1000 resultados para VISTA VARIABLES
Resumo:
Commuting consists in the fact that an important fraction of workers in developed countries do not reside close to their workplaces but at long distances from them, so they have to travel to their jobs and then back home daily. Although most workers hold a job in the same municipality where they live or in a neighbouring one, an important fraction of workers face long daily trips to get to their workplace and then back home.Even if we divide Catalonia (Spain) in small aggregations of municipalities, trying to make them as close to local labour markets as possible, we will find out that some of them have a positive commuting balance, attracting many workers from other areas and providing local jobs for almost all their resident workers. On the other side, other zones seem to be mostly residential, so an important fraction of their resident workers hold jobs in different local labour markets. Which variables influence an area¿s role as an attraction pole or a residential zone? In previous papers (Artís et al, 1998a, 2000; Romaní, 1999) we have brought out the main individual variables that influence commuting by analysing a sample of Catalan workers and their commuting decisions. In this paper we perform an analysis of the territorial variables that influence commuting, using data for aggregate commuting flows in Catalonia from the 1991 and 1996 Spanish Population Censuses.These variables influence commuting in two different ways: a zone with a dense, welldeveloped economical structure will have a high density of jobs. Work demand cannot be fulfilled with resident workers, so it spills over local boundaries. On the other side, this economical activity has a series of side-effects like pollution, congestion or high land prices which make these areas less desirable to live in. Workers who can afford it may prefer to live in less populated, less congested zones, where they can find cheaper land, larger homes and a better quality of life. The penalty of this decision is an increased commuting time. Our aim in this paper is to highlight the influence of local economical structure and amenities endowment in the workplace-residence location decision. A place-to-place logit commuting models is estimated for 1991 and 1996 in order to find the economical and amenities variables with higher influence in commuting decisions. From these models, we can outline a first approximation to the evolution of these variables in the 1986-1996 period. Data have been obtained from aggregate flow travel-matrix from the 1986, 1991 and 1996 Spanish Population Censuses
Resumo:
Commuting consists in the fact that an important fraction of workers in developed countries do not reside close to their workplaces but at long distances from them, so they have to travel to their jobs and then back home daily. Although most workers hold a job in the same municipality where they live or in a neighbouring one, an important fraction of workers face long daily trips to get to their workplace and then back home.Even if we divide Catalonia (Spain) in small aggregations of municipalities, trying to make them as close to local labour markets as possible, we will find out that some of them have a positive commuting balance, attracting many workers from other areas and providing local jobs for almost all their resident workers. On the other side, other zones seem to be mostly residential, so an important fraction of their resident workers hold jobs in different local labour markets. Which variables influence an area¿s role as an attraction pole or a residential zone? In previous papers (Artís et al, 1998a, 2000; Romaní, 1999) we have brought out the main individual variables that influence commuting by analysing a sample of Catalan workers and their commuting decisions. In this paper we perform an analysis of the territorial variables that influence commuting, using data for aggregate commuting flows in Catalonia from the 1991 and 1996 Spanish Population Censuses.These variables influence commuting in two different ways: a zone with a dense, welldeveloped economical structure will have a high density of jobs. Work demand cannot be fulfilled with resident workers, so it spills over local boundaries. On the other side, this economical activity has a series of side-effects like pollution, congestion or high land prices which make these areas less desirable to live in. Workers who can afford it may prefer to live in less populated, less congested zones, where they can find cheaper land, larger homes and a better quality of life. The penalty of this decision is an increased commuting time. Our aim in this paper is to highlight the influence of local economical structure and amenities endowment in the workplace-residence location decision. A place-to-place logit commuting models is estimated for 1991 and 1996 in order to find the economical and amenities variables with higher influence in commuting decisions. From these models, we can outline a first approximation to the evolution of these variables in the 1986-1996 period. Data have been obtained from aggregate flow travel-matrix from the 1986, 1991 and 1996 Spanish Population Censuses
Resumo:
Objective: To describe the methodology of Confirmatory Factor Analyis for categorical items and to apply this methodology to evaluate the factor structure and invariance of the WHO-Disability Assessment Schedule (WHODAS-II) questionnaire, developed by the World HealthOrganization.Methods: Data used for the analysis come from the European Study of Mental Disorders(ESEMeD), a cross-sectional interview to a representative sample of the general population of 6 european countries (n=8796). Respondents were administered a modified version of theWHODAS-II, that measures functional disability in the previous 30 days in 6 differentdimensions: Understanding and Communicating; Self-Care, Getting Around, Getting Along withOthers, Life Activities and Participation. The questionnaire includes two types of items: 22severity items (5 points likert) and 8 frequency items (continuous). An Exploratory factoranalysis (EFA) with promax rotation was conducted on a random 50% of the sample. Theremaining half of the sample was used to perform a Confirmatory Factor Analysis (CFA) inorder to compare three different models: (a) the model suggested by the results obtained in theEFA; (b) the theoretical model suggested by the WHO with 6 dimensions; (c) a reduced modelequivalent to model b where 4 of the frequency items are excluded. Moreover, a second orderfactor was also evaluated. Finally, a CFA with covariates was estimated in order to evaluatemeasurement invariance of the items between Mediterranean and non-mediterranean countries.Results: The solution that provided better results in the EFA was that containing 7 factors. Twoof the frequency items presented high factor loadings in the same factor, and one of thempresented factor loadings smaller than 0.3 with all the factors. With regard to the CFA, thereduced model (model c) presented the best goodness of fit results (CFI=0.992,TLI=0.996,RMSEA=0.024). The second order factor structure presented adequate goodness of fit (CFI=0.987,TLI=0.991, RMSEA=0.036). Measurement non-invariance was detected for one of the items of thequestionnaire (FD20 ¿ Embarrassment due to health problems).Conclusions: AFC confirmed the initial hypothesis about the factorial structure of the WHODAS-II in 6factors. The second order factor supports the existence of a global dimension of disability. The use of 4of the frequency items is not recommended in the scoring of the corresponding dimensions.
Resumo:
We report on experiments aimed at comparing the hysteretic response of a Cu-Zn-Al single crystal undergoing a martensitic transition under strain-driven and stress-driven conditions. Strain-driven experiments were performed using a conventional tensile machine while a special device was designed to perform stress-driven experiments. Significant differences in the hysteresis loops were found. The strain-driven curves show reentrant behavior yield point which is not observed in the stress-driven case. The dissipated energy in the stress-driven curves is larger than in the strain-driven ones. Results from recently proposed models qualitatively agree with experiments.
Resumo:
We study a class of models of correlated random networks in which vertices are characterized by hidden variables controlling the establishment of edges between pairs of vertices. We find analytical expressions for the main topological properties of these models as a function of the distribution of hidden variables and the probability of connecting vertices. The expressions obtained are checked by means of numerical simulations in a particular example. The general model is extended to describe a practical algorithm to generate random networks with an a priori specified correlation structure. We also present an extension of the class, to map nonequilibrium growing networks to networks with hidden variables that represent the time at which each vertex was introduced in the system.
Resumo:
The need to construct bridges that last longer, are less expensive, and take less time to build has increased. The importance of accelerated bridge construction (ABC) technologies has been realized by the Federal Highway Administration (FHWA) and the Iowa Department of Transportation (DOT) Office of Bridges and Structures. This project is another in a series of ABC bridge projects undertaken by the Iowa DOT. Buena Vista County, Iowa, with the assistance of the Iowa Department of Transportation (DOT) and the Bridge Engineering Center (BEC) at Iowa State University, constructed a two-lane single-span precast box girder bridge, using rapid construction techniques. The design involved the use of precast, pretensioned components for the bridge superstructure, substructure, and backwalls. This application and demonstration represents an important step in the development and advancement of these techniques in Iowa as well as nationwide. Prior funding for the design and construction of this bridge (including materials) was obtained through the FHWA Innovative Bridge Research and Deployment (IBRD) Program. The Iowa Highway Research Board (IHRB) provided additional funding to test and evaluate the bridge. This project directly addresses the IBRD goal of demonstrating (and documenting) the effectiveness of innovative materials and construction techniques for the construction of new bridge structures. Evaluation of performance was formulated through comparisons with design assumptions and recognized codes and standards including American Association of State Highway and Transportation Officials (AASHTO) specifications.
Resumo:
Introduction: With the setting up of the newly Athlete's Biological Passport antidoping programme, novel guidelines have been introduced to guarantee results beyond reproach. We investigated in this context, the effect of storage time on the variables commonly measured for the haematological passport. We also wanted to assess for these variables, the within and between analyzer variations. Methods: Blood samples were obtained from top level male professional cyclists (27 samples for the first part of the study and 102 for the second part) taking part to major stage races. After collection, they were transported under refrigerated conditions (2 °C < T < 12 °C), delivered to the antidoping laboratory, analysed and then stored at approximately 4 °C to conduct analysis at different time points up to 72 h after delivery. A mixed-model procedure was used to determine the stability of the different variables. Results: As expected haemoglobin concentration was not affected by storage and showed stability for at least 72 h. Under the conditions of our investigation, the reticulocytes percentage showed a much better stability than previous published data (> 48 h) and the technical comparison of the haematology analyzer demonstrated excellent results. Conclusion: In conclusion, our data clearly demonstrate that as long as the World Anti-Doping Agency's guidelines are followed rigorously, all blood results reach the quality level required in the antidoping context.
Resumo:
As novas tecnologias de produção, processamento, difusão e exploração da informação digital modificaram profundamente as tradicionais práticas sobre o uso e a indústria da informação, das redes eletrônicas, das ferramentas e dos produtos de multimídia. O presidente da Association de Professionnels de l'Information et de la Documentation (ADBS) apresenta a posição atual de sua associação e de outros parceiros nacionais e internacionais, diante desse novo contexto. Além do direito do autor e do editor, deve-se considerar o direito do usuário ou consumidor (direito à informação, ao conhecimento, acesso a textos de lei, etc.). Fala-se em distinguir entre obra do autor e obra de informação. O novo direito sui generis protege produtos e serviços de informação (e. g., bases de dados) e busca construir um direito que protege o investimento econômico sem se apoiar no direito do autor. O uso legal (fair-use) das obras protegidas deve ser preservado, bem como o uso privado do copista, no novo ambiente eletrônico, e deverá também desempenhar um papel importante no futuro para garantir o desenvolvimento da democracia e do conhecimento. Diante de uma rápida mudança das tecnologias de produção, editoração e veiculação da informação, deve-se buscar um equilíbrio entre os direitos dos atores e dos espectadores da informação para o desenvolvimento do conhecimento e da democracia.