Efeito do tratamento por plasma na proliferação de fibroblastos e esterilização de membranas de quitosana

Chitosan is being studied for use as dressing due their biological properties. Aiming to expand the use in biomedical applications, chitosan membranes were modified by plasma using the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen (H2). The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, surface energy and water absorption test. Biological Tests were also performed, such as: test sterilization and proliferation of fibroblasts (3T3 line). Through SEM we observed morphological changes occurring during the plasma treatment, the formation of micro and nano-sized valleys. MFA was used to analyze different roughness parameters (Ra, Rp, Rz) and surface topography. It was found that the treated samples had an increase in surface roughness and sharp peaks. Methane plasma treatment decreased the hydrophilicity of the membranes and also the rate of water absorption, while the other treatments turned the membranes hydrophilic. The sterilization was effective in all treatment times with the following gases: Ar, N2 and H2. With respect to proliferation, all treatments showed an improvement in cell proliferation increased in a range 150% to 250% compared to untreated membrane. The highlights were the treatments with Ar 60 min, O2 60 min, CH4 15 min. Observing the results of the analyzes performed in this study, it appears that there is no single parameter that influences cell proliferation, but rather a set of ideal conditions that favor cell proliferation

Mycobacterium tuberculosis infection in women with unexplained infertility

Background: Genital tuberculosis (GTB) is an important cause of female infertility, especially in developing countries. The positive results of polymerase chain reaction (PCR) in endometrial GTB in the absence of tubal damage raise the possibility of the detection of sub-clinical or latent disease, with doubtful benefits of treatment. Objective: To evaluate the mycobacterium tuberculosis infection in endometrial biopsy samples collected from unexplained infertile women attending Yazd Research and Clinical Center for Infertility by using PCR techniques. Materials and Methods: In this cross sectional study, 144 infertile women with unexplained infertility aged 20-35 years old and normal Histro-saplango graphy findings were enrolled. Endometrial biopsy samples from each participant were tested for mycobacterium tuberculosis detecting by PCR. In 93 patients, peritoneal fluid was also taken for culture and PCR. Results: The PCR results of endometrial specimens were negative in all cases, demonstrating that there was no GTB infection among our patients. Conclusion: Our results showed that GTB could not be considered as a major problem in women with unexplained infertility. Although, studies have indicated that PCR is a useful method in diagnosing early GTB disease in infertile women with no demonstrable evidence of tubal or endometrial involvement.

Controlled surface nanotopography and oxygen plasma treatment of PEEK to improve cellular response

Poly(aryl-ether-ether-ketone) (PEEK) is a semi crystalline polymer which exhibits properties that make it an attractive choice for use as an implant material. It displays natural radiolucency, and MRI compatibility, as well as good chemical and sterilization resistance, both of which make it of particular interest in orthopaedic implants. However, PEEK has demonstrated poor cellular adhesion both in vitro and in vivo. This is problematic as implant surfaces that do not develop a layer of adhesive cells are at risk of undergoing fibrous encapsulation, which in turn leads to lack of a strong interface between the implant device and the patient tissue, which can in turn lead to failure of the implant and revision surgery . As incorporating nanotopography into a polymer surface has been demonstrated to be able to direct the differentiation behaviour of stem cells, a possible solution to PEEKs underlying issues with poor cellular response would be to incorporate specific nanoscale topography into the material surface through injection moulding, and then analysing if this is a viable method for addressing PEEKs issues with cellular response. In addition to nanoscale topography, the experimental PEEK surfaces were treated with oxygen plasma to address the underlying cytophobicity of the material. As this type of treatment has been documented to be capable of etching the PEEK surface, experiments were carried out to quantify the effect of this treatment, both on the ability of cells to adhere to the PEEK surface, as well as the effect it has upon the nanotopography present at the PEEK surface. The results demonstrated that there were a range of plasma treatments which would significantly improve the ability of cells to adhere to the PEEK surface without causing unacceptable damage to the nanotopography. Three different types of cells with osteogenic capacity were tested with the PEEK surfaces to gauge the ability of the topography to alter their behaviour: SAOS-2, osteoprogenitors and 271+ MSCs. Due to PEEKs material properties (it is non transparent, exhibits birefringence and is strongly autofluorescent) a number of histological techniques were used to investigate a number of different stages that take place in osteogenesis. The different cell types did display slightly different responses to the topographies. The SAOS-2 cells cultured on surfaces that had been plasma treated for 2 minutes at 200W had statistically significantly higher levels of von Kossa staining on the NSQ surface compared to the planar surface, and the same experiment employing alizarin red staining, showed a statistically significantly lower level of staining on the SQ surface compared to the planar surface. Using primary osteoprogenitor cells designed to look into if whether or not the presence of nanotopography effected the osteogenic response of these cells, we saw a lack of statistically significant difference produced by the surfaces investigated. By utilising HRP based immunostaining, we were able to investigate, in a quantitative fashion, the production of the two osteogenic markers osteopontin and osteocalcin by cells. When stained for osteocalcin, the SQ nanotopography had total percentage of the surface with stained material, average area and average perimeter all statistically significantly lower than the planar surface. For the cells that were stained for osteopontin, the SQ nanotopgraphy had a total percentage of the surface with stained material, average area and average perimeter all highly statistically significantly lower than those of the planar surface. Additionally, for this marker the NSQ nanotopography had average areas and average perimeters that were highly significantly higher than those of the planar surface. There were no significant differences for any of the values investigated for the 271+ MSC’s When plasma treatment was varied, the SAOS-2 cells demonstrated an overall trend i.e. increasing the energy of plasma treatment in turn leads to an increase in the overall percentage of staining. A similar experiment employing stem cells isolated from human bone marrow instead of SAOS-2 cells showed that for polycarbonate surfaces , used as a control, mineralization is statistically significantly higher on the NSQ nanopattern compared to the planar surface, whereas on the PEEK surfaces we observe the opposite trend i.e. the NSQ nanotopography having a statistically significantly lower amount of mineralization compared to the planar surface at the 200W 2min and 30W 1min plasma treatments. The standout trend from the PEEK results in this experiment was that the statistically significant differences on the PEEK substrates were clustered around the lower energy plasma treatments, which could suggest that the plasma treatment disrupted a function of the nanotopograhy which is why, as the energy increases, there are less statistically significant differences between the NSQ nanotopography and the Planar surface This thesis documents the response of a number of different types of cells to specific nanoscale topographies incorporated into the PEEK surface which had been treated with oxygen plasma. It outlines the development of a number of histological methods which measure different aspects of osteogenesis, and were selected to both work with PEEK, and produce quantitative results through the use of Cell Profiler. The methods that have been employed in this body of work would be of interest to other researchers working with this material, as well as those working with similarly autofluorescent materials.

Modelo predictivo para uso del condón y consumo de alcohol como conductas de riesgo relacionadas con el contagio de VIH/SIDA en trabajadoras sexuales de Bogotá- 2015

Objetivo: Determinar un modelo predictivo para uso del condón y consumo de alcohol como conductas de riesgo relacionadas el contagio de VIH/Sida en mujeres trabajadoras sexuales de la ciudad de Bogotá en el año 2015. Métodos Estudio de tipo transversal con diseño observacional, se tomaron 255 mujeres trabajadoras sexuales de la ciudad de Bogotá; La información analizada fue tomada del estudio realizado en cinco ciudades de Colombia en el año 2015, las hipótesis planteadas se soportaron en la asociación entre las condiciones sociodemográficas, de conocimiento, practicas, hábitos, apoyo social y de ocupación propia de las mujeres trabajadoras sexuales que podían explicar y predecir la adopción de conductas riesgosas para VIH/sida como son el uso del condón y el consumo de alcohol en ejercicio de su ocupación. Resultados El promedio de edad de inicio en el trabajo sexual fue 22,1±7,1 años, tres cuartas partes son solteras y residen en estrato dos y tres; el 96,5% dijo usar el condón con el último cliente y el 27,8% de ellas consumió alcohol durante su último servicio. En la conducta de riesgo uso del condón, se encontraron asociados entre otras, la edad [OR=1,10(1,03-1,17)], vivir en estrato dos [OR=7,7(1,5-39,5)], el ingreso por trabajo sexual [OR=1,0(1,0-1,0)], la disponibilidad del condón para el servicio [OR=0,03(0,008-0,16)] y contar con otro método de planificación (ligadura de trompas) [OR=4,47(1,0-18,3)]. En la conducta de riesgo consumo de alcohol, se encontró asociado ente otros: estrato socioeconómico dos [OR=5,8(1,54-22,3)], nivel de escolaridad secundaria [OR=0,12(0,16-0,96)], vivir con otros familiares [OR=3,45(1,7-7,02)], ingreso por trabajo sexual [OR=1,0(1,0-1,0)] y el sitio donde se ofrece el servicio [OR=0,07(0,04-0,15)]. Después de ajustar, se encontró que las variables que mejor explican el uso del condón fueron edad [OR=1,1(1,02-1,17)] y disponibilidad del condón [OR=0,04(0,008-0,024)], el modelo tuvo poca sensibilidad 33,3% y buena capacidad predictiva (84,6%). Las variables que mejor explicaron el consumo de alcohol durante el servicio fueron edad [OR= 0,95(0,91-0,98)], Número de clientes por semana [OR=0,9(0,90-0,98)], sitio donde ofrece el servicio [OR=7,1(3,45-14,8)], y estrato socioeconómico [OR=1,8 (0,90-3,83)], resultando un modelo con buena sensibilidad (71,8%) y buena capacidad predictiva (86,4%). Conclusiones Aspectos como la edad, el estrato socioeconómico, escolaridad, estado civil, ingreso económico por trabajo sexual, edad de inicio en el trabajo sexual, número de clientes antiguos en la última semana, disponibilidad del condón para prestar el servicio y ligadura de trompas como método diferente de planificación, se asociaron estadísticamente con el uso del condón. Sin embargo al ajustar las variables solo la edad y la disponibilidad del condón se mantuvieron como variables explicativas. Cabe anotar, que aunque el modelo mostró buena capacidad predictiva (84,6%), la precisión en sus estimaciones fue baja debido a la poca frecuencia del no uso del condón con el ultimo cliente (3,5%), y la sensibilidad del modelo apenas fue del 33,3%. Por otro lado, factores como la edad, el estrato socioeconómico, nivel educativo, ingreso económico, sitio de oferta del servicio, composición familiar, número de hijos, número de clientes atendidos en la última semana y número de clientes antiguos mostraron asociación estadística con el consumo de alcohol. Sin embargo, al ajustar las variables solo edad, estrato socioeconómico, sitio donde se ofrece el servicio y número de clientes por semana mantuvieron asociación estadística; observándose además que el estrato socioeconómico (uno y dos) y sitio donde se ofrece el servicio (establecimiento), son factores de riesgo para el consumo de alcohol en ejercicio de la ocupación y la poca edad y un número reducido de clientes por semana se comportan como factores de protección para el consumo de alcohol. El modelo predictivo que se desarrolló para la conducta de riesgo de consumo de alcohol, con una sensibilidad del 71,8% y un poder predictivo del 86,4%. .

Assessment of Injuries Caused by Anastrepha fraterculus (Wied.) (Diptera: Tephritidae) on the Incidence of Bunch Rot Diseases in Table Grape.

Resumo: Anastrepha fraterculus (. Wied) é a principal praga de uvas de mesa (Vitis vinifera) na Região Sul do Brasil. Neste estudo, o objetivo foi investigar o efeito da punção de frutas por fêmeas adultas e infestação larvária por A. fraterculus na ocorrência da doença podridões na uva (cultivar "Itália"). Abstract: Anastrepha fraterculus (Wied.) is the main insect pest of table grapes (Vitis vinifera) in the Southern Region of Brazil. In this study, we aimed to investigate the effect of fruit puncturing by adult females and larval infestation by A. fraterculus on the occurrence of bunch rot disease in the grape (cultivar ?Itália?) by evaluating grapes (a) punctured for oviposition by females of A. fraterculus, sterilized in laboratory with novaluron (40 mg L−1) and further spray-inoculated separately with Botrytis cinerea (1 × 106 conidia mL−1), Glomerella cingulata (1 × 106 conidia mL−1), and bacteria and yeast that cause sour rot (1 × 105 cells mL−1), (b) grapes punctured for oviposition by non-sterilized females with pathogen spraying, (c) grapes with mechanical wounds and pathogen spraying, (d) grapes with no wounds and with pathogen spraying, (e) grapes punctured for oviposition by A. fraterculus chemically sterilized in laboratory with novaluron, (f) grapes punctured for oviposition by A. fraterculus non-sterilized in laboratory with novaluron, (g) grapes with mechanical wounds, and (h) grapes with no sterilization or pathogen spraying. Our data indicated that the mechanical and oviposition wounds caused by A. fraterculus increased the percentage of grapes infected by B. cinerea, G. cingulata, and microorganisms of acid rot. The grape puncturing by A. fraterculus and the mechanical wound allows the penetration of B. cinerea and microorganisms leading to acid rot. We conclude that the fruit fly A. fraterculus may facilitate phytopathogens penetration leading to bunch rots in the table grape Itália.

Characterization Of Single Use Reactor Used For The Manufacturing Of Formulated Products Within The Pharmaceutical Industry

Mixing is a fundamental unit operation in the pharmaceutical industry to ensure consistent product quality across different batches. It is usually carried out in mechanically stirred tanks, with a large variety of designs according to the process requirements. A key aspect of pharmaceutical manufacturing is the extensive and meticulous cleaning of the vessels between runs to prevent the risk of contamination. Single-use reactors represent an increasing trend in the industry since they do not require cleaning and sterilization, reducing the need for utilities such as steam to sterilize equipment and the time between production batches. In contrast to traditional stainless steel vessels, single-use reactors consist of a plastic bag used as a vessel and disposed of after use. This thesis aims to characterize the fluid dynamics features and the mixing performance of a commercially available single-use reactor. The characterization employs a combination of various experimental techniques. The analysis starts with the visual observation of the liquid behavior inside the vessel, focusing on the vortex shape evolution at different impeller speeds. The power consumption is then measured using a torque meter to quantify the power number. Particle Image Velocimetry (PIV) is employed to investigate local fluid dynamics properties such as mean flow field and mean and rms velocity profiles. The same experimental setup of PIV is exploited for another optical measurement technique, the Planar Laser-Induced Fluorescence (PLIF). The PLIF measurements complete the characterization of the reactor with the qualitative visualization of the turbulent flow and the quantitative assessment of the system performance through the mixing time. The results confirm good mixing performances for the single-use reactor over the investigated impeller speeds and reveal that the filling volume plays a significant role in the fluid dynamics of the system.