Effect of fabrication conditions on I-V properties for ZnO varistor with high concentration additives by sol-gel technique

Polycrystalline nano-grain-boundary multi-doping ZnO-based nonlinear varistors with higher concentration additives have been fabricated by sol-gel and standard solid-state reaction method, of which the best sample has a very high threshold voltage of E-b = 3300 V/mm. The effect of sintering processes, sintering temperature and sintering time, and that of additive concentration of Bi2O3 on E-b of the samples are systematically investigated. The results show that the great merit of sol-gel method is its high threshold voltage obtained by a lower sintering temperature than the solid-state reaction method. The present work also shows that five phases including solid-state sintering, rich Bi liquid phase formation and ZnO as well as other additive dissolution, ZnO grain growth, the secondary phase sufficient formation and evolution have been experienced at different sintering temperatures. The hole type defect and nonhomogeneity of the microstructure will lead to the decrease of threshold voltage, i.e., the grain size and the homogeneity of the material will be important factors and directly affect the characteristic of the varistor. The sintering characteristic and the influence of Bi2O3 content on the threshold voltage are also discussed. (c) 2004 Elsevier B.V. All rights reserved.

A New Criterion Number for the Boundary Conditions at the Solid/Liquid Interface in Nanoscale

A simple, but important three-atom model was proposed at the solid/liquid interface, leading to a new criterion number, lambda, governing the boundary conditions (BCs) in nanoscale. The solid wall is considered as the face-centered-cubic (fcc) structure. The fluid is the liquid argon with the well-known LJ potential. Based on the concept, the two micro-systems have the same BCs if they have The same criterion number. The degree of the locking BCs is enhanced when lambda equals to 0.757. Such critical criterion number results in the substantial epitaxial ordering and one, two, or even three liquid layers are locked by the solid wall, depending on the coupling energy scale ratio of the solid and liquid atoms. With deviation from the critical criterion number, the flow approaches the slip BCs and there are little ordering structures within the liquid. Always at the same criterion number, the degree of the slip is decreased or the locking is enhanced with increasing the coupling energy scale ratio of the solid and liquid atoms. The above analysis is well confirmed by the molecular dynamics (MD) simulation. The slip length is well correlated in terms of the new criterion number. The future work is suggested to extend the present theory for other microstructures of the solid wall atoms and quasi-LJ potentials.

Evaporation of Ethanol Drops on a Heated Substrate Under Microgravity Conditions

We present in this paper results obtained from a parabolic flight campaign regarding ethanol sessile drop evaporation under reduced gravity conditions. Drops are created using a syringe pump by means of injection through a PTFE (polytetrafluoroethylene) substrate. The drops are recorded using a video camera and an infrared camera to observe the thermal motion inside the drop and on the heating substrate. The experimental set-up presented in this paper enables the simultaneous visualization and access to the heat flux density that is transferred to the drop using a heat flux meter placed between the heating block and the PTFE substrate. We evidence original thermal spreading phenomena during the ethanol drop creation on a heated PTFE substrate. The drop exhibits specific behaviour which is discussed here. This work is performed in the frame of a French-Chinese collaboration (project IMPACHT) for future experiments in a Chinese scientific satellite.

Effects of polymerization conditions on hydrophilic groups in aromatic polyamide thin films

For polyamide used in reverse osmosis (RO) membranes, the content of pendant acid groups is critical to its performance. In this work, FTIR was used to analyze the acid contents in the polyamide films prepared via interfacial polymerization of trimesic acid trichloride (TMC) in hexane and 1,3-phenylenediamine (MPDA) in water, and the effects of reaction conditions, including monomer concentrations, time, and temperature, were studied. It was found that more pendant acid groups are present in the polyramide film at higher TMC concentrations or lower MPDA concentrations, and longer reaction times and lower temperatures also favor the formation of the free acids. These results can be explained by the monomer diffusion in the interfacial polymerization process. This work may help the design and fabrication of RO membranes with different hydrophilicity and target performance.

Job change and workplace learning in the public sector: the significance of new technology for unskilled work.

Focussing here on local authorities and health services, this paper examines the significance of new technology to unskilled work in the public sector as it is developing and the implications for workplace learning. An argument is developed that new technology is central to a minority of examples of job change, although, significantly, it is more important to staff–initiated change and to workers’ ability to fully participate in life beyond the workplace.

Negotiating the boundaries between home and work practices: The case of home-workers

When people work from home, the domains of home and work are co-located, often under one roof. Home-workers have to cope with the meeting of two practices that have traditionally been physically separated. In light of this, we need to understand: how do people who work from home negotiate the boundaries between their home and work practices? What kinds of boundaries do people construct? How do boundaries affect the relationship between home and work as domains? What kinds of boundaries are available to home-workers? Are home-workers in charge of their boundaries or do they co-create them with others? How does this position home-workers in their domains? In order to address these questions, I analysed a variety of data, including newspaper columns, online forum discussions, interviews, and personal diary entries, using a discourse analytic approach that lends itself to issues of positioning. Current literature clashes over whether home-workers are in control of their boundaries, and over the relationship between home and work that arises out of boundary negotiations, i.e. whether home and work are dichotomous or layered. I seek to contribute to boundary theory by adopting a practice theory stance (Wenger, 1998) to guide my analysis. By viewing home and work as practices, I show that boundary negotiations depend on how home-workers are positioned, e.g. if they are positioned as peripheral in a domain, they lack influence over boundaries. I demonstrate that home and work constitute a number of different practices, rather than a rigid dichotomy, and that the way home and work are related are not the same for all home-workers. The application of practice concepts further shows how relationships between practices are created. The contribution of this work is a reconceptualisation of current boundary theory away from individual and cognitive notions (Nippert-Eng, 1996) into the realm of positioning.

'Bowing from the heart': an investigation into discourses of professionalism and the work of caring for students in further education

Since their incorporation in 1993, further education (FE) colleges in England have been responsible for their own staffing and, faced with funding constraints as well as recruitment and retention targets, some have introduced a new category of staff referred to here as 'learning support workers' (LSWs). Though their employment conditions and specific duties vary considerably, LSWs' work often includes providing individual care for students. In this small-scale study, using semi-structured interviews, the perceptions of some teachers and LSWs about the nature of their relationships with each other and with students are investigated. The study is set broadly in the context of debates about the impact of public sector reform on FE colleges and teachers. A discourse analysis approach is adopted in discussion of the data. The authors conclude that although they are differently positioned in relation to traditional discourses of professionalism, both teachers and LSWs are perceived to be carrying out what Hochschild termed 'emotional labour'. The contradictory nature of emotional labour is also highlighted. Some of the implications of employing a new group of workers in FE are discussed.

Validation of the detection of Pseudo-nitzschia spp. using specific RNA probes tested in a microarray format: Calibration of signal based on variability of RNA content with environmental conditions.

Harmful algal blooms (HAB) occur worldwide and cause health problems and economic damage to fisheries and tourism. Monitoring for toxic algae is therefore essential but is based primarily on light microscopy, which is time consuming and can be limited by insufficient morphological characters such that more time is needed to examine critical features with electron microscopy. Monitoring with molecular tools is done in only a few places world-wide. EU FP7 MIDTAL (Microarray Detection of Toxic Algae) used SSU and LSU rRNA genes as targets on microarrays to identify toxic species. In order to comply with current monitoring requirements to report cell numbers as the relevant threshold measurement to trigger closure of fisheries, it was necessary to calibrate our microarray to convert the hybridisation signal obtained to cell numbers. Calibration curves for two species of Pseudo-nitzschia for use with the MIDTAL microarray are presented to obtain cell numbers following hybridisation. It complements work presented by Barra et al. (2012b. Environ. Sci. Pollut. Res. doi: 10.1007/s11356-012-1330-1v) for two other Pseudo-nitzschia spp., Dittami and Edvardsen (2012a. J. Phycol. 48, 1050) for Pseudochatonella, Blanco et al. (2013. Harmful Algae 24, 80) for Heterosigma, McCoy et al. (2013. FEMS. doi: 10.1111/1574-6941.12277) for Prymnesium spp., Karlodinium veneficum, and cf. Chatonella spp. and Taylor et al. (2014. Harmful Algae, in press) for Alexandrium.

Social Work in the Republic of Ireland: A History of the Present

This article reports on research carried out into the nature and position of social work in the child protection and welfare system in Ireland. Employing a methodology of a history of the present, this research sought to crtically examine the nature and position of social work within the social as a 'psy expert'. Selected findings relating to the genealogical and archaeological construction of social work discourse in Ireland are provided to illuminate how its particular historical pathways both enabled and constrained its development. It was found that, to some extent, conceptualizations of social work in the context of its space within the social were applicable to the Irish context. however, it was also found that a number of other factors were also significant, implying the need for problematization of existing theories of the social. Although some of the findings relate directly to the particular spatial context of Ireland, others are transferable to the UK and international contexts. The research asserts that, while social work represents a diffuse and complex activity, enabled and constrained by its genealogical context, the potential exists in the profesion for greater attention to be apid to its archaeoloigcal construction. In light of contemporary neo-liberal conditions of governance, the need for such attention is emphasized.

Chitosan nanoparticle as protein delivery carrier - Systematic examination of fabrication conditions for efficient loading and release

Chitosan nanoparticles fabricated via different preparation protocols have been in recent years widely studied as carriers for therapeutic proteins and genes with varying degree of effectiveness and drawbacks. This work seeks to further explore the polyionic coacervation fabrication process, and associated processing conditions under which protein encapsulation and subsequent release can be systematically and predictably manipulated so as to obtain desired effectiveness. BSA was used as a model protein which was encapsulated by either incorporation or incubation method, using the polyanion tripolyphosphate (TPP) as the coacervation crosslink agent to form chitosan-BSA-TPP nanoparticles. The BSA-loaded chitosan-TPP nanoparticles were characterized for particle size, morphology, zeta potential, BSA encapsulation efficiency, and subsequent release kinetics, which were found predominantly dependent on the factors of chitosan molecular weight, chitosan concentration, BSA loading concentration, and chitosan/TPP mass ratio. The BSA loaded nanoparticles prepared under varying conditions were in the size range of 200-580 nm, and exhibit a high positive zeta potential. Detailed sequential time frame TEM imaging of morphological change of the BSA loaded particles showed a swelling and particle degradation process. Initial burst released due to surface protein desorption and diffusion from sublayers did not relate directly to change of particle size and shape, which was eminently apparent only after 6 h. It is also notable that later stage particle degradation and disintegration did not yield a substantial follow-on release, as the remaining protein molecules, with adaptable 3-D conformation, could be tightly bound and entangled with the cationic chitosan chains. In general, this study demonstrated that the polyionic coacervation process for fabricating protein loaded chitosan nanoparticles offers simple preparation conditions and a clear processing window for manipulation of physiochemical properties of the nanoparticles (e.g., size and surface charge), which can be conditioned to exert control over protein encapsulation efficiency and subsequent release profile. The weakness of the chitosan nanoparticle system lies typically with difficulties in controlling initial burst effect in releasing large quantities of protein molecules. (C) 2007 Elsevier B.V. All rights reserved.

A study of the relationship between process conditions and mechanical strength of mineralized red algae in the preparation of a marine-derived bone void filler

Bone void fillers that can enhance biological function to augment skeletal repair have significant therapeutic potential in bone replacement surgery. This work focuses on the development of a unique microporous (0.5-10 mu m) marine-derived calcium phosphate bioceramic granule. It was prepared fro Corallina officinalis, a mineralized red alga, using a novel manufacturing process. This involved thermal processing, followed by a low pressure-temperature chemical synthesis reaction. The study found that the ability to maintain the unique algal morphology was dependent on the thermal processing conditions. This study investigates the effect of thermal heat treatment on the physiochemical properties of the alga. Thermogravimetric analysis was used to monitor its thermal decomposition. The resultant thermograms indicated the presence of a residual organic phase at temperatures below 500 degrees C and an irreversible solid-state phase transition from mg-rich-calcite to calcium oxide at temperatures over 850 degrees C. Algae and synthetic calcite were evaluated following heat treatment in an air-circulating furance at temperatures ranging from 400 to 800 degrees C. The highest levels of mass loss occurred between 400-500 degrees C and 700-800 degrees C, which were attributed to the organic and carbonate decomposition respectively. The changes in mechanical strength were quantified using a simple mechanical test, which measured the bulk compressive strength of the algae. The mechanical test used may provide a useful evaluation of the compressive properties of similar bone void fillers that are in granular form. The study concluded that soak temperatures in the range of 600 to 700 degrees C provided the optimum physiochemical properties as a precursor to conversion to hydroxyapatite (HA). At these temperatures, a partial phase transition to calcium oxide occurred and the original skeletal morphology of the alga remained intact.

Biogeographical conditions, the transition to agriculture and long-run growth

We use new data on the timing of the transition to agriculture, developed by Putterman and Trainor (2006), to test the theory of Diamond (1997) and Olsson and Hibbs (2005) that an earlier transition is reflected in higher incomes today. Our results confirm the theory, even after controlling for institutional quality and other geographical factors. The date of transition is correlated with prehistoric biogeography (the availability of wild grasses and large domesticable animal species). The factors conducive to high per capita incomes today are good institutions, an early transition to agriculture, access to the sea and a low incidence of fatal malaria. Geographical influences have been at work in all of these proximate determinants of per capita income.

Vitamin D, calcium and dairy intake, and risk of oesophageal adenocarcinoma and its precursor conditions

Evidence is accumulating that vitamin D may be protective against carcinogenesis, although exceptions have been observed for some digestive tract neoplasms. The aim of the present study was to explore the association between dietary vitamin D and related nutrients and the risk of oesophageal adenocarcinoma and its precursor conditions, Barrett's oesophagus and reflux oesophagitis. In an all-Ireland case-control study conducted between March 2002 and July 2005, 218 oesophageal adenocarcinoma patients, 212 Barrett's oesophagus patients, 208 reflux oesophagitis patients and 252 population-based controls completed a 101-item FFQ, and provided lifestyle and demographic information. Multiple logistic regression analysis was applied to examine the association between dietary intake and disease risk. Oesophageal adenocarcinoma risk was significantly greater for individuals with the highest compared with the lowest tertile of vitamin D intake (OR 1·99, 95 % CI 1·03, 3·86; P for trend = 0·02). The direct association could not be attributed to a particular vitamin D food source. Vitamin D intake was unrelated to Barrett's oesophagus and reflux oesophagitis risk. No significant associations were observed for Ca or dairy intake and oesophageal adenocarcinoma, Barrett's oesophagus or reflux oesophagitis development. High vitamin D intake may increase oesophageal adenocarcinoma risk but is not related to reflux oesophagitis and Barrett's oesophagus. Ca and dairy product intake did not influence the development of these oesophageal lesions. These findings suggest that there may be population subgroups at an increased risk of oesophageal adenocarcinoma if advice to improve vitamin D intake from foods is implemented. Limited work has been conducted in this area, and further research is required.

Psychosocial factors in GP work:the effects of taking a GP position or leaving GP work

BACKGROUND: We examined the effects of leaving public sector general practitioner (GP) work and of taking a GP position on changes in work-related psychosocial factors, such as time pressure, patient-related stress, distress and work interference with family. In addition, we examined whether changes in time pressure and patient-related stress mediated the association of employment change with changes of distress and work interference with family. METHODS: Participants were 1705 Finnish physicians (60% women) who responded to surveys in 2006 and 2010. Analyses of covariance were conducted to examine the effect of employment change to outcome changes adjusted for gender, age and response format. Mediational effects were tested following the procedures outlined by Baron and Kenny. RESULTS: Employment change was significantly associated with all the outcomes. Leaving public sector GP work was associated with substantially decreased time pressure, patient-related stress, distress and work interference with family. In contrast, taking a position as a public sector GP was associated with an increase in these factors. Mediation tests suggested that the associations of employment change with distress change and work interference with family change were partially explained by the changes in time pressure and patient-related stress. CONCLUSIONS: Our results showed that leaving public sector GP work is associated with favourable outcomes, whereas taking a GP position in the public sector is associated with adverse effects. Primary health-care organizations should pay more attention to the working conditions of their GPs, in particular, to time pressure and patient-related stress.