Determinação das propriedades físicas e químicas da madeira de Hevea brasiliensis em relação ao painel de extração de látex

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reproductive characteristics and the weight-length relationship in Anableps anableps (Linnaeus, 1758) (Cyprinodontiformes: Anablepidae) from the Amazon Estuary

O presente estudo analisou a relação peso-comprimento e uma série de aspectos da biologia reprodutiva de Anableps anableps da foz do rio Maracanã, no estado brasileiro do Pará. Os espécimes foram coletados por meio de duas redes de emalhar de 30 m de comprimento, com malhas de 15 e 20 mm, e com um puçá com um metro de diâmetro, com malha de 10 mm. Foram capturados 865 espécimes, os quais foram analisados para estabelecer a razão sexual, que foi de 2,12 fêmeas por macho (χ² = 13,07; p<0,05). As fêmeas apresentaram crescimento alométrico positivo, enquanto que os machos foram alométricos negativos. Nas análises adicionais, as gônadas de 371 fêmeas foram observadas ao microscópio. O desenvolvimento gonadal foi classificado em três estádios: imaturo (5,0%), em maturação (12,0%) e maturo (83,0%). O desenvolvimento embrionário foi classificado em cinco fases, de acordo com o tamanho do embrião e do saco vitelino. A fecundidade média foi de 12 ovos / embriões por fêmea (variando de 1-37 ovos / embriões). Uma relação significativa foi verificada entre o comprimento padrão das fêmeas, o peso de seus ovários (R² = 0,257, p < 0,001), e o número de embriões (R² = 0,573, p < 0,001). O tamanho médio da primeira maturação sexual (L₅₀) para as fêmeas foi estimado em 11,7 cm. A espécie se reproduz durante todo o ano.

Avaliação de progênies de longan

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propagação de espécies de Annonaceae com estacas caulinares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Characterization and distribution of pyrogenic carbon in a fraction of archaeological black earth from Caxiuanã

This study aims to determine the atomic ratio of O/C in an archaeological black earth (ABE) profile of the Ilha de Terra site, a region of Caxiuanã in the Pará State, Brazil, to determine the types of pyrogenic carbon (PyC) particles and to infer the source of biomass and burning temperature necessary to produce the PyC. The O/C ratios were monitored using scanning electron microscopy combined with energy dispersive spectroscopy (SEM/EDS). The results indicated atomic ratios for clay, silt and fine sand fractions that were between those registered for the PyC particles types: condensed combustion (CC) (0.09, 0.1, 0.13), charcoal (0.32, 0.31, 0.34) and char (0.43, 0.45, 0.52). CC is the predominant type of particle found because of the high firing temperature (> 350 °C), which is consistent with the probable biomass sources of wood, cellulose and lignin.

Behavior of the brown-rot fungus Gloeophyllum trabeum on thermally-modified Eucalyptus grandis wood

In this study, we aimed evaluate the behavior of the brown-rot fungus Gloeophylum trabeum and white-rot fungus Pycnoporus sanguineus on thermally-modified Eucalyptus grandis wood. To this end, boards from five-year-eleven-month-old E. grandis trees, taken from the Duratex-SA company stock, were thermally-modified between 180 ºC and 220 ºC in the Laboratory of Wood Drying and Preservation at Universidade Estadual Paulista - UNESP, Botucatu, Sao Paulo state Brazil. Samples of each treatment were tested according to the ASTM D-2017 (2008) technical norm. The accelerated decay caused by the brown-rot fungus G. trabeum was compared with the decay caused by the white-rot fungus P. sanguineus, studied by Calonego et al. (2010). The results showed that (1) brown-rot fungus caused greater decay than white-rot fungus; and (2) the increase in temperature from 180 to 220 ºC caused reductions between 28.2% and 70.0% in the weight loss of E. grandis samples incubated with G. trabeum.

Development of the male reproductive system in Callinectes ornatus Ordway, 1863 (Brachyura: Portunidae)

This study describes the histology and histochemistry of the male reproductive system in Callinectes ornatus, comparing juvenile and adult developmental stages. We also analyzed changes in the gonadosomatic (GSI) and hepatosomatic (HSI) indices, and the weights of the testis and vas deferens during the development. The results showed that all stages, beginning with the juvenile (JUV), through developing (DEV) and mature (MAT) adult males of C. ornatus produce sperm and spermatophores. During development, testicular lobes showed the same characteristics of production and release of sperm into the seminiferous duct. The vas deferens showed little histological and histochemical change in the epithelium in juvenile and adult males. The differences consisted of the larger amount of secretion in MAT males compared to JUV and DEV ones. The chemical composition of the seminal fluid was similar, but MAT males produced a more homogeneous secretion. Morphological and physiological maturation are not synchronized in C. ornatus, since JUV males produced spermatophores similar to those in DEV and MAT males. However, these JUV are not yet able to reproduce, since they still have the abdomen attached to the cephalothoracic sternum. The increase of the GSI during development was significant for MAT males, and is related to the production of sufficient volume of seminal fluid to form the sperm plug in the female seminal receptacle. The HSI decreased from DEV to MAT adult stages, indicating that reserves from the hepatopancreas are used to develop the reproductive system after the pubertal molt.

Particleboard produced with sawmill waste of different wood species

This study aimed to investigate physical performance of particleboards produced with waste from sawmills, containing different wood species, and two adhesives: urea-formaldehyde (UF) based resin and castor-oil (PU) based bi-component polyurethane resin. Panels were produced with nominal density 0.8gcm(-3); pressing temperature 110 degrees C; pressing time 10 min; specific pressure 5 MPa. Water absorption (2 and 24h); thickness swelling (2 and 24h); density; and moisture content were investigated. Results confirmed that the produced panels presented compatible physical properties in comparison with other researches referred in literature, proving the feasibility of inputs employed. Panels produced PU showed better performance than those produced with UF.

Comparison of changes in dental and bone radiographic densities in the presence of different soft-tissue simulators using pixel intensity and digital subtraction analyses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Foraging in subterranean termites (Isoptera: Rhinotermitidae): how do Heterotermes tenuis and Coptotermes gestroi behave when they locate equivalent food resources?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relative growth and morphological sexual maturity of the freshwater crab Trichodactylus fluviatilis Latreille 1828 (Decapoda, Trichodactylidae) from west central Sao Paulo State, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Conversion between basic density and apparent density at any moisture content in Eucalyptus grandis

Wood basic density (BD) is related to other wood characteristics and its determination is important in forest inventory, though BD must be differentiated from the apparent density (AD), which relates to the moisture content (MC) of wood. The aim of this study is to demonstrate a reliable conversion from BD to AD for any MC of Eucalyptus grandis wood based on two exponential and linear models that relate volumetric shrinkage to MC. To this end, wood specimens were submitted to drying and the volumetric shrinkage was determined as a function of MC. The two models proved to be efficient in the conversion of BD to AD and vice versa.

Microscopic Evidence of the Opportunistic Reproductive Strategy and Early Sexual Maturation of the Small-Sized Characin Knodus moenkhausii (Characidae, Pisces)

We investigated the reproductive biology of Knodus moenkhausii, an abundantsmall-sized characin fish with broad occurrence in the Parana River basin, Bra-zil. Specimens were collected monthly to determine fecundity, length at firstmaturity, reproductive period and spawning type. Gonads were macroscopically classified according to their form, size and texture in three different stages(immature, maturing or mature). Histological procedures were conducted toconfirm gonadal developmental stages, and it was possible to notice thatmaturing females actually presented atretic oocytes, and all males that weremacroscopically classified as immature, maturing and mature actually presentedabundant spermatozoa in their gonads. Because of these discrepancies, a reclas-sification of gonadal maturations stages was needed after histological analysis,reinforcing its importance to studies on the reproduction of small characins.Reproduction occurred throughout the year though with two peaks. The lengthof the smallest mature individuals was 13 mm SL for males and 24 mm SL for females. Despite presenting relatively small batch fecundity, some life historytraits such as early reproduction, multiple spawning throughout the year, inassociation with known opportunistic feeding habits, explain the high abun-dance of this species in locations where it occurs.

Estimativas dos parâmetros genéticos para seleção de árvores de Eucalyptus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Study of the feasibility of mix of species from sawmill waste and limiting for particleboard

This study aims to determine physical properties of particleboard made of sawmill waste, as a mix of several wood species, and two adhesives: urea-formaldehyde, usually employed in industry (even with drawbacks or formaldehyde emission during pressing) and FASTBOND®, water based resin, still poorly referenced in literature. Sixteen panels have been produced, in four experimental conditions, defined by using two adhesives and a 12 mm thick limiter (or not). Variance analysis was adopted to evaluate influence of experimental conditions on physical properties of produced panels, manufactured in nominal dimensions 350x350mm; 10% resin related to particles mass (at 5% moisture); 3.5 MPa compaction pressure, temperature 130°C, in a 10 min cycle. Tests to determine density, moisture content, swelling and water absorption were carried out based on normative parameters of ABNT NBR 14810:2006. Results have been satisfactory to panels produced with urea-formaldehyde but those manufactured with polychloroprene based resin (FASTBOND®) not meet regulatory requirements. Best results have been obtained without limiter.