Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Dual path: a concept to improve the esthetic replacemente of missing anterior teeth with removable partial denture

The dual path of insertion concept for removable partial denture (RPD) design may be used in esthetically demanding situations. When compared to conventional RPDs, the main advantage of this design is the minimal use of clasps. This clinical report describes the treatment of a patient with an anterior maxillary edentulous area using a dual path RPD. The diagnostic cast was surveyed to ensure the adequacy of the undercuts on the mesial surfaces of the anterior abutments, where rigid minor connectors were placed. Inverted V-shaped canine cingulum rest seats were prepared to provide resistance to tooth movement during function. The dual path RPD concept allows excellent esthetic results, minimizes tooth preparation, and reduces the tendency toward plaque accumulation in a Kennedy class IV partially edentulous arch.

Surface Ocean CO2 Atlas (SOCAT) V1.4

A well-documented, publicly available, global data set of surface ocean carbon dioxide (CO2) parameters has been called for by international groups for nearly two decades. The Surface Ocean CO2 Atlas (SOCAT) project was initiated by the international marine carbon science community in 2007 with the aim of providing a comprehensive, publicly available, regularly updated, global data set of marine surface CO2, which had been subject to quality control (QC). Many additional CO2 data, not yet made public via the Carbon Dioxide Information Analysis Center (CDIAC), were retrieved from data originators, public websites and other data centres. All data were put in a uniform format following a strict protocol. Quality control was carried out according to clearly defined criteria. Regional specialists performed the quality control, using state-of-the-art web-based tools, specially developed for accomplishing this global team effort. SOCAT version 1.5 was made public in September 2011 and holds 6.3 million quality controlled surface CO2 data points from the global oceans and coastal seas, spanning four decades (1968-2007). Three types of data products are available: individual cruise files, a merged complete data set and gridded products. With the rapid expansion of marine CO2 data collection and the importance of quantifying net global oceanic CO2 uptake and its changes, sustained data synthesis and data access are priorities.

Los paisajes topográficos ocultos en los mapas : El caso de Godoy Bonnet en la Dirección de Minas, Geología e Hidrología

Este trabajo intenta reconstruir las prácticas visuales de relevamiento de los topógrafos de la Dirección de Minas. En este caso analizaremos los materiales visuales que realizó Felipe E. Godoy Bonnet para la realización de la Hoja topográfica Sierra Apeleg (1980). En el proceso de construcción de la cartografía topográfica encontramos distintas instancias: gabinete / precampo, campo y gabinete / poscampo. En cada una de ellas, el topógrafo es capaz de construir diferentes tipos de paisajes, aunque todos remitan al mismo espacio. En la primera de estas etapas, el topógrafo comienza a visualizar mentalmente un paisaje (paisaje topográfico imaginado) a partir de la observación de materiales cartográficos recopilados antes de aventurarse en el terreno. En la segunda, ya en el campo, el topógrafo activa su agudeza visual para reconstruir y reformular el paisaje previamente imaginado y lo completa con datos empíricos (paisaje topográfico medido). En la etapa de trabajo de poscampo, se comienza a dibujar -en lenguaje cartográfico- el paisaje que imaginó, vio y midió el topógrafo (paisaje topográfico dibujado). Una vez terminado el trabajo, cualquier observador entrenado en los códigos cartográficos puede decodificar y leer el mapa, dar volumen a las líneas de nivel y (re)construir un nuevo paisaje topográfico imaginado (ya que el mapa se puede convertir en un insumo para ir a relevar nuevamente el terreno). Intentamos establecer los primeros lineamientos para pensar qué son los paisajes topográficos, la variedad de registros que implican, los lenguajes que articulan y cómo es el proceso que ayuda a su construcción. A su vez, pensamos que la construcción de los paisajes topográficos varía a lo largo del proceso cartográfico y de sus lecturas posteriores. Esas variaciones pueden ser pensadas en términos de un agenciamiento, como lo propone Alfred Gell (1997).

Los paisajes topográficos ocultos en los mapas : El caso de Godoy Bonnet en la Dirección de Minas, Geología e Hidrología

Este trabajo intenta reconstruir las prácticas visuales de relevamiento de los topógrafos de la Dirección de Minas. En este caso analizaremos los materiales visuales que realizó Felipe E. Godoy Bonnet para la realización de la Hoja topográfica Sierra Apeleg (1980). En el proceso de construcción de la cartografía topográfica encontramos distintas instancias: gabinete / precampo, campo y gabinete / poscampo. En cada una de ellas, el topógrafo es capaz de construir diferentes tipos de paisajes, aunque todos remitan al mismo espacio. En la primera de estas etapas, el topógrafo comienza a visualizar mentalmente un paisaje (paisaje topográfico imaginado) a partir de la observación de materiales cartográficos recopilados antes de aventurarse en el terreno. En la segunda, ya en el campo, el topógrafo activa su agudeza visual para reconstruir y reformular el paisaje previamente imaginado y lo completa con datos empíricos (paisaje topográfico medido). En la etapa de trabajo de poscampo, se comienza a dibujar -en lenguaje cartográfico- el paisaje que imaginó, vio y midió el topógrafo (paisaje topográfico dibujado). Una vez terminado el trabajo, cualquier observador entrenado en los códigos cartográficos puede decodificar y leer el mapa, dar volumen a las líneas de nivel y (re)construir un nuevo paisaje topográfico imaginado (ya que el mapa se puede convertir en un insumo para ir a relevar nuevamente el terreno). Intentamos establecer los primeros lineamientos para pensar qué son los paisajes topográficos, la variedad de registros que implican, los lenguajes que articulan y cómo es el proceso que ayuda a su construcción. A su vez, pensamos que la construcción de los paisajes topográficos varía a lo largo del proceso cartográfico y de sus lecturas posteriores. Esas variaciones pueden ser pensadas en términos de un agenciamiento, como lo propone Alfred Gell (1997).

Annotated record of the detailed examination of Mn deposits from R/V Bosei Maru Cruise GH72-2 stations

In 1972, the five years program 'Basic investigations for exploration of deep sea mineral resources' was laid out by the Agency of Industrial Science and Technology, Ministry of International Trade and Industry. The Geological Survey of Japan and the National Research Institute of Pollution and Resources undertook the first survey project. The survey team consisted of four geologists and a surveyor of the Geological Survey of Japan, and a mechanical, engineer and four mining engineers of National Research Institute of Polution and Resources. The survey started on November 11 using the "Bosei Maru" survey vessel (1100 tons) chartered from Tokai University. The cruise departed from Shimizu harbor to the Ponape and Guam islands, and terminated at the harbor of departure on December 11. The surveyed area was mainly covered the Mariana basin and the Magellan seamounts, and fifteen bottom samples were collected during the cruise. Ferromanganese nodules were obtained at several stations at a depth over 5000m.

Physical oceanography and processed 2 minutes-averaged continuous VM-ADCP profiles during POLARSTERN cruise ANT-XXVIII/3

The physical and biological carbon pumps in the different hydrographic and biogeochemical regimes of the Atlantic Sector of the Southern Ocean are controlled by a series of coupled physical, chemical and biological processes and a project named Eddy-Pump was designed to study them. The Eddy Pump field campaign was carried out during RV Polarstern Cruise ANT-XXVIII/3 between January and March 2012. Particular emphasis was laid on the differences which occur along the axis of the Antarctic Circumpolar Current (ACC) with its associated mesoscale eddy field. The study sites were selected in order to represent (1) the central ACC with its regular separation in different frontal jets, investigated by a meridional transect along 10°E; (2) a large-scale bloom west of the Mid-Atlantic Ridge which lasted several months with conspicuous chlorophyll-poor waters to its immediate east studied by a three-dimensional mesoscale survey centred at 12°40'W; and (3) the Georgia Basin north of the island of South Georgia, which regularly features an extended and dense phytoplankton bloom, was investigated by a mesoscale survey centred at 38°12'W. While Eddy-Pump represents an interdisciplinary project by design, we here focus on describing the variable physical environment within which the different biogeochemical regimes developed. For describing the physical environment we use measurements of temperature, salinity and density, of mixed-layer turbulence parameters, of dynamic heights and horizontal current vectors, and of flow trajectories obtained from surface drifters and submerged floats. This serves as background information for the analyses of biological and chemical processes and of biogeochemical fluxes addressed by other papers in this issue. The section along 10°E between 44°S and 53°S showed a classical ACC structure with well-known hydrographic fronts, the Subantarctic Front (SAF) at 46.5°S, the Antarctic Polar Front (APF) split in two, at 49.25°S and 50.5°S, and the Southern Polar Front (SPF) at 52.5°S. Each front was associated with strong eastward flows. The West Mid-Atlantic Ridge Survey showed a weak and poorly resolved meander structure between the APF and the SPF. During the first eight days of the survey the oceanographic conditions at the Central Station at 12°40'W remained reasonably constant. However after that, conditions became more variable in the thermocline with conspicuous temperature inversions and interleavings and also a decrease in temperature in the surface layer. At the very end of the period of observation the conditions in the thermocline returned to being similar to those observed during the early part of the period with however the mixed layer temperature raised. The period of enhanced thermohaline variability was accompanied by increased currents. The Georgia Basin Survey showed a very strong zonal jet at its northern edge which connects to a large cyclonic meander that itself joins an anticyclonic eddy in the southeastern quadrant. The water mass contrasts in this survey were stronger than in the West Mid-Atlantic Ridge Survey, but similar to those met along 10°E with the exception that the warm and saline surface water typical of the northern side of the SAF was not covered by the Georgia Basin Survey. Mixed layers found during Eddy-Pump were typically deep, but varied between the three survey areas; the mean depths and standard variations of the mixed layer along the 10°E were 77.2±24.7 m, at the West Mid-Atlantic Ridge 66.7±17.7 m, and in the Georgia Basin 36.8±10.7 m.

Exploring Habitability Markers, Biosignatures, and Their False Positives Using Spectral Models of Terrestrial Exoplanets

Thesis (Ph.D.)--University of Washington, 2016-08

Gillette's map of Oneida Co., New York : from actual surveys /

County cadastral wall map showing towns (townships), numbered town survey divisions, irregular rural property tracts, rural buildings, and rural householders' names.

Map of marsh lots 10, 11, 12, 13, 14, and 15 at Rockaway Beach, borough of Queens, city of New York, N.Y. /

Cadastral survey map showing lot lines, lot nos., dimensions, acreages, and proposed streets.

Map of valuable property in the 6th ward of the city of Brooklyn belonging to John Dikeman & others to be sold by Franklin & Jenkins on Monday, 29th August, 1836 at 12 o'colck at their sales room, 15 Broad St.

Scale not given.

City of Troy, N.Y. : from actual surveys /

City cadastral street map showing lot/tract lines, lot numbers, names of owners of rural tracts, building coverage, ward boundaries, and ward numbers.

Plan submitted for the alteration of the streets and av. around the Capitol : consequent upon its extension /

Oriented with north to the right.