for delaminations and steel corrosion. Cores were also obtained for a chloride analysis. Testing and observations showed the two-layer bridge deck to be effective in preventing corrosion. Since the time this project was initiated, epoxy steel has been introduced and is a cost effective way to protect the steel from corrosion.

The Impact of Cooperation on R&D, Innovation andProductivity: an Analysis of Spanish Manufacturing and Services Firms

This paper investigates relationships between cooperation, R&D, innovation and productivity in Spanish firms. It uses a large sample of firm-level micro-data and applies an extended structural model that aims to explain the effects of cooperation on R&D investment, of R&D investment on output innovation, and of innovation on firms’ productivity levels. It also analyses the determinants of R&D cooperation. Firms’ technology level is taken into account in order to analyse the differences between high-tech and low-tech firms, both in the industrial and service sectors. The database used was the Technological Innovation Panel (PITEC) for the period 2004-2010. Empirical results show that firms which cooperate in innovative activities are more likely to invest in R&D in subsequent years. As expected, R&D investment has a positive impact on the probability of generating an innovation, in terms of both product and process, for manufacturing firms. Finally, innovation output has a positive impact on firms’ productivity, being greater in process innovations.

The Impact of Cooperation on R&D, Innovation and Productivity: an Analysis of Spanish Manufacturing and Services Firms

This paper investigates relationships between cooperation, R&D, innovation and productivity in Spanish firms. It uses a large sample of firm-level micro-data and applies an extended structural model that aims to explain the effects of cooperation on R&D investment, of R&D investment on output innovation, and of innovation on firms’ productivity levels. It also analyses the determinants of R&D cooperation. Firms’ technology level is taken into account in order to analyse the differences between high-tech and low-tech firms, both in the industrial and service sectors. The database used was the Technological Innovation Panel (PITEC) for the period 2004-2010. Empirical results show that firms which cooperate in innovative activities are more likely to invest in R&D in subsequent years. As expected, R&D investment has a positive impact on the probability of generating an innovation, in terms of both product and process, for manufacturing firms. Finally, innovation output has a positive impact on firms’ productivity, being greater in process innovations. Keywords: innovation sources; productivity; R&D Cooperation