Fadiga em dormentes de concreto reforçados com fibras de aço

A prestressed concrete monoblock railroad tie was designed to attend the characteristics of a Brazilian railroad track with 1,600 mm gauge and 320 kN axle load. Concrete ties specimens were manufactured without and with steel fibers in a volume fraction of 60 kg/m3 (0.76 % by volume), and three different initial prestress forces. Static and fatigue tests were carried out on the ties. Static tests showed that steel fibers increase the first crack and ultimate bending moments, increase significantly the slip force of the prestressing tendons, reduce crack width, add higher ductility to the ties and decrease the stress in the prestressing tendons. Under dynamic loading the steel fibers decreased the stress in the prestressing tendons by about 50%, which improved significantly the fatigue strength of the tie. A tie without fibers failed after only 150,000 cycles. However, a similar tie, with fibers, resisted 3,000,000 cycles without suffering fatigue failure.

Tectonics and paleogeography along the Amazon river

The main structural and geomorphological features along the Amazon River are closely associated with Mesozoic and Cenozoic tectonic events. The Mesozoic tectonic setting is characterised by the Amazonas and Marajó Basins, two distinct extensional segments. The Amazonas Basin is formed by NNE-SSW normal faults, which control the emplacement of dolerite dykes and deposition of the sedimentary pile. In the more intense tectonic phase (mid-Late Cretaceous), the depocentres were filled with fluvial sequences associated with axial drainage systems, which diverge from the Lower Tapajós Arch. During the next subsidence phase, probably in the Early Tertiary, and under low rate extension, much of the drainage systems reversed, directing the paleo-Amazon River to flow eastwards. The Marajó Basin encompasses NW-SE normal faults and NE-SW strike-slip faults, with the latter running almost parallel to the extensional axes. The normal faults controlled the deposition of thick rift and post-rift sequences and the emplacement of dolerite dykes. During the evolution of the basin, the shoulder (Gurupá Arch) became distinct, having been modelled by drainage systems strongly controlled by the trend of the strike-slip faults. The Arari Lineament, which marks the northwest boundary of the Marajó Basin, has been working as a linkage corridor between the paleo and modern Amazon River with the Atlantic Ocean. The neotectonic evolution since the Miocene comprises two sets of structural and geomorphological features. The older set (Miocene-Pliocene) encompasses two NE-trending transpressive domains and one NW-trending transtensive domain, which are linked to E-W and NE-SW right-lateral strike-slip systems. The transpressive domains display aligned hills controlled by reverse faults and folds, and are separated by large plains associated with pull-apart basins along clockwise strike-slip systems (e.g. Tupinambarana Lineament). Many changes were introduced in the landscape by the transpressive and transtensive structures, such as the blockage of major rivers, which evolved to river-lakes, transgression of the sea over a large area in the Marajó region, and uplift of long and narrow blocks that are oblique to the trend of the main channel. The younger set (Pliocene-Holocene) refers to two triple-arm systems of rift/rift/strike-slip and strike-slip/strike-slip/rift types, and two large transtensive segments, which have controlled the orientation of the modern drainage patterns. © 2001 Elsevier Science Ltd. All rights reserved.

Structural and geochronological studies of the Médio Coreaú domain, NE Brazil: Constraints on Brasiliano/Pan-African tectonic evolution in the NW part of the Borborema Province

Recent structural investigations and geochronological studies of rocks from the Médio Coreaú domain in the NW part of northeast Brazil's Borborema Province provide important constraints on the tectonic evolution of the region both preceeding and during the assembly of West Gondwana. Field observations of structural features and fabrics have revealed the presence of four distinct deformational phases in the MCD: D1, D2, D3 and D4. Only the early Paleoproterozoic gneisses record the D1 tectonic event and its preservation is cryptic owing to strong overprinting by the subsequent tectonic phases. The D2, D3 and D4 events affected younger supracrustal rocks and Neoproterzoic magmatic units, and U-Pb geochronological constraints show that all of these tectonic phases represent deformational events that occurred during Brasiliano collision between the West African craton and the NW part of the Borborema Province. The D2 phase, lasting between ca. 622 and 591 Ma, represents a frontal collision stage, which generated NW verging thrust-nappe systems, low-angle foliation, high-grade metamorphism and crustal anatexis. Transition to a strike-slip regime (D3) occurred at around 591 Ma when the region entered a phase of escape tectonics. During this time, the motion of crustal blocks towards NE and E was accommodated along numerous anastomosing shear zones. Syntectonic emplacement of granitoid plutons took place in transtensional domains of the shear zone system. The intrusion of late tectonic granitoids and rapid uplift and cooling of the orogen around 560 Ma as a result of D4 transpressional movements marked the end of the D3 transcurrent regime. These findings show that only the early Paleoproterozoic gneisses in the Médio Coreaú domain are polycyclic in nature. Rather than representing distinct orogenic events, the D2, D3 and D4 tectonic phases are a manifestation of progressive deformational events that developed in response to changes in the regional stress field during convergence and collision between the Borborema Province and its surrounding cratons.

Caracterização das falhas de transferência na porção norte da Bacia de Santos a partir da integração de dados geológicos e geofísicos

Structures transverse/sub-transverse to the shoreline have been identified and characterized on the precambrian basement outcrop on the continent adjacent to the northern Santos Basin. These structures were analyzed from images of digital elevation model SRTM 90m by extracting NW-SE lineaments that intersect the NE-SW foliation. The lineaments were selected, classified into 48 segments that extend toward offshore, and correlated with basin structures. In the basin 25 2D seismic sections, 12 well logs and data from potential methods were interpreted, identifying the key stratigraphic levels and the major structures. Structural maps of each horizon were generated. Six transfer faults (FTs) were recognized and named FT-1 to FT-6, whose extensions correspond to continental lineaments named FC1 to FC6. The FTs are related to the basin deformation and evolution. In seismic sections, these faults have lateral slip in flower structures, displacement inversions from normal at the top to reverse at the base, abrupt changes in thickness or even disappearance of the seismic reflectors. The structural map of the Basement and Top of the Rift shows control of some depocenters by faults and displacements in some areas. The maps of potential methods indicate that there are pronounced anomaly shifts in some areas, associated with FTs. Some seismic sections indicate reactivation of FTs when they intersect horizons from the basement until the most recent layers. The 3D integration of data facilitated the observation of the FT extensions in the continent discontinuity.

Latin America and the Caribbean in the World Economy 2011-2012: Continuing crisis in the centre and new opportunities for developing economies

Includes bibliography

Contexto tectônico dos granitóides neoproterozóicos da faixa de dobramentos paraguai, MS e MT

The Neoproterozoic Granitic Province from the southeast of Mato Grosso and Mato Grosso do Sul region is constituted by seven distinctive granitic bodies, emplaced in the epimetamorphic rocks of the Cuiabá Group and related to the evolution of Paraguai Folded Belt. The Northern portion crops out in Mato Grosso State and is constituted by São Vicente, Araguaiana and Lajinha batholiths; the Southern portion crops out in the Mato Grosso do Sul State and is represented the Sonora, Coxim Rio Negro and Taboco massifs. The structural evolution is evidenced by the presence of three deformational phases, the first one is characterized by axial planar foliation (S 1), parallel or sub parallel to S 0, with attitude N60E/70NW; the second constitutes the most important phase for the tectonic arrangement and is defined by a slaty and/or crenulation cleavages (S 2), with attitude N10W/30SW and contact metamorphism associated to the emplacement of granitic bodies, the third phase is characterized by a weak retrometamorphic cleavage (S 3) with attitude N10E/ 80NW, that evolves local and gradually to strike-slip shear zones. The geological data suggest that this province was formed syn- to post tectonic to the D2 deformational set associated to the end of the collisional event in the Southeastern of the Amazonian Craton.

Social Panorama of Latin America 1999-2000

Includes bibliography

Desempenho de semeadora-adubadora em função do prepa ro de solo e espa çamento da cultura do milho

The performance of machines and agricultural implements are of fundamental importance, especially when subjected to different types of soil tillage, and have to adapt to these conditions, in order to promote good operational performance. The objective of this study was to analyze the operational performance of a Marchesan Supreme Cop grain drill, equipped with four rows, spaced 0.90 m, according to three types of tillage: conventional tillage (plowing and two harrowing series), reduced tillage (scarification with a roller), and no-tillage, in areas previously seeded with maize (Zea mays L.), at two spacing measures (0.90 m and 0.45 m). The results indicate that the demand for power, tensile stress, and motor rotation, in the sowing operation, were not influenced by tillage and maize crop. The tractor wheel slip showed different results, being lower in no-tillage and higher in conventional and reduced tillage.

Aplicação do Processo Analítico Hierarquico (AHP) Para Priorização de Obras de Intervenção em Áreas e Setores de Risco Geológico nos Municípios de Itapecerica da Serra e Suzano (SP)

Municipal Plans of Risk Reducing (PMRR's) were produced in settlements in the municipalities of Itapecerica da Serra (SP) and Suzano (SP), covering areas at risk of landslides and washouts of banks of streams. The development of PMRR's provided the delimitation of areas of risk, the indication of intervention works in order to eliminate and / or reduce risks, and consequently an indication of the areas and priority sectors for implementation of intervention works. The prioritization of areas and sectors that should receive the works of reducing or eliminating risk was performed by an expert involved in risk mapping. Despite the specialist's judgment exercise caution, the decision regarding the priority sites for implementation of alternative interventions is subjective. Since there is no way to eliminate this subjectivity, the use of decision-making techniques is important to evaluate whether the expert's reasoning is consistent. One of the first techniques developed for multiple criteria is the AHP (Analytic Hierarchy Process). This paper describes the results of a research carried out in order to assess whether the use of Analytic Hierarchy Process contributes to the results of the indication of the areas and priority sectors for implementation of interventions can be considered more consistent than in situations where the priority occurs without the use of decision making techniques. Results were compared between the prioritization of interventions for implementation contained in PMRR's of Itapecerica da Serra and Suzano and those obtained from the use of Analytic Hierarchy Process (AHP). It was concluded that such techniques permits an evaluation of the expert's judgment is logically coherent, thus contributing to produce results more technically based.

Posicionamento por ponto preciso estático e cinemático: implementação e análise

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicações da teoria da potência complexa instantânea no cálculo das grandezas de Buchholz-Goodhue

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem do escoamento ao longo de evaporadores de serpentina com tubos aletados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho operacional de um subsolador de hastes com curvatura lateral (“Paraplow”), em função de diferentes velocidades de deslocamento e profundidades de trabalho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho de semeadoras-adubadoras de milho (Zea mays L.) em sistema de plantio direto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise teórico-experimental de um tabuleiro misto madeira-concreto composto por vigas circulares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)