Characterization of Carbon Molecular Sieve Membranes Supported on Ceramic Tubes

Carbon molecular sieve membranes have been analyzed in supported and unsupported configurations in this experimental study. The membranes were used to adsorb CO2, N2 and CH4, and their adsorption data were analyzed to establish differences in rate and capacity of adsorption between the two types of samples (supported and unsupported). Experimental results show an important effect of the support, which can be considered as an additional parameter to tailor pore size on these carbon membranes. Immersion calorimetry values were measured by immersing the membranes into liquids of different molecular dimensions (dichloromethane, benzene, n-hexane, 2,2-dimethylbutane). Similarities were found between adsorption and calorimetric analysis. The pore volume of the samples analyzed ranged from 0.016 to 0.263 cm3/g. The effect of the pyrolysis temperature, either 550 or 700 °C, under N2 atmosphere was also analyzed. Quantification of the pore-size distribution of the support was done by liquid-liquid displacement porosimetry. The composite membrane was used for CO2/CH4 separation before and after pore plugging was done. The ideal selectivity factors value (4.47) was over the Knudsen theoretical factor (0.60) for membrane pyrolyzed at 600 °C, which indicates the potential application of these membranes for the separation of low-molecular weight gases.

Pursuing Chemical Efficiency by Using Supported Organocatalysts for Asymmetric Reactions under Aqueous Conditions

Over the past decade, a great effort has been made by the chemical community to improve the efficiency of organic transformations and allow sustainable processes. Merging the use of supported and recyclable organocatalysts and aqueous conditions for the asymmetric synthesis of valuable molecules, has led to outstanding contributions in the area of green chemistry. Recent progresses in the field include the implementation of these methodologies in the large scale production of chiral molecules using automated flow chemistry.

Azerbaijan-a growing problem for the West. OSW Commentary No. 146, 15.09.2014

Azerbaijan’s cooperation with the West, launched two decades ago, has helped it become a relatively strong and ambitious actor on the international stage. It has become a key country in the region from the Western (USA and the EU) and Turkish points of view, as well as an important partner in the energy sector. The strategic EU concept of the Southern Gas Corridor, also supported by the United States, is among the initiatives based on cooperation with Azerbaijan. Surprisingly, however, Azerbaijan’s increased ambition and importance have caused its policy to diverge ever farther from the expectations and plans formulated by the West. The changes in the balance of power in the South Caucasus, occurring in the context of the conflict in Ukraine, have forced Azerbaijan to revise its assessment of its position in the region. The main impetus for Azerbaijan’s actions is fear of Russia, as well as the weakness of the West which has become particularly apparent in the recent stages of the Ukrainian crisis. Azerbaijan’s actions so far have displayed its tendency to deepen its self-isolation in foreign affairs and consolidate its authoritarian system. This comes as a challenge to the West, whose ability to shape its relations with Azerbaijan has weakened considerably. This state of affairs poses the threat that in the current situation, the Southern Gas Corridor concept, which Azerbaijan amended in 2012 in its own favour, might become totally blocked.

Egypt: Changes and Challenges of Political Transition. MEDPRO Technical Report No. 4/May 2011

Hosni Mubarak’s regime and its power system enjoyed remarkable stability for over 30 years. On 11 February 2011, after 18 days of mass protests, the Egyptian president was forced to step down, revealing the unsustainability of the political and economic system that had ensured his continuity for so long. While the revolution of January 25th led to a major success – the fall of Hosni Mubarak – Egypt’s political future is still opaque and exposed to a number of risks. This paper first highlights the factors underpinning the former stability of Mubarak’s regime; it then assesses the causes of its underlying unsustainability, leading to the anti-government popular mobilisation in January-February 2011 and the removal of Mubarak; finally the paper evaluates the prospects for a genuine democratic transition in Egypt, by looking at the main political and socio-economic challenges facing the country.

Controlled ‘Europeanisation’? The KMW–Nexter merger and the Germany’s new strategy for the arms industry. OSW COMMENTARY NUMBER 180/26.08.2015

On 29 July a deal was signed in Paris concerning a merger between Krauss-Maffei Wegmann (KMW), Germany’s largest manufacturer of tanks, infantry fighting vehicles and artillery systems, and its French counterpart Nexter. The new holding formed as a result of the merger will be Europe’s largest producer of arms systems for land forces, comparable to the Airbus Group in the aerospace industry. While work on finalising the merger was underway, the German government was developing a new strategy for Germany’s arms industry, which was published on 9 June 2015. The strategy’s provisions show that German politicians, despite holding negative opinions on previous mergers between German arms companies and foreign businesses, have concluded that consolidation at the European level is nonetheless the only way to go. However, the strategy also states that the German government should exercise more influence than previously on the terms and conditions of any such consolidation. To this end, it identified key national technologies which will be supported and protected through various instruments, including also the conclusion of intergovernmental agreements on strategic defence co-operation. Such agreements may regulate questions such as the ownership structures of the new companies, the locations for developing technologies and for manufacturing products, subcontractors and exports of jointly developed arms and military equipment. In relation to the KMW–Nexter merger, such a deal between France and Germany is expected to be signed this autumn.

Three-Dimensional Structure and Disposition of the Air Conducting and Gas Exchange Conduits of the Avian Lung: The Domestic Duck (Cairina moschata)

The anatomy of the domestic duck lung was studied macroscopically, by casting and by light, transmission, and scanning electron microscopy. The lung had four categories of secondary bronchi (SB), namely, the medioventral (MV, 4-5), laterodorsal (LD, 6-10), lateroventral (LV, 2-4), and posterior secondary bronchi (PO, 36-44). The neopulmonic parabronchi formed an intricate feltwork on the ventral third of the lung and inosculated those from the other SB. The lung parenchyma was organized into cylindrical parabronchi separated by thin septa containing blood vessels. Atria were shallow and well-fortified by epithelial ridges reinforced by smooth muscle bundles and gave rise to 2-6 elongate infundibulae. Air capillaries arose either directly from the atria or from infundibulae and were tubular or globular in shape with thin interconnecting branches. The newly described spatial disposition of the conducting air conduits closely resembles that of the chicken. This remarkable similarity between the categories, numbers, and 3D arrangement of the SB in the duck and chicken points to a convergence in function-oriented design. To illuminate airflow dynamics in the avian lung, precise directions of airflow in the various categories of SB and parabronchi need to be characterized.

Helium in solubility equilibrium with quartz and porefluids in rocks - a new approach in hydrology

Quartz crystals in sandstones at depths of 1200 m–1400 m below the surface appear to reach a solubility equilibrium with the 4He-concentration in the surrounding pore- or groundwater after some time. A rather high 4Heconcentration of 4.5x10E-3 cc STP 4He/cm3 of water measured in a groundwater sample would for instance maintain a He pressure of 0.47 atm in a related volume. This value is equal within analytical error to the pressure deduced from the measured helium content of the quartz and its internal helium-accessible volume. To determine this volume, quartz crystals of 0.1 to 1 mm were separated from sandstones and exposed to a helium gas pressure of 32 atm at a temperature of 290°C for up to 2 months. By crushing, melting or isothermal heating the helium was then extracted from the helium saturated samples. Avolume on the order of 0.1% of the crystal volume is only accessible to helium atoms but not to argon atoms or water molecules. By monitoring the diffusive loss of He from the crystals at 350°C an effective diffusion constant on the order of 10E-9 cm2/s is estimated. Extrapolation to the temperature of 70°C in the sediments at a depth of 1400 m gives a typical time of about 100 000 years to reach equilibrium between helium in porewaters and the internal He-accessible volume of quartz crystals. In a geologic situation with stagnant pore- or groundwaters in sediments it therefore appears to be possible with this new method to deduce a 4He depth profile for porewaters in impermeable rocks based on their mineral record.

Mesocosm experiment on warming and acidification effects on phytoplankton composition and cell size

While the isolated responses of marine phytoplankton to climate warming and to ocean acidification have been studies intensively, studies on the combined effect of both aspects of Global Change are still scarce. Therefore, we performed a mesocosm experiment with a factorial combination of temperature (9 and 15°C) and pCO2 (560 ppm and 1400 ppm) with a natural autumn plankton community from the western Baltic Sea. Temporal trajectories of total biomass and of the biomass of the most important higher taxa followed similar patterns in all treatments. When averaging over the entire time course, phytoplankton biomass decreased with warming and increased with CO2 under warm conditions. The contribution of the two dominant higher phytoplankton taxa (diatoms and cryptophytes) and of the 4 most important species (3 diatoms, 1 cryptophyte) did not respond to the experimental treatments. Taxonomic composition of phytoplankton showed only responses at the level of subdominant and rare species. Phytoplankton cell sizes increased with CO2 addition and decreased with warming. Both effects were stronger for larger species. Warming effects were stronger than CO2 effects and tended to counteract each other. Phytoplankton communities without calcifying species and exposed to short-term variation of COO2 seem to be rather resistant to ocean acidification.

Tracts, legal and historical, with other antiquarian matter chiefly relative to Scotland.

I. Reply to Mr. Tytler's historical remarks on the death of Richard II.--II. Observations upon the representation of the Rusky and Lennox families, and other points in Mr. Napier's Memoirs of Merchiston.--III. Remarks upon the law of legitimation per subsequens matrimonium, the nature of our ancient canons, and question of the legitimacy of the Stewarts.

Approaches and Strategy for Cancer Research and Surveillance Data: Integration, Information Pipeline, Data Models, and Informatics Opportunities

Thesis (Ph.D.)--University of Washington, 2016-04

Comparative adsorption of spherical argon and flexible n-butane in carbon slit pores - a GCMC computer simulation study

In this paper we investigate the difference between the adsorption of spherical molecule argon (at 87.3 K) and the flexible normal butane (at an equivalent temperature of 150 K) in carbon slit pores. These temperatures are equivalent in the sense that they have the same relative distances between their respective triple points and critical points. Higher equivalent temperatures are also studied (122.67 K for argon and 303 K for n-butane) to investigate the effects of temperature on the 2D-transition in adsorbed density. The Grand Canonical Monte Carlo simulation is used to study the adsorption of these two model adsorbates. Beside the longer computation times involved in the computation of n-butane adsorption, n-butane exhibits many interesting behaviors such as: (i) the onset of adsorption occurs sooner (in terms of relative pressure), (ii) the hysteresis for 2D- and 3D-transitions is larger, (iii) liquid-solid transition is not possible, (iv) 2D-transition occurs for n-butane at 150 K while it does not happen for argon except for pores that accommodate two layers of molecules, (v) the maximum pore density is about four times less than that of argon and (vi) the sieving pore width is slightly larger than that for argon. Finally another feature obtained from the Grand Canonical Monte Carlo (GCMC) simulation is the configurational arrangement of molecules in pores. For spherical argon, the arrangement is rather well structured, while for n-butane the arrangement depends very much on the pore size. (C) 2004 Elsevier B.V. All rights reserved.

Theoretical and numerical analysis of large-scale heat transfer problems with temperature-dependent pore-fluid densities

Purpose - In many scientific and engineering fields, large-scale heat transfer problems with temperature-dependent pore-fluid densities are commonly encountered. For example, heat transfer from the mantle into the upper crust of the Earth is a typical problem of them. The main purpose of this paper is to develop and present a new combined methodology to solve large-scale heat transfer problems with temperature-dependent pore-fluid densities in the lithosphere and crust scales. Design/methodology/approach - The theoretical approach is used to determine the thickness and the related thermal boundary conditions of the continental crust on the lithospheric scale, so that some important information can be provided accurately for establishing a numerical model of the crustal scale. The numerical approach is then used to simulate the detailed structures and complicated geometries of the continental crust on the crustal scale. The main advantage in using the proposed combination method of the theoretical and numerical approaches is that if the thermal distribution in the crust is of the primary interest, the use of a reasonable numerical model on the crustal scale can result in a significant reduction in computer efforts. Findings - From the ore body formation and mineralization points of view, the present analytical and numerical solutions have demonstrated that the conductive-and-advective lithosphere with variable pore-fluid density is the most favorite lithosphere because it may result in the thinnest lithosphere so that the temperature at the near surface of the crust can be hot enough to generate the shallow ore deposits there. The upward throughflow (i.e. mantle mass flux) can have a significant effect on the thermal structure within the lithosphere. In addition, the emplacement of hot materials from the mantle may further reduce the thickness of the lithosphere. Originality/value - The present analytical solutions can be used to: validate numerical methods for solving large-scale heat transfer problems; provide correct thermal boundary conditions for numerically solving ore body formation and mineralization problems on the crustal scale; and investigate the fundamental issues related to thermal distributions within the lithosphere. The proposed finite element analysis can be effectively used to consider the geometrical and material complexities of large-scale heat transfer problems with temperature-dependent fluid densities.

Family violence: Walking the tight rope between maternal alienation and child safety

Mothers are often alienated from their children when child abuse is suspected or confirmed, whether she is the primary abuser of the child or not. An abusive or violent partner often initiates the process of maternal alienation from children as a control mechanism. When the co-occurrence of maternal and child abuse is not recognised, nurses and health professionals risk further alienating a mother from her children, which can have detrimental effects in both the short and long term. Evidence shows that when mothers are supported and have the necessary resources there is a reduction in the violence and abuse she and her children experience; this occurs even in situations where the mother is the primary abuser of her children. The family-centred care philosophy, which is widely accepted as the best approach to nursing care for children and their families, creates tension for nurses caring for children who are the victims of abuse as this care generally occurs away from the context of the family. This fragmented approach to caring for abused children can inadvertently undermine the mother-child relationship and further contribute to maternal alienation. This paper discusses the complexity of family violence for nurses negotiating the 'tight rope' between the prime concern for the safety of children and further contributing to maternal alienation, within a New Zealand context. The premise that restoration of the mother-child relationship is paramount for the long-term wellbeing of both the children and the mother provides the basis for discussing implications for nursing practice.

How to write successful business and management essays

How to Write Successful Business and Management Essays is a systematic guide to successfully producing written work for business and management degrees. The authors address the all too common pitfalls of essay assignments, as well as providing students with a step-by-step programme to approach essay questions, both in coursework and exam contexts. Starting with the basics this book helps develop skills through the use of examples, exercises and checklists. Helpful features include: - Annotated essay examples, showing both good and bad points - Tips on time management and motivation, note taking and effective reading - Final checklists to use before you hand in - Explanation of what the markers are looking for – and how to give it to them Many students find referencing particularly confusing so the book provides detailed but easy-to-use information on what referencing is and how to do it properly.

Modelling tribology of slider and disk in a computer hard drive system

Issues of wear and tribology are increasingly important in computer hard drives as slider flying heights are becoming lower and disk protective coatings thinner to minimise spacing loss and allow higher areal density. Friction, stiction and wear between the slider and disk in a hard drive were studied using Accelerated Friction Test (AFT) apparatus. Contact Start Stop (CSS) and constant speed drag tests were performed using commercial rigid disks and two different air bearing slider types. Friction and stiction were captured during testing by a set of strain gauges. System parameters were varied to investigate their effect on tribology at the head/disk interface. Chosen parameters were disk spinning velocity, slider fly height, temperature, humidity and intercycle pause. The effect of different disk texturing methods was also studied. Models were proposed to explain the influence of these parameters on tribology. Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) were used to study head and disk topography at various test stages and to provide physical parameters to verify the models. X-ray Photoelectron Spectroscopy (XPS) was employed to identify surface composition and determine if any chemical changes had occurred as a result of testing. The parameters most likely to influence the interface were identified for both CSS and drag testing. Neural Network modelling was used to substantiate results. Topographical AFM scans of disk and slider were exported numerically to file and explored extensively. Techniques were developed which improved line and area analysis. A method for detecting surface contacts was also deduced, results supported and explained observed AFT behaviour. Finally surfaces were computer generated to simulate real disk scans, this allowed contact analysis of many types of surface to be performed. Conclusions were drawn about what disk characteristics most affected contacts and hence friction, stiction and wear.