Suppression of spurious intermediate frequency modes in under-integrated elements by combined stiffness/viscous stabilization

Solutions employing perturbation stiffness or viscous hourglass control with one-point quadrature finite elements often exhibit spurious modes in the intermediate frequency range. These spurious frequencies are demonstrated in several examples and their origin is explained. Then it is shown that by critically damping the hourglass modes, these spurious mid-range frequency modes can be suppressed. Estimates of the hourglass frequency and damping coefficients are provided for the plane 4-node quadrilateral and a 4-node shell element. Results are presented that show almost complete annihilation of spurious intermediate frequency modes for both linear and non-linear problems. Copyright (c) 2005 John Wiley & Sons, Ltd.

A new approach to control of MIMO processes with static nonlinearities using an extended IMC framework

In this paper, a new control design method is proposed for stable processes which can be described using Hammerstein-Wiener models. The internal model control (IMC) framework is extended to accommodate multiple IMC controllers, one for each subsystem. The concept of passive systems is used to construct the IMC controllers which approximate the inverses of the subsystems to achieve dynamic control performance. The Passivity Theorem is used to ensure the closed-loop stability. (c) 2005 Elsevier Ltd. All rights reserved.

Effective cell-centred time-domain Maxwell's equations numerical solvers

This research work analyses techniques for implementing a cell-centred finite-volume time-domain (ccFV-TD) computational methodology for the purpose of studying microwave heating. Various state-of-the-art spatial and temporal discretisation methods employed to solve Maxwell's equations on multidimensional structured grid networks are investigated, and the dispersive and dissipative errors inherent in those techniques examined. Both staggered and unstaggered grid approaches are considered. Upwind schemes using a Riemann solver and intensity vector splitting are studied and evaluated. Staggered and unstaggered Leapfrog and Runge-Kutta time integration methods are analysed in terms of phase and amplitude error to identify which method is the most accurate and efficient for simulating microwave heating processes. The implementation and migration of typical electromagnetic boundary conditions. from staggered in space to cell-centred approaches also is deliberated. In particular, an existing perfectly matched layer absorbing boundary methodology is adapted to formulate a new cell-centred boundary implementation for the ccFV-TD solvers. Finally for microwave heating purposes, a comparison of analytical and numerical results for standard case studies in rectangular waveguides allows the accuracy of the developed methods to be assessed. © 2004 Elsevier Inc. All rights reserved.

Theoretical and numerical analysis of large-scale heat transfer problems with temperature-dependent pore-fluid densities

Purpose - In many scientific and engineering fields, large-scale heat transfer problems with temperature-dependent pore-fluid densities are commonly encountered. For example, heat transfer from the mantle into the upper crust of the Earth is a typical problem of them. The main purpose of this paper is to develop and present a new combined methodology to solve large-scale heat transfer problems with temperature-dependent pore-fluid densities in the lithosphere and crust scales. Design/methodology/approach - The theoretical approach is used to determine the thickness and the related thermal boundary conditions of the continental crust on the lithospheric scale, so that some important information can be provided accurately for establishing a numerical model of the crustal scale. The numerical approach is then used to simulate the detailed structures and complicated geometries of the continental crust on the crustal scale. The main advantage in using the proposed combination method of the theoretical and numerical approaches is that if the thermal distribution in the crust is of the primary interest, the use of a reasonable numerical model on the crustal scale can result in a significant reduction in computer efforts. Findings - From the ore body formation and mineralization points of view, the present analytical and numerical solutions have demonstrated that the conductive-and-advective lithosphere with variable pore-fluid density is the most favorite lithosphere because it may result in the thinnest lithosphere so that the temperature at the near surface of the crust can be hot enough to generate the shallow ore deposits there. The upward throughflow (i.e. mantle mass flux) can have a significant effect on the thermal structure within the lithosphere. In addition, the emplacement of hot materials from the mantle may further reduce the thickness of the lithosphere. Originality/value - The present analytical solutions can be used to: validate numerical methods for solving large-scale heat transfer problems; provide correct thermal boundary conditions for numerically solving ore body formation and mineralization problems on the crustal scale; and investigate the fundamental issues related to thermal distributions within the lithosphere. The proposed finite element analysis can be effectively used to consider the geometrical and material complexities of large-scale heat transfer problems with temperature-dependent fluid densities.

Planar electromagnetic bandgap structures

This article presents various novel and conventional planar electromagnetic bandgap (EBG)-assisted transmission lines. Both microstrip lines and coplanar waveguides (CPWs) are designed with circular, rectangular, annular, plus-sign and fractal-patterned EBGs and dumbbell-shaped defected ground structure (DGS). The dispersion characteristics and the slow-wave factors of the design are investigated. (c) 2006 Wiley Periodicals, Inc.

Random vibration of the functionally graded laminates in thermal environments

This work deals with the random free vibration of functionally graded laminates with general boundary conditions and subjected to a temperature change, taking into account the randomness in a number of independent input variables such as Young's modulus, Poisson's ratio and thermal expansion coefficient of each constituent material. Based on third-order shear deformation theory, the mixed-type formulation and a semi-analytical approach are employed to derive the standard eigenvalue problem in terms of deflection, mid-plane rotations and stress function. A mean-centered first-order perturbation technique is adopted to obtain the second-order statistics of vibration frequencies. A detailed parametric study is conducted, and extensive numerical results are presented in both tabular and graphical forms for laminated plates that contain functionally graded material which is made of aluminum and zirconia, showing the effects of scattering in thermo-clastic material constants, temperature change, edge support condition, side-to-thickness ratio, and plate aspect ratio on the stochastic characteristics of natural frequencies. (c) 2005 Elsevier B.V. All rights reserved.

Using circular statistics to analyse time patterns in crime incidence

A set of techniques referred to as circular statistics has been developed for the analysis of directional and orientational data. The unit of measure for such data is angular (usually in either degrees or radians), and the statistical distributions underlying the techniques are characterised by their cyclic nature-for example, angles of 359.9 degrees are considered close to angles of 0 degrees. In this paper, we assert that such approaches can be easily adapted to analyse time-of-day and time-of-week data, and in particular daily cycles in the numbers of incidents reported to the police. We begin the paper by describing circular statistics. We then discuss how these may be modified, and demonstrate the approach with some examples for reported incidents in the Cardiff area of Wales. (c) 2005 Elsevier Ltd. All rights reserved.

Modelling sediment delivery ratio over the Murray Darling Basin

This paper presents a scientific and technical description of the modelling framework and the main results of modelling the long-term average sediment delivery at hillslope to medium-scale catchments over the entire Murray Darling Basin (MDB). A theoretical development that relates long-term averaged sediment delivery to the statistics of rainfall and catchment parameters is presented. The derived flood frequency approach was adapted to investigate the problem of regionalization of the sediment delivery ratio (SDR) across the Basin. SDR, a measure of catchment response to the upland erosion rate, was modeled by two lumped linear stores arranged in series: hillslope transport to the nearest streams and flow routing in the channel network. The theory shows that the ratio of catchment sediment residence time (SRT) to average effective rainfall duration is the most important control in the sediment delivery processes. In this study, catchment SRTs were estimated using travel time for overland flow multiplied by an enlargement factor which is a function of particle size. Rainfall intensity and effective duration statistics were regionalized by using long-term measurements from 195 pluviograph sites within and around the Basin. Finally, the model was implemented across the MDB by using spatially distributed soil, vegetation, topographical and land use properties under Geographic Information System (GIs) environment. The results predict strong variations in SDR from close to 0 in floodplains to 70% in the eastern uplands of the Basin. (c) 2005 Elsevier Ltd. All rights reserved.

Modelling trickle irrigation: Comparison of analytical and numerical models for estimation of wetting front position with time

Irrigation practices that are profligate in their use of water have come under closer scrutiny by water managers and the public. Trickle irrigation has the propensity to increase water use efficiency but only if the system is designed to meet the soil and plant conditions. Recently we have provided a software tool, WetUp (http://www.clw.csiro.au/products/wetup/), to calculate the wetting patterns from trickle irrigation emitters. WetUp uses an analytical solution to calculate the wetted perimeter for both buried and surface emitters. This analytical solution has a number of assumptions, two of which are that the wetting front is defined by water content at which the hydraulic conductivity (K) is I mm day(-1) and that the flow occurs from a point source. Here we compare the wetting patterns calculated with a 2-dimensional numerical model, HYDRUS2D, for solving the water flow into typical soils with the analytical solution. The results show that the wetting patterns are similar, except when the soil properties result in the assumption of a point source no longer being a good description of the flow regime. Difficulties were also experienced with getting stable solutions with HYDRUS2D for soils with low hydraulic conductivities. (c) 2005 Elsevier Ltd. All rights reserved.

An infrastructure for acquiring high quality semantic metadata

Because metadata that underlies semantic web applications is gathered from distributed and heterogeneous data sources, it is important to ensure its quality (i.e., reduce duplicates, spelling errors, ambiguities). However, current infrastructures that acquire and integrate semantic data have only marginally addressed the issue of metadata quality. In this paper we present our metadata acquisition infrastructure, ASDI, which pays special attention to ensuring that high quality metadata is derived. Central to the architecture of ASDI is a verification engine that relies on several semantic web tools to check the quality of the derived data. We tested our prototype in the context of building a semantic web portal for our lab, KMi. An experimental evaluation comparing the automatically extracted data against manual annotations indicates that the verification engine enhances the quality of the extracted semantic metadata.

Europeana Creative. EDM Endpoint. Custom Views

The paper discusses the Europeana Creative project which aims to facilitate re-use of cultural heritage metadata and content by the creative industries. The paper focuses on the contribution of Ontotext to the project activities. The Europeana Data Model (EDM) is further discussed as a new proposal for structuring the data that Europeana will ingest, manage and publish. The advantages of using EDM instead of the current ESE metadata set are highlighted. Finally, Ontotext’s EDM Endpoint is presented, based on OWLIM semantic repository and SPARQL query language. A user-friendly RDF view is presented in order to illustrate the possibilities of Forest - an extensible modular user interface framework for creating linked data and semantic web applications.

REST SERVER IN JOLIE - Practical Case

The aim of this thesis is to merge two of the emerging paradigms about web programming: RESTful Web Development and Service-Oriented Programming. REST is the main architectural paradigm about web applications, they are characterised by procedural structure which avoid the use of handshaking mechanisms. Even though REST has a standard structure to access the resources of the web applications, the backend side is usually not very modular if not complicated. Service-Oriented Programming, instead, has as one of the fundamental principles, the modularisation of the components. Service-Oriented Applications are characterised by separate modules that allow to simplify the devel- opment of the web applications. There are very few example of integration between these two technologies: it seems therefore reasonable to merge them. In this thesis the methodologies studied to reach this results are explored through an application that helps to handle documents and notes among several users, called MergeFly. The MergeFly practical case, once that all the specifics had been set, will be utilised in order to develop and handle HTTP requests through SOAP. In this document will be first defined the 1) characteristics of the application, 2) SOAP technology, partially introduced the 3) Jolie Language, 4) REST and finally a 5) Jolie-REST implementation will be offered through the MergeFly case. It is indeed implemented a token mechanism for authentication: it has been first discarded sessions and cookies algorithm of authentication in so far not into the pure RESTness theory, even if often used). In the final part the functionality and effectiveness of the results will be evaluated, judging the Jolie-REST duo.

Predicting Academic Performance Based on Students' Blog and Microblog Posts

This study investigates the degree to which textual complexity indices applied on students’ online contributions, corroborated with a longitudinal analysis performed on their weekly posts, predict academic performance. The source of student writing consists of blog and microblog posts, created in the context of a project-based learning scenario run on our eMUSE platform. Data is collected from six student cohorts, from six consecutive installments of the Web Applications Design course, comprising of 343 students. A significant model was obtained by relying on the textual complexity and longitudinal analysis indices, applied on the English contributions of 148 students that were actively involved in the undertaken projects.

React vs Angular : Slaget om användarupplevelsen

Lately, various programming frameworks has been developed for developing web applications. These frameworks focus on increasing the user experience by performance improvements such as faster render times and response times. One of these frameworks are React, which has introduced a completely new architectural pattern for both managing the state and data flow of an application. React also offers support for native application development and makes server-side rendering possible. Something that is difficult to accomplish with an application developed with Angular 1.5, which is used by the company Dewire today. The aim of this thesis was to compare React with an existing Angular project, in order to determine whether React could be a potential replacement for Angular. To gain knowledge about the subject, a theoretical study of web- based sources has been made. While the practical part has been to rebuild a web application with React together with the architecture Flux, which is based on a view from the Angular project. The implementation process was repeated until the view was completed and a desired data flow, as in the Angular application, was reached. The resulting React application was later compared with the Angular application developed by the company, where the outcome of the comparison showed that the React performed better than Angular in all tests. In conclusion, due to the timeframe of the project, only the most important parts of the Angular project were implemented in order to carry out the measurements that were of interest to the company. By recreating most of the functionality, or the entire Angular application, more interesting comparisons could have been done.