First in vivo evaluation of the mutagenic effect of Brazilian green propolis by comet assay and micronucleus test

Propolis is a hive product containing chiefly beeswax and plant-derived substances such as resin and volatile compounds. Propolis has been used in various parts of the world as an antiseptic and wound healer since ancient times, and interest in the product has recently increased. Considering the lack of data concerning the in vivo mutagenicity of green propolis, the capacity of this natural product to cause damage to the DNA was evaluated, using the alkaline single-cell gel electrophoresis (SCGE) and micronucleus test, in the peripheral blood cells of mice. The doses tested by gavage were 1000, 1500 and 2000 mg/kg. Micronucleus and SCGE assays showed that green propolis caused an increase in the damage to DNA in the peripheral blood cells of mice. The polychromatic: normochromatic erythrocytes ratio was not statistically different from the negative control. Considering the doses and the results obtained in this study, the acute consumption of green propolis produced some mutagenic effects on the blood cells of mice. (C) 2008 Elsevier Ltd. All rights reserved.

End-to-end arterial anastomosis with fibrin glue in larger arteries: histology, hydroxyproline concentration and tensile strength study in carotids of rabbits

A anastomose arterial término-terminal é demorada, requer tempo prolongado de oclusão vascular e esta associada a necrose focal, infiltração leucocitária e, conseqüentemente, à fibrose e calcificação da parede arterial. A cola de fibrina é uma alternativa para a anastomose microvascular e pode evitar estas alterações com menor aderência aos tecidos vizinhos e melhor coaptação das bordas arteriais. OBJETIVO: Comparar o processo cicatricial de anastomoses convencionais com anastomoses feitas com cola de fibrina em artérias maiores. MÉTODOS: em 22 coelhos, ambas carótidas foram seccionadas transversalmente e reconstruídas por meio de anastomose término-terminal com 4 pontos simples de reparo e cola de fibrina de um lado (G1), e com 8 pontos separados do outro lado (G2). Após 3 e 15 dias, os animais foram destinados aleatoriamente para estudo de força tênsil concentração de hidroxiprolina (8 animais) e avaliação histológica das anastomoses (3 animais). As lâminas histológicas foram coradas pelo HE Masson e Picrossirius polarização (PSP). RESULTADOS: Após 3 e 15 dias a força tênsil aumenta em ambos os grupos, de 280,0± 32,6g para 432,2± 131,2g no Grupo 1 e de 221,4± 72,4g para 452,2± 132,0g no Grupo 2; sem diferença estatística entre os grupos em cada período. A concentração de hidroxiprolina expressa como razão hidroxiprolina/proteína, variou de 0,0816± 0,0651 para 0,0622± 0,0184 no Grupo 1 e de 0,0734± 0,0577 para 0,0460± 0,0271 no Grupo 2; sem diferença estatística entre os períodos e grupos. Os estudos histológicos mostraram discreto aumento das reações de inflamação e reparação no Grupo 2. A técnica PSP mostrou predomínio do colágeno tipo I em relação do colágeno tipo II nas anastomoses de ambos os grupos, sem diferença expressiva entre esses grupos. CONCLUSÃO: A anastomose com a cola de fibrina foi menos lesiva para a parede arterial do que a anastomose convencional. Mesmo usando menos pontos, as características de força tênsil e de cicatrização da anastomose com cola de fibrina foram similares em ambos os grupos. Os tempos de realização das anastomoses foram significativamente maiores do que na anastomose convencional.

Evaluation of cytokines concentration and percentage of survival of rabies virus-infected mice submitted to anti-rabies Vero-cell propagated vaccine and P-acnes

Previously, survival of rabies infection was shown to correlate with low IL-6 serum concentration in mice subjected to post-exposure treatment with the Fuenzalida Palacios rabies vaccine in conjunction with the immunomodulator Propionibacterium acnes, previously Corynebacterium parvum. Considering the substitution of the Fuenzalida Palacios rabies vaccine by the Vero cell raised anti-rabies vaccine in almost all countries, the objective of this work was to evaluate the survival and cytokine serum concentration of rabies virus-infected mice treated with P. acnes in conjunction with or the anti-rabies-VERO vaccine. For this, Swiss mice were experimentally infected with street rabies virus and subjected to vaccine and/or P. acnes following infection. Animals were killed at different times and serum was collected to evaluate cytokines. The greatest survival was observed in animals given one or two does of P. acnes in the absence of vaccination. Animals given anti-rabies VERO vaccine alone or with three doses of P. acnes had the second highest survival rate. The group that had the highest percentage of mortality also had the highest IL-6 concentration on the 10th day, a time correlating with clinical symptoms of the animals. The results reinforce the inefficacy of anti-rabies vaccine in only one dose as a post-exposure treatment irrespective of the type of vaccine used, the immunomodulation activity of P. acnes in rabies post-exposure treatment and suggest a role for IL-6 in rabies virus pathogenesis. (c) 2006 Elsevier B.V. All rights reserved.

Increased interleukin-10 associated with low IL-6 concentration correlated with greater survival rates in mice infected by rabies virus vaccinated against it and immunomodulated with P-acnes

Macrophage activity, cytokines serum concentration, serum neutralizing antibodies and lethality by rabies were evaluated in swiss mice experimentally infected with street rabies virus and submitted or not to antirabies vaccination and immunomodulation with P. acnes. Animals were killed at different times and serum was collected in order to evaluate cytokines concentration; peritonial and splenic macrophages were collected for macrophage activity evaluation. Greater survival rates higher IL-10 and low IL-6 serum concentration were observed in vaccinated animals treated using P. acnes. (C) 2004 Elsevier Ltd. All rights reserved.

Natural killer activity in mice infected with rabies virus and submitted to P-acnes (Propionibacterium acnes) as immunomodulator

The natural killer (NK) activity and lethality were evaluated in swiss mice experimentally infected with street rabies virus and submitted to immunomodulation by P. acnes (formerly Corynebacterium parvum). The infected animals were sacrificed at different times and spleen non-adherent cells were obtained through ficoll-hypaque gradient and depletion of glass-adherent cells. Immunosuppression was observed in rabies virus infected mice correlated with lower NK activity in clinically ill animals. Higher NK activity and percentual of survival were observed in the group submitted to P. acnes. The increased survival correlated with higher NK activity induced by P. acnes suggests a protective role of this natural barrier against rabies virus infection in mice. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Effect of acid etching time on demineralization of primary and permanent coronal dentin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hardness of heat-polymerized acrylic resins after disinfection and long-term water immersion

Statement of the problem. In selecting a disinfectant for dental prostheses, compatibility between the disinfectant and the type of denture base material must be considered to avoid adverse effects on the hardness of the acrylic resin.Purpose. This study investigated the hardness of 2 denture base resins after disinfection and long-term water immersion.Material and methods. Thirty-two disk-shaped specimens (13 mm in diameter and 8 mm thick) were fabricated from each resin (Lucitone 550 and QC-20), polished, stored in water at 37degreesC for 48 hours, and submitted to hardness tests (Vickers hardness number [VHN]) before disinfection. Disinfection methods included scrubbing with 4% chlorhexidine gluconate for 1 minute, immersion for 10 minutes in I of the tested disinfectant Solutions (n=8) (3.78% sodium perborate, 4% chlorhexidine gluconate, or 1% sodium hypochorite), and immersion in water for 3 minutes. The disinfection procedures were repeated 4 times, and 12 hardness measurements were made on each specimen. Control specimens (not disinfected) were stored in water for 56 minutes. Hardness tests (VHN) were also performed after 15, 30, 60, 90, and 120 days of storage in water. Statistical analyses of data were conducted with a repeated measures 3-way analysis of variance (ANOVA) and Tukey post-hoc test (alpha=.05).Results. Mean values +/- SD for Lucitone 550 (16.52 +/- 0.94 VHN) and QC-20 (9.61 +/- 0.62 VHN) demonstrated a significant (P<.05) decrease in hardness after disinfection, regardless of material and disinfectant solutions used (Lucitone 550: 15.25 +/- 0.74; QC-20: 8.09 +/- 0.39). However, this effect was reversed after 15 days of storage in water. Both materials exhibited a continuous increase (P<.05) in hardness values for up to 60 days of water storage, after which no significant change was observed.Conclusion. Within the limitations of this in vitro study, QC-20 and Lucitone 550 specimens exhibited significantly lower hardness values after disinfection regardless of the disinfectant solution used.

Influence of the Light-Curing Unit, Storage Time and Shade of a Dental Composite Resin on the Fluorescence

The aim of this study was to determine the influence of three light-curing units, storage times and colors of the dental composite resin on the fluorescence. The specimens (diameter 10.0 +/- 0.1 mm, thickness 1.0 +/- 0.1 mm) were made using a stainless steel mold. The mold was filled with the microhybrid composite resin and a polyethylene film covered each side of the mold. After this, a glass slide was placed on the top of the mold. To standardize the top surface of the specimens a circular weight (1 kg) with an orifice to pass the light tip of the LCU was placed on the top surface and photo-activated during 40 s. Five specimens were made for each group. The groups were divided into 9 groups following the LCUs (one QTH and two LEDs), storage times (immediately after curing, 24 hours, 7 and 30 days) and colors (shades: A(2)E, A(2)D, and TC) of the composite resin. After photo-activation, the specimens were storage in artificial saliva during the storage times proposed to each group at 37 C and 100% humidity. The analysis of variance (ANOVA) and Tukey's post-hoc tests showed no significant difference between storage times (immediately, 24 hours and 30 days) (P > 0.05). The means of fluorescence had difference significant to color and light-curing unit used to all period of storage (P < 0.05). The colors had difference significant between them (shades: A2D < A2E < TC) (P < 0.05). The Ultraled (LED) and Ultralux (QTH) when used the TC shade showed higher than Radii (LED), however to A2E shade and A2D shade any difference were found (P > 0.05).

The Influence of Calcium Chloride on the Setting Time, Solubility, Disintegration, and pH of Mineral Trioxide Aggregate and White Portland Cement with a Radiopacifier

This study evaluated the influence of addition of 10% calcium chloride (CaCl(2)) on the setting time, solubility, disintegration, and pH of white MTA (WMTA) and white Portland cement (WPC). A test of the setting time was performed following the #57 ADA specifications and a test of the final setting time according to the ASTM. For the solubility tests disintegration and pH, Teflon rings were filled with the cements and weighed after setting. After 24 h in a desiccator, they were once again weighed. Thereafter, they were immersed in MiliQ water for 24 and 72 h and 7, 14, and 28 days, with maintenance in the desiccator and weighing between periods. The pH of water in which the rings were immersed was measured immediately after contact with them and in the other periods. The addition of CaCl(2) provided a significant reduction (50%) in the initial setting time of cements. The final setting time of WMTA was reduced in 35.5% and the final setting time of WPC in 68.5%. The WMTA with CaCl(2) absorbed water and gained weight with time, except for in the 24-h period. The addition of CaCl(2) to the WPC reduced its solubility. The addition of CaCl(2) increased the pH of WMTA in the immediate period and at 24 and 72 h and for WPC in the immediate period and at 24 h. The addition of CaCl(2) to WMTA and WPC reduced the setting times and solubility of both and increased the pH of cements in the initial periods. (J Endod 2009;35:550-554)

Phytoplankton composition, dominance and abundance as indicators of environmental compartmentalization in Jurumirim Reservoir (Paranapanema River), São Paulo, Brazil

Patterns in the spatial and temporal composition, dominance and abundance of the phytoplankton community of the Jurumirim Reservoir (Brazil) were studied during one year at ten different sampling stations. The main phytoplankton associations were characterized by diatoms and blue-green algae, in distinctive patterns of dominance. The main species were Microcystis aeruginosa Kuetz, Anabaena circinalis Rabenhorst, A. spiroides Kleb., A. solitaria Kleb., Aulacoseira cf. italica Grunow and A. granulata (Ehr.) Simon. A high growth of Aulacoseira was observed in the upstream zones of the reservoir in spring, at the beginning of the seasonal rainy period. This growth was a response to increased flow rates and input of fresh nutrients by the main feeder rivers. A high concentration of blue-green algae, especially Anabaena circinalis and A. spiroides, was observed in winter (dry season) in the lacustrine part of the reservoir, towards the dam. These algae benefitted from the longer water retention times and greater internal circulation of nutrients in the absence of a thermocline at this time of the year. Among the Cyanophyceae, there was an alternation between M. aeruginosa, more abundant in summer, and Anabaena, dominant in autumn and winter. A conspicuous growth of Anabaena occurred in a diverticle of the reservoir, sheltered from the main advective processes that predominate in the central channel. Higher phytoplankton diversity was associated with the contact zone between riverine and lacustrine systems.

A controlled clinical trial on the effects of exercise on neuropsychiatric disorders and instrumental activities in women with Alzheimer's disease

OBJETIVO: Analisar os efeitos de seis meses de intervenção de um programa de atividade física sobre os distúrbios neuropsiquiátricos e o desempenho nas atividades instrumentais da vida diária de idosos com Doença de Alzheimer (DA). MÉTODOS: Foram recrutados 20 pacientes nos estágios entre leve e moderado da DA. Segundo o escore clínico de demência (CDR), foram distribuídos em dois grupos: o grupo treinamento (GT), composto por dez mulheres que participaram de um program de exercícios físicos por um período de seis meses, e o grupo controle (GC), composto por dez outras participantes que não realizaram nenhum tipo de intervenção motora estruturada durante o mesmo período. Todas as participantes foram avaliadas por meio do Miniexame do Estado Mental, para obtenção da caracterização cognitiva; Inventário Neuropsiquiátrico, para identificação dos distúrbios neuropsiquiátricos mais prevalentes e Questionário de Atividades Instrumentais de Pfeffer, para verificação do grau de comprometimento funcional. RESULTADOS: Os participantes do GC mostraram uma deterioração tanto no desempenho das atividades instrumentais quanto na intensificação dos distúrbios neuropsiquiátricos, quando comparados os momentos pré e pós-intervenção. CONCLUSÃO: O GT demonstrou uma atenuação da intensificação dos distúrbios neuropsiquiátricos e do desempenho funcional em relação ao grupo sedentário.

Implications of obesity for tendon structure, ultrastructure and biochemistry: A study on Zucker rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytogenetics and embryology of Eupatorium laevigatum (Compositae)

Embryological studies indicate Eupatorium laevigatum to have Antennaria type diplospory with precocious embryony. The embryo sac is of the Polygonum type and the polar nuclei fuse before anthesis (maturation of the stamens). Endosperm development is autonomous and the central cell divides only after the initial stages of embryo formation. It is estimated that about 10% of the florets in anthesis contain an undivided egg which can be used for sexual reproduction. The study of microsporogenesis revealed abnormalities in chromosome pairing which result in the formation of univalents, bivalents, trivalents and higher polyvalents, with the consequent production of lagging chromosomes, unbalanced nuclei, micronuclei and sterile pollen. We found that, as represented by the material studied, E. laevigatum is an autohexaploid (2n = 6x = 60) in which each chromosome of a basic set of ten chromosomes is repeated six times and that E. laevigatum is an essentialy obligate apomictic.

Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading

Objectives. This study evaluated the effect of thermal- and mechanical-cycling on the shear bond strength of three low-fusing glassy matrix dental ceramics to commercial pure titanium (cpTi) when compared to conventional feldspathic ceramic fused to gold alloy.Methods. Metallic frameworks (diameter: 5 min, thickness: 4 mm) (N = 96, n = 12 per group) were cast in cpTi and gold alloy, airborne particle abraded with 150 mu m aluminum oxide. Low-fusing glassy matrix ceramics and a conventional feldspathic ceramic were fired onto the alloys (thickness: 4mm). Four experimental groups were formed; Gr1 (control group): Vita Omega 900-Au-Pd alloy; Gr2: Ticeram-cpTi; Gr3: Super Porcelain Ti-22-cpTi and G4: Vita Titankeramik-cpTi. While half of the specimens from each ceramic-metal combination were randomly tested without aging (water storage at 37 C for 24h only), the other half were first thermocycled (6000 cycles, between 5 and 55 C, dwell time: 13 s) and then mechanically loaded (20,000 cycles under SON load, immersion in distilled water at 37 C). The ceramic-alloy interfaces were loaded under shear in a universal test machine (cross-head speed: 0.5 mm/min) until failure occur-red. Failure types were noted and the interfaces of the representative fractured specimens from each group were examined with stereo microscope and scanning electron microscope (SEM). in an additional study (N = 16, n = 2 per group), energy dispersive X-ray spectroscopy (EDS) analysis was performed from ceramic-alloy interfaces. Data were analyzed using ANOVA and Tukey's test.Results. Both ceramic-metal combinations (p < 0.001) and aging conditions (p < 0,001) significantly affected the mean bond strength values. Thermal- and mechanical-cycling decreased the bond strength (MPa) results significantly for Gr3 (33.4 +/- 4.2) and Gr4 (32.1 +/- 4.8) when compared to the non-aged groups (42.9 +/- 8.9, 42.4 +/- 5.2, respectively). Gr1 was not affected significantly from aging conditions (61.3 +/- 8.4 for control, 60.7 +/- 13.7 after aging) (p > 0.05). Stereomicroscope images showed exclusively adhesive failure types at the opaque ceramic-cpTi interfacial zone with no presence of ceramic on the substrate surface but with a visible dark titanium oxide layer in Groups 2-4 except Gr1 where remnants of bonder ceramic was visible. EDS analysis from the interfacial zone for cpTi-ceramic groups showed predominantly 34.5-85.1% O(2) followed by 1.1-36.7% Aland 0-36.3% Si except for Super Porcelain Ti-22 where a small quantity of Ba (1.4-8.3%), S (0.7%) and Sn (35.3%) was found. In the Au-Pd alloy-ceramic interface, 56.4-69.9% O(2) followed by 15.6-26.2% Si, 3.9-10.9% K, 2.8-6% Na, 4.4-9.6% Al and 0-0.04% Mg was observed.Significance. After thermal-cycling for 6000 times and mechanical-cycling for 20,000 times, Triceram-cpTi combination presented the least decrease among other ceramic-alloy combinations when compared to the mean bond strength results with Au-Pd alloy-Vita Omega 900 combination. (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Cosmic microwave background and large-scale structure constraints on a simple quintessential inflation model

We derive constraints on a simple quintessential inflation model, based on a spontaneously broken Phi(4) theory, imposed by the Wilkinson Microwave Anisotropy Probe three-year data (WMAP3) and by galaxy clustering results from the Sloan Digital Sky Survey (SDSS). We find that the scale of symmetry breaking must be larger than about 3 Planck masses in order for inflation to generate acceptable values of the scalar spectral index and of the tensor-to-scalar ratio. We also show that the resulting quintessence equation of state can evolve rapidly at recent times and hence can potentially be distinguished from a simple cosmological constant in this parameter regime.