An Autonomous Engine for Services Configuration and Deployment.

The runtime management of the infrastructure providing service-based systems is a complex task, up to the point where manual operation struggles to be cost effective. As the functionality is provided by a set of dynamically composed distributed services, in order to achieve a management objective multiple operations have to be applied over the distributed elements of the managed infrastructure. Moreover, the manager must cope with the highly heterogeneous characteristics and management interfaces of the runtime resources. With this in mind, this paper proposes to support the configuration and deployment of services with an automated closed control loop. The automation is enabled by the definition of a generic information model, which captures all the information relevant to the management of the services with the same abstractions, describing the runtime elements, service dependencies, and business objectives. On top of that, a technique based on satisfiability is described which automatically diagnoses the state of the managed environment and obtains the required changes for correcting it (e.g., installation, service binding, update, or configuration). The results from a set of case studies extracted from the banking domain are provided to validate the feasibility of this proposa

Selective ablation with UV lasers of a-Si:H thin film solar cells in direct scribing configuration

Monolithical series connection of silicon thin-film solar cells modules performed by laser scribing plays a very important role in the entire production of these devices. In the current laser process interconnection the two last steps are developed for a configuration of modules where the glass is essential as transparent substrate. In addition, the change of wavelength in the employed laser sources is sometimes enforced due to the nature of the different materials of the multilayer structure which make up the device. The aim of this work is to characterize the laser patterning involved in the monolithic interconnection process in a different configurations of processing than the usually performed with visible laser sources. To carry out this study, we use nanosecond and picosecond laser sources working at 355nm of wavelength in order to achieve the selective ablation of the material from the film side. To assess this selective removal of material has been used EDX (energy dispersive using X-ray) analysis

Managing software development information in global configuration management activities

Software Configuration Management (SCM) techniques have been considered the entry point to rigorous software engineering, where multiple organizations cooperate in a decentralized mode to save resources, ensure the quality of the diversity of software products, and manage corporate information to get a better return of investment. The incessant trend of Global Software Development (GSD) and the complexity of implementing a correct SCM solution grow not only because of the changing circumstances, but also because of the interactions and the forces related to GSD activities. This paper addresses the role SCM plays in the development of commercial products and systems, and introduces a SCM reference model to describe the relationships between the different technical, organizational, and product concerns any software development company should support in the global market.

Experimental investigation on box-wing configuration for UAS

The range for airframe configurations available for UAS is as diverse as those used for manned aircraft and more since the commercial risk in trying unorthodox solutions is less for the UAS manufacturer. This is principally because the UAS airframes are usually much smaller than the manned aircraft and operators are less likely to have a bias against unconventional configurations. One of these unconventional configurations is the box-wing, which is an unconventional solution for the design of the new UAS generation. The existence of two wings separated in different planes that are, however, significantly close together, means that the aerodynamic analysis by theoretical or computational methods is a difficult task, due to the considerable interference existing. Considering the fact that the flight of most UAS takes place at low Reynolds numbers, it is necessary to study the aerodynamics of the box wing configuration by testing different models in a wind tunnel to be able to obtain reasonable results. In the present work, the study is enhanced by varying not only the sweepback angles of the two wings, but also their position along the models’ fuselage. Certain models have shown being more efficient than others, pointing out that certain relative positions of wing exists that can improve the aerodynamics efficiency of the box wing configuration.

Study of an electronic steering antenna with a staggered phase shifter configuration

This paper presents a study of three possible solutions that can be taken into account to control the phase shift between elements in an antenna array. Because commercial digital phase shifters have become a strategic element by U.S. Government, these elements have increased their price. For this reason, it is necessary to adopt some solutions that allow us to deal with the design and construction of antenna arrays.

Configuration management and product lines to enhance the replication process in software engineering

This research is concerned with the experimental software engineering area, specifically experiment replication. Replication has traditionally been viewed as a complex task in software engineering. This is possibly due to the present immaturity of the experimental paradigm applied to software development. Researchers usually use replication packages to replicate an experiment. However, replication packages are not the solution to all the information management problems that crop up when successive replications of an experiment accumulate. This research borrows ideas from the software configuration management and software product line paradigms to support the replication process. We believe that configuration management can help to manage and administer information from one replication to another: hypotheses, designs, data analysis, etc. The software product line paradigm can help to organize and manage any changes introduced into the experiment by each replication. We expect the union of the two paradigms in replication to improve the planning, design and execution of further replications and their alignment with existing replications. Additionally, this research work will contribute a web support environment for archiving information related to different experiment replications. Additionally, it will provide flexible enough information management support for running replications with different numbers and types of changes. Finally, it will afford massive storage of data from different replications. Experimenters working collaboratively on the same experiment must all have access to the different experiments.

Using configuration management and product line software paradigms to support the experimentation process in software engineering.

There is no empirical evidence whatsoever to support most of the beliefs on which software construction is based. We do not yet know the adequacy, limits, qualities, costs and risks of the technologies used to develop software. Experimentation helps to check and convert beliefs and opinions into facts. This research is concerned with the replication area. Replication is a key component for gathering empirical evidence on software development that can be used in industry to build better software more efficiently. Replication has not been an easy thing to do in software engineering (SE) because the experimental paradigm applied to software development is still immature. Nowadays, a replication is executed mostly using a traditional replication package. But traditional replication packages do not appear, for some reason, to have been as effective as expected for transferring information among researchers in SE experimentation. The trouble spot appears to be the replication setup, caused by version management problems with materials, instruments, documents, etc. This has proved to be an obstacle to obtaining enough details about the experiment to be able to reproduce it as exactly as possible. We address the problem of information exchange among experimenters by developing a schema to characterize replications. We will adapt configuration management and product line ideas to support the experimentation process. This will enable researchers to make systematic decisions based on explicit knowledge rather than assumptions about replications. This research will output a replication support web environment. This environment will not only archive but also manage experimental materials flexibly enough to allow both similar and differentiated replications with massive experimental data storage. The platform should be accessible to several research groups working together on the same families of experiments.

Design techniques for xilinx virtex FPGA configuration memory scrubbers

SRAM-based FPGAs are in-field reconfigurable an unlimited number of times. This characteristic, together with their high performance and high logic density, proves to be very convenient for a number of ground and space level applications. One drawback of this technology is that it is susceptible to ionizing radiation, and this sensitivity increases with technology scaling. This is a first order concern for applications in harsh radiation environments, and starts to be a concern for high reliability ground applications. Several techniques exist for coping with radiation effects at user application. In order to be effective they need to be complemented with configuration memory scrubbing, which allows error mitigation and prevents failures due to error accumulation. Depending on the radiation environment and on the system dependability requirements, the configuration scrubber design can become more or less complex. This paper classifies and presents current and novel design methodologies and architectures for SRAM-based FPGAs, and in particular for Xilinx Virtex-4QV/5QV, configuration memory scrubbers.

A Knowledge Model for Automatic Configuration of Traffic Messages

This paper describes a knowledge model for a configuration problem in the do-main of traffic control. The goal of this model is to help traffic engineers in the dynamic selection of a set of messages to be presented to drivers on variable message signals. This selection is done in a real-time context using data recorded by traffic detectors on motorways. The system follows an advanced knowledge-based solution that implements two abstract problem solving methods according to a model-based approach recently proposed in the knowledge engineering field. Finally, the paper presents a discussion about the advantages and drawbacks found for this problem as a consequence of the applied knowledge modeling ap-proach.

Global Stability Analysis of a Compressible Turbulent Flow around a High-Lift Configuration

The purpose of this work is to analyze a complex high lift configuration for which significant regions of separated flow are present. Current state of the art methods have some diffculty to predict the origin and the progression of this separated flow when increasing the angle of attack. The mechanisms responsible for the maximum lift limit on multi-element wing con?gurations are not clear; this stability analysis could help to understand the physics behind the phenomenon and to find a relation between the flow separation and the instability onset. The methodology presented herein consists in the computation of a steady base flow solution based on a finite volume discretization and a proposal of the solution for a generalized eigenvalue problem corresponding to the perturbed and linearized problem. The eigenvalue problem has been solved with the Arnoldi iterative method, one of the Krylov subspace projection methods. The described methodology was applied to the NACA0012 test case in subsonic and in transonic conditions and, finally, for the first time to the authors knowledge, on an industrial multi-component geometry, such as the A310 airfoil, in order to identify low frequency instabilities related to the separation. One important conclusion is that for all the analyzed geometries, one unstable mode related to flow separation appears for an angle of attack greater than the one correspondent to the maximum lift coe?cient condition. Finally, an adjoint study was carried out in order to evaluate the receptivity and the structural sensitivity of the geometries, giving an indication of the domain region that could be modified resulting in the biggest change of the flowfield.

A proposal for a model-based approach for adapting software configuration to runtime environments

Las metodologías de desarrollo ágiles han sufrido un gran auge en entornos industriales durante los últimos años debido a la rapidez y fiabilidad de los procesos de desarrollo que proponen. La filosofía DevOps y específicamente las metodologías derivadas de ella como Continuous Delivery o Continuous Deployment promueven la gestión completamente automatizada del ciclo de vida de las aplicaciones, desde el código fuente a las aplicaciones ejecutándose en entornos de producción. La automatización se ve como un medio para producir procesos repetibles, fiables y rápidos. Sin embargo, no todas las partes de las metodologías Continuous están completamente automatizadas. En particular, la gestión de la configuración de los parámetros de ejecución es un problema que ha sido acrecentado por la elasticidad y escalabilidad que proporcionan las tecnologías de computación en la nube. La mayoría de las herramientas de despliegue actuales pueden automatizar el despliegue de la configuración de parámetros de ejecución, pero no ofrecen soporte a la hora de fijar esos parámetros o de validar los ficheros que despliegan, principalmente debido al gran abanico de opciones de configuración y el hecho de que el valor de muchos de esos parámetros es fijado en base a preferencias expresadas por el usuario. Esto hecho hace que pueda parecer que cualquier solución al problema debe estar ajustada a una aplicación específica en lugar de ofrecer una solución general. Con el objetivo de solucionar este problema, propongo un modelo de configuración que puede ser inferido a partir de instancias de configuración existentes y que puede reflejar las preferencias de los usuarios para ser usado para facilitar los procesos de configuración. El modelo de configuración puede ser usado como la base de un proceso de configuración interactivo capaz de guiar a un operador humano a través de la configuración de una aplicación para su despliegue en un entorno determinado o para detectar cambios de configuración automáticamente y producir una configuración válida que se ajuste a esos cambios. Además, el modelo de configuración debería ser gestionado como si se tratase de cualquier otro artefacto software y debería ser incorporado a las prácticas de gestión habituales. Por eso también propongo un modelo de gestión de servicios que incluya información relativa a la configuración de parámetros de ejecución y que además es capaz de describir y gestionar propuestas arquitectónicas actuales tales como los arquitecturas de microservicios. ABSTRACT Agile development methodologies have risen in popularity within the industry in recent years due to the speed and reliability of the processes they propose. The DevOps philosophy and specifically the methodologies derived from it such as Continuous Delivery and Continuous Deployment push for a totally automated management of the application lifecycle, from the source code to the software running in production environment. Automation in this regard is used as a means to produce repeatable, reliable and fast processes. However, not all parts of the Continuous methodologies are completely automatized. In particular, management of runtime parameter configuration is a problem that has increased its impact in deployment process due to the scalability and elasticity provided by cloud technologies. Most deployment tools nowadays can automate the deployment of runtime parameter configuration, but they offer no support for parameter setting o configuration validation, as the range of different configuration options and the fact that the value of many of those parameters is based on user preference seems to imply that any solution to the problem will have to be tailored to a specific application. With the aim to solve this problem I propose a configuration model that can be inferred from existing configurations and reflect user preferences in order to ease the configuration process. The configuration model can be used as the base of an interactive configuration process capable of guiding a human operator through the configuration of an application for its deployment in a specific environment or to automatically detect configuration changes and produce valid runtime parameter configurations that take into account those changes. Additionally, the configuration model should be managed as any other software artefact and should be incorporated into current management practices. I also propose a service management model that includes the configuration information and that is able to describe and manage current architectural practices such as the microservices architecture.

RIGS (repeat-induced gene silencing) in Arabidopsis is transcriptional and alters chromatin configuration.

We have previously reported repeat-induced gene silencing (RIGS) in Arabidopsis, in which transgene expression may be silenced epigenetically when repeated sequences are present. Among an allelic series of lines comprising a primary transformant and various recombinant progeny carrying different numbers of drug resistance gene copies at the same locus, silencing was found to depend strictly on repeated sequences and to correlate with an absence of steady-state mRNA. We now report characterization, in nuclei isolated from the same transgenic lines, of gene expression by nuclear run-on assay and of chromatin structure by nuclease protection assay. We find that silencing is correlated with absence of run-on transcripts, indicating that expression is silenced at the level of transcription. We find further that silencing is also correlated with increased resistance to both DNase I and micrococcal nuclease, indicating that the silenced state reflects a change in chromatin configuration. We propose that silencing results when a locally paired region of homologous repeated nucleotide sequences is flanked by unpaired heterologous DNA, which leads chromatin to adopt a local configuration that is difficult to transcribe, and possibly akin to heterochromatin.

A maximum likelihood algorithm for genome mapping of cytogenetic loci from meiotic configuration data.

Frequencies of meiotic configurations in cytogenetic stocks are dependent on chiasma frequencies in segments defined by centromeres, breakpoints, and telomeres. The expectation maximization algorithm is proposed as a general method to perform maximum likelihood estimations of the chiasma frequencies in the intervals between such locations. The estimates can be translated via mapping functions into genetic maps of cytogenetic landmarks. One set of observational data was analyzed to exemplify application of these methods, results of which were largely concordant with other comparable data. The method was also tested by Monte Carlo simulation of frequencies of meiotic configurations from a monotelodisomic translocation heterozygote, assuming six different sample sizes. The estimate averages were always close to the values given initially to the parameters. The maximum likelihood estimation procedures can be extended readily to other kinds of cytogenetic stocks and allow the pooling of diverse cytogenetic data to collectively estimate lengths of segments, arms, and chromosomes.

An investigation of truck size and weight limits - technical supplement. Volume I: analysis of truck payloads under various limits of size, weight and configuration. Final report.

Transportation Department, Office of the Assistant Secretary for Policy and International Affairs, Washington, D.C.